WIPER MOTOR ASSLY.

The purchaser reserves the right to procure entire or bulk quantity (minimum 80% of Net Procurable Quantity) from the BLW Approved Vendors as available on U- VAM for Item BLW ID 2201032 sub item id 2201032001 in terms of Clause 3.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY 2024. The offers from developmental vendors may be considered for developmental orders totaling upto 20% of the net procurement quantity for vendor applicable in vendor directory as unconditional development.

The approval status of the firm for the said item will be reckoned as on the date of tender opening and not thereafter. But, in case of downgrading/removal/suspension/banning, etc., after opening of tender, such changes shall be taken into account while considering the offers. Bidders should submit documentary evidence; failing which, the offer is liable to be ignored.

Where there are not more than three Indian suppliers categorized as approved vendor for a particular item, vendors categorized as developmental vendors can be considered for placement of bulk order, without any quantity restrictions, considering factors such as past performance, capacity, delivery requirements, quantity under procurement, nature of item, outstanding order load etc. in a transparent manner, in terms of Clause 3.3.4 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY 2024.

AUTHORISATION: Participation by Manufacturers is preferred. Participating Agents/Dealers must provide authorization letter issued by the the manufacturer(s). Authorization letter should preferably be tender specific. In case of general authorization letter, it must clearly indicate the validity period/expiry date. Offers with general authorization letter silent on validity period/expiry date will not be considered for placement of order and such offers are liable to be ignored. Bidders must upload above authorization letter along with their offer failing which the offer is liable to be ignored.

Public Procurement Policy for Preference to Make in India shall be as per Clause 5.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JAN 2024.

This is an e-tender. Manual Offers/Bids for this tender will not be accepted under any circumstances, only electronic Offers/Bids shall be accepted

Have you mentioned MAKE/BRAND of the manufacturer(s) ?

3 Have you indicated the HSN code of your offered product?

Have you kept your offer validity as per "Condition for Responsiveness of Offer"?

Have you indicated the percentage of Local Content in the relevant column?

Have you submitted the details of location(s) where local value addition is made

Have you attached relevant document for MSE if you claimed benefits and preferential treatment as MSE firm?

Earnest Money Deposit (EMD) shall be as per Clause 23.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY 2024. EMD is compulsory and offers without EMD, except those exempted, will be summarily rejected. Vendors (other than those appearing on Vendor Panels of Approving Agencies) seeking exemption from EMD, shall have to attach scanned copy of requisite document alongwith offer in support of their claim for exemption, failing which their offer will not be considered eligible for exemption from EMD. Bidders claiming exemption shall also be required to sign the bid securing declaration as follows:- I/We certify that, my/ our offer is eligible for exemption from submission of bid security/ Earnest Money Deposit, in terms of the tender conditions. In case my/our claim to exemption from submission of bid security/Earnest Money Deposit is not found valid as per terms of the tender, I/we understand and accept that Railways has unquestionable right to summarily reject my bid and my offer shall not be considered for ordering. Further, I/we hereby understand and accept that if I/we withdraw or modify my/our bids during the period of validity, or if I/we are awarded the contract and on being called upon to submit the performance security/Security Deposit, fail to submit the performance security/Security Deposit before the deadline defined in the request for bid document/Notice Inviting Tender, I/we shall be debarred from exemption of submitting Bid Security/Earnest Money Deposit and performance security/Security Deposit for a period of 6 (six) months, from the date I/we are declared suspended disqualified from exemption from submission of EMD/SD, for all tenders for procurement of goods issued by any unit of Indian Railways published during this period .

Bidders must agree to furnish SECURITY DEPOSIT as applicable as per Clause 24.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY2024. The SD amount shall be @ 5% as mentioned in Claus e 24.3 o f Section I I of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY 2024.

Wherever SD has been exempted, for any reason, and the supplier fails to supply goods as per conditions of the contract, as amended from time to time, purchaser shall have the right to levy damages on the supplier for failing to comply with the contractual conditions, not by way of penalty, an amount equal to SD amount, as would have been applicable if the contract was with a non- exempted vendor. These damages shall be treated as recoveries outstanding against the vendor and dealt with accordingly.

AUTHORISATION: Participation by Manufacturers is preferred. Participating Agents/Dealers must provide authorization letter issued by the the manufacturer(s). Authorization letter should preferably be tender specific. In case of general authorization letter, it must clearly indicate the validity period/expiry date. Offers with general authorization letter silent on validity period/expiry date will not be considered for placement of order and such offers are liable to be ignored. Bidders must upload above authorization letter along with their offer failing which the offer is liable to be ignored. i) In a tender, either the authorized agent/dealer on behalf of the Principal/ the manufacturer(s) or the Principal/the manufacturer(s) itself can bid, but both cannot bid simultaneously for the same item in the same tender. Further, against a particular tender, one Principal/the manufacturer(s) should not issue Tender Specific Authorization to more than one agent/dealer. Such offers with different terms against a particular product if treated as ambiguous offers, the bidder(s) or their Principal/the manufacturer(s) will have no right to lodge any claim. ii) If an authorized agent/dealer submits bid on behalf of the Principal/ the manufacturer(s) , the same agent/dealer shall not submit a bid on behalf of another Principal/the manufacturer(s) in same tender for the same item/product.

Goods & Services Tax (GST): As per Clause 9.0 and all sub-clauses of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY2024. All tenderers to quote correct HSN code and corresponding GST rate for the item/items quoted. Misclassification in HSN code, if quoted by any bidder, shall be dealt as per Clause 9.0(iv) of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY 2024.

In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism [RCM] and deposit the same to the concerned tax authority.

Bidders shall also give Declaration as below:- I/We agree to pass on such additional input tax credit as may become available in future under GST scheme, in respect of all the inputs used in the manufacturing and/or supply of final goods/services on the date of supply by way of reduction in price and advise the purchaser accordingly

Benefits to Micro & Small Enterprises (MSEs) shall be as per Clause 4.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) January 2024. Notes:- i). Criteria for classification of Enterprises based on investment and turnover vide Gazette Notification dated 26.06.2020, as amended time to time, issued by the Ministry of MSME is applicable in the tender. In case conditions contained in above notification contradict with any of the tender conditions, conditions contained in above notification, as amended, will prevail. ii). As per extant guidelines an enterprise registered as MSE firm with any other organization under the Ministry of Micro, Small and Medium Enterprises shall register itself under UDYAM Registration for getting MSE benefit under this clause. Classification of Enterprise as Micro, Small or Medium Enterprise shall only be considered on the basis of UDYAM Certificate. Vendors claiming to avail benefits and preferential treatment extended to Micro and Small Enterprises (MSEs) must necessarily upload relevant documents with their offer i. e. complete UDYAM certificate indicating social status of the MSE. iii). MSE benefit will not be applicable for the traders/authorized dealers/agents. iv). Vendors claiming MSE benefits/preferential treatment, despite upward re classification, must upload document confirming their MSE status within a span of 03 years preceding from the date of closing of the tender, else status of such vendors shall not be considered as MSE.

Vendors claiming to avail benefits and preferential treatment extended to Micro and Small Enterprises [MSEs] must necessarily upload relevant documents with their offer in terms of Clause 4.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) January 2024

Criteria for classification of enterprises based on investment and turnover vide Gazette Notification dated 26.06.2020, as amended time to time, issued by Ministry of Micro, Small and Medium Enterprises is applicable in the tender. In case, conditions contained in the above notification contradict with any of the tender conditions, conditions contained in the above notification, as amended, shall prevail in terms of Clause 4.4 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) January 2024.

LAND BORDER CLAUSE: All bidders shall confirm declaration as below in terms of Clause 5.15 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) January 2024 in compliance of restrictions under Rule 144(xi) of GFR- 2017 :- a) I have read the clause regarding restrictions on procurement from a bidder of country which shares a land border with India. b) I certify that this bidder is not from such a country or, if from such a country, has-been registered with the competent authority. c) I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the competent authority is attached). If the bidder fails to give such declaration, as above, then it will be presumed that the contents of above declaration have been read and unconditionally agreed and accepted by the tenderer. If any tenderer is not agreeable to this declaration they have to categorically mention about the disagreement in Techno Commercial Deviation.

Bidders to submit details of location(s) where local value addition is made. In case no details are furnished, it will be presumed that works address(es) of manufacturing in India are the location(s) of local value addition.

UNLOADING OF MATERIAL: Unloading of Material against non stock item to be arranged by supplier at consignee end and against stock PO to be arranged by consignee at their end.

Firm must carefully examine the contents of PO and in case of any discrepancy noticed, shall make a representation within 7 days from the date of PO. Any representation thereafter for DP re- fixation etc. shall be summarily rejected

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.