SPECIAL REPAIRS TO OFFICERS MD QUARTERS AND ORS MD QUARTERS AT NCC ENCLAVE UNDER GE (AF) GORKHPUR

Amount

M&L for complete removal of existing treatment from surface of wall and applying two coat of cement base paint and a coat of primer over complete all as specified and directed.

M&L for complete removal of existing treatment from surface of wall and applying two coat of oil bound distemper by using roller and a coat of primer over a coat of 1mm thick Birla putty as base coat complete all as specified and directed.

All as per item No. 2 above but two coat of oil bound distemper on ceiling surface.

M&L for preparation of old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surface of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.

Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified as directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall, finished surface even and smooth without using extra cement complete all as specified as directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instruction finished even and smooth without using extra cement complete all as specified as directed. Note: WPC will be measured and paid separately.

M&L for rendering 5mm thick in CM 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified as directed.

M&L for preparation new plastered surface of wall and applying two coat of oil bound distemper by using roller and a coat of primer over a coat of 1mm thick Birla putty as base coat complete all as specified and directed.

M&L for preparation new plastered surface of ceiling and applying two coat of oil bound distemper by using roller and a coat of primer over a coat of 1mm thick Birla putty as base coat complete all as specified and directed.

M&L for preparation new plastered surface wall and applying two coat of cement base paint over one coat of alkali resistant primer complete all as specified and directed.

Supply only liquid water proofing compound.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

All as per item No. 14 above but 20mm bore.

S&F 15mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as specified and directed.

All as per item No. 16 above but 20mm bore.

S&F in repair stop valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos bracket, complete all as specified and directed.

S&F in repair 32 mm dia bore waste fittings brass chromium plated fixed to hand basin with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and directed.

S&F in repair 32mm dia, 60 to 75 cm long PVC waste pipe with fly nut, coupling for sinks/urinals or wash basins complete all as specified and directed.

S&F in repair 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) EWC including trap, seat cover, including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floor complete all as specified and directed.

S&F in repair vitreous china water closet squatting pan, 'Orrisa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.

S&F in repair 10 litre capacity PVC low level flushing cistern with ball valve and handle / push button, 32mm dia PVC flush pipe complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts, of length 450mm complete all as specified and directed.

S&F in repair chromium plated shower roses with or without swivel joints, any size with arm incl fixing to steel pipe or union complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and directed.

S&F in repair stainless steel sink with drainage board made out of 1mm thick steel sheet for kitchen with plug, washer waste pipe, MS cantilever bracket, connection union overall size 915x460mm with bowl size 410x310x160mm complete all as directed.

S&F in repairs stainless steel plate rack of minimum size 970x770x230mm of standard quality, fixed to wall with wooden gutties and screws complete all as specified and directed.

S&F in repairs brass CP wall mixer with hand shower and over head (Three way) for mixing hot and cold water screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and directed.

S&F in repairs brass CP wall mixer with over head shower (Three way) for mixing hot and cold water screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and directed.

S&F in repairs brass CP wall mixer (Two way) for mixing hot and cold water screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and directed.

S&F in repairs brass CP wash basin mixer (Two way) for mixing hot and cold water screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and directed.

S&F in repairs angle valves, 15 mm dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs brass chromium plated health faucet with 15mm dia reinforced pipe complete all as specified and directed.

S&F in repair soap dish CP any size complete all as specified and directed.

S&F in repair toilet paper holder complete all as specified and directed.

M&L for granite (of any type) 18 to 20mm thick machine cut and polished bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over & including15 mm thick screed bed in CM 1:6 etc complete all as specified as directed.

All as per item No. 42 here in above but in skirting over 10 mm thick cement mortar in 1:3.

Rounding to edge of stone slab one edge, such on in stop, cooking platform, and other similar situation complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over screed bed 10 mm thick in CM 1:3 complete all as specified and directed.

S&F non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm and n.exc. 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and directed.

All as per item No. 47 above but in thick as in dado/ skirting including 10mm thick rendering screed in CM 1:3.

M&L for light shade vitrified ceramic tiles (Ultra Charged) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and directed.

All as per item No. 49 above but in thick as in dado/ skirting including 10mm thick rendering screed in CM 1:3.

S&F in repair CP grating 125 mm size complete all as specified as directed.

S&F in repair alumnium curtain rod (Dropery rod) plastic coated 20 mm dia including end Knobs fancy type nickel polished golden or silve colour as per sample. complete all as specified as directed.

S&F in repairs fancy type brackets for fixing of 20mm dia dropery rod complete all as specified and directed.

S&F in repairs fancy Knob for fixing of 20 mm dia dropery rod complete all as specified and directed.

M&L for 35 mm thick IInd class hard wood plain framed, paneled shutter (two panel or more) with lock rails and panel of 9 mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veering on both faces. The size of rail and style as per I.S. 1003(Part-I) 2001 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame glazed with putty or fixed beads complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 sqm each and removing from site complete all as specified and directed.

All as per Item No. 58 above but exc 1.50 sqm and n.exc 4 sqm each.

Taking down shutter of any description n.exc 1 sqm each and removing from site complete all as specified and directed

All as per item No. 60 above but exc 1 sqm and n.exc 2 sqm each.

M&L second class hard wood plain, solid, chowkhat and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified as directed.

M&L for second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/gauge etc, without sash bars, mitered and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I (2009).

S&F 30mm thick flush shutter, factory made, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and as directed.

S&F Factory made solid PVC Chowkhat /Door frame of size 50x47mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part-II (2010) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned in SSR-2010.

All as per item no. 66 above but wire gauge shutter i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes.

S&F 300mm long aluminium anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts, sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 75mm size mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F 100mm size mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolt, complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolt, complete all as specified and directed.

S&F aluminium anodized pressed handle, cast type of size 125mm, complete all as specified and directed.

S&F aluminium anodized pressed handle, cast type of size 150mm, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flap 20mm when open complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in filling of hold fast hole complete all as specified and directed.

M&L for preparing surfaces of chowkhat of new or old, of any description and girth not otherwise described, treating ends of posts, back of chowkhats, etc area tarred exc 0.1 sqm but n.exc 0.5 sqm each complete all as specified and directed.

M&L for preparation of surfaces of wood and wood based materials, steel and iron work, new or old, of any descriptions and girth, treated with tar or coal tar black paint to treating small articles such as stop, covers, gully gratings, hold fasts, ends of posts, backs of chowkats etc area n.exc 0.1 Sqm complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 2nd class hard wood cleats as in small fitting such as brackets of any type latch and hinge blocks shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu.cm each etc complete all as specified and directed.

Dismantling MS grills/guard bars from window frames / verandah railing complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, fillets etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of water tanks etc ant type of work conforming to Fe 290, grade E-165 complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and pre-cast articles complete all as specified and directed.

M&L for brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

S&F in repair rotational moulded polythylene water storage tanks 500 ltr capacity triple layered ISI marked white colour (cylindrical vertical with closed top) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwed for iron pipe 20mm bore complete all as specified and directed.

All as per item No. 88 above but 1000 ltrs capacity.

Demolition of cement concrete un-reinforced in ground floors and paving not exc 15 cm thickness below or above ground level complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and directed.

Demolition and breaking up drain pipes SWG, AC or RCC set in cement mortar 100mm dia complete all as specified and directed.

S&F 110mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trench complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece double, (double Y) equal or unequal with access door complete all as specified and directed.

S&F 18 mm thick Rajshri PVC Celuka ply of grade1 quality (or equivalent PVC ply of other make as approved by GE) of both side prelem fixed with screws, solvent cement/adhesive to make cupboard shutter sides top and bottom, shelves inside the cabinet and shutter or drawer complete all as specified and directed.

M&L for made PVC shelf / partition of required size consisting of panel of 18 mm thick Celuka PVC ply of make Rajshree (or equivalent PVC ply of other make as approved by GE) and supporting the shelf / partition and shall provide with PVC runners in thee sides of shelf size 18x18mm as per required length. The front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm with 1 mm thick PVC sheet of density 600 kg/Cum density manufactured by an ISO-9000 certified company, using solvent cement etc complete all as specified and directed.

S&F 75 mm size L/Z type stainless hinges fixed screws openable at 110 degree for cabinet shutter complete all as specified and directed. Make: KAFF or equivalent in other maks

S&F stainless steel handles of 100 mm size for kitchen cabinet shutter complete all as specified and directed.

S&F CP SS wire basket (storage basket) pull out type for large utensils, size 380 to 610 mm with necessary fitting clips etc. complete all as specified and directed.

S&F CP SS wire basket (storage basket) pull out type for cup and soucer baskets, size 380 to 610 mm with necessary fitting clips etc. complete all as specified and directed.

S&F CP SS wire basket (storage basket) pull out type for plates basket, size 380 to 610 mm with necessary fitting clips etc. complete all as specified and directed.

S&F CP SS wire basket (storage basket) pull out type for cutlery basket, size 380 to 610 mm with necessary fitting clips etc. complete all as specified and directed.

S&F CP SS telescopic channel 450mm long, zink (35Kg) make-Sleek (Asian paint ) code HICH-1356) or equivalent complete all as specified and directed.

S&F pressed steel frames of profile 105x60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Pressed steel frames of profile 125x60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

S&F powder coated aluminum window shutters, without sash bar, aluminum section weighing 0.55 kg/m, including necessary joining cleat, glazing clips, rubber packing, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F powder coated anodised aluminium (sliding/ hanging type) windows with three track bottom track size 92x29.5 x2mm thick, side & top track frame size 92x29.5x2mm thick and shutter aluminium anodised 39x20x2mm thick including necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted / plain glass in panels and stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm including all fittings & fixture complete all as specified and directed.

S&F 5.5mm thick sheet glass, ordinary quality & glazing with oil putty / wooden beading / rubber packing around the glass in square exc 0.5 sq.m in each pane including hacking out old glass of any description complete all as specified and directed.

S&F exterior designer tiles of approved size and pattern with one or more colour combination 20mm thick of approved shade and finish, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor including 15mm thick screed bed in CM 1:4 complete all as specified and directed. Make: Ultra or Duracrate.

M&L for PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate as in benching, padding, coping etc including necessary form work complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.

Taking down rain water/vent pipe of any description including fittings etc complete all as specified and directed.

S&F mild steel for bands, straps, supports or stays for rainwater, ventilating pipes, caging for PVC water tanks and any type of mild steel work etc. complete all as specified and as directed.

S&F 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trench complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for 150mm bore salt glazed stoneware drain pipe grade ‘A’ laid in trenches and jointed with cement sand mortar 1:2 and testing complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including under, and hunching against the sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and directed.

M&L for pre cast cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L for applying one coat of hot blown bitumen grade 85/25 @ 1.20 Kg/sqmts complete all as specified and directed.

M&L for applying a coat of bitumen primer @ 0.50 ltrs/sqmts and allow to dry complete all as specified and directed.

M&L for applying APP modified polymeric membrane of weight not less than 3.2 to 3.5 Kg/Sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/ fused by flame torch application as per manufacturer instructions complete all as specified and directed.

S&F 40mm bore steel water tubing galvanized light grade to be fitted in sunken portion complete all as specified and directed.

M&L for PCC, type E-2, 1:5:10 using 40 mm graded aggregate as in sunken portion, mass filling concrete complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as sub base of floor finished even and fair complete all as specified and as directed.

Dismantling brick or brick tiles laid bedded and pointed in any type of mortar as on roof etc complete all as specified and directed.

Dismantling / striping out of existing roof treatment (tarfelt & roof plaster etc) including PCC padding of any description, and any thickness including backing, and remove the debris complete all as specified and directed.

Roughening surfaces of old concrete floor by sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed.

M&L for 40mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding to maintain proper slope mixed with liquid water proofing compound @100 ml per 50 Kg of cement bag, complete all as specified and directed. Note:-WPC will be measured & paid separately)

M&L for 10 mm thick rendering on fair faces of brick work or on concrete surface in CM 1:3 finished surface even and smooth without using extra cement mixed with liquid water proofing compound @100 ml per 50 Kg of cement bag complete all as specified and directed. Note: WPC will be measured and paid separately.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerb or mud stops, rounded or chamfered on edges surface finished even and smooth without using extra cement, mixed with liquid water proofing compound @100 ml per 50 Kg of cement bag complete all as specified and directed. Note: WPC will be measured and paid separately.

M&L for providing roof treatment as under:- (a) Applying a coat of bitumen primer @ 0.25 ltrs/sqmts and allow to dry. (b) Applying one coat of hot blown bitumen grade 85/25 @ 1.20 Kg/sqmts. (c) Applying APP modified polymeric membrane of weight not less than 3.0Kg/Sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions.

M&L for 20cmx20cmx20 mm thick cement concrete tile laid over 15 mm thick screed in CM 1:4 as bedding layer using 100% coarse sand jointed including jointing and pointing the tile in CM 1:3 mixed with linseed oil @ 5% by weight of cement complete all as specified and directed.

M&L for machine cut Pre Polished Kota stone slab 18 to 20mm thick in single piece in stair case as in flooring, laid over and including cement screed bed 20 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified.

M&L for machine cut pre polished Kota stone slab 18 to 20mm in thick single piece in stair case as in skirting/ dado or on vertical surfaces laid over and including cement screed bed 10 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified.

M&L for RCC 1:1½: 3 type A-1 using 20mm graded stone aggregate as in chajja, fins, facia and similar suspended work including necessary form work complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for including necessary form work complete all as specified.

S&F mild steel TMT bar 8mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for foundations, columns, beams and slabs hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F hasp and staple, aluminum alloy, anodized, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws, size 100 mm complete all as specified and directed.

M&L for providing precast cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings set in cement mortar 1:4 complete all as specified and directed

M&L for post construction ATT providing and injecting chemical emulsion along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litre per linear meter including drilling and plugging holes etc in apron complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in surface channels and drain complete all as specified and directed.

Demolition of reinforced concrete of any description & in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

S&F in repair gun-metal 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair brass chromium plated two way angle cock, of 15 mm bore complete all as specified and directed.

Supply and fixing glass corner shelf fancy type 250x250mm 6mm thick fixed with brass bracket and screwed all as specified and as directed.

M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing, cutting n.exc. 10cm girth complete all as specified and directed.

Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for concealed point wiring for one light/fan point controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed. Note:- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

All as per item No. 151 above but for one 5 Amps socket point controlled by one 5 Amps switch on same board.

All as per item No. 151 above but for one 5 Amps socket point controlled by one 5 Amps switch on independent board.

All as per item No. 151 above but for one bell point controlled by one 5 Amps bell push.

All as per item No. 151 above but for one light point controlled by two 5 Amps two way switch.

M&L for point wiring with (FRLS) Fire retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of GI terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Fire retardant low smoke PVC insulated copper earth conductor 1.50 sqmm connected to common earth and earth dolly complete for 3/6 pin 15 Amps socket outlet on independent board complete all as specified and directed. Note:-(i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, shall be measured and paid separately.

S&F switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

S&F switch piano, flush type 5/6 amp, single pole, Two way 240 volt complete all as specified and directed.

S&F switch piano, flush type 15 amp, single pole, one way 240 volt complete all as specified and directed.

S&F socket outlet, 3/5 pin, 5/6 amps flush type 240 volt complete all as specified and directed.

S&F socket outlet, flush type, 2 in 1, 3 pin 5 & 15 Amps, 230 volts, multipurpose complete all as specified.

S&F bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.

S&F Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

S&F lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F in repairs 10 watt LED bulk head fitting complete all as specified and directed. Make:-Havells Cat part No. HEXAFT10WLED857SSYMB OPC or equivalent in Bajaj/ Philips/ CG/ WIPRO

S&F in repairs 10 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:-Havells Cat part No. LUMILINEPLUSBS10WLED865 SPCSS or equivalent in Bajaj/ Philips/ CG/ WIPRO

S&F in repairs 20 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. LUMILINEPLUSBS20WLED865 SPCSS or equivalent in Bajaj / CG.

S&F in repairs, testing energy saving, die cast aluminium housing IP 65 protection, 48 W LED street light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:- Havells Cat No. ENDURAPEARLNEOSL48W LED757PASYTOPC or equivalent in Bajaj/ Philips/ CG/ WIPRO

S&F exhaust fan single phase 230/240 volt AC 300mm sweep, with painted louvers, metal body, including cutting holes of suitable size in wall, grouting of nuts and bolt etc if required for fixing fan and making good to match the existing surface and making connection with twisted copper flexible wire 23/0.0076mm complete all as specified and directed. Make: Havells/Bajaj/CG.

S&F in repairs factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs including one FP MCCB/MCB 100/63 Amp as incomer and 24 Nos MCBs as required as outgoings complete all as specified and directed.

S&F in repairs factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F in repairs MCB, SP, 6 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F in repairs MCB, SPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F in replacement sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

M&L for concealed sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable (FRLS) and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable (FRLS) for earth continuity, drawn in & including suitable rigid steel conduit pipe with all fittings ISI mark of Ivory/Grey/white colour medium grade for flame proof fixed in wall or on ceiling complete all as specified and directed. Note: (i) Length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length. (ii) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing

M&L for concealed sub main wiring with 2 Nos single core PVC insulated unsheathed 6.0 sqmm stranded copper conductor cable (FRLS) and 1 No single core PVC insulated-unsheathed 4.0 sqmm stranded copper conductor cable (FRLS) for earth continuity, drawn in & including suitable rigid steel conduit pipe with all fittings ISI mark of Ivory/Grey/white colour medium grade for flame proof fixed in wall or on ceiling complete all as specified and directed. Note: (i) Length of 2 No 6.0 sqmm conductor cable, 1 No 4.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length. (ii) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing

Disconnecting, taking down & removing carefully the existing ceiling fan, and hanging/fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction of the department complete all as specified and directed. Note:- (i) The replacement of defective/ nonfunctional parts shall be measured & paid separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item. (ii) Burnt out windings replaced, shall be measured and paid for separately under appropriate item here-in-after. (iii) The rates for above items are deemed to include transportation charges from E/M store yard to workshop and vice versa.

M&L for servicing / overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete all as specified and directed.

Taking out & removing old burnt-out winding and rewinding of motor of ceiling fans/exhaust fans 1200/1400/300/400 mm sweep of any description and rewinding of fan motor with appropriate size super enameled copper wire approx 200 gram including insulating material such as illumines paper, letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of the department. Make of winding wire: Atlas/Finolex/ Devi Dayal

M&L for painting of existing fans of any description (ceiling fan) with applying one coat of synthetic enamel paint (White) by spray machine including preparation of existing decorated surfaces of fans including engraving MES No. of fan in capital letters of height not less than 20 mm on fan body all as specified and directed.

M&L for earthing with Galvanised iron earth plate electrode 600x600 mm and 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal GL) with top of earth plate not less than 1.5 mtr below GL connected to GI earth lead wire of size 4 mm dia connected to earth plate electrode by means of GI nuts, bolts and washers of galvanised iron or steel protected with and including 15 mm dia med grade ISI marked GI pipe upto a length of 7.5 mtr long as shown in electrical plate No 5 of MES Sch Part-I with and including PCC 1:3:6, C-1 pit with cover or RCC 1:2:4 B1 reinforced with welded steel wire fabric not less than 4 kg per Sqm watering arrangement within 20mm dia GI med grade pipe ISI marked, GI funnel with GI mesh, filling with mixture of common salt and charcoal necessary excavation and earth work in soft/loose soil including connected to earthing test point, and main switch/DB, testing and commissioning complete all as specified and directed. Note: (i) GI earth wire with GI pipe protection upto 7.5 mtr shall be deemed included in the item.

S&F single phase electronic tamper proof energy meter confirming to IS 13779 with box including sealing with cable connection complete all as specified and directed. Make : HPL/Secure/L&T

S&F in replacement LED lamps 9 watts complete all as specified and directed. Make:- Havells Cat part No. LHLDEUEEMC8R009 or equivalent in Bajaj /CG.

Supply and fixing in repairs wall bracket light Brass made bracket with 140 mm x 78mm rectangular base, 210 mm length U shaped brass arm 60 mm dia gallery with 2 pin brass holder tipped with 125 mm length MS Powder coated plate. Frosted glass shade 155 mm x 129 mm finish dull black powder coated & lacquer coated. model no.- MBBS -801 of mepro or equivalent including one number of 09 watt led bulb complete all as specified and directed.

Taking down carefully electric meter by disconnecting all electric connection and kept at site and refixing the same after completion of wring including suitable concealed pressed steel box 175mm x 100 mm x 60mm with BL sheet connecting of electric connection all as specified and directed.

M/S SHAILZA TRADERS

ANIRUDH ENTERPRISES

GANGA TRADERS