NFVP/CICO/3409

Amount

Subhead A

Earthwork in excavation in areas or foundations,trenches, pits, drains pits including dressing of sides and ramming of bottoms including getting out the excavated soil in :

a) Black cotton soil / yellow soil / moorum etc.

Supplying & filling in areas, foundation trenches, plinths, sides of foundations etc. and consolidating the same by ramming and watering complete , using :

a) Available excavated earth ( excluding supply ).

Carriage of available surplus excavated earth /rock / construction debris by mechanical transport or any other means including,loading unloading and disposal of excavated earth / rock /construction debris any where in NFL complex /township area;disposed earth to be levelled and dressed as per directions of Engineer-in-Charge.

Cleaning of storm water drains including removal of all kinds of rubbish, garbage,boulders,stones,soil, weeds,bushes etc. and disposal of the same to the approved dumping yard / anywhere in township area including loading,unloading and transportation by mechanical transport as per directions of Engineer-in-Charge; a) Drains with bottom width upto 1.00 Mtr.

Providing and laying cement concrete in foundation, footing, sub bases of pavements, floors, beds excluding cost of centring and shuttering complete :

(b)1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20/12.5 mm size)

Brickwork with locally available bricks in foundations and plinth in cement mortar 1:6 (1 cement: 6 coarse sand).

Brickwork with locally available bricks in superstructure upto floor two level in cement mortar 1:6,(1 cement: 6 coarse sand).

Half brick work with locally available bricks in 1:4 cement mortar (1 cement : 4 coarse sand) in superstructure / foundations & plinth.

Providing kerb (BANNI) of width 50 mm and height upto 50 mm in plain cement concrete 1:2:4 (1 cement: 2coarse sand: 4 graded stone aggregate 12.5 mm nominal size) including chipping the existing floor and making good the same complete in door sills etc. as per directions of Engineer-in-Charge.

Cement concrete flooring with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20/12.5 mm nominal size) finished with a floating coat of neat cement strips in joints etc. wherever required complete :

(a) 25 mm to 40 mm thick.

Preparing surfaces of masonry and applying cement plaster 1:6 (1 cement: 6 fine sand) :

a) 12 mm thick.

b) 15 mm thick.

Repair of plaster in patches of area 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground as per directions of Engineer-in-Charge using cement mortar 1:4 (1cement : 4 fine sand). .

Providing & fixing locally available good quality MS wire chicken mesh with MS nails wherever required complete as per directions of Engineer-in-Charge.

Repairing of leakage from floor traps/heel rest bends from first floor slabs including cutting the existing floor/walls and re-making the same with cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 12.5/10 mm nominal size) to ensure water tightness of the area treated complete.(The floor traps, P traps and WC required to be replaced shall be paid separately.)

Fixing of Cooler stands to walls including making pockets of 15 cm. x 15 cm. x 20 cm. size and grouting the cooler stand with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) including making good the walls as per directions of Engineer-in-Charge. (Cooler stand for fixing shall be provided by NFL free of cost).

Roof grading at all heights with cement concrete1:2:4 ( 1 Cement : 2 Coarse sand : 4 stone aggregate 12.5/10 mm and down size) for laying water proofing treatment on roofs.

Providing and fixing pressed steel Door/Window frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinge jamb,lock jamb, head and if required angle threshold of MS flat of section 50x25 mm or base ties of 1.25 mm pressed MS welded, adjustable lugs with split and tail to each jamb including MS butt hinges 2.5 mm thick with mortar guards, lockstrike plate and applying a coat of good quality steelprimer complete including removing the old damaged door/window frame as per directions of Engineer-in-Charge :

a) Profile 'B' (single rebate).

b) Profile 'C' (double rebate).

Supplying and placing at site, Red Sandstone 40 mm thick, for chamber covers including carraige to site and placing on chambers complete.

Providing and fixing wooden cleats made out of 2nd class Teak wood of required size for doors /windows including removal of old cleats wherever necessary complete as per directions of Engineer-in-Charge.

Renewing glass panes with putty and glazing clips/wooden fillets wherever necessary including the cost of glass sheets which shall be supplied by the contractor at his own cost :

a) Using plain Glass sheet 2.3mm to 3mm thick.

Supplying and fixing new wooden fillets with nails wherever necessary (Length of the fillets actually fixed in position shall be measured for payment).

Providing and fixing/replacement of MS safety/shutter locks (6 lever 3 movement lock) of size 100 x 80 x 30 mm with 30 mm wide 6 mm thick 65 mm long locking strip for panelled/flush door shutters including making key holes in shutters and welding of channel/U-clamp/locking strip to MS sheet frame to suit locking lever size.

Taking out existing damaged window shutters and providing and fixing new glazed window shutters using plain glass panes 2.3 to 3 mm thick including welding of MS butt hinges wherever required, removal of handles/ tower bolts from old shuttersand refixing the same to new shutters with necessary screws :

Second class teak wood, 30 mm thick WINDOW shutters.

Taking out existing damaged window shutters and providing fixing new fly proof wire gaugewindow shutters using galvanised MS wire gauge of designation 85 G with wire of dia 0.56 mm including welding of MS butt hinges wherever required, removal of handles/ tower bolts from oldshutters and refixing the same to new shutters with necessary screws :

Second class teak wood, 30 mm thick WINDOW shutters.

Taking out existing damaged door shutters and providing & fixing new panelled door shutters with 12 mm thick commercial ply of good qaulity quality and manufacture with commercial veneering on both faces, all frame members of the shutters shall be straight, out of one piece without any warp or bow , including welding of MS butt hinges wherever required, removal of handles/ tower bolts/locking bolt from old shutters and refixing the same to new shutters with necessary screws :

Second class teak wood 35 mm thick PANELLED DOOR shutters.Taking out existing damaged door shutters and providing & fixing new wire guage door shutters using galvanised MS wire gauze of average aperture width of 1.18 mm with wire of dia. 0.56 mm frame members of the shutters shall be straight,out of one piece without any warp or bow ,including welding of MS butt hinges wherever required, removal of handles/ tower bolts /lockingbolt from old shutters and refixing the same to new shutters with necessary screws :

Second class teak wood 35 mm thick WIRE GAUGE DOOR Shutters as per site requirements.

Taking out existing damaged door shutters and providing & fixing new flush door shutters ,non-decorative type, core of block board construction with frame of Ist class hard wood and well matched 3mm thick commercial ply veneering with vertical grains or crossbends & face veneers on both faces of shutter including and welding / screwing nickle plated bright finished MS piano hinges with necessary screws wherever required, removal of handles/tower bolts /locking bolt / hasp and staple from old shutters and refixing the same to new shutters with necessary screws complete :

a) 25 mm Thick shutters for Cup Boards.

b) 35 mm Thick shutters for Doors.

Dismantling of already removed / damaged panelled/glazed or flyproof doors/ windows shutters and remaking of new door/window shutters byusing old styles, beadings etc. including fixing of these repair door/window shutters in position, including removal of damaged door /windows, if and wherever required complete. The extra plywood /new wooden pieces, new fittings such as tower bolts, sliding bolts,handles,hinges etc. if and wherever required and provided shall be paid separately. In case of glazed/ flyproof shutters the glass and wire guage fixed shall be paid separately. (MS screws, nails, fevicol etc.required for making the new shutter out of dismantled scrap as defined above, shall be arranged by the contractor at his own cost) :

a) Panelled Door shutters.

Removing of existing shutter and refixing of the same for doors/windows after necessary repair work including fixing of all fittings, welding of hinges wherever required complete as per directions of Engineer-in-Charge (The timber, plywood and wire gauge, glass panes & fittings required for repair will be paid separately).

Repair/rectification/adjustment of shutters of doors/windows/cup boards (in position, without taking out the same ) including planing edges of style/rail & refixing of hinges or/and adjustment of tower bolts sliding bolts etc. complete and rectification of door cleats including providing and replacing damaged screws, nuts & bolts,nails etc. wherever necessary as per directions of EIC.

Providing and fixing galvanised MS wire gauge 0.56 mm nominal dia. of wire and 1.18 mm average aperture width fixed with wooden beading & screws/nails wherever necessary in doors, windows and clerestory windows including removal of the damaged wire gauge wherever required.

Providing and fixing black stove enamelled mildsteel fittings with screws etc.complete :

(a) Tower bolts (barrel type) 100 to 200 mm long.

(b) MS sliding door bolts 250 mm x 16 mm.

(c) MS handles 100 mm long.

Providing & fixing mild steel safety hasp and staple, CP / black stove enamelled with necessary screws etc. : 100 mm size.

Providng and fixing bright finished or/and black enamelled MS superior quality Helical door spring including welding in frames/fixing with screws wherever required complete.

Providing and fixing wooden brackets with wooden plugs embedded in walls by fixing of brackets to two plugs with screws including cutting of brickwork/concrete work and making good the same complete for curtain rod.

Providing and fixing curtain rod of MS conduit pipes of 20 mm dia. and of required length complete.

Repairing of curtain rod brackets/pelmets using old brackets with re-fixing of wooden plugs and necessary screws etc. complete.

Providing and fixing 12 mm thick Commercial plywood plain lining of good qaulity make including fixing with necessary screws/nails wherever required (Actual measurements of plywood fixed in position shall be taken for the purpose of payment).

Removing and refixing looking mirror with necessary brass/steel screws and washers etc. complete.

Providing and fixing looking mirror of size 600x450mm of superior glass of good qaulity quality and make including providing and fixing asbestos sheet ground with screws wherever required complete.

Providing and fixing MS piano hinges of overall width upto 35mm finished with nickel plating and fixed by welding and/or by screws etc. complete.

Providing and fixing 0.63 mm thick Aluminium sheet to doors including cutting and fixing with suitable nails/screws complete. ( The area of Aluminium sheet actually fixed in position will be measured for payment).

Providing and fixing white vitreous china water closet squatting pan of size 580 mm x 440 mm (Orrisa pattern WC pan) of good qaulity make including dismantling and disposal of existing WC, floor etc.wherever required and making good the area around the newly fixed WC complete.

Providing and fixing white vitreous China pedestal type (European type) water closet with seat and lid of good qaulity make with CP brass hinges and rubber buffers, cutting and making good the walls and floors wherever required including removal of old WC and disposal of old WC complete.

Providing and fixing 10 Ltr. low level PVC flushing cistern with all fittings complete including removal of old /damaged cisterns.

Providing and fixing white vitreous china wash basin with 32/40 mm CP brass waste including making all connections, cutting and making goodthe walls with brackets wherever required including removal of damaged wash basin:

a) Flat back Wash Basin of aproved make of size 550 X 400 mm.

Providing & fixing CP brass waste for sink or wash basin including dismantling and laying of GI waste pipe complete :

a) 32 mm dia.

b) 40 mm dia.

Providing and fixing plastic seat with lid of good qaulity quality for pedestal type WC pan (EuropeanWC) with hinges, rubber buffers etc. complete :

a) Black/White plastic seat with lid.

Providng and fixing 100 mm dia. CP mild steel sheet grating (drain jali) of good qaulity design & quality for floor traps complete as per directions of Engineer-in-Charge.

Providing and fixing PVC connection pipes with unions including removal & disposal of old PVC connection pipes :

a) 30/45 cm. long and 15 mm nominal bore.

Providing and fixing G.I. bend of good qaulity quality for waste pipe of high level CI flushing cistern including removal of old pipe, fixing of pipe with the new bend and cutting & making good the walls/floors wherever required.

Providing and fixing brass bibcock of good qaulity :

a) 15 mm nominal bore.

Providing and fixing brass stop cock of good qaulity :

a) 15 mm to 25 mm nominal bore.

Providing and fixing ball valve (brass) of good quality complete (high pressure) with plastic float and brass rod whereverrequired :

a) 15 mm to 25 mm nominal bore.

Providing and fixing high pressure plastic floats with brass rods for :

a) 15 mm to 25 mm nominal bore ball valve.

Providing and fixing CP brass shower rose 100 mm dia. of good qaulity with 15/20 mm inlet size.

Providing and fixing chromium plated brass pillar tap of good quality :

a) 15 mm nominal bore.

Providing and laying GI pipes (Medium class) of good quality complete with GI fittings & clamps including cutting, trenching and refilling, disposal of surplus earth to the good dumping area or cutting and making good the walls wherever required in external & internal work. (All pipes shall conform to the relevant IS specifications) :

a) 15 mm to 25 mm nominal bore.

Laying of GI pipes (Medium class) given free from NFL including excavation of trenches, laying of pipes upto 60 cm. depth, refilling of trenches and disposal of surplus excavated materials within NFL premises or cutting and making good the walls wherever required as per directions of Engineer-in-Charge ( for internal/external work) :

a) 15 mm to 25 mm dia.

Providing and fixing GI fittings :

(I) Bends 90 deg. (elbows & tees) :

a) 15 mm to 25 mm dia.

(II) Nipples or reducers :

a) 15 mm to 25 mm dia.

(III) Sockets or Unions :

a) 15 mm to 25 mm dia.

(IV) Plugs :

a) 15 mm to 25 mm dia.

Providing and fixing brass full way valve with wheel of good quality :

a) 15 mm to 25 mm dia.

Removing chockage of floor trap inkitchen/bathroom, removal of chockage of CI fittings/waste water pipe/gully trap upto receiver manhole chamber complete in all respects as directed by Engineer-in-Charge including disposal of rubbish to dumping area.

Removing chockage of water closet including removing of chokage from CI fittings/soil pipe upto receiver sewer manhole chamber complete in all respects including disposal of the rubbish to dumping area as directed by Engineer-in-Charge.

Removing chokage of sewer pipes between building manhole to service sewer manhole or service sewer manhole to next trunk sewer manhole or trunk sewer manhole to adjacent trunk sewer manhole or one manhole to another manhole in the sewer line including cleaning of manholes and disposal of rubbish to the dumping area as per directions of Engineer-in-Charge. (Sewer rods shall be supplied free by NFL).

Removing chockage of wash basin including removing chockage of water pipes, P or S trap and receiver floor trap complete in all respects including disposal of rubbish to the dumping areas as per directions of Engineer-in-Charge.

Carrying out requisite adjustments/rectifications of various accessories in WC cistern complete to ensure smooth functioning of the cistern.

Repairing bib cock/stop cock/ball valve/pillarcock, full way valve including replacement ofwasher/brass spindles wherever required complete as per directions of Engineer-in-Charge.

Cleaning of silt, algae & other foreign materials from overhead tank and disposal of the same as per directions of Engineer-in-Charge.

Providing and fixing CP brass bib cock long body with minimum length of 162 mm of good quality :

a) 15 mm dia. with long handle.

Providing & fixing PVC flexible waste pipe of good quality for Sink/Wash basin including PVC waste fittings complete (Drain pipe):

a) 32 mm dia.

b) 40 mm dia.

Providing & Fixing CP brass angle valve of good quality for wash basin/geyser points :

a) 15 mm nominal bore

Providing & fixing Jet spray with angle cock,flexible pipe for European WC complete including removal and refixing of taps,G.I.fittings etc..

Providing and fixing of Stainless steel kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls whever required :

Kitchen Sink without drain board -610 mmX460 mm, bowl depth 200 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confirming to IS 13592, Type A including jointing with seal ring leaving 10 mm gap for thermal expansion, Single socketed pipes

i) 75 mm diameter.

ii) 110 mm diameter.

Providing and fixing on wall face unplasticised Rigid PVC moulded fittings/ accessories for unplasticised pipes confirming to IS 13592,Type A including jointing with seal ring leaving 10 mm gap for thermal expansion,

A. Single pushfit coupler :-

(i) 75 mm diameter

(ii) 110 mm diameter

B. Bend

(i) 75 mm diameter

(ii) 110 mm diameter

Demolishing cement concrete in pavements, floors,plinth protections and sub bases in fence posts,pedestals including disposal of all materials to the approved dumping area as directed by Engineer-in-Charge.

Dismantling of old plaster or skirting, raking out joints and cleaning the surfaces for fresh plaster work including disposal of rubbish to dumping ground in NFL premises as directed by Engineer-in-Charge.

Dismantling pipes of all sizes including excavation/taking out of clamps wherever required, making good the same and refilling trenches after taking out the pipe, breaking of joints including stacking of pipes as per directions of EIC :

a) GI Pipes

Fixing/repairing/straightening chainlink fencing to existing MS angle posts with GI wire, J-hooks, rods etc.,including welding wherever required as per directions of Engineer-in-Charge. (Chainlink Fence required will be issued free of cost by NFL at its stores).

Engaging tractor trolley with all tools, tackles and requisite manpower ,diesel & lubricants for disposal of rubbish or any other work as required and as per directions of Engineer-in-Charge.

Providing miscellaneous services of manpower with requisite skill including supply of required toolsand tackles for various unmeasurable and unforeseen jobs as per site Note:-In case the quoted rates for the below 02(two) items i.e. 89.1,89.2are found less than that of below mentioned rates, party’s bid shall be rejected. requirements :

a) Mason/Carpenter/Plumber (Minimum rate to be quoted by bidder is Rs. 735 else bid will be rejected)

b) Un-skilled Labour/Helper (Minimum rate to be quoted by bidder is Rs. 629 else bid will be rejected)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : a) On Old work ( One or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade on : a) On Old work ( One or more coats)

Removing dry or oil bound distemper by scraping, sand papering and preparing the surface smooth.

RAKESH STRUCTURE AND ENGINEERS (BID ID -859853)