CONSTR OF VOCATIONAL LABS UNDER PM SHRI AT KV AT MIL STN SRI GANGANAGAR

Amount

Surface dressing n. exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches n. exc 1.5m in depth and 1.5m in width and getting out in hard/dense soil complete all as specified and directed.

All as per Ser item No 2.00 above but exc1.50m in depth but n.exc 3.0m complete all as specified and directed.

M&L for 'Anti termite treatment (Pre treatment) Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for 'Anti termite treatment (Pre treatment) Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for 'Anti termite treatment (Pre treatment) Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for providing cement concrete 1:4:8, type D2, (Using 40mm graded stone aggregate) as in foundation, mass concrete and filiings complete all as specified and directed.

M&L for providing reinforcement cement concrete, M-25 (using 20mm graded stone aggregate) as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc.

M&L for providing reinforcement cement concrete, M-25 (using 20mm graded stone aggregate) as in columns complete all as specified and directed.

M&L for providing reinforcement cement concrete, M-25 (using 20mm graded stone aggregate) as in beams, cantilevers, bressumers, lintel over 1.5m span all as specified.

M&L for providing reinforcement cement concrete in M-25 (using 20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified.

M&L for providing reinforcement cement concrete, M-25 (using 20mm graded stone aggregate) as in Chajja all as specified.

S&F mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

S&F mild steel TMT bars 6 to 8 mm dia , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

S&F mild steel TMT bars 6 to 10mm dia all as in stirrups, spacers and binders complete all as specified and directed.

M&L for form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M&L for form work to sides of columns complete all as specified and directed.

M&L for form work to side and soffits of floor beams. Lintel beam, roof beam , landing, waist slabs, chajja railing and similar work complete all as specified and directed.

M&L for form work flat rough finished surfaces of concrete to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works not exc 200mm thick (Horizontal or slopping) complete all as specified and directed.

M&L for form work flat rough finished surfaces of concrete to Chullah hood Chajja, troughs and similar items including edges complete all as specified and directed.

M&L for form work rough finished surfaces of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls and similar works exc 10cm but n. exc 20cm wide.

M&L 15mm plaster in CM 1:3 while the concrete is green with approved water proofing compound in proportion as recommended by the manufacturer complete all as spd and directed. Note : Water proofing compound measured and paid saperately.

Supply only integral water proofing compound.

M&L for providing Fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed by Engr in Charge..

M&L for providing size bricksBrick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed by Engr in Charge.

M&L for polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 Kg Per Sqm to horizontal or vertical surfaces complete all as specified and directed.

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection complete all as specified and directed.

Removing excavated material n exc. 50m and deposited where directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:4 on other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and direceted by Engr in Charge.

M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work finished even and smooth without using extra cement complete all as specified and direceted by Engr in Charge.

M&L for rendering 5mm thick in cement mortar 1:3 on ceiling finished even and smooth with using water proofing compund as per manufacturer instruction.

M&L for providing cement concrete 1:4:8, type D2, (Using 40mm graded stone aggregate), 100mm thick as in sub base in floor/paving etc complete all as spd and directed.

M&L for providing cement concrete 1:2:4, type B1, (Using 20mm graded stone aggregate), 25mm thick as in sub base in floor/paving etc complete all as spd and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm with putty finish over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer and 3mm thick wall care putty finish complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed.

M&L preparation of new surface and apply three coats of white wash on the ceiling complete all as specified and directed.

M&L 15mm screed bed or bedding layer of cement mortor 1:6 for laying floor finishes complete all as specified and directed.

M&L non skid ceramic coloured tiles 7- 8mm thick, area of the tile exc. 0.11 Sqm but n.exc 0.18 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifieed and directed.

M&L Machine cut kota stone slab flooring 20-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. Note : 100mm wide white makhrana marble strip of 16-20mm thick to be laid in design directed by Engineer-in-Charge. Rates for the same included in quoted rate.

M&L coloured Glazed ceramic tiles in vertical surface 600x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match set in jointed in neat cement sluury and pointed to match including rendering 10mm thick in CM 1:3 as a backing coat.

M&L 75 mm thick cement concrete type C-2, 1:3:6, (40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed. Note : PCC laid in panels n.exc 300 mtr length and joints to be filled with bitumen mastic. Rates for the same included in quoted rates.

M&L for 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

S&F factory made flush shutters 30mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including 0.90mm thick decorative laminated type 1 of surface finish, color and pattern as approved, fixed with approved adhensive as per manufacturer's instructions complete all as specified and directed.

M&L 30mm thick 2nd class hardwood glazed and skelton factory made open rebated and prepared to recive glass gauge etc.(without sash bars) edge of framing plain chamfered or rounded fitted with cut and mittered beads for securing glass gauge etc. size of members of shutters as specified in SSR Part-I 2009.Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F steel windows/ ventilators n.exc less than 1.20mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebated comprises of glazed and skelton shutter ERW section 50mm x 20mm and 1mm thick and two open able leaf consisting two Nos sash bar of 'T' section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box 'T' section of size 60mm x 25mm and 1.25mm thic. Each window included following fittings welded to failed shutter :- (a) Holdfasts 150mm long 12mm x 3mm made to shape - 04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long - 1 No of leaf. (c) MS tower bolt 150mm long 02 Nos per leaf. (d) 'Z' section 20mm x 25mm, 100mm long stopper- 01 No per Leaf. (e) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 Nos per leaf. (f) MS paintal hinges of size 75mm x 12mm - 02 Nos per leaf. (g) Fabrication and fixing arrangment complete.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specified and directed.

S&F stainless steel 202 grade finished sliding door bolt/ aldrop 16mm x 300mm with square knuckle, plate type with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F stainless steel 202 grade finished 200mm long tower bolts in square shaped with minimum 10mm dia rod complete all as specified and directed.

S&F stainless steel 202 grade medium weight butt hinges 100mm long complete all as specified and directed.

S&F stainless steel 202 grade finished curved handles 200mm long complete all as specified and directed.

S&F tubular towel rail 20mm dia, decorative type 60cm long between flanges, brass cromium plated complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring 140mm size complete all as specified and directed.

M&L for preparation of new wood surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.

M&L for providing two coats of painting with synthetic enamel paint over a coats of red oxide primer on new steel surface after preparation complete all as specified and directed.

Supply and fix sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,flat edge (matt finish) bowl size 600mm x 450mmx220mm including waste coupling and waste pipe complete all as specified and directed.

M & L granite (telephone black) work 16 to 20 mm thick (table rubbed and polished) in cooking platforms/counters/vanities etc and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and direceted.

S&F 15mm bib taps/ angle cock/ pillar taps cast copper alloy, chromium plated fancy type, quarter turn type handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

S&F stop cock, cast copper alloy, fancy type chromium plated, 15 mm dia of bore complete all as specified and directed.

S&F stop cock, cast copper alloy, 20mm dia complete all as specified and directed.

S&F S&F Rotational molded HDPE, three layered, white colored, Water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 litres capacity, including ball valves 20 mm size, high pressure of PTMT with epoxy coated brass/aluminium rod & high density plastic ball screwed for iron pipe and fixed and 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.

S&F Rotational molded HDPE, three layered, white colored, Water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 litres capacity, including ball valves 20 mm size, high pressure of PTMT with epoxy coated brass/aluminium rod & high-density plastic ball screwed for iron pipe and fixed and 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.

S&F PVC connection 15mm size, 450mm long with PTMP nuts both side complete all as specified and directed.

S&F CP brass grating of size 100mm dia of complete all as specified and directed.

S&F Single lever extended basin mixer cast copper alloy, chromium plated 15mm dia of bore complete all as specified and directed by Engr in Charge.

M&L for 75mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for 100mm cast iron floor/ Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1,(1:2:4) complete all as specified and directed.

S&F 75mm bore dia Cast iron spun coated soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches, in floors, or on walls complete all as specified and directed.

S&F 100mm bore dia Cast iron spun coated soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches, in floors, or on walls complete all as specified and directed.

M&L for Roof treatment to RCC roof as follows :- (a) Preparation of roof top RCC surfaces, providing and applying single component a fiber reinforced elastomeric liquid applied as waterproofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres and having Sun reflective index (SR) of 106 on top of concrete roof surfaces in three coat including self-primer at ratio of elastomeric liquid and water as per manufacturer's instruction and coverage @1 Ltr/10 Sqm with a thickness of 650 micron, Cracks should be filled with cack sealants, the vital physical and chemical parameters shall be as under:- Min Elongation at break of 350%, Results positive hydrostatic pressure of upto 10 bars, crack bridging ability of 2.5mm at 650 microns. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-Charge/Consultant. Note : (a) 06 Hrs interval between two coats will be maintain and the work will be carried out incorporation and will be paid only after receiving of the Waranty Certificate from the Company). (b) The guarantee of treatment shall be for minimum 10 years reckoned from date of completion of whole work

S&F for tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of following sizes complete all as specified and directed :-

25mm dia

20 mm dia

15 mm dia

S&F 5.50mm toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes complete all as specified and directed.

M&L anodised aluminium powder coated any colour frames for doors, windows with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S&F 18mm thick High Density High Moisture Resistant (HDHMR) exterior Grade Board with one side designer laminate (OSL) of approved colour and finishing and other side white balancing with density of 850 Kg/cum complete all as specified and directed.

S&F 300mm width of flange continuous (Piano) hinges, stainless steel, bright finish or electro galvanised complete all as specified and directed.

S&F vitreous china squatting pan Orissa pattern size 580 x 440 mm white with internal foot rest including P trap complete including provision of lime concrete bedding complete all as specified and directed.

S&F PVC valveless, symphonic action type flushing cistern 10 ltr capacity, low level white with inlet ball valve, float and handle including bracket and flush pipe complete all as specified and directed.

S&F CP grating of size 100mm dia of PTMT complete all as specified and directed.

S&F fiber glass reinforced plastic (FRP) Door frames of three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyster resin and chopped mat. door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiberglass from all sides. M S stay shall be provided at the bottom to steady the frame complete all as specified and directed.

S&F 30mm thick fiber glass Fibre reinforced plastic (FRP paneled Door Shutter) of required colour and approved brand and manufacture made with fire-retardant grade unsaturated polyster resin. Moulded to 3mm thick FRP laminate for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels and conforming to IS 14856-2000 including fixing to frames complete all as specified and directed.

S&F stainless steel 202 Grade finished 100mm long tower bolts in square shaped with minimum 10mm dia rod complete all as specified and directed.

S&F D type handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F premium quality Vitreous China urinals, full stall type (back/corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement; fixing flushing system with brackets, flush pipe grating and union for discharge pipe all as specified and directed.

S&F 20mm bore dia stainless steel curtain rod, including SS fancy type decorated brackets, stops, rollers including end knobs etc complete all as specified and directed by Engr-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M&L for providing cement concrete 1:4:8, type D2 (Using 40mm graded stone aggregate), 75mm thick as in sub base in floor/ paving etc complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete as specified and directed.

M&L cement concrete 1:3:6, Type - C1, ( using 20mm graded stone aggragate) as benching in surface channel & drain including form work all as specified and directed

Extra for forming fair finished drain or channel 30 Cm inner girth in cement concrete, using extra cement, including forms moulds mi-tred stopped ends etcs complete all as specified and directed.

S&F DWCPE(SN8) 150mm nominal dia pipes as per IS-16098 (Part-II) laid in trenches on and including 100 mm thick bed comprising of well compacted clean poorly graded garvel/sand mixture with little/ no fines to require slope, Includes all accesories/fittings/jointing ring, jointing and testing complete all as sped and directed by Engr in Charge.

S&F LLDPE septic tank of capacty 2000 Ltrs deigned to carry sewage ang sludge water, including excavation and earthwork in any type of soil installed over and including 100mm th PCC 1:4:8, type D-2 including all necessary fitting foor connectiong to inlet and outlet complete all as specified and directed by Engr in Charge

M&L for 1.2 M dia X 3 M effective depth Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specified and directed by Engr in Charge. (Ref TD No BTD-804).

M&L providing precast cement concrete in RCC (1:2:4), type B-1, with 20 mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces setting in mortar (1:4) complete with joints to match complete all as specified and directed.

M&L Machine cut pre polished kota stone slab 20-22 mm thick over backing coat of CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. Note : Single piece stone to be used in riser and tread of steps and 3 Nos of grooves to be provided on treads, price for the same included in quoted rates.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and thickness for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.

All as per Ser item No 100.00 above but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.

All as per Ser item No 100.00 above but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.

All as per Ser item No 100.00 above but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.

S & F modular switch 5/6 Amps single pole one way module including modular cover plate with frame and metal flush box complete all as specified and directed by Engineer - in - Charge.

S & F modular switch 1 way 16 A, 1 module complete all as specified and directed by Engineer - in - Charge.

S & F modular socket 6/16 Amps, 2/3 pin combined 2 module complete all as specified and directed by Engineer - in - Charge.

S & F modular Socket 6 Amps, 2/3 pin combined 2 module complete all as specified and directed by Engineer - in - Charge.

S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.

S & F light fitting with LED batten 20W LED batten with 'Eye Soft' technology & glarefree diffuser for perfect application in modern homes or aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.

S & F modular stepped type, fan regulator not less than 120 watt for ceiling fan 1400mm sweep complete all as specified and directed by Engineer - in - Charge.

Supply and fixing BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with 2 year warranty.

S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F MCB ‘C’ series type suitable for 240 volts,10 KA, AC supply SPN 63 Amps , with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S & F MCB ‘C’ series type suitable for 240 volts, AC supply 6 to 32 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4), type B1, using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4), reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm Flat Iron with fixing arrangement, funnel, wire mesh and earth work inhard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge

Supply, layuing, jointing and testing and commissioning in replacement of 16 Sqmm x2 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer in charge.

Supply and lay GI pipe 40 mm light grade for cable protection in walls trenches or any situation including clamp nut bolt etc complete all as specified and directed by Engineer-in-Charge.

Supply and filling Sand for Cable protection complete all as specified and directed.

Supply and lay standard size bricks subclass B type complete all as specifed and directed

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direted.

S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direted.

M & L for cutting existing GI water tubing of size 25/ 40/ 50mm bore for alternation or addition including screwing/ threading and jointing with suitable size GI socket complete all as specified and direted.

M/s HANS BROTHERS (BID ID -3173793)

SHIVA CONSTRUCTION COMPANY (BID ID -3173960)

J and P CONTRACTOR (BID ID -3173550)

SHRI SHYAM CONSTRUCTION CO. (BID ID -3173392)

HARSH CONSTRUCTION CO. (BID ID -3173424)

AYUSH BUILDERS (BID ID -3173650)