Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.1 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹14.7 L+₹1.6 L (12.3%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder |
Tender Value
₹15.1 L
EMD Value
₹30,200
Closing Date
28 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Dronachal
GE Dronachal, Dronachal Top, Neori Hills, Bhopal 462038
PROVN OF BOND ROOM ALONG WITH WASHROOM CUM TOILET AND URINAL AT DRONACHAL TOP BHOPAL
2022_MES_555330_1
8719/E8
Open Tender
Civil Works
Item Rate
180 days
Bhopal
Class-E, Category a (i) and as per NIT documents
6 documents required · 6 mandatory
₹500
Garrison Engineer Dronachal
₹30,200
Yes
2 Dec 2022
30 Sept 2022
1 Nov 2022
30 Sept 2022
28 Oct 2022
15 Oct 2022
1 Oct 2022 - 14 Oct 2022
Amount
Surface excavation not exceeding 30 Cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and directed
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard rock complete all as specified and directed
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of pipe etc including getting out Hard/dense soil complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft and loose soil in trenches complete all as specified by Eng-in-Charge.
Filling ,spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft and loose soil in floors in soft and loose soil complete all as specified by Eng-in-Charge.
Hardcore of guage exc 63mm but n exc. 100 mm broken stone or boulders , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified by Eng-in-Charge.
Removing excavated soil not exc 50m deposited where directed at a level not exceeding 1.5m above the starting point complete all as specified by Eng-in-Charge.
M & L for cement concrete in foundations, filling and mass concrete type D-2 1:4:8 using 40mm graded stone aggregate complete all as specified and directed
M & L for use and waste type of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat & rough finished surface of concrete complete all as specified and directed
Ditto as per sr item No10.00 above but in sides of pillars, posts, struts, piers, columns and stanchions for square/ rectangular shape & rough finished surface of concrete complete all as specified and directed
M & L for use and waste type of formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for flat & rough finished surface of concrete complete all as specified by Eng-in-Charge.
Ditto as per sr item No 12 above but in soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified by Eng-in-Charge.
Ditto as per sr item No 12 above but in chhajja and similar works complete all as specified and directed
Ditto as per sr item No 12 above but in edges of roof slab floor pcc, window cill etc. and similar works not exc 20CM wide complete all as specified and directed
M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends stirrups and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
Ditto as per item No 16 above 6mm to 8mm dia , complete all as specified and directed
M & L for M-25 design mix concrete using 20mm graded stone aggregate in foundations,incl. footings, foundation beams; plinth beams; bases for columns, etc.complete all as specified by Eng-in-Charge.
Ditto as per item No18 above but in roof Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified by Eng-in-Charge.
Ditto as per item No 18 above but in Columns, pillars, piers, posts and struts complete all as specified by Eng-in-Charge.
Ditto as per item No 18 above but in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
Ditto as per item No 18 above but in chhajja complete all as specified and directed
M & L for pre-construction anti-termite treatment using chloropyriophos emulsifiable concentrates confirming to IS 8944 (2005) to the backfill in contact with foundation at the rate of 7.5 litres ofemulsion per square metre of vertical surface ( Area of the sub structure in contact with backfill to be measured) Note:- Application of ATT to be done by certified applicator of IPCA
M & L for pre-construction anti-termite treatment using chloropyriophos emulsifiable concentrates confirming to IS 8944 (2005) to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface. Note:- Application of ATT to be done by certified applicator of IPCA
M & L for pre-construction anti-termite treatment using chloropyriophos emulsifiable concentrates confirming to IS 8944 (2005) to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area Note:- Application of ATT to be done by certified applicator of IPCA
M & L for pre-constructionantion termite treatment using chloropyriophos emulsifiable concentrates confirming to IS 8944 (2005) to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall Note:- Application of ATT to be done by certified applicator of IPCA
M & L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed
Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in in cement mortar 1:4 complete all as specified and directed
M & L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:6 cement mortar and finished even and smooth without using extra cement complete all as specified and directed
M&L rendering 10 mm thick on fair faces of brick work or on concrete surfaces in CM 1:6 and 5mm thick in CM 1:4 mixed with WPC surface finished even and smooth without using extra cement on external surfaces complete all as specified and directed. Note :- Water proofing compound will be measured and paid saperately
Supply only integral water proofing compound complete all as specified and directed
M & L for rendering 5mm thick in cement mortar 1:4 in concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed
M & L for 100mm thick cement concrete in foundations, filling and mass concrete type D-2 1:4:8 using 40mm graded stone aggregate complete all as specified and directed
M & L for 25mm thick cement concrete in foundations, filling and mass concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified and directed
M & L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finish in 1:6 cement mortar complete all as specified and directed
M & L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finish in 1:4 cement mortar complete all as specified and directed
M & L for rendering 10mm thick backing coat to glazed tile/ kota stone in skirting and dedoes for rough finished surface complete all as specified and directed
M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing to give high gloss finish complete complete all as specified and directed
M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing to give high gloss finish complete all as specified and directed
M & L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed
M & L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces such as skirtings, dados and risers to steps etc.
Supply and fixing Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed
Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and lengthcomplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Supply and fixing 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.
Supply and fixing 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and directed
Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and provision and fixing with and including stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge.
Supply and fixing aluminium handles extruded type of size 125mm, complete all as specified and directed.
Supply and fixing 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed
Supply and fixing 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cost or extruded sections or cost alumminium alloy complete all as specified and directed
Supply and fixing 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed
S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
Supply & fixing steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
All as per item No 53 above but without glazing bars complete all as specified and directed
Steel ventilator with top hung shutter including hinges, steel peg stay, with or without glazing bar complete all as specified and directed
Supply and fixing galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed
Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane as including in repair complete all as specified and directed.
Material and labour for painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed
Material and labour for painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with red oxide primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed
S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed
Supply and fixing light coloured vitreous china wash hand basin white available shape as approved of 550mmx400mm (minimun) on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified .
Supply and fixing vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe n including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed
Supply and fixing PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10ltrs capacity complete all as specified and directed
Supply only flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern
Supply and fixing of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type.
Supply and fixing of fancy type chromium plated Bib tap, 15mm bore any make as given in list of makes as directed by the GE.
Supply and fixing of CP brass fancy type stop cock with long shank & as concealed type/ angular type .
Supply and fixing PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed
Supply and fixing Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.
Supply and fixing Soap dish, vitreous China white, ap?proximate size 160x 160x90mm
Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
S & F 20mm dia tublar towel rail including a pair of bracket with matching specification and size
Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified
Supplying and laying of 20mm bore CPVC pipes SDR 11 & CPVC SDR 11 brass fittings on walls/ceiling or laying in floors complete all as specified
S & F 500 Ltrs capacity Rotational moulded polye?thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S & F 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
S & F 100mm Cast iron floor trap, with SS grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
Supply & fixing PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface .
Supply & fixing PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls including clamps of the following bore
Supply & fixing PVC (SWR) junction single (single `T') equal or unequal with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface .
Supply & fixing PVC (SWR) pipe bend with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface .
M & L for screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:3 mixed with water proofing compound for laying for laying roof treatment laid when the concrete is green. Note water proofing compound will be measured and paid saperately
M & L for preparing the surface and priming surfaces with and including applying normal treatment (for moderate conditions) using oil based bitumen primer to preapre surface for APP roof treatment
M & L for bitumen grade 85/25, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat
M & L for applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.
M & L for provisioning and applying two coats of aluminium paint over newly laid APP membrane surface of non accessible roof complete all as specified and directed
M & L for applying 1mm thick (average) putty for smooth finish on prepared surface complete all as specified and as directed
M & L of applying two coats of oil bound distamper over puttied surface as above complete all as specified and directed
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 01mm thick putty complete all as specified and directed.
Preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete.
M & L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement laid in panels
Material & labour concrete bed of PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150mm drain pipes bedding & hunching against the sides complete after pipes are laid, jointed and tested complete as specified. Note:-Thickness of bed below the barrel of pipes shall be10cm.
Supply & fixing 150mm salt glazed stoneware pipe grade 'A' laid in trenches and jointed in CM 1:1 including testing all as specified & directed.
Material & labour PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching ,kersbs compelet all as specified and directed
Material & labour for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping for manhole including slightly rounded or chamfered angles and including necessary form work finishing exposed surface.
Extra for forming fair finished drain or channel 30cm inner girth in cement concret, using extra cement, including forms, moulds, initred/stopped ends.
Material & labour for plastering 15 mm thick on brick walls masonary as fair face of cement mortar 1:6 surface finished fair and even complete all as specified.
Cutting into existing manholes for connecting new sewage line / diverting some line to new manhole for smooth flow ; 225mm bore (internal dia of pipe ) incl making good to disturbed benching and haunching, plaster etc and forming new branch channel ( ½ round of ¾ section) if required in cement concrete 1:2:4 type B1 and smooth finished , reforming benching as required and as directed for internal dia for the following pipe. (Each Man hole shall be measured under this item )
Material and labour for providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate)as in cover slabs (for manholes, drains etc.) of any size and thickness as required Set in cement mortar 1:4 Note :- Reinforcement will be measured and paid saperately
Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-
One light point controlled by one switch.
One ceiling Fan point controlled by one switch.
One exhaust Fan point controlled by one switch.
One 3 pin socket outlet 5 Amps on independent board.
One 3 pin socket outlet on same board.
Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 4 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/ pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 4 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complee all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent.
Supply and fix of modular switch single pole one way 6 Amps, ISI marked complete all as specified and directed by Engr-in-charge.
Supply and fix of modular switch single pole one way 16 Amps, ISI marked complete all as specified and directed by Engr-in-charge.
Supply and fix of modular Socket single pole one way 6 Amps, 2 module ISI marked complete all as specified and directed by Engr-in-charge.
Supply and fix of modular socket single pole one way 16 Amps, 2 module ISI marked complete all as specified and directed by Engr-in-charge.
Supply and fix of modular ceiling fan regulator single pole one way 16 Amps, ISI marked complete all as specified and directed by Engr-in-charge.
S & F sheet metal enclosure for MCB DB, SPN 230 Volts 200 amps rated busbar 8 way double door complete all as specified and directed by Engr-in-charge.
Supply and fixing of MCB single pole with neutral 240 volts 40 Amps with thimble suitable for existing wires incl connecting, testing and commisioning complete all as specified and directed by Engr-in-charge.
Supply and fix MCB SP, 240 Volt, 6 to 32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed.
S&F Exhaust Fan 300 mm sweep with louver complete metal body complete all as specified and directed by Engr-in-Charge.
Cutting holes suitable for fixing 300 mm sweep Exhaust fans through brickwalls built in cement mortar and making good around the holes in cement mortar 1:3 complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and directed by Engr-in-charge.
S&F LED Building security light fitting 1x 35 W new generation energy saving and environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seprate driver compartment with IP65 protection and impact resistance of IK07 for mounting existing bracket complete including all accessories pre-wired with 3 X 1.5 sqmm single core mutistrand copper conductor cable up to celing rose/ terminal box, all as specified.
Supply and Fix LED Mirrror light 10 W wall mounted, Bronze finished, flexible neck for adjusting beam, warm white 3000 K with good colour rendering (CRI>80) complete all as specified and directed
Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground any soil (hard/ soft) (earth pit not less level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 5 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1 , water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel all as specified and directed by EIC. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.
S&F Geyser (Water Heater) of 25 lts, 2 KW capacity with Glass container working with single phase 230 volt including connecting assessories complete all as directed by Engr-in-charge.
S & F insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core
S & F 1 x 18 watt LED tube light fitting basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver, LED Decorative luminaire with suitable for lamps LED Light high efficiency LED driver,Optimized heat dissipation for ensuring high LED life span.
Supply and lay for tubes 'medium grade ' with all galvanised fittings laid in trenches/on ground complete of dia 50 mm including taking down unserviceable pipe .
Supply and lay for tubes 'medium grade ' with all galvanised fittings laid in trenches/on ground complete of dia 25 mm.(For Rising ) including taking down unserviceable pipe .
Supply and lay for tubes 'medium grade ' with all galvanised fittings laid in trenches/on ground complete of dia 15 mm.(For fresh water) including taking down unserviceable pipe .
Supply and fix gun-metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed for pipe dia 50 mm .
Supply and fix gun-metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed for pipe dia 25 mm.
Cutting existing steel tubing for alteration and addition 25 to 32 mm GI tubing.
MODI CORPORATION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .