PROVN OF GUN SHED WALL LINING AT 2IC QM ADJT OFFICE OPS ROOM FOR 75MED REGT AND EXHAUST FAN FOR VARIOUS REPAIR GROUP OF 510 ABW UNDER AGE BR I AGE E M I OF GE NORTH MEERUT

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out for every 3 cm above/below 15 cm average clepth complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

Removing excavated material ( spoil ) not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L laying for hardcore of broken brick of burnt clay bricks (well graded) bricks of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-20 (using 20 mm graded crushed stone aggregates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-20 (using 20 mm graded crushed stone aggregates)as in columns, pillars, piers, posts and struts complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5mm PVC fillet as per specifications and drawing shown on page No 180 of SSR Part-II and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 13 here-in-before but 6mm to 8mm dia

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in floor/plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for 100mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L preparation of new plaster surface of wall by applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement with using water proofing compound @ 3% complete all as specified and directed. Note:- water proofing compound will be measured and paid seperately.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M & L for applying 15mm thick rendering unsing ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @3% by weight of cement of as per manufacturer instructions, complete all as specified an directed. Note:-Water proofing compound shall be measured and paid sepratly Note Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of acceptance of contract.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Supply & fix exhaust fans AC single phase-230 volts size 450 mm sweep, metalic body, heavy duty with louver shutter complete all as specified and directed . Make : Bajaj/ Orient / Compton

M&L making hole for fixing exhaust fan on existing wall at any height including finish the distrubed surfaces complete all as specified and directed

M&L for concealed point wiring with 1.5 Sqmm (nominal cross action area) single core, multi stranded PVC insulated, unsheathed copper conductor, FR cable in and including in rigid PVC conduit 20mm dia or higher medium grade ISI marked complete all conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal swith boxes with 3mm thick plastic laminated hard glossy surface sheet top cover, including searth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws,cup washers complete all as specified and directed

S&F switch piano flush type 5 A ac. 240 V one way ISImarked complete all as specified and directed

mohanlal gupta

SA construction co.

Manglam Engineers and Construction Co

Harsha Consultant and Builders

High Tech Metal India