Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.2 LAccepted-AOC 41 A COLONELGANJ CANTT FATEHGARH DISTT FARRUKHABAD UP 209601 | FATEHGARH | FARRUKHABAD | UP | 209601 | 1 | Accepted-AOC BEING LOWEST | |
| 2 | 2₹14.6 L+₹24,587 (1.71%)Rejected-Finance | 2 | Rejected-Finance Being not lowest | |
| 3 | 3₹15.5 L+₹1.2 L (8.04%)Rejected-Finance | 3 | Rejected-Finance Being not lowest |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
30 May 2020, 6:00 pmClosed
GE FATEHGARH
GE MES FATEHGARH
MAINT OF SEWAGE SYSTEM INCLUDING CLEANING OF SEPTIC TANK AND REPAIR / REPLACEMEENT OF SEWAGE LINE, MANHOLES AND RELEVANT WORKS IN JCOS / OR ACCN AND OTM ACCN UNDER AGE B/R-II AT FATEHGARH CANTT
2020_MES_342319_1
GE/FAT/ET-06 OF 2020-2021
Open Tender
Miscellaneous Works
Item Rate
365 days
GE MES FATEHGARH
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE FATEHGARH
₹30,000
Yes
9 Jul 2020
2 May 2020
1 Jun 2020
2 May 2020
30 May 2020
13 May 2020
2 May 2020 - 12 May 2020
Amount
M&L for clearing blockage of WC (E Type & I Type) by opening inspection door bend and using Roding / pressure technique to clear blockage. Complete all as specified and directed.
M& L for clearing blockage of Gully/floor traps to first man hole by Roding/pressure to clear blockage. Complete all as specified and directed.
M&L for clearing blockage of floor trap ,sewage line upto and including first man hole by Roding/pressure to clear blockage. Complete all as specified and directed. (Note for item No 01 to 03:- a) Conractor/Rep of the contractor has to collect the complaints on daily basis from incharge of complaint cell. b) The blockage of WC/Floor Trap/Gully Trap are to be cleared on the same day of the recipt of complaint. c) In case of non attaedence of complaints of WC blockage /Gully/floor traps by the contractor on the same day, a paelnty of Rs 200/- per complaint per day will be recovered from the contractor.
M&L for pumping out liquid or semi liquid sludge /solid waste from sewage wells or septic tanks of any size or any depth mechanically or manually and a open trench be made for disposal/ evaporation of liquid after use whole area be covered with bleaching powder and covered with soil complete all as directed by Engr-in-Charge Note: During the cleaning of sewage wells alertnate arrangement be made by contractor by temporary pumping arrangement for clearing sewage disposal complete all as specifed and directed by engr in charge. Complete all as specified and directed.
M&L for cleaning sewage lines dia 150mm / 200mm /300mm as in sewage system irrespective of there depth by Roding and other mechanical methods and removing taken out sludge out side MD land (Length of line shall be measured from manhole to manhole) all as directed by engg-in-charge (Note :- Contractor has take all the safety precautions for the employees deployed for sewage cleaning work line. Complete all as specified and directed.
Cleaning of septic tanks / manholes of any depth and of any size/description by taking out semi solid/solid, silt and any other waste including removing the waste to a distance exceeding 50 metre but out side of MD land and burried in the pit excavated upto 15 cm depth below the GL and cover with excavated soils after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases and refixing man hole cover slab complete all as specified and directed. Note: (i) The cost of excavation of pit ,bleaching powder and RFR to cover the sludge shall deemed to be inclusive in rate quoted by the contractor. (ii) The sludge / solid / semi solid contents shall be collected by the contractor in a closed sewage disposal tanker and transported to out side the ministry of defence land and disposed off in the locations as per contonment board / municipal by lodge in area. All the the tools and plants including mechanical pump, closed lorry and other allied arrangements for making septic tank clean and functional will be made available by the contractor with out any extra cost to the Govt. (iii) The mode of measurement shall be considered 20% of the actual volume of septick tank / manholes (contains human excreta and water).
M&L for breaking up/puncturing exiting badly blocked line and clearing blockage by puncturing the line, excavation and earth work to line upto suitable depth and size all as directed by engg-in-charge Complete all as specified and directed. [ Note :- The items involved in cleaning the blockage i.e excavating and earth work, brick work, plastering , sewage pipe , PCC items etc will be paid for separately under appropriate item of this schedule ].
M & L for construction of Soakage well / pit of size 2.40 m dia and 3.0m deep (Effective depth) with and including all necessary excavation and earth work in any type of soil , PCC and RCC work , masonary and all other works complete all as specified and shown on drg No CELZ/TD Drg No 576 sheet 1 & 2
Demolition and breaking up 150mm bore drain pipes (salt glazed ware ) in cement mortar and taking out from trenches all as specified and directed by Engineer - in – Charge. Complete all as specified and directed.
Demolition and breaking up 200mm bore drain pipes (salt glazed ware ) in cement mortar and taking out from trenches all as specified and directed by Engineer - in – Charge.
Demolition of brick work built in cement mortar incl quoins and arches all as specified and directed by Engineer – in - Charge.
M&L for PCC (1:4:8) type C2 using 40mm graded stone aggregate crushed stone aggregate as in bed SGSW pipe 150 mm bore and haunching against the sides of pipes after laying and testing complete. Complete all as specified and directed.
–Ditto- all as above but for 200mm bore SGSW pipe –ditto- complete all as specified.
M&L for 150mm bore internal dia salt glazed stone ware pipe grade ‘A’ conforming to IS laid in trenches, on concrete bed to required slope, jointed and tested complete all as specified.
–Ditto- above but 200mm bore pipe complete all as specified.
Cutting into existing manholes for connecting new drains, of any dia making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4 ) type B1 using 20mm graded crushed stone aggregate finished smooth and reforming benching as required for 150 mm dia SGSW pipe complete.
–Ditto- all as above here-in-before but for 200 mm bore -ditto- complete.
Excavation in trenches in soft /loose soil n.exc 1.50 m deep and 1.50m wide or shafts, manhole etc n.exc 10 Sqm on plan and n.exc 1.50m deep and getting out including forming bottom surfaces to required slop and gradient complete all as specified.
Returning, filling in trenches, including spreading, leveling watering and wall ramming in layers each n.exc 25cm in soft/loose soil complete all as specified.
Removal of surplus spoil to a distance n.exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified.
M&L for cement concrete (1 : 5 :10) type E-2 using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified.
M&L for brick work built in cement mortar (1:4) using sub class ‘B’ bricks (old size) straight or curved in plan, exc 6.00 m mean radius complete all as specified.
M & L for rendering 15 mm thick to manhole brickwork in CM (1:4 ) finished even and smooth without using extra cement complete all as specified and directed.
M &L 15 mm th screed bed/rendering to sides and bottom of sunken portion in cement mortar 1:4 using WPC @ 3% by weight of cement complete all as specified and directed .
Supply only WPC complete all as specified and directed.
Demolition of cement concrete (un-reinforced) as in sunken portions upto any depth in floors, as specified and directed by Engineer - in - Charge .
M&L cement concrete 1:2:4 type B-1 as in levelling /slopping course as in sub floors finishing the top surfaces fair and even complete all as specified and directed
M&L applying water proofing treatment to roof slabwith APP modified polyeric membrane with centre core 100 micron HMHDPE out film 20 micron each having thickenss 3 mm , weight not less than 3.00 kg/Sqm with 100 mm side overlapand 150 mm end lapand laid with following course of descritiopn below:- (a) Applying evenly a coat of bituminous primer conforming to IS 3384-1965 @ 0.50 ltr/sqm prepared surface till the surface is properly impregnated and solvent oil in primer shall be allowded to evaporate completely. (b) Second caot of bonding material using hot blown grade bitumen 85/25@ 1.2 kg/Sqm conformoing to IS 702-1988 over bituminous primer . (c) third course i:e laying APP Modififed polymeric membrane describe hereinbefore with 100 mm overlap in longitudinal direction and 100 mm in traverse direction , (d) Fourth course of bonding material using hot blown grade bitumen 85/25 conforming to IS 702-1988 @ 1.2 Kg/Sqm over membrane. (e) Fifth course is sprinkling a layer of course sand dusting @ 1kg/Sqm as directed.
M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping bands and benching of manholes etc including slightly rounded or chamfered angles including necessary form work complete all as specified and directed.
M&L for extra forming, fair, finished, drain or channel, 30cm inner girth in cement concrete using extra cement complete all as specified and directed.
Demolition of RCC Slab, Drain cover landing chajja and similar suspended work complete all as specified and directed.
M&L for pre-cast reinforced cement concrete as in cover slabs (1:2:4) type B1 using 20mm graded stone aggregate complete after placing in position over septic tanks/ manhole covers complete all as specified and directed .
M&L for MS deformed bars or twisted bars 6 to 8 mm dia cut to length, bent to shape including cranking bending, and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified.
...Ditto .above but 10mm dia and over – ditto- complete.
Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) n exc 15 cm thick all as specified and directed by Engineer - in - Charge .
S&F in repair Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity including supply pipe & fixing with the help of rawl plugs on walls etc complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (padestal pattern) white including fixing bolts, oval access white seat cover with lid, PVC pressure jet with flexible pipe , conection to flush pipe etc complete all as specified and directed.
Supply & fixing in repairs vitreous china squatting pan “Orissa Pattern” of size 580mm x 440mm, white with, integral foot rests front or back inlets including lime concrete bedding complete all as specified and as directed by Engr-in-Charge etc complete all as specified and directed.
Supply & fixing vitreous china squatting pan “Orissa Pattern” of size 580mm x 440mm, white with, integral foot rests front or back inlets including lime concrete bedding complete all as specified and as directed by Engr-in-Charge etc complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (padestal pattern) white including fixing bolts, trap includig conection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipe etc etc complete all as specified and directed.
Dismantiling Floor, hearth or Wall tiling including cement mortar bedding (but not baking), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.
Coloured Joint less ceramic tiles of size 300mm X 300mm X 7mm thick, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed including taking down old screed bed complete all as specified and directed.
M&L Glazed ceramic coloured designer tiles 350x 250x 7 mm thick as in Vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc complete over 15 mm th rendering in CM (1:4) all as specified and directed.
Demolition and breaking up drain pipes 75/100/150 mm dia ( salit glazed ware, AC or rienforced conc ) set in cement Mortar complete all as specified and directed.
S&F PVC (SWR)110 mm bore pipes single socketed, in any length with rubber ring joints,laid in trenches or fixed to walls complete all as specified and directed.
S&F PVC (SWR)150 mm bore pipes single socketed, in any length with rubber ring joints,laid in trenches or fixed to walls complete all as specified and directed..
S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints,laid in trenches or fixed to walls complete all as specified and directed.
S&F 110 mm bore PVC(SWR) bend any radius complete all as specified and directed.
S&F 150 mm bore PVC(SWR) bend any radius complete all as specified and directed.
S&F 75 mm bore PVC(SWR) bend any radius complete all as specified and directed.
Dismantling of 100 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.
M & L for Cast iron soil, waste and vent pipe of bore 100mm sand cast in any length with or without ears with cement joints fixed to wall/laid in trenches complete all as specified and directed.
M&L for Cast iron plain bends (any redius) of size 100mm without inspection eye complete all as specified and directed.
M&L for Cast iron bends (any redius) diminishing pieces or tapes of size 100mm with inspection eye complete all as specified and directed.
S&F 100 Cast Iron bends (any radius) ducks foot rest or heal rest complete all as specified and directed.
M&L for CI branch pieces single (equal or unequal) ordinary or inverted fitted with oval access door of size 100mm. complete all as specified and directed.
Ditto..... but double branch piece of 100 mm complete all as specified and directed.
M&L for Cast iron floor trap with 100 mm dia out let with stainless steel grating including jointing to waste pipe in run lead complete. complete all as specified and directed.
S&F in repair stack clamps made out of 1mm thick MS sheet and made to shape as per requirement and fixed to walls with help of rawl plug for CI, PVC pipe of any dia.
S&F cast iron cowl 50 mm dia complete all as specified and directed.
M/S SRI JAGDAMBE TRADERS
S B ENTERPRISES
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .