Strengthening and Furnishing of FIAC Balipatana, Banamalipur, Dist-Khurdha

Dismantling and removing old tiled flooring including stacking the useful materials for reuse and removing the debris within 50m lead.Per 1 sqm.

Fixing Floor tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge .

Fixing Ceramic Glazed wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge.

Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete as per direction of Engg-in-Charge .

Wall painting two coats with Plastic emulsion paint of approved shade as per direction of Engg-in-Charge .

Cement Concrete (1:2:4) with 12 mm size broken hard granite chips for R.C.C. works including hoisting and laying.

Fixing industrial Vitrified tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge .

Supplying and fixing of roller blinds by fixing powder coated top channel,bottom channel with channel with bottom end cap end cap,control and good quality of 0.60 mm thick fabric of approved design and quality etc. complete.

6mm. thick cement plaster (1:6) to R.C.C. surfaces finished smooth including closed deep chipping and slury treatment, cost , conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .

Wall Priming one coats on new work with wall water bound primer of approved shade as per direction of Engg-in-Charge .

Wall painting two coats on new work with Distemper of approved shade etc. complete as per direction of Engg-in-Charge .

Wall painting two coats on new work with Weather coat paint of approved shade as per direction of Engg-in-Charge .

Red Oxide Priming one coat with Red oxide primer of approved quality etc. complete as per direction of Engg-in-Charge .

Enamel Painting two coats with enamel paint of approved quality etc. complete as per direction of Engg-in-Charge .

Supply of office table

Providing and fixing Factory made UPVC White colour casements/slidingwindow/door made of extruded profiles.profoles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.making arrangement for fixing of hard ware,EPDM gasket,1.2+0.2mm thick galvanised steel profile to be inserted in required profile frame will be fixed to the wall with 8mmx100 mm long fasteners,all complete as per direction of engineer-in-charge(Glazing hardware hinges and fitting,etc to be paid separately)Note:-Each member of Window to be measured separately with clear lenth etc.complete as per direction of Engg

Supplying and fixing of PVC door frame and shutter of approved quality for toilets with all fittings including all cost as per the direction of the Engineer-in-Charge.

Providing fitting and fixing of the false ceiling with aluminium anodised T section No3215 with 2'-0" centre to entre.I section No-1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0"x2'-0" suspended from ceilingusing 12.5 mm gypsum board etc. complete. withallcost asper directionof EIC

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Supply fitting and fixing MS angle to receive Galvanised twisted metal fence/Concertina Fence including enamel painting over one coat of primer etc. complete as per direction of Engg-in-Charge.

Supplying and fixing of 60 mm thick cement concrete interlocking paver block of M-30 grade of approved make ,design colour and size made by Block making machine with proper compaction laid in required pattern etc complete in all respect conforming to IRC SP-63:2018

Anti Termite measures in Building

Material component(chemical)

a) Chemical requirement

b) 1 ltr of chlorpybos(for wood works)

Labour component

a)Highly skilled

b)Skilled

c) Unskilled

add for hire charges of sprayer,driller & cost of cement mortar @12.50 %

PH&Sanitary Fittings

Laying in trenches unplasticised PVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by heat application method including testing as per specification etc. complete.

Fixing of brass screw-down Bib cocks(Taps) polished bright of the following nominal size as per specification etc. complete as per direction of Engg. in charge.

Fixing Wash Basin with hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damages etc. complete as per direction of Engg. in charge.

Fixing of 600mmx450mm Bevelled Edge Mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with chromimum plated brass screw and washers as per specification etc. complete as per direction of Engg. in charge.

Electrical fittings

Supplying and fitting of light

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Installation, Testing and Commisioning of 18 W LED LIte etc. directctly in celling/ wall , including connection with 1.5 sq. mm FR PVC insulated copper conductor and earthing as required as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )