Civil works

Clearing scrub jungle and debris in the Upstream and Downstream side of Anicut including machineries and charges for hiring required tools and labours etc., Complete complying with standard specification as directed by the departmental officers.

Dismantling clearing away and carefully stacking materials useful for reuse for any thickness of walls of Brick / Stone masonry in cement mortar walls under 3m high etc., complete complying with standard specification and as directed by the Departmental officers.

Dismantling clearing away and carefully stacking materials useful for reuse for any thickness of walls of plain cement concrete etc., complete complying with standard specification and as directed by the Departmental officers.

Earthwork excavating and depositing on bank with an initial lead of 10m and initial lift of 2 m in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small sized boulders & hard gravelly soil for foundation etc., complete complying with standard specification and as directed by the departmental officer

Cement concrete 1:3:6 (One cement, Three sand and Six aggregate) using 40mm ISS guage hard granite broken stone jelly for foundation including dewatering, laying conrete in layers of not more than 15cm thick and compacting, finishing the surface curing etc., complete complying with standard specification as directed by the Departmental Officers.

Random rubble masonry in cement mortar 1:4 (One cement and four sand by volume) using old rough stone and bond stones including simultaneous pointing and all incidental charges such as scaffolding, curing, finishing etc., complete complying with standard specification as directed by the Departmental Officers.

Plastering with Cement Mortar 1:4 (One cement and Four sand), 20 mm thick including curing etc., complete complying with standard specification and as directed by the departmental officers.

Fabricating, Supplying and fixing of Top Beam made up of 300x140mm (ISMB 300) duly drilled to suit the Head Set Assembly with required bed bolt made out of 25mm mild steel round rod duly threaded with suitable anchorage arrangements to a height of 0.90m with necessary Fish plate made out of 20mm mild steel plate of size 0.23 x 0.30m 2 Nos to place the beam in position including petty civil works and painting with two coats of Anticorrosive black paint with one coat Red Oxide primer etc., including dismantling old beam conveying, loading and unloading and stacking to section store warranty for 5 years etc., complete complying with standard specification and as directed by the departmental officers.

Add GST @ 18%