PREVENTIVE MAINT INCLUDING REPAIR OF WASHER EXTRACTOR, DRYING TUMBLER, VACUUM FINISHING TABLE, FLAT WORK IRONER AND OTHER RELATED EQUIPMENT INCLUDING REPLACEMENT OF UNSERVICEABLE SPARES FOR BOILERS, RO SPARES AT BASE HOSPITAL UNDER GE (E/M) BHDC-10

Amount

Periodic, Preventive Maintenance of the commercial RO plant, cap-500LPH, Model-INDROMATIC-403, Make-ION Exchange with replacement of minor spare parts including cleaning, servicing, oiling, greasing etc complete with disconnecting electric/ water connection, through OEM man power complete all as specified and as directed. Notes:- (i) All sundries/minor items shall deemed to be included in quoted rates. (ii) Spare parts to be replaced shall be measured and paid as under the respective items of this Schedule (Item Nos 1.01 to 1.07). (iii) All periodic maintenance shall be done through OEM or their Authorised Agents only. A letter from OEM (M/S ION EXCHANGE) stating that work shall be carried out by OEM or their authorised channel partner shall be uploaded while uploading tender Documents. Financial bid shall not be opened of the bidder who have not uploaded the said letter. The final MOU shall be submitted by the lowest bidder before issue of Acceptance letter/WO.

Supply, fixing, testing and commissioning in replacement Micron Cartridge Filter suitable for 500LPH RO plant, Modal- INDROMATIC-403, Make- ION Exchange, for flow rate of 6 Cum/Hour, to achieve particle filtration less than 5 micron, including complete unit comprising of Polypropylene (PP) Housing and spun wound polypropylene cartridge, built in pressure relief valve complete with inlet & outlet branches, removable caps for replacement of cartridge, inlet & outlet pressure gauge (one for the Feed line and for CIP System) complete all as specified and directed.

S&F in replacement special anti scalent dosing system consisting of one HDPE tank of 100 litres capacity with a positive displacement diaphragm dosing pump having variable flow rate of (0-6 LPH), suitable for 500LPH RO plant, Modal- INDROMATIC - 403, Make- ION Exchange, including motor suitable for operation at 240V, single phase, 50 Hertz supply complete with necessary polypropylene piping, valves, strainers & injection fittings for automatic dosing including testing and commissioning complete all as specified and as directed.

Supply, fixing, testing and commissioning in replacement indoor package type Reverse Osmosis Modules R.O. Membranes suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- ION Exchange of capable to give a net treated water output of 500 LPH, Reverse Osmosis membrane shall be made out of spiral wound multilayer cross linked membrane composite suitable to withstand a pressure of 20 Kg/Sqcm, suitable BSPT/NPT connections used for connecting feed and reject ends. The FRP composite modules shall be complete with all interconnection, necessary instrumentation, valve for sampling, drain, reject & permeate complete all as specified and as directed.

Supply, fixing, testing and commissioning in replacement Flow meter (Rota meter) to measure and control the flow of feed/ product stream/reject stream suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- ION Exchange complete all as specified and as directed.

Supply, fixing, testing and commissioning in replacement Bourden type, 150 mm, Pressure gauges made out of SS 316 (glycerine filled), suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- ION Exchange complete all as specified and as directed.

Supply, fixing, testing and commissioning in replacement Pressure switches to control pressure and give high/low pressure trip(Range : 0-450 PSI) suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- ION Exchange complete all as specified and as directed.

Supply, fixing, testing and commissioning in replacement Level switches, to control water level in the output storage tanks & domestic water storage tank, suitable for RO plant 500LPH, Modal- INDROMATIC-403, Make- ION Exchange complete all as specified and as directed.

Supply only descaling chemical SERCON -201 suitable for membrane of 500 LPH RO Plant complete all as per specified and as directed. Make - ION Exchange /Thermax/UV Rich

Supply only descaling chemical SERCON -202 suitable for membrane of 500 LPH RO Plant complete all as specified and as directed. Make - ION Exchange /Thermax/UV Rich

Supply only Liquid Chlorine Suitable for 500LPH RO plant complete all as specified and as directed.

Supply only PH Booster Make - ION Exchange Suitable for 500LPH RO plant complete all as specified and directed.

Supply only anti-scaling chemical Make - Indion 8211 Suitable for 500LPH RO plant complete all as specified and directed.

Periodic, Preventive Maintenance of the Washer Extractor - 120 Kg capacity, (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 with replacement of minor spare parts including cleaning, servicing, oiling, greasing etc complete with disconnecting electric/ steam/water connection through OEM man power complete all as specified and as directed. Notes:- (i) All sundries/minor items shall deemed to be included in quoted rates. (ii) Spare parts to be replaced shall be measured and paid as "Supply only" under the respective items of this Schedule (Item Nos 8.01 to 8.32). (iii) All periodic maintenance shall be done through OEM or their Authorised Agents only. An MOU between OEM (M/s Fabcare) and contractor shall be uploaded while uploading tender Documents. Financial bid shall not be opened of the bidder who have not uploaded the MOU.

Dismantling/Opening Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 ) for repair, Overhauling, and replacement of unserviceable spare parts comprising of dismantling the equipment using adequate labour and T&P for disconnecting steam / water/ Electric connection, Taking out defective spare parts / items and carrying out necessary major overhauling as required, fixing new spare parts, cleaning, servicing, oiling, greasing etc, making all water/steam/Electric connection, leak testing at desired pressure with and including testing, commissioning of each equipment at optimum efficiency as per the standard complete all as specified and as directed. Notes:- (i) All sundries/minor items shall deemed to be included in quoted rates. (ii) Spare parts to be replaced shall be measured and paid as "Supply only" under the respective items of this Schedule (Item Nos 8.01 to 8.32). (iii) All overhauling work shall be done through OEM or their Authorised Agents only. An MOU between OEM (M/S Fabcare) and contractor shall be uploaded while uploading tender Documents. (iv) The accepting officer shall issue necessary Go Head Sanction for carrying out major overhauling work after verification of MOU and confirmation from OEM (M/S Fabcare)

Supply only in replacement V Belt suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement VFD (Variable Frequency Drive) suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Display Controller (AXW Controller) suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Single Solenoid Valve suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Main Water Inlet Valve (Actuator Butterfly Valve) suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Main Drain Valve (Actuator Butterfly Valve) suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Main Steam Inlet Valve Automatic suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement S.S Flexible Hose (For Steam Inlet) suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement S.S Flexible Hose 2" suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Main Drive Aluminium Pulley suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Main Bearing Set suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Main Bearing Seal Set suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Main Bearing Circlip suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Pneumatic Fitting (Tee, Elbow, Connector) suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Pneumatic Pipe suitable for Washer Extractor -120 Kg capacity (Make- FABCARE, Model-AWXS 60, SM MES No. 863 P/7005-WE/07) complete all as specified and as directed.

Supply only in replacement Hose Pipe ( JK pipe 4") suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Hose Pipe ( JK pipe 2 ¼") suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Clamps 4" Heavy Fabricated S.S suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Clamps 2" suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Air Vent Pipe (JK pipe 2 ¼") suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement FRL Set suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement S.S Screws (For Main Cover) suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only Teflon Tape 1" width, 10 Metre length roll complete all as specified and as directed.

Supply only in replacement Pneumatic Cylinder Door LOCK suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Allen Key Bolt for main Housing suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Main Shocker suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Main Springs heavy suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Main Door Toughened Glass suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Door Lock Latch Handle suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement MCB TPN, C curve 40 Amp, 10KA, 415 Volt complete all as specified and as directed.

Supply only in replacement Thermo Couple suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Supply only in replacement Door Gasket suitable for Washer Extractor - 120 Kg capacity (Make- FABCARE, Model-AWXS 120, SM MES No. 863 P/7005-WE/07 complete all as specified and as directed.

Periodic, Preventive Maintenance of Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) with replacement of minor spare parts including cleaning, servicing, oiling, greasing etc complete with disconnecting electric/ steam/water connection through OEM man power complete all as specified and as directed. Notes:- (i) All sundries/minor items shall deemed to be included in quoted rates. (ii) Spare parts to be replaced shall be measured and paid as "Supply only" under the respective items of this Schedule (Item Nos 10.01 to 10.24). (iii) All periodic maintenance shall be done through OEM or their Authorised Agents only. An MOU between OEM (M/S Fabcare) and contractor shall be uploaded while uploading tender Documents.

Dismantling/Opening Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) for repair, Overhauling, and replacement of unserviceable spare parts comprising of dismantling the equipment using adequate labour and T&P for disconnecting steam / water/ Electric connection, Taking out defective spare parts / items and carrying out necessary major overhauling as required, fixing new spare parts, cleaning, servicing, oiling, greasing etc, making all water/steam/Electric connection, leak testing at desired pressure with and including testing, commissioning of each equipment at optimum efficiency as per the standard complete all as specified and as directed. Notes:- (i) All sundries/minor items shall deemed to be included in quoted rates. (ii) Spare parts to be replaced shall be measured and paid as "Supply only" under the respective items of this Schedule (Item Nos 10.01 to 10.24). (iii) All overhauling work shall be done through OEM or their Authorised Agents only. An MOU between OEM (M/S Fabcare) and contractor shall be uploaded while uploading tender Documents. (iv) The accepting officer shall issue necessary Go Head Sanction for carrying out major overhauling work after verification of MOU and confirmation from OEM (M/S Fabcare)

Supply only in replacement steam heating coils copper tube and aluminium Fins suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Main Drive V Belts suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Main Idler V Belts suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Steam Trape suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Bye Pass Assembly S.S. Ball valves suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Automatic Steam inlet valve suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Main Drive 2 Bearing + 2 pcs Sleeves suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Main IDLER Bearing + 4 pcs suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Pneumatic Pipes & Fittings suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Aluminium Blowers for Suction suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Glass with rubber Packing and S.S. screws suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Rubber Packing for lint screen suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Door Latches for lint screen suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Door Limit Switch suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement MCB 32 Amp TPN, 10KA 415 Volt suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Timer 0 - 60 suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Timer Rev - Fwd suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement contactor suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement MPD suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement DTC (Digital Temperature Controller) suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Thermo Couple suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Green Push Button suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Ind. Light suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Supply only in replacement Red push button suitable for Drying Tumbler- 60Kg capacity (Make- FABCARE, Model-DTS 60, SM MES No. 863 P/7012-DT/07, 863 P/7013-DT/07 & 863 P/7015-DT/07) complete all as specified and as directed.

Periodic, Preventive Maintenance of Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) with replacement of minor spare parts including cleaning, servicing, oiling, greasing etc complete with disconnecting electric/ steam/water connection through OEM man power complete all as specified and as directed. Notes:- (i) All sundries/minor items shall deemed to be included in quoted rates. (ii) Spare parts to be replaced shall be measured and paid as "Supply only" under the respective items of this Schedule (Item Nos 12.01 to 12.32). (iii) All periodic maintenance shall be done through OEM or their Authorised Agents only. An MOU between OEM (M/S Fabcare) and contractor shall be uploaded while uploading tender Documents.

Dismantling/Opening Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) for repair, Overhauling, and replacement of unserviceable spare parts comprising of dismantling the equipment using adequate labour and T&P for disconnecting steam / water/ Electric connection, Taking out defective spare parts / items and carrying out necessary major overhauling as required, fixing new spare parts, cleaning, servicing, oiling, greasing etc, making all water/steam/Electric connection, leak testing at desired pressure with and including testing, commissioning of each equipment at optimum efficiency as per the standard complete all as specified and as directed. Notes:- (i) All sundries/minor items shall deemed to be included in quoted rates. (ii) Spare parts to be replaced shall be measured and paid as "Supply only" under the respective items of this Schedule (Item Nos 12.01 to 12.32). (iii) All overhauling work shall be done through OEM or their Authorised Agents only. An MOU between OEM (M/S Fabcare) and contractor shall be uploaded while uploading tender Documents. (iv) The accepting officer shall issue necessary Go Head Sanction for carrying out major overhauling work after verification of MOU and confirmation from OEM (M/S Fabcare)

Supply only in replacement Flannel Cloth suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Final Cover suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Conveyor Belts Imported with hook & pin as spare suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Guide Tape suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Main Bearing Set Roller suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Flexible S.S. Hose Pipes suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement VFD (Variable Frequency Drive) suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement V-Belts suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement FRL suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Pneumatic Fitting & Pneumatic Pipe suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement MCB, 32 Amp, TPN, 10KA, 415Volt complete all as specified and as directed.

Supply only in replacement Push Button suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Ind. Light suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Temperature Meter suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Thermo Couple suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Gripper for Duffle Roll suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Steam Trape with complete assembly including steam valve suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Ball Valve for Steam Trape suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Limit Switch suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Pressure Gauge suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Air Regulator Front Side suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Contactor suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Single Phase Preventer suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement O/L Relay suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement 4" Flexible pipe blower Exhaust suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Solenoid Valve suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Main Pneumatic Air Cylinder suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Main Motor suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Blower Motor suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Gear Box suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Main Gear + Pinion Set suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Supply only in replacement Angle Valve for Steam Inlet suitable for Flat Work Ironer, Size-830mm X 3300mm (Make- FABCARE, SM MES No. 863 P/7020-FI /07) complete all as specified and as directed.

Periodic, Preventive Maintenance of Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) with replacement of minor spare parts including cleaning, servicing, oiling, greasing etc complete with disconnecting electric/ steam/water connection through OEM man power complete all as specified and as directed. Notes:- (i) All sundries/minor items shall deemed to be included in quoted rates. (ii) Spare parts to be replaced shall be measured and paid as "Supply only" under the respective items of this Schedule (Item Nos 14.01 to 14.27). (iii) All periodic maintenance shall be done through OEM or their Authorised Agents only. An MOU between OEM (M/S Fabcare) and contractor shall be uploaded while uploading tender Documents.

Dismantling/Opening Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) for repair, Overhauling, and replacement of unserviceable spare parts comprising of dismantling the equipment using adequate labour and T&P for disconnecting steam / water/ Electric connection, Taking out defective spare parts / items and carrying out necessary major overhauling as required, fixing new spare parts, cleaning, servicing, oiling, greasing etc, making all water/steam/Electric connection, leak testing at desired pressure with and including testing, commissioning of each equipment at optimum efficiency as per the standard complete all as specified and as directed. Notes:- (i) All sundries/minor items shall deemed to be included in quoted rates. (ii) Spare parts to be replaced shall be measured and paid as "Supply only" under the respective items of this Schedule (Item Nos 14.01 to 14.27). (iii) All overhauling work shall be done through OEM or their Authorised Agents only. An MOU between OEM (M/S Fabcare) and contractor shall be uploaded while uploading tender Documents. (iv) The accepting officer shall issue necessary Go Head Sanction for carrying out major overhauling work after verification of MOU and confirmation from OEM (M/S Fabcare)

Supply only in replacement SINGLE SOLENOID VALVE 1/4 CEME FOR TABLE suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement HAND IRON 2128 MODEL suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement HEAVY IRON OF TI 125 suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement CONTACT BLOCK 1NO+1NC) complete all as specified and as directed.

Supply only in replacement CONTACT BLOCK 2NO+2NC complete all as specified and as directed.

Supply only in replacement CONTACTOR 9A complete all as specified and as directed.

Supply only in replacement CONTACTOR 18A complete all as specified and as directed.

Supply only in replacement CONTACTOR 25A complete all as specified and as directed.

Supply only in replacement CONTACTOR 40 A complete all as specified and as directed.

Supply only in replacement DOOR GASKIT suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement FRL 1/4 suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement FRL 1/2" suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement INDICATING LIGHT suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement INDICATING LIGHT CLEAR suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement Limit switch suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement MPD 0-10 suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement MPD 7-20 suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement Pneumatic Actuator fitted butterfly Valve suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement Pressure switch suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement Push Butten suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement Reversing timer, Analog type suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement SINGLE SOLENOID VALVE 1/4 suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement SS CASTING BALL VALVE FOR STEAM INLET 1/2" suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement SS CASTING BALL VALVE FOR STEAM INLET 3/4" suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement TEMPRATURE METER 72 X 72 suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement THERMO CUPLE 3MTR suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Supply only in replacement THERMO CUPLE 5MTR suitable for Vacuum steam Ironing finishing table machine (Make- FABCARE, MODEL- FIB 42, SM MES No.863 P/7029-VF/07 & 863 P/7030-VF/07) complete all as specified and as directed.

Notes for BOQ Srl item Nos 01, 07, 09, 11 & 13:- (i) Contractor should arrange necessary T & P and manpower from OEM to attend day to day / preventive maintenance / breakdown maintenance as intimated by JE E/M/ AGE E/M as and when required. The quoted rates shall be inclusive of all and no extra cost admissible in this regard. If contractor should fail to attend complaint within 08 Hrs the penalty for a sum of 1000/- per Hr per equipment shall be recovered from contractor dues. (ii) The quoted rate inclusive the cost of minor spare parts like water Hose pipes with clamps, Steam connection, water supply connections and accessories along with necessary plumbing works, Control wires and cables along with thimbles and lugs , calibration of PLCs , Push buttons and Indicator with LED Lamp etc . The quoted rates shall be inclusive of all and no extra cost admissible in this regard.

MOU REQUIRED FOR ALL BIDDER:- “All Mechanical Laundry equipments & machinery and Commercial RO installed at Base Hospital Delhi Cantt are of Make “ FABCARE ” and "ION ECHANGE" respectively and maintenance of the same has been considered in subject work tender. The bidders shall submit latest MOU of agreement with OEM (M/S FABCARE for laundry machines and M/S ION EXCHANGE for RO Plant) for providing genuine spare parts and skilled technician for attending day to day breakdown/ complaint and also for overhauling of all laundry plant equipment and RO Plant as required. MOU between OEM (M/S Fabcare /ION EXCHANGE) and contractor shall be uploaded while uploading tender Documents.

Dismantling of the equipments using adequate labour and repairing, welding and replacement of defective wheels, nut and bolts suitable for Washroom Trolley, Dry Linen Trolley, Shelf Trolley and Mobile Table of Make FABCARE complete all as specified and as directed. Note:- Spare parts to be replaced shall be measured and paid under the respective item of this BOQ as "Supply only".

Supply only in replacement Wheel Size 6" with brake complete all as specified and as directed.

M & L for rewinding Air compressor three phase motor of capacity 4 KW/ 5 HP, Make-ELGI equipments Limited/ Bharat Bijlee, 1435RPM speed by dismantling the electric supply, removing the burnt copper winding and rewinding the motor with appropriate gauge of super enamelled superior quality of copper wire, varnishing, heating, replacment of both ball bearing, reassembling the same and testing complete all as specified and as directed.

M & L for overhauling of the compressor of capacity 5 HP, Max working pressure -12Kg/Sqcm, HYD test pressure -(19.8 or 20) Kg/Sqcm, AIR tank capacity-220 Ltr, Make- Kirloskar/ ELGI by disconnecting the compressor from motor, opening and replacing following worn out spare parts and oil with reassemling complete compressor & refixing in same position & connecting including control panel repair, replacing the rusted nuts, bolts, washers etc and testing complete all as specified and as directed: - (a) Gear wheel - 02 Set (b) Distance ring - 01 No (c) Injection rings - 04 Nos (d) Piston rings - 16 Nos (e) Pressing bush - 04 Nos (f) O- Ring - 01 No (g) Oil Seal - 01 No (h) Tensioning element - 02 Nos (i) Upper and lower rotor Set - 02 Nos (j) Gasket packing - 02 Nos (k) Oil level sight glass - 02 Nos (l) Bearing set - 01 Set

S &F in repair MCB, 63 Amp, four pole, 10 KA, 415 Volt, 'C' curve type complete all as specified and as directed.

S &F in repair MCB, 25 Amp, four pole, 10 KA, 415 Volt, 'C' curve type complete all as specified and as directed.

S &F in repair MCB, 16 Amp, four pole, 10 KA, 415 Volt, 'C' curve type complete all as specified and as directed.

S & F in repair 63 Amp MCCB 4 pole, 16 KA complete all as specified and as directed.

S & F in repair sheet metal enclosure, DB, 8 way, SPN, IP-43, metal double door complete all as specified and as directed.

S & F in repair sheet metal enclosure, DB, 12 way, TPN, IP-43, metal double door complete all as specified and as directed.

S&F in replacement 40mm bore MS pipe, heavy duty 'C' class, confirming to IS 1239, with all fitting including necessary grounting, clipping on the wall, including cutting, threading, welding, and jointing etc as required including leak testing at desired pressure, including taking down existing SS/ MS pipe complete al as specified and as directed.

All as per Srl item No 25.00 here in before but 25 mm bore complete all as specified and as directed.

All as per Srl item No 25.00 here in before but 20 mm bore complete all as specified and as directed.

S&F in replacement steam ball valve suitable for 25mm bore iron pipe complete all as specified as directed.

S&F in replacement steam ball valve suitable for 20 mm bore complete all as specified and as directed.

M&L for insulation of 40 mm bore MS/GI pipe with bonded fibre glass wool, insulation density - 16kg/Cum, 50mm thickness including Aluminium Cladding complete all as specified and as directed.

All as per Srl item No 30.00 here in before but for 25 mm bore MS/GI pipe complete all as specified and as directed.

All as per Srl item No 30.00 here in before but for 20 mm bore MS/GI pipe complete all as specified and as directed.

S & F in repair Fuel Pump AJ6AC, Cat part No. P01FS10030 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair diffuser plate, size -132 mm dia (HSD), Cat part No. PBR5730009 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair nozzle of 7.5GPH capacity 45 degree, Cat Part No. P22NM20300 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair sequence controller- LFL 1.122 without base plate, Cat Part No. P42BC10220 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair Photo resistor QRA10, C ( UV Cell ), Cat part No. P22BE30040 suitable for 600 kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair temperature indicator, Cat part No. P42G190180 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair RTD assembly, 5 metre long, Cat part No. P44TE10030 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair limit switch, Cat part No. P41ZS10010 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair pressure switch, 0 -16 BAR, Cat part No. P41PS10040 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair low pressure switch, Ct part No. P41PS10010 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair safety valve, 1" BSPT Cat part No. P36SS2009M suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair burner rod, Cat part No. PBR6200063 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair Ignition transformer, Cat part No. P42G150060 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair electrode assembly, Cat part No. PBR6510006 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair Pressure gauge, 0-40KG, 68MM, 1/4" back connection, Cat part No. P41PG10170 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair filter element, Cat part No. P260190270 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

S & F in repair Pressure gauge, 0-25KG, 100MM, 3/8" BSPT back connection, Cat part No. P41PG10160 suitable for 600kg/Hour Thermax boiler, Model RXA-06 complete all as specified and as directed.

Descaling of boiler with complete service using pump arrangement for thermax boiler, RXA-06, capacity- 600 Kg/Hour complete all as specified and as directed.

Supply only descaling chemical MAX CLEAN -05 suitable for de- scaling of boiler coil complete all as specified and as directed.

Descaling of boiler with complete service using pump arrangement for boiler, capacity -200 Kg/Hour complete all as specified and as directed.

M&L for repairing/servicing including rewinding, single phase induction motor pump, Capacity- 1.5/2HP, using Super enameled copper winding wire of gauges equal to or more than existing winding wire, including replacement of sheet ‘E’ class insulation and sleeve Including the following jobs complete all as specified and as directed:- (a) Reassembling the motor & refixing (b) Cleaning washing ball bearing with kerosene Oil, greasing with new grease of Make Castrol, Refixing to its original position, replacement of unserviceable bearings, capacitor including testing and Commission complete.

M & L for preparation of surface by removing old paint by scraping with scrap paper/ sand paper and painting by applying two coat of super enamel synthetic paint on all pipe lines, butterfly valves, NRV, fittings of CI/ MS, Pumping set etc including writting letters SM/MES No. on pumping set with letter size of 10 cm hight complete all as specified and as directed. Note:- Cost of writing SM/MES No shall deemed to be included in quoted rate.

S & F in replacement Gland washer for motor pump cat part No.P01RDS0690 suitable for 600 Kg/Hour boiler of Make - Thermax complete all as specified and as directed.

S & F in replacement valve seat assembly, cat part No.P01RDS0320 suitable for 600 Kg/Hour boiler of Make - Thermax complete all as specified and as directed.

S & F in replacement constant voltage transformer of capacity 1000 VA suitable for 600 Kg/Hour boiler of Make - Thermax complete all as specified and as directed.

S&F in replacement monoblock water pump set, single phase, 240 V, capacity 0.5 HP, suction/delivery pipe 25 mm x 25 mm, Head range-6 to 40 Mtrs & discharge range - 3200 to 1600 LPH, fitted with thermal overload protector & IP-44 protection, 'B' class of insulation, Both side ball bearing double shielded including necessary GI tubing connection for incoming/ outgoing supply complete all as specified and as directed.

Supply laying and testing in replacement GI water tubing 25 mm bore, medium grade with all fittings with screwed and socketed joints and fixed complete to wall, ceiling or laid in floor etc. and making good the disturbed surface complete all as specified and as directed.

All as per Srl item No 59.00 here-in-before but 20 mm bore complete all as specified and as directed.

All as per Srl item No 59.00 here-in-before but 15 mm bore complete all as specified and as directed.

Supply only crystal salt as per sample for water softner plant of mechanical laundary plant complete all as specified and as directed.

Supply only PS Solution (packing 500 ml bottle) complete all as specified and as directed. Make- Maxotherm Pvt Ltd/ Thermax/ ION Exchange

Supply only MAXTREAT-3006 PH booster (packing 35kg carbury) complete all specified and as directed. Make- Maxotherm Pvt Ltd/ Thermax/ ION Exchange

Supply only MAXTREAT-3220 antiscaling chemical ( packing 35kg carbury) complete all as specified and as directed. Make- Maxotherm Pvt Ltd / Thermax/ ION Exchange

Supply, installation, testing & commissioning, factory made, CPRI approved, indoor typr LT panel board confirming to IS: 5039 with IP- 54 protection, made out of 2.0mm thick CRCA sheet, 415Volt, 3 phase , 50HZ, supply mounted on floor, with front openable, dust & varmin proof, gasket, TPN busbar duly insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall powder coated, suitable for & inclusive of the following equipments (As detailed at Srl No 66.01 here-in-after) including taking out old unservicable LT panel from exixting position complete all as specified and as directed:-

RUCHIKA ENGG.WORKS