Rehabilation of Jawai dam DRIP- II

Amount

Apron

Cutting & clearance of jungle, bushes, shrubs Ankra/lpomoea, Julieflora tpna etc. on canals and bunds in dry/moist/slushy conditions including disposal as per instructions of the engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect Hard / dense soil

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 40 mm

Random rubble stone masonry (using R. R. stones where 75 % stones tobenotlessthan 15 cmin sizein anydirection and weighingnotless than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate up to 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of 75 mm

Flush or ruled pointing on stone masonry including racking of joints and curing etc. complete including all leads of all construction materials in mortar ratio.In Cement sand mortar 1:3

Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and Laying in position of Cement concrete Design mix M-30 including leads of all construction materials, plasticizers (if required), curing, compaction and finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto(For mix design Cement content considered 428 kg/ cum of concrete) 20 mm

Supplying of M.S. reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using. Tor or ribbed bars (IS :1786-1985)

Side shuttering including propping etc. complete (to achieve finish F 2 for : Block joints of foundation stilling basins buckets, aprons etc. ( non -suspended horizontally laid mass concrete)

Drilling holes of 35 mm diameter for anchor rods. Upto 1.50 m. depth

(c)Supply of Tor steel anchor bars of required diameter, length and shape at site of work complete.

Labour charges for Fixing of anchor bars in neat cement grout including cost of cement and curing etc. complete

Add extra over item No. 2 for excavation under water for all type of strata including dewatering charges. (Quantity under water during actual work is only to be considered) Quantity of excavation below water level in foundation area during continous pump running should only be considered. 25% of Rate of excavation

Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts

Main Dam

Cutting & clearance of jungle, bushes, shrubs Ankra/lpomoea, Julieflora tpna etc. on canals and bunds in dry/moist/slushy conditions including disposal as per instructions of the engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respectHard / dense soil

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 40 mm

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Drilling holes of 35 mm diameter for anchor rods. (a) Upto 1.50 m. depth

(c)Supply of Tor steel anchor bars of required diameter, length and shape at site of work complete.

Labour charges for Fixing of anchor bars in neat cement grout including cost of cement and curing etc. complete

Supplying of M.S. reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using.-Tor or ribbed bars (IS :1786-1985)

Side shuttering including propping etc. complete (to achieve finish F 2 for : Block joints of foundation stilling basins buckets, aprons etc. ( non -suspended horizontally laid mass concrete)

Random rubble stone masonry (using R. R. stones where 75 % stones tobenotlessthan 15 cmin sizein anydirection and weighingnotless than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Add extra Masonry work in superstructure

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate up to 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of 75 mm.

Flush or ruled pointing on stone masonry including racking of joints and curing etc. complete including all leads of all construction materials in mortar ratio.-In Cement sand mortar 1:3

Providing and fixing of Precast concrete interlocking blocks of manufactured from fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS : 6717-2001. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the instructions of Engineer-in-charge. The rates to be inclusive of all lead, lift, lifts & taxes general specifications of blocks.1. Shape : As specified by Engineer-in-charge.2. Tensile splitting strength and breaking load as per BS : 6717-20013. Colour : Grey cement natural colour 4. Variation in Dimension : Less than 1.6mm.5. Variation in thickness : Less than 3.2mm b) 80mm thick

Preparation of surface of existing concrete surface/ masonry in lime mortar/ cement mortar including removal of organic deposit by washing with etching compound and use of wet sand blasting and final washing the surface with air and water jet including cost of all material and equipment required for the work complete.

37 mm thick shotcrete is to be applied after removal of defective concrete / masonry, cleaning of surface thoroughly, with compressor having base layer of 12mm, and second layer of 25 mm thickness in cement concrete (1:2:1) after proper fixing of 9 gauge welded mesh of good quality rust free of size 50 mm x 50 mm in two layers with anchors / clamps after cleaning the surface by wet sand blasting in stone masonry / concrete complete in all respect. Cement concrete comprising of cement, sand, coarse aggregate, water and quick setting compound in the proportion 1:2:1, sand and coarse aggregate conforming to IS 383 and table no. 1 of IS;9012 respectively.

Add extra over item No. 16 & 17 for each subsequent height 3.00 m or part there-of above initial lift of 5 m from ground level ( upward or downward)

Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 Mtr. height in R.S. Joists flats, tees, angles and channels.

P&F early steamer emmission type lightening arrester on GI mast with air terminal configured as spheroid which is comprised of separate electrically isolated 4 panels surrounding an earthed centralfinial,the terminal shall be tested by CPRI for impulse current of 45 KA (8/20 Sec)with 5 positive and 5 negetive impulse, the arrester having following protection radius at level 1 : 60-79 m

S& laying of down conductor of 70 Sqmm single core insulated flexible copper cable with accessories as required.

Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect.

Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Three or more coats).

Lightening arrangment,Cleaning of drain holes and dewatering arrangment of foundation gallary.

Providing, Laying, Jointing, Commissioning and Testing of ISI marked HDPE pipes of PE-100 grade for potable water as per IS 4984 (amended upto date) in assorted length with specials, valves etc. this including the pipes, jointing material, valve, specials etc. and other material himself own cost carting to site. Dismantling of road surface, excavation & earth work of trenches & as per detailed specification & drawing, then jointing with Jointing material/ Rubber Rings (HDPE Pipes, Jointing material/ Rubber Rings and other material shall be arranged by the contractor him self own cost). This includes, uPVC/ PVC/ HDPE Special like tees, bends, reducer, enlarger, end plug cutting of pipes and making of joints etc. and testing of system, cleaning of site complete job for: (Rates are Exclusive of Earth Work and WBM/ Chap/ Cement Concrete/ Bituminious Road cutting/ CI Specials/ CI Valves etc. for interconnection with other pipes, if required but including uPVC/ PVC/ HDPE specials like tees, bends, reducer, enlarger, end plug etc.)- Pipes Nominal Dia. (mm) 110 mm Dia.

Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect.

SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.150 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.15.0 HP, 3-Ø, (90-125Mtr, (400-167)LPM

10.0 HP, 3-Ø, (64-104)Mtr, (400-167)LPM

5.0 HP, 3-Ø, (32-52)Mtr, (400-167)LPM

Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors:For Three phase Submersible / Mono block pump:)12.5 HP to 17.5.0 HP ( Star / Delta

3.0 HP to 10HP (Star/Delta )

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. Long point (up to 10 mtr..) (AC Line for pump set )

P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with Copper conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 6.0 sqmm 3 core

4.0 sqmm 3 core

Drilling more than 48 mm but upto 76 mm dia, holes in over burden hard soil compacted earth, morrum etc. for consolidation / curtain grouting in stages by percussion drilling including cost of drilling equipment, compressed air, water etc. complete and re-drilling in the hole through set grout if required.Up to 5 m. depth

From 5 to 10 m depth

From 10 to 15 m depth

Normal pressure washing of drilled hole in stages in approved pattern for cleaning of clay, soil and other filler materials from the seams and joints in the foundation rock by establishing connections under pressure with air & water including cost of equipment, accessories compressed air, water, labour, admixtures if any required etc. complete as per specification.Up to 5 m. depth ( I stage)

From 5 to 10 m depth ( II stage)

From 10 to 15 m depth ( III stage)

P/ Laying P.V.C. / XLPE insulated & P/V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I/ IS:7098 P-I of group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection, testing wtc. as required of size 25 Sq.mm, 3 core (G-1)

Plate earth as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. Below the ground level with 25mm dia G.I. 'B' class watering pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and cock/charcoal, testing of earth resistance as required.

S& laying following size earth wire/strip in horizontal or vertical run ground / surface / recess including reveting, souldering, making connection etc. as required 6 SWG Copper wire

Supply & fixing of GI pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia complete in all respect ISI make.group B 40 mm dia

S&F off load change over switch four pole/2 pole, 230/ 415 V, conforming to IS:13947 P-III in sheet steel enclosure complete with connections with lugs, testing etc. as required in the following rating: 400 A four pole

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10KA (B/C/D triping chracteristic) ISI marked IS: 8828 (1996) / conforming to IEC:60898 in existing board / sheets including making connections, testing etc. as required. Double pole MCB 6 A to 32 A rating

SF of (0-500) V range volt meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required .Digital type

SF of CT operated direct reading type Ampere meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves/channel etc. as required.Digital type, below 500A

SF of 110/220 V, LED (22.5 mm dia) indicating lamp with integral circuit, terminal block, including connection etc. as required.Red/yellow/green

S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.25 mm 1-grade

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.3x 2.5 sq.mm (G-1)

3 x 4 sq. mm. (G-1)

Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required.`(G-1)

P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.13/18 watt (G-1)

P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.

Supply and making end termination with heavy aluminium lugs (Pin / Ring type) duly crimped with crimping tool, PVC type etc of size. 25.0 Sq.mm

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020101 Short PointShort point (up to 10 mtr.)(Group 1)

Supply and erection of Decorative Cast Iron pole as per approved design of following length with base plate on the cement concrete foundation of M-15 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III). The pole shall be made of Cast Iron as per IS 210:1993, precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole. The pole shall have a weatherproof flush door and locking arrangements, two/ one arm bracket of length of 430/380mm complete in all respect.- 4mtr. group-2}

P & F of IP 65/ 67 protected LED flood light system with aluminium housing, 3 X 1W, 220V, 50Hz LED lamps with dynamic color changing capability available in quick connecting cable coupled with various mounting accessories. Ability to create 16.7 million uniform, smooth and brilliant colors without revealing any lamp image. Available in 5 colors – amber, green, blue, red and white. group-2}

Dismantling cement concrete including disposal of material within 50 m lead, inclusive of de-watering wherever required.

Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Dark shade using ordinary cement.

Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge.

Strengthening of North Saddle dam and south saddle dam.

Cutting & clearance of jungle, bushes, shrubs Ankra/lpomoea, Julieflora tpna etc. on canals and bunds in dry/moist/slushy conditions including disposal as per instructions of the engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect.Hard / dense soil

Re-handing of excavated material including loading unloading and dressing within initial lead of 50 m and lift of 1.5m with cost of de-watering wherever required and all applicable taxes and levies etc. complete in all respect Earth / Soil

Add extra for each subsequent lead up to 5250 mtr

Add extra over item No. 3 for disposal of excavated material above initial lift of 1.5m and for every additional lift of 1.5m or part there of including loading and un- loading wherever required up to 15 m lift

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Supplying of M.S. reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using.-Tor or ribbed bars (IS :1786-1985)

Random rubble stone masonry (using R. R. stones where 75 % stones tobenotlessthan 15 cmin sizein anydirection and weighingnotless than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Add extra Masonry work in superstructure

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate up to 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of 75 mm

Flush or ruled pointing on stone masonry including racking of joints and curing etc. complete including all leads of all construction materials in mortar ratio.In Cement sand mortar 1:3

Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts

Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge.

Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

Add extra if square, rectangular hollow tubular sections are used.

Strengthening of Flank 'A' protection work of Jawai Main Dam

Cutting & clearance of jungle, bushes, shrubs Ankra/lpomoea, Julieflora tpna etc. on canals and bunds in dry/moist/slushy conditions including disposal as per instructions of the engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect Hard / dense soil

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 40 mm

Random rubble stone masonry (using R. R. stones where 75 % stones tobenotlessthan 15 cmin sizein anydirection and weighingnotless than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Add extra Masonry work in superstructure

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregatte up to 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of 75 mm

Flush or ruled pointing on stone masonry including racking of joints and curing etc. complete including all leads of all construction materials in mortar ratio.In Cement sand mortar 1:3

Earth work in rough (borrow area) excavation for embankment in hard soil, Morrum or highly weathered strata dry or moist, including laying in 20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted manually or by plain roller with initial lead of 250 m and lift up to 1.5m (excluding charges for compaction and watering), including loading and un-loading wherever required complete in all respect.

Add extra for each subsequent lead up to 5250 meter

Compaction of earth or highly weathered strata By manually or plain roller. (density 90% of Proctor)

Watering of earth including cost of carriage of water when source of water is up to 1 Km

Supplying and laying sand of grade as per design requirement in required profile including all lead & lifts.

Crusher broken stone aggregate of various sizes in accordance with IS:383 – 1970 for concrete work for dams, canals, and other important structures, well graded with size of aggregate including all lead and lift. 40 to 20 mm size

Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts

Dismentalling of masonary with care inclusive of dewatering wherever required (a) Dry masonary

Dry boulder filling in required profile with filling of voids etc. complete including all lead & lifts, and well finished surface

Rip rap stone laying in required profile properly hand packed using stone of specified size including all lead & lifts (b) 30 cm thickness (± 5 % thickness tolerance)

Strengthening of Flank 'B' protection work of Jawai Main Dam

Cutting & clearance of jungle, bushes, shrubs Ankra/lpomoea, Julieflora tpna etc. on canals and bunds in dry/moist/slushy conditions including disposal as per instructions of the engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect Hard / dense soil

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 40 mm

Random rubble stone masonry (using R. R. stones where 75 % stones tobenotlessthan 15 cmin sizein anydirection and weighingnotless than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Add extra Masonry work in superstructure

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate up to 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of 75 mm

Flush or ruled pointing on stone masonry including racking of joints and curing etc. complete including all leads of all construction materials in mortar ratio.In Cement sand mortar 1:3

Earth work in rough (borrow area) excavation for embankment in hard soil, Morrum or highly weathered strata dry or moist, including laying in 20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted manually or by plain roller with initial lead of 250 m and lift up to 1.5m (excluding charges for compaction and watering), including loading and un-loading wherever required complete in all respect.

Add extra for each subsequent lead of up to 5000 meter

Compaction of earth or highly weathered strata By manually or plain roller. (density 90% of Proctor)

Watering of earth including cost of carriage of water when source of water is up to 1 Km

Supplying and laying sand of grade as per design requirement in required profile including all lead & lifts.

Crusher broken stone aggregate of various sizes in accordance with IS:383 – 1970 for concrete work for dams, canals, and other important structures, well graded with size of aggregate including all lead and lift. 40 to 20 mm size

Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts(Quarry spalls for Embankment & Side slope )

Dry boulder filling in required profile with filling of voids etc. complete including all lead & lifts, and well finished surface

Rip rap stone laying in required profile properly hand packed using stone of specified size including all lead & lifts (b) 30 cm thickness (± 5 % thickness tolerance)

Repair & Renovation of irrigation Officer & staff colony & Office

Cutting & clearance of jungle, bushes, shrubs Ankra/lpomoea, Julieflora tpna etc. on canals and bunds in dry/moist/slushy conditions including disposal as per instructions of the engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick

Dismantling cement concrete including disposal of material within 50 m lead, inclusive of de-watering wherever required.

Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level IS 456-2000: 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size

P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.

Providing and fixing Ist quality standard White Ivory straight edge Glazed Tiles ISI marked [IS:13753] (Kajariya, Jhonson, Somani make etc. ) of size 450mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).

dismentling old plaster or skirting, racking out joints and cleaning the surface for plaster including disposal of rubbish to dumping ground within 50 m lead including dewatering if required.

plaster in cement sand mortar 1:3 including racking of joints, smooth finishing. And curing etc complete including all leads of all construction material of tkickness 20 mm.

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:New work (two or more coats) over and including scrapping and priming coat with cement primer.

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade :Old wood work (One or more coats).

Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid for

Providing and fixing 20 mm thick terrazo tile over roofing fixed in cement mortar 1:4 over bed of 25 thick.

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect Hard / dense soil

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Random rubble stone masonry (using R. R. stones where 75 % stones tobenotlessthan 15 cmin sizein anydirection and weighingnotless than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Add Extra Masonary work in Super structure

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate up to 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of 75 mm.

Flush or ruled pointing on stone masonry including racking of joints and curing etc. complete including all leads of all construction materials in mortar ratio.-In Cement sand mortar 1:3

Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Supplying of M.S. reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using.-Tor or ribbed bars (IS :1786-1985)

Side shuttering including propping etc. complete (to achieve finish F 2 for :Block joints of foundation stilling basins buckets, aprons etc. ( non -suspended horizontally laid mass concrete)

Providing and fixing of Precast concrete interlocking blocks of manufactured from fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS : 6717-2001. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the instructions of Engineer-in-charge. The rates to be inclusive of all lead, lift, lifts & taxes general specifications of blocks.1. Shape : As specified by Engineer-in-charge.2. Tensile splitting strength and breaking load as per BS : 6717-20013. Colour : Grey cement natural colour 4. Variation in Dimension : Less than 1.6mm.5. Variation in thickness : Less than 3.2mm b) 80mm thick

Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

S&F following sizes of ISI marked ( IS:14927 P - II ) PVC casing capping along with accessories like coupler, inner, outer, elbow, square box, tee etc. on surface with screws, expansion fasteners as required. 32 mm x 12 mm (Group 1)

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020101 Short Point

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020102 Medium Point

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020103 Long Point

P & F ISI marked (IS :3854) 16 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. (E070400) Gr-I

P & F ISI marked (IS :3854) 3/6 pin 16 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. (E071300) Gr-I

Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(E040500) Group -I

P/F ISI marked flush / surface type Buzzer including making connection testing etc. as required .Group - I ; E-072500

P & F IP-65 protected Wall mounted Bulk head light fixture suitable for 15/18 watt CFL lamp with integral control gear, housing made from cast alluminium with UV stabilized diffuser comprising of copper ballast, copper conductor including making connection testing etc. as required (without lamp)(E-200700)Gr-I

P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.7/9 watt

P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.13 watt

P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. 300 mm Sweep (900/1400 RPM) Gr-2

Wiring of 3 pin 5amp light plug point with 1.5Sqmm FR PVC insulated unsheathed flexible copper conductor 1.1kV grade and 1.5Sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kV grade (IS 694) of approved make in surface/recessed ISI marked medium duty PVC conduit & it's accessories, 18SWG M.S. Box with earthing terminal 6A Switch, 6A socket, 3.0mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers making connections, testing etc. as required. Group - I. E020701 On Board

Plate Earthing as per IS:3043 with G.I. earth plate of size 600 mm x 600 mm x 6mm by embodying 3 to 4 mtr. Below the ground level earth 20 mm dia. G.I.'B' class watering pipe including all accessories like nut, bolts reducer, nipple, wire meshed funnel and Ferro cement cover with C.I. frame of size 300 mm x 300 mm complete with alternate layer of salt & coke / charcoal, testing or Earth resistance as required E-150200

P & F 240/415V MCB of breaking capacity not less than 10KA (B/C/D tripping characteristic) ISI marked is 8828 (1996)conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc as required. Group- I E-060112 6 A to 32A rating

P &F 240/415V isolator conforming to IS13947-III/IEC 60947-3 on existing board/ sheet including making connections with lugs testing etc as required. Group- I E-60212 Double Pole Isolator 63A rating

P&F Recessed /surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar conforming to IS 13032 & IS 8623 including making terminal DB terminations with copper lugs testing etc as required. Group- I E-060513 - 8 way

Supply of GI pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia comp. in all respect ISI make. B class 40mm dia (E-261102)

Wiring of twin control light point with 1.5 sq.mm PVC insulated unsheathed solid / stranded aluminium conductor 1.1 kV grade and 2.5 sq. mm nominal size PVC insulated unsheathed solid / stranded aluminium earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A two way switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.(E-020601) Gr-I Short point (up to 3 mtr.)

P & F 9/11/13/ Watt CFL mirror light with CRCA powder coated housing,diffuser,end covers,copper ballast,holder prewired upto terminal block including making connection testing etc. as required (without tube) (E-191700)Gr-I

P/F decorative Round / Square shape surface mounting ceiling fitting complete with holder, aluminium anodized back plate glass globe of approved design, prewired terminal block making connection. Testing etc. as required as approved by the Engineer in charge .Group -I ;E-192003-250mm

Wiring for sub mains ISI marked (IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. Support wire duly clipped etc. as required 6.0 sq.mm (E-040402) Group-I

P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required.175mm x 100mm x 60mm (E-050104)

P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nut and bolts as required. 4.8 mm thick (E050502) Group - 1

Supply and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS 694) of 1.1 kV grade and approved make I existing surface or recessed conduit/ casing capping including making connections etc. as required.(E-040109) 3 x 2.5 Sqm.

Supply and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS 694) of 1.1 kV grade and approved make I existing surface or recessed conduit/ casing capping including making connections etc. as required (E-040113) 2 x 4.0 Sq. mm

P/F 18 SWG M.S recessed fan box hexagonal / round of size 130 mm dia. Depth 75 mm with 12 mm dia. Rod for fan hook with 100 mm length extended on each side. Group - I (E-170600)

S/L following size Earth wire / strips in horizontal or vertical run in ground / surface / recess including riveting, soldering, saddles making connection etc. as required 10 SWG Copper Wire. (E-150703 )

P/F IS:371 marked 6 amp surface type ceiling rose including making connection, testing etc. as required Group- I; E-071400

P/F ISI marked 6 amp bakelite batten / angle holder including making connection, testing etc. as required . Group -I ; E-071500

S&F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. Gr-I E-020401 20mm

S&F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. Gr-I E-020402 25 mm

P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep 5 Star rated G-1(E170501) @ 1896/-

P & F surface/recessed type 10 mm thick teak wood board dule antitermite treated, varnished and fixed by using gutties/ PVC fastners of following size as required. 300mmX375mm (E050906 ) Gr-I

Providing and fixing factory made solid core single leaf Door shutter made out of composite ECO friendly wood laminated with 0.8 mm thick polymer termite and water resistant five retendent technology, gluing by vacuum lamination technology various premoulded design on both face as per IS-2202 (Part-I) 1991 (Door fitting shall be supplied by the department):30mm thick (2100mmx900mm size)

Repair and renovation of sanderao colony.

Dismantling cement concrete including disposal of material within 50 m lead, inclusive of de-watering wherever required.

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and fixing 20 mm thick terrazo tile over roofing fixed in cement mortar 1:4 over bed of 25 thick.

Repair to cement plaster in cement mortar 1:6 (1-Cement:6-fine sand) including removal of old plaster in regular shape and white or colour washing.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:New work (two or more coats) over and including scrapping and priming coat with cement primer.

Random rubble stone masonry (using R. R. stones where 75 % stones tobenotlessthan 15 cmin sizein anydirection and weighingnotless than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Add Extra Masonary work in Super structure

Flush or ruled pointing on stone masonary including racking of joints and curing etc.complete including all leads of all construction materials in mortar ratio:In Cement Sand Mortor 1:3

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken agg up to 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of :75 mm

S&F following sizes of ISI marked ( IS:14927 P - II ) PVC casing capping along with accessories like coupler, inner, outer, elbow, square box, tee etc. on surface with screws, expansion fasteners as required. 32 mm x 12 mm (Group 1)

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020101 Short Point

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020102 Medium Point

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020103 Long Point

P & F ISI marked (IS :3854) 16 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. (E070400) Gr-I

P & F ISI marked (IS :3854) 3/6 pin 16 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. (E071300) Gr-I

Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(E040500) Group -I

P/F ISI marked flush / surface type Buzzer including making connection testing etc. as required .Group - I ; E-072500

P & F IP-65 protected Wall mounted Bulk head light fixture suitable for 15/18 watt CFL lamp with integral control gear, housing made from cast alluminium with UV stabilized diffuser comprising of copper ballast, copper conductor including making connection testing etc. as required (without lamp)(E-200700)Gr-I

P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.7/9 watt

P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.13 watt

P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. 300 mm Sweep (900/1400 RPM) Gr-2

Wiring of 3 pin 5amp light plug point with1.5 Sqmm FR PVC insulated unsheathed flexible copper conductor 1.1kV grade and 1.5Sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kV grade (IS 694) of approved make in surface/recessed ISI marked medium duty PVC conduit & it's accessories, 18SWG M.S. Box with earthing terminal 6A Switch, 6A socket, 3.0mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers making connections, testing etc. as required. Group - I. E020701 On Board

Plate Earthing as per IS:3043 with G.I. earth plate of size 600 mm x 600 mm x 6mm by embodying 3 to 4 mtr. Below the ground level earth 20 mm dia. G.I.'B' class watering pipe including all accessories like nut, bolts reducer, nipple, wire meshed funnel and Ferro cement cover with C.I. frame of size 300 mm x 300 mm complete with alternate layer of salt & coke / charcoal, testing or Earth resistance as required E-150200

P & F 240/415V MCB of breaking capacity not less than 10KA (B/C/D tripping characteristic) ISI marked is 8828 (1996)conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc as required. Group- I E-060112 6 A to 32A rating

P &F 240/415V isolator conforming to IS13947-III/IEC 60947-3 on existing board/ sheet including making connections with lugs testing etc as required. Group- I E-60212 Double Pole Isolator 63A rating

P&F Recessed /surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar conforming to IS 13032 & IS 8623 including making terminal DB terminations with copper lugs testing etc as required. Group- I E-060513 - 8 way

Supply of GI pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia comp. in all respect ISI make. B class 40mm dia (E-261101)

Wiring of twin control light point with 1.5 sq.mm PVC insulated unsheathed solid / stranded aluminium conductor 1.1 kV grade and 2.5 sq. mm nominal size PVC insulated unsheathed solid / stranded aluminium earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A two way switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.(E-020601) Gr-I Short point (up to 3 mtr.)

P & F 9/11/13/ Watt CFL mirror light with CRCA powder coated housing,diffuser,end covers,copper ballast,holder prewired upto terminal block including making connection testing etc. as required (without tube) (E-191700)Gr-I

P/F decorative Round / Square shape surface mounting ceiling fitting complete with holder, aluminium anodized back plate glass globe of approved design, prewired terminal block making connection. Testing etc. as required as approved by the Engineer in charge .Group -I ;E-192003-250mm

Wiring for sub mains ISI marked (IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. Support wire duly clipped etc. as required 6.0 sq.mm (E-040402) Group-I

P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required.175mm x 100mm x 60mm (E-050104)

P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nut and bolts as required. 4.8 mm thick (E050502) Group - 1

Supply and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS 694) of 1.1 kV grade and approved make I existing surface or recessed conduit/ casing capping including making connections etc. as required.(E-040109) 3 x 2.5 Sqm.

Supply and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS 694) of 1.1 kV grade and approved make I existing surface or recessed conduit/ casing capping including making connections etc. as required (E-040113) 2 x 4.0 Sq. mm

P/F 18 SWG M.S recessed fan box hexagonal / round of size 130 mm dia. Depth 75 mm with 12 mm dia. Rod for fan hook with 100 mm length extended on each side. Group - I (E-170600)

S/L following size Earth wire / strips in horizontal or vertical run in ground / surface / recess including riveting, soldering, saddles making connection etc. as required 10 SWG Copper Wire. (E-150703 )

P/F IS:371 marked 6 amp surface type ceiling rose including making connection, testing etc. as required Group- I; E-071400

P/F ISI marked 6 amp bakelite batten / angle holder including making connection, testing etc. as required . Group -I ; E-071500

S&F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. Gr-I E-020401 20mm

S&F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. Gr-I E-020402 25 mm

P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep 5 Star rated G-1(E170501) @ 1896/-

P & F surface/recessed type 10 mm thick teak wood board dule antitermite treated, varnished and fixed by using gutties/ PVC fastners of following size as required. 300mmX375mm (E050906 ) Gr-I

Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid for

Providing and fixing factory made solid core single leaf Door shutter made out of composite ECO friendly wood laminated with 0.8 mm thick polymer termite and water resistant five retendent technology, gluing by vacuum lamination technology various premoulded design on both face as per IS-2202 (Part-I) 1991 (Door fitting shall be supplied by the department):30mm thick (2100mmx900mm size)

Repair and renovation of takhatgarh dak banglow

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect Hard / dense soil

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 40 mm

Random rubble stone masonry (using R. R. stones where 75 % stones tobenotlessthan 15 cmin sizein anydirection and weighingnotless than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Add Extra Masonry work in superstructure

Flush or ruled pointing on stone masonary including racking of joints and curing etc.complete including all leads of all construction materials in mortar ratio In Cement Sand Mortor 1:3

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate up to 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of 75 mm

Dismantling cement concrete including disposal of material within 50 m lead, inclusive of de-watering wherever required.

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and fixing 20 mm thick terrazo tile over roofing fixed in cement mortar 1:4 over bed of 25 thick.

Repair to cement plaster in cement mortar 1:6 (1-Cement:6-fine sand) including removal of old plaster in regular shape and white or colour washing.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:New work (two or more coats) over and including scrapping and priming coat with cement primer.

S&F following sizes of ISI marked ( IS:14927 P - II ) PVC casing capping along with accessories like coupler, inner, outer, elbow, square box, tee etc. on surface with screws, expansion fasteners as required. 32 mm x 12 mm (Group 1)

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020101 Short Point

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020102 Medium Point

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020103 Long Point

P & F ISI marked (IS :3854) 16 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. (E070400) Gr-I

P & F ISI marked (IS :3854) 3/6 pin 16 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. (E071300) Gr-I

Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(E040500) Group -I

P/F ISI marked flush / surface type Buzzer including making connection testing etc. as required .Group - I ; E-072500

P & F IP-65 protected Wall mounted Bulk head light fixture suitable for 15/18 watt CFL lamp with integral control gear, housing made from cast alluminium with UV stabilized diffuser comprising of copper ballast, copper conductor including making connection testing etc. as required (without lamp)(E-200700)Gr-I

P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.7/9 watt

P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.13 watt

P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. 300 mm Sweep (900/1400 RPM) Gr-2

Wiring of 3 pin 5amp light plug point with 1.5Sqmm FR PVC insulated unsheathed flexible copper conductor 1.1kV grade and 1.5Sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kV grade (IS 694) of approved make in surface/recessed ISI marked medium duty PVC conduit & it's accessories, 18SWG M.S. Box with earthing terminal 6A Switch, 6A socket, 3.0mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers making connections, testing etc. as required. Group - I. E020701 On Board

Plate Earthing as per IS:3043 with G.I. earth plate of size 600 mm x 600 mm x 6mm by embodying 3 to 4 mtr. Below the ground level earth 20 mm dia. G.I.'B' class watering pipe including all accessories like nut, bolts reducer, nipple, wire meshed funnel and Ferro cement cover with C.I. frame of size 300 mm x 300 mm complete with alternate layer of salt & coke / charcoal, testing or Earth resistance as required E-150200

P & F 240/415V MCB of breaking capacity not less than 10KA (B/C/D tripping characteristic) ISI marked is 8828 (1996)conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc as required. Group- I E-060112 6 A to 32A rating

P &F 240/415V isolator conforming to IS13947-III/IEC 60947-3 on existing board/ sheet including making connections with lugs testing etc as required. Group- I E-60212 Double Pole Isolator 63A rating

P&F Recessed /surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar conforming to IS 13032 & IS 8623 including making terminal DB terminations with copper lugs testing etc as required. Group- I E-060513 - 8 way

Supply of GI pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia comp. in all respect ISI make. B class 40mm dia (E-261101)

Wiring of twin control light point with 1.5 sq.mm PVC insulated unsheathed solid / stranded aluminium conductor 1.1 kV grade and 2.5 sq. mm nominal size PVC insulated unsheathed solid / stranded aluminium earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A two way switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.(E-020601) Gr-I Short point (up to 3 mtr.)

P & F 9/11/13/ Watt CFL mirror light with CRCA powder coated housing,diffuser,end covers,copper ballast,holder prewired upto terminal block including making connection testing etc. as required (without tube) (E-191700)Gr-I

P/F decorative Round / Square shape surface mounting ceiling fitting complete with holder, aluminium anodized back plate glass globe of approved design, prewired terminal block making connection. Testing etc. as required as approved by the Engineer in charge .Group -I ;E-192003-250mm

Wiring for sub mains ISI marked (IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. Support wire duly clipped etc. as required 6.0 sq.mm (E-040402) Group-I

P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required.175mm x 100mm x 60mm (E-050104)

P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nut and bolts as required. 4.8 mm thick (E050502) Group - 1

Supply and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS 694) of 1.1 kV grade and approved make I existing surface or recessed conduit/ casing capping including making connections etc. as required.(E-040109) 3 x 2.5 Sqm.

Supply and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS 694) of 1.1 kV grade and approved make I existing surface or recessed conduit/ casing capping including making connections etc. as required (E-040113) 2 x 4.0 Sq. mm

P/F 18 SWG M.S recessed fan box hexagonal / round of size 130 mm dia. Depth 75 mm with 12 mm dia. Rod for fan hook with 100 mm length extended on each side. Group - I (E-170600)

S/L following size Earth wire / strips in horizontal or vertical run in ground / surface / recess including riveting, soldering, saddles making connection etc. as required 10 SWG Copper Wire. (E-150703 )

P/F IS:371 marked 6 amp surface type ceiling rose including making connection, testing etc. as required Group- I; E-071400

P/F ISI marked 6 amp bakelite batten / angle holder including making connection, testing etc. as required . Group -I ; E-071500

S&F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. Gr-I E-020401 20mm

S&F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. Gr-I E-020402 25 mm

P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep 5 Star rated G-1(E170501) @ 1896/-

P & F surface/recessed type 10 mm thick teak wood board dule antitermite treated, varnished and fixed by using gutties/ PVC fastners of following size as required. 300mmX375mm (E050906 ) Gr-I

Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid for

Providing and fixing factory made solid core single leaf Door shutter made out of composite ECO friendly wood laminated with 0.8 mm thick polymer termite and water resistant five retendent technology, gluing by vacuum lamination technology various premoulded design on both face as per IS-2202 (Part-I) 1991 (Door fitting shall be supplied by the department):30mm thick (2100mmx900mm size)

Construction of cantilever slab for turning of vehicles at jawai main dam

Demolishing stone rubble masonry including stacking of useable material and disposal of unuseable material within 50 meters lead inclusive of de-watering wherever required. In cement mortar

Random rubble stone masonry (using R. R. stones where 75 % stones tobenotlessthan 15 cmin sizein anydirection and weighingnotless than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Add extra Masonry work in superstructure

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 50 mm thick

Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Supplying of M.S. reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using. Tor or ribbed bars (IS :1786-1985)

Extra labour charges for RCC due to obstruction in laying and placing the reinforced cement concrete due to reinforcement. Columns, slabs, cantilevers projections staircases, lintels, beams, chajjas, Retaining walls, piers, abutments, galleries, arch covers, bed plates, sluice capstan bases etc

Plaster in cement sand mortar 1:3 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness: 20 mm

Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 Mtr. height in R.S. Joists flats, tees, angles and channels.

Side shuttering including propping etc. complete (to achieve finish F 2 for :Block joints of foundation stilling basins buckets, aprons etc. ( non -suspended horizontally laid mass concrete)

Drilling holes of 35 mm diameter for anchor rods.(a) Upto 1.50 m. depth

(c)Supply of Tor steel anchor bars of required diameter, length and shape at site of work complete.

Labour charges for Fixing of anchor bars in neat cement grout including cost of cement and curing etc. complete

Jawai dak banglow

Dismantling cement concrete including disposal of material within 50 m lead, inclusive of de-watering wherever required.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. Disposal of rubbish to the dumping ground within 50 mtr lead

Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead : Of area 3 square meter and below.

Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level IS 456-2000: 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size

Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 20 mm thick.

Painting with weather coat paint (Asin paint/ I.C.I./Berger or eq. ISI make paint) two or more coat to give an even shade on new work.

P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.Size 600 mm X 600 mm

Add extra over items No. 7.5 for floor work due to extra cost of cement mortar 1:4 (1-Cement :4- fine sand )20 mm thick

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and fixing 20 mm thick terrazo tile over roofing fixed in cement mortar 1:4 over bed of 25 thick.

P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:Brass 400 gms 15 mm nominal bore.

P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant (110) mm

P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :Size 610 mm x 510 mm.

P&F towel rail or ring of approved quality /make:C.P. brass towel rail elbow type with concealed screws size 600mm (heavy duty)

P&F looking mirrors with PVC frame of approved ( atul/equivalent) Size 500x400mm

P&F soap dish or tray of approved quality /make soap dish 380 mm

P&F Flush cock /Flush Valve (IS:9758Mark ) or WC of approved quality make : C.P. Brass Half - turn exposed 25 mm nominal bore

P&F white vitreous china double syphonic european WC (IS : 2556Mark ) with mounted WVC flushing cistern of ( IS : 2556 Mark ) of 10 litre capacity complete with all necessary internal fitting incl. Cutting and making good the wall and floor

Hand shower with 8 mm dia 1 mt. long PVC tube & wall hook complete

Providing and fixing of suspended false ceiling in the grid of 600 x 600 mm/600 x 600 to 900 x 900mm using aluminium tees with inter lock system of main tee, cross tee and wall angle (size of tee and angle approx. 25mm x 25mm or equivalent) etc. complete Using 200 x 20 x 1 mm section.

Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid )

P&F expanded grill made of anodised aluminium as per desing and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminium window/ vent with reqd. screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge.

P&F Horizontal blinds made out of 25mm wide aluminium powder coated strips with powder coated channel etc. compelte (Aerolux, vista, Mac or equivalent) as per direction or engineer in charge.

P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.5000 litres capacity.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)25 mm nominal outer dia pipes

P & F Mixing Range (15 mm) C.P. Wall mixer telephonic type crutch & telephonic shower.

P&F Bath shower of approved quality/ make .C.P. brassof Heavy & superior quality, revolving with adjustable key 150mm. Inner dia 90cm & 10 to 12 mtr deep

S&F following sizes of ISI marked ( IS:14927 P - II ) PVC casing capping along with accessories like coupler, inner, outer, elbow, square box, tee etc. on surface with screws, expansion fasteners as required. 32 mm x 12 mm (Group 1)

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020101 Short Point

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020102 Medium Point

Wiring of light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grad e and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kVgrade (IS 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18SWGM.S. box with earthing terminal 6A, switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections testing etc. as required. Group -I E020103 Long Point

P & F ISI marked (IS :3854) 16 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. (E070400) Gr-I

P & F ISI marked (IS :3854) 3/6 pin 16 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. (E071300) Gr-I

Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(E040500) Group -I

P/F ISI marked flush / surface type Buzzer including making connection testing etc. as required .Group - I ; E-072500

P & F IP-65 protected Wall mounted Bulk head light fixture suitable for 15/18 watt CFL lamp with integral control gear, housing made from cast alluminium with UV stabilized diffuser comprising of copper ballast, copper conductor including making connection testing etc. as required (without lamp)(E-200700)Gr-I

P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.7/9 watt

P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.11 watt

P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. 300 mm Sweep (900/1400 RPM) Gr-2

Wiring of 3 pin 5amp light plug point with 1.5Sqmm FR PVC insulated unsheathed flexible copper conductor 1.1kV grade and 1.5Sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1kV grade (IS 694) of approved make in surface/recessed ISI marked medium duty PVC conduit & it's accessories, 18SWG M.S. Box with earthing terminal 6A Switch, 6A socket, 3.0mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers making connections, testing etc. as required. Group - I. E020701 On Board

Plate Earthing as per IS:3043 with G.I. earth plate of size 600 mm x 600 mm x 6mm by embodying 3 to 4 mtr. Below the ground level earth 20 mm dia. G.I.'B' class watering pipe including all accessories like nut, bolts reducer, nipple, wire meshed funnel and Ferro cement cover with C.I. frame of size 300 mm x 300 mm complete with alternate layer of salt & coke / charcoal, testing or Earth resistance as required E-150200

P & F 240/415V MCB of breaking capacity not less than 10KA (B/C/D tripping characteristic) ISI marked is 8828 (1996)conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc as required. Group- I E-060112 6 A to 32A rating

P &F 240/415V isolator conforming to IS13947-III/IEC 60947-3 on existing board/ sheet including making connections with lugs testing etc as required. Group- I E-60212 Double Pole Isolator 63A rating

P&F Recessed /surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar conforming to IS 13032 & IS 8623 including making terminal DB terminations with copper lugs testing etc as required. Group- I E-060513 - 8 way

Supply of GI pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia comp. in all respect ISI make. B class 40mm dia (E-261101)

Wiring of twin control light point with 1.5 sq.mm PVC insulated unsheathed solid / stranded aluminium conductor 1.1 kV grade and 2.5 sq. mm nominal size PVC insulated unsheathed solid / stranded aluminium earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A two way switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.(E-020601) Gr-I Short point (up to 3 mtr.)

P & F 9/11/13/ Watt CFL mirror light with CRCA powder coated housing,diffuser,end covers,copper ballast,holder prewired upto terminal block including making connection testing etc. as required (without tube) (E-191700)Gr-I

P/F decorative Round / Square shape surface mounting ceiling fitting complete with holder, aluminium anodized back plate glass globe of approved design, prewired terminal block making connection. Testing etc. as required as approved by the Engineer in charge .Group -I ;E-192003-250mm

Wiring for sub mains ISI marked (IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. Support wire duly clipped etc. as required 6.0 sq.mm (E-040402) Group-I

P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required.175mm x 100mm x 60mm (E-050104)

P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nut and bolts as required. 4.8 mm thick (E050502) Group - 1

Supply and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS 694) of 1.1 kV grade and approved make I existing surface or recessed conduit/ casing capping including making connections etc. as required.(E-040109) 3 x 2.5 Sqm.

Supply and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS 694) of 1.1 kV grade and approved make I existing surface or recessed conduit/ casing capping including making connections etc. as required (E-040113) 2x 4.0 Sq. mm

P/F 18 SWG M.S recessed fan box hexagonal / round of size 130 mm dia. Depth 75 mm with 12 mm dia. Rod for fan hook with 100 mm length extended on each side. Group - I (E-170600)

S/L following size Earth wire / strips in horizontal or vertical run in ground / surface / recess including riveting, soldering, saddles making connection etc. as required 10 SWG Copper Wire. (E-150703 )

P/F IS:371 marked 6 amp surface type ceiling rose including making connection, testing etc. as required Group- I; E-071400

P/F ISI marked 6 amp bakelite batten / angle holder including making connection, testing etc. as required . Group -I ; E-071500

S&F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. Gr-I E-020401 20mm

S&F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. Gr-I E-020402 25 mm

P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep 5 Star rated G-1(E170501) @ 1896/-

P & F surface/recessed type 10 mm thick teak wood board dule antitermite treated, varnished and fixed by using gutties/ PVC fastners of following size as required. 300mmX375mm (E050906 ) Gr-I

P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required 6A two way switch

6 A 3 pin shuttered socket

16 A 6 pin shuttered socket

5 step fan regulator 2 Module

P&F on load change over switch, front handle operated, four pole 415 V conforming to IS:13947 P-III including connections , testing etc. as required in the following rating: open execution type (125 A)

P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating elem 15 Ltr.

P & F box type fluorescent tube fitting fabricated from CRCA sheet and finished with powder coating / stove enamelled paint complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with 2x 36 watts with OCCB

P & F IP-65 protected street light luminaire on existing bracket suitable for HPSV/ MH LAMP, made from powder coated single piece pressure die cast aluminium housing, electrochemically brightened and anodized POT optics aluminium reflector, heat resistant Street light suitable for HPSV Lamp (1x70 Wt)

P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to Single door (three phase 4 way)

Supply and fixing of Modular work Station with Partition 32mm thick Aluminum top 25 mm thick MDF board with Membrane three drawer pedestal unit one KBT or one CPU trolley.Size 3600 x 2400 x 1200mm single seat in combination

SITC of Air Cooled Cassette type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (EP foam pipe section) upto 10 Mtr (IDU to ODU), copper power cable upto 10 Mtr (IDU to ODU), R-22 Refrigerant, wireless Remote, drain pump,suitable for 400/230V +10% of 50 Hz ,1 /3 phase AC supply capable of performing cooling, dehumidification, Air circulation, filteration & ventilation of following capacity with Scroll / reciprocating / rotary compressor as specified.2 Ton( Group 1)

Providing and fixing factory made solid core single leaf Door shutter made out of composite ECO friendly wood laminated with 0.8 mm thick polymer termite and water resistant five retendent technology, gluing by vacuum lamination technology various premoulded design on both face as per IS-2202 (Part-I) 1991 (Door fitting shall be supplied by the department):30mm thick (2100mmx900mm size)

Construction of flow measuring structure at bera river (U/S side of jawai dam)

Cutting & clearance of jungle, bushes, shrubs Ankra/lpomoea, Julieflora tpna etc. on canals and bunds in dry/moist/slushy conditions including disposal as per instructions of the engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect- (b) Hard / dense soil

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 40 mm

Random rubble stone masonry (using R. R. stones where 75 % stones tobenotlessthan 15 cmin sizein anydirection and weighingnotless than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Add extra Masonry work in superstructure

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate up to 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of 75 mm

Flush or ruled pointing on stone masonry including racking of joints and curing etc. complete including all leads of all construction materials in mortar ratio 1:4

Nominal mix of Plain Cement Concrete well mixed and laid in position using 20% max permissible limit of plums above 160 mm and up to 450mm, including curing and finishing etc including all leads of all construction materials complete in all respect with well graded crusher broken stone aggregate. The plums shall be distributed evenly and shall be not closer than 150 mm from the surface.:-PCC Nominal Mix 1:2:4 with plum:- Max size of Aggregate 20 mm

Supplying of M.S. reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using.Tor or ribbed bars (IS :1786-1985)

Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand)and making good thejointsexcluding thecost ofcentering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Extra labour charges for RCC due to obstruction in laying and placing the reinforced cement concrete due to reinforcement. In foundation rafts, beams, columns bases stilling basins, buckets, aprons etc. (non suspended horizontally laid mass concrete)

Side shuttering including propping etc. complete (to achieve finish F 2 for : Retaining wall up stream or down- stream slope facings of dams and open faces of construction joints etc.

Filling crates with stone, in position at site including hinging with hot dipped G.I. Wire 5 mm dia, excluding cost of wire crates, including cost of stones in position complete in all respects.

Catch water drains on d/s and u/s of slant of embankment of dam

Dismantling cement concrete including disposal of material within 50 m lead, inclusive of de-watering wherever required.

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect- (b) Hard / dense soil

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Side shuttering including propping etc. complete (to achieve finish F 2 for :-Retaining wall, counterfort, abutment, wing walls up stream or downstream slope facings of dams and open faces of construction joints etc

Submergence Survey of jawai dam

Double levelling with auto level, for transfer of bench mark, recording levels at 30 meter interval and marking temporary bench mark at suiatble location.Level book, bench mark value and location and plotting of the survey data is to be submitted to the department :-In hilly area

Survey work of existing dam taking level @ 30 meter longitudinal spacing for L-section and 5 meter transverse spacing for X-section and preparation of L- section showing top of embankment, u/s & d/s toe level, sluice, spilling arrangement of existing dam and X-sections indicating location and extent of pitching, sluice, face wall, filter toe, berms etc. To prepare and provide top plan and X-section section of existing spilling arrangement (overflow/by wash) showing details of protection works/aprons, training wall, guide wall with block level [plan with levels @ 10 meter grid covering 50m u/s and 100m d/s area.Listing of visible distress in dam -section and spill and sluice arrangements is to be provided with this survey. Drawing of plan and sectional elevation of existing sluice, indicating u/s approach well, barrel and d/s toe wall up to joining of main canal indicating gate/operation system arrangement. (b) Height of Dam more than 10 meter from lowest nalla bed (For existing Dam) / Km 9900 Survey work with tot

Construction of Pucca bench mark mutton of size 30x30x75 cm in cement concrete (1:3:6) with maximum aggregate size of 40 mm with 75 cm long MS angle , size 25x25x5 mm embedded including curing transportation and fixing at site etc. complete with all leads & lifts.

Grid survey at interval of 30 x 30 meter to conduct submergence survey with total station instrument and prepare 0.50 m interval contour plan and superimposing over khasra map including all ancillary works as described in specifications and conditions of contract.Note: Khasra map will be provided by Department Marking of existing FRL, MWL, MDDL contours and dam alignment. Prepare area-elevation and storage -elevation curves and tables.

Construction of CC Road at Jawai main dam and its permisis.

Cutting & clearance of jungle, bushes, shrubs Ankra/lpomoea, Julieflora tpna etc. on canals and bunds in dry/moist/slushy conditions including disposal as per instructions of the engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect- (b) Hard / dense soil

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 40 mm

Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts(Quarry spalls for Embankment & Side slope )

Supply & fixing of Direction and place identification sign board made out of 2 mm thick M.S. sheet framed to angle iron 40x40x5 mm and two vertical posts of angle iron of size 65x65x6 mm 3 meter long with hold fasts, stove enameled paint reflective letter symbol complete of size. :120x75 cm.

Construction of Pedesatal of size 5.5' x 5.5 ' x 1.25' in stone masonry in CM 1:6 as per design and drawing complete with 25 mm thick plaster in CM 1:4 plaster and weather coat paint.

Supply & Fixing of one side polished Black granite/ White Marble stone 20 mm thick of size 3' x 2 ' with engraved and gold colour painted letters (up to 200 letters) & border as per direction of engineer - in charge on existing pedestals including transportation

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M-20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually,all complete as per MORTH specification Clause 408. Using Concrete Mixer

Laying of carpet on existing road on Flank A and Flank B

Providing and applying tack coat with Bitumen grade using mechanical bitumen pressure distributor distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.VG-10.

Providing and laying open graded premix carpet 20mm thick (compacted) on prepared surface in a single course as wearing course aggregates as per Table 500-23, heating bituminous binder @ 14.6 Kg/10 Sqm.(VG-30 grade) and aggregates in Hot Mix Plant, transporting the mixed material with tipper and laying with paver finisher to the required level and grade, rolling with power roller, 8-10 tonne but excluding cost of tack and seal coat with all leads. [MORTH Specification : Clause 511,112]In approved Hot Mix Plant as per clause 6.5 of Manual, including loading of aggregates with F.E loader with bitumen VG-30

Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall, including rolling with a smooth wheeled roller 8 - 10 tonne capacity finished to required level and grades, complete as per MORTH specification clause 513a) Type B - Premixed in in approved HMP as per clause 6.5 of manual having capacity 50 TPH comprising of aggregate (sand or grit) having size 2.36 mm to 180 micron @ 0.06 Cum per 10 Sqm and bitumen binder (VG-30) @ 6.8 Kg / 10 sqm and laying by hydrostatic paver finisher with sensor control, including mixing, transportation, laying, rolling etc. complete - will all leads

Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts

Laying of CC intrlocing block adjacent to cc and bituminious road in dam premisis.

Cutting & clearance of jungle, bushes, shrubs Ankra/lpomoea, Julieflora tpna etc. on canals and bunds in dry/moist/slushy conditions including disposal as per instructions of the engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respectHard / dense soil

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 40 mm

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and fixing of Precast concrete interlocking blocks of manufactured from fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS : 6717-2001. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the instructions of Engineer-in-charge. The rates to be inclusive of all lead, lift, lifts & taxes general specifications of blocks.1. Shape : As specified by Engineer-in-charge.2. Tensile splitting strength and breaking load as per BS : 6717-20013. Colour : Grey cement natural colour 4. Variation in Dimension : Less than 1.6mm.5. Variation in thickness : Less than 3.2mm b) 80mm thick

Repair and renovation of jawai dam overflow gates.

Labour charges for removal of existing wornout/damaged bottom rubber seal of crest Radial Gates, Vertical Gates and Intake Service Well Gates of Dam by cutting bolts with gas cutter, providing holes in new rubber seal insertion of sleevs and fixing over gates with nut blots, washer ect including cost of gas (LPG and Oxygen) cylinder etc complete.

Providing of Rubber seals as per IS:11855 for Dam sluice, canal, barrage, stop dam etc. gates of required size and type and specifications with testing, including all lead and lifts, packing & forwarding charges for all components etc. complete:-Rubber seal musical note type 100mmx44mm x14mm (44mm Bulb) Teflon cladded

Providing of MS Nut Bolts of required size and type, as per specifications with testing, including all lead and lifts, packing & forwarding charges for all components etc. complete.

Providing of High tensile MS Nut Bolts of required size and type, as per specifications with testing, including all lead and lifts, packing & forwarding charges for all components etc. complete.

Providing of Stainless steel counter shank nut bolts with washer of required size and type, as per specifications with testing, including all lead and lifts, packing & forwarding charges for all components etc. complete.

Cleaning gates/ hoists/ embedded parts for re- painting by removing rust, oil, paint, grease etc., by using wire brush, scrubber, rust remover and applying a coat of rust inhibitive compound etc., complete.

Painting of Spillway gates, sluice gates, canal gates (both vertical or radial),stop log gates, exposed embedded parts and all un machined ferrous surface (hoist cylinders, cylinder heads, hydraulic piping, pipe fittings, bonnet covers), exposed to water as per IS 14177,for which surface preparation by blast cleaning of class "B" primer coat (one coat) of inorganic zinc silicate (preferably airless spray)or alternatively, two coats of zinc rich primer(containing not less than 85% zinc on dry film) to give dry filmthickness of70 ± 5 micron and finish coat (two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150±5 micron per coats. Thus, total dry film thickness of all the coats, including primer coating, should not be less than 350 microns, this will be include expenses on mobilisation and demobilisation of equipments. For maintenance painting the surface preparation shall be done by appropriate hand and power tool cleaning, prior to hand power tool cleaning. Any heavy layer of rust should be removed by chipping visible oil, grease, dirt and other foreign material be cleaned using solvents like clean mineral spirits, xylol or white gasoline. After hand and power tool cleaning the surface should be cleaned of loose dust and debris and/or blast cleaned as laid down in para 7.0 of IS code 14177. After the surface preparation the primer and finishing coats shall be carried out as provided above for painting etc. complete:-Beyond 1.5m height

Oiling and greasing of Crest radial gates,Vertical Gates and Intake Service well Gates of Dam including all charges of man and material complete which include applying Cardium compound to wire ropes, oiling & greasing etc complete as per direction of Engineer in- Charge

Providing Casting machining and assembling of Head stocks assembly with handle complete for operating Tank, canal, barrage, stop dam gates , as per drawing with testing ,including cost of all materials as head stock body, GM Nut, Warm wheel, Gear, Bush ,Pin ,operating handle etc. with machinery, labour, cutting, aligning, welding, finishing, cleaning, painting etc. ,complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding transportation charges for structural steel components and other materials.Head Stock Worm & wheel type coupled set 63/56mm dia mm dia. threaded Nut ( Model WW- 90) two tone capacity, approx-322 kg weight

Providing Casting machining and assembling of Cast Steel Rollers assembly complete with testing ,including cost of all materials as Cast steel Rollers, Stainless steel Eccentric pin/shaft with square cut shape in one end for adjustment, Lock plate, bronze bush, cover plate ,nut bolts, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint, etc., complete as per specifications and approved drawings with all lead and lifts, tools and tackles, including packing & forwarding, transportation charges for structural steel components and other materials.

Straightening and machining work of structural steel sections (departmental materials) complete job, with all machinery as plainer machine etc., labour, cutting, aligning, finishing, cleaning, etc., complete as per specifications and approved drawings, with all lead and lifts, including packing & forwarding charges for structural steel components and other materials.Machining work of structural steel sections like as Guide T, Track etc. with plainer machine

Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors:For Three phase Submersible / Mono block pump:)