Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC PLOT NO 60 PHASE II HOUSING COLONY DISTT UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC Being Lowest Bidder | |
| 2 | L2₹37.5 L+₹1.2 L (3.27%)Rejected-AOC | L2 | Rejected-AOC OK | |
| 3 | L3₹37.8 L+₹1.5 L (4.14%)Rejected-AOC 15 BOH ROAD DEFENCE ENCLAVE AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L3 | Rejected-AOC OK | |
| 4 | L4₹38.6 L+₹2.3 L (6.38%)Rejected-AOC WARD NO 1 HOUSE NO 04 SUBASH NAGAR UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-AOC OK | |
| 5 | L5₹39.7 L+₹3.4 L (9.37%)Rejected-AOC C O EROS PALA EAST LABAN ROAD SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L5 | Rejected-AOC OK |
Tender Value
₹42.8 L
EMD Value
₹85,600
Closing Date
5 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Army) Dhar Road
GE (Army) Dhar Road
ADDN ALTERATION OF OFFRS MD ACCN BLDG NO NP 45 UP TO MAP SPECIFICATION AT TAWI VIHAR DHAR ROAD GRN UNDER GE ARMY DHAR ROAD
2024_MES_637150_2
8069/NIT-65/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (Army) Dhar Road
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE (Army) Dhar Road
₹85,600
Yes
24 Sept 2024
14 Feb 2024
7 Mar 2024
15 Feb 2024
5 Mar 2024
21 Feb 2024
Amount
Demolition of Brickwork or stone/ boulder masonry, built in CM incl all quoins, arches, pillars, etc, complete all as specified and directed .
M&L for Brickwork with sub class 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed.
-ditto- all as per above here in but except bricks.
M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as directed.
Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed
M&L for rendering 15 mm thick cement plaster in CM 1:6 on other than fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.
M&L, Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per manufacturer instructions at any height etc complete all as specified and directed. (WPC will be measured and paid separately).
Supply only liquid WPC
M&L for rendering 10 mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. .
M & L for applying two coats of oil bound distemper on wall over one coat of primer over new plasterd surfaces and obtain smooth finish complete all as directed.
M&L for applying two coats of exterior emulsion/weather coat paint over a coat of acrylic primer incl preparation of new plastered or unplastered surfaces of wall etc complete all as specified.
M & L for preparation of new plastered surface and applying three coats of white wash on ceiling over one coat of primer etc complete all as directed.
M&L for preparation of old surfaces by removal of existing treatmen and applying two coats of oil bound distemper over a coat of primer on surface of walls, complete all as spcified and directed.
M&L for applying 2mm thick wall care putty in two coats and smoothening the surfaces with sand paper/mechanised sanding incl preparation of plastered surfaces of wall complete all as specified and as directed.
M&L for applying two coats of exterior emulsion/weather coat paint over a coat of acrylic primer incl preparation of old surfaces of wall complete all as specified.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises all as directed.
M&L for non skid ceramic coloiured tiles joint free 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick screed bed in cement mortar (1:4) in floors etc complete all as specified and directed.
M&L for Glazed rectfied jointless light coloured group ceramic tiles, PEI Grade-0 of size 300x450mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as specified.
M&L for Vetrified ceramic coloured tiles, light shade 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 10mm thick bedding layer in cement mortar 1:4, complete all as specified.
M&L for Vetrified ceramic coloured tiles, light shade 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as specified.
M&L for Non - skid Ceramic colour tiles joint free 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 over brushing neat cement slurry @ 3Kg/sqm etc complete all as speciefied and directed.
-ditto- all as per above here in before but except in dado , skirting etc. set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:4 complete all as speciefied and directed.
M&L for 18-20mm thick Granite (Zed-Black) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick in cement mortar (1:4) bedding including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, with and including providing nosing to edges of slab and drilling of hole for gas pipe using mechanical method, complete all as specified & directed. Note: Granite stone slab shall be in single piece to fit.
M&L for marble 18-20 mm (green/any colour shade approved by EIC) thick over cement screed bed laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment ot match the shade to flooring / Window cills / steps,riser incl rubbing and polishing incl rounding to edge of marble and incl dismantling complete all as specified and directed.
Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and all as specified and directed.
Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and all as specified and directed.
M&L for factory made, 2nd class H.W, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section clause 8.24 (a) suppiled and fitted to chowkats, complete all as specified and directed by Engr-in-Charge
S&F for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panel and both side prelaminated with decorative face veneer with lipping/frame to match complete all as specified and directed.
M&L for factory made solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing and all as directed by the Engr- in-Charge.
S&F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per specification & drawingand as directed by Engr-in-Charge.
S&F for Door eye viewer, viewing angle 180 degree, mounting diameter 14mm, total size 4 x 2.5cm (LxD) with good quality glass eye lens, brass chromium plated fixed in position for door shutters, complete allas specified and directed.
S&F for door seal brush (Aluminium plate with nylon brush) of required length for any size of doors, fixed with stainless steel screw, complete all as specified and directed. Make : Harrison or equivalent.
M&L for Kitchen cabinet/cup board shutter/Partation/Shelves etc in required size at site made out of 18mm thick MDF board one side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2mm thick edge bonding taps or 90⁰ edge bent finish as per manufacturers instructions complete all as spd and directed.
S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate.
M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, complete all as specified.
M&L for pressed steel frames of size 125mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets with and including necessary fixing lugs, hinges (100mm medium weight-03 Nos on each rebate), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, complete all as specified.
M&L for pressed steel frames of size 75mmx60mm for cupboard frames with one or more rebates fabricated out of 1.25mm thick mild steel sheets with and including necessary fixing lugs, continuous (Piano) hinges mild steel bright finished or electrogalvanised width of flaps (when open) 30mm and fixed with chowkhat by rebated and welded, lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, complete all as specified.
M&L for Powder coated Aluminium windows/vents complete all as specified in particular specification and as shown on drawings for various sizes and pattern with following powder coated aluminium sections :-Notes :-A. The rates quoted for powder coated aluminium sections shall be deemed to include the fwg :-(i) Rubber gasket for fixing glass to window/vent shutters.(ii) Fixing of window with and including min 75x10 GI screws all around @ 300 c/c (Min 2 Nos on one side) with PVC RAWL PLUGS/Sleeves.(iii) Rollers, concealed lock cum handle & othe fittings for sliding shutters shall be provided as per manufactures instructions and approved by GE.(iv) Silicone sealant shall be applied on internal as well as external periphery of window and masonry joint to avoid water seepage.(v) All other sundries all as per manufacturer instructions and as directed. B. The rates quoted for powder coated sections shall exclude the cost following and shall be paid seerately under respective items of Sch 'A'/BOQ:-(i) Glass and wire mesh (ii) 40x40x3 aluminium angle provided on all corners of the windows. (c) Aluminum -U-channel shall be provided for fixing of wire mesh. (d) Powder coated aluminum handles and hinges for fixing of openable shutters C. OTHER (i) No allownace for wastage/overlaps shall be considered for payment. (ii) Range of dimension of opening size has been mentioned. the same shall be fixed as pe measurements of opening of windows as per site requirement by the GE/EIC during execution of work.(iii) Powder coated aluminuim section shall be provided all as shown on drawings ans as directed
(a) M&L for THREE TRACK powder coated aluminium section as in window/vents frame for sliding shutters.
(b) M&L for Powder coated aluminium sections as in window/vents frame
(c) M&L for Powder coated aluminium sections as in sliding window shutters.
(d) M&L for powder coated aluminium sections as in openable window shutter.
(e) M&L for Powder coated aluminium tower bolts 75mm long and fixed.
(f) M&L for powder coated aluminium butt higes 75mm and fixed.
(g) M&L for Powder coated aluminium handle 75mm and fixed
(h) M&L for Powder coated aluminium plate type II gate and shutter, hook and eyes 100mm and fixed
M&L for 4.8 mm thick glass ordinary quality, glazing or black with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane complete all as specified.
M&L for 5mm thick frosted glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane in repair complete all as specified.
S & F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed.
S & F for 30 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F for Magnetic catcher suitable for kitchen cabinet shutters, complete all as specified.
S&F for Extruded brass handle-150mm, fabricated type as approved by the GE, polished, (ISI marked), .
S&F for 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed.
S&F for aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250mm long, complete all as specified and directed.
S&F for aluminum handles cast type anodized 150mm long (ISI Marked) complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden new surfaces of any description over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.
M & L for two coat of synthetic enamel paint over one coat of red oxide, zinc chromiume on steel surface including preparation of new steel surface width or girth exc 10cm all as specified and directed.
M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed.
S&F for Stainless steel plate rack of size 750mm x 900mm x250mm as per sample kept in GE’s office of minimum thickness of strip not less than 0.50mm, fixed in repairs, complete all as directed.
S&F for Sink made of stainless steel sheet not less than 0.80mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 915x460mm with bowl size 410x330x160mm with and including stainless steel heavy duty waste coupling and PVC waste collapsible pipe, fixed in repairs, complete all as specified & directed.
S&F for Sink mixer with regular spout wall mounted with connecting legs and wall flanges and including all necessar fitting, complete all as specified.
S&F for Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified.
S&F for Wall mixer with provision for overhead showes with 115mm long bend pipe on upper side, connecting legs and wall flanges, complete all as specified and directed.
S&F for Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified.
S&F for Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified.
S&F for Corner glass shelf 200mm (brass brackets), fixed with brass screws and plugs, complete all as specified.
S&F for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, complete all as specified.
S&F for Angle valve with wall flange, 15mm bore, fancy type, chromium plated with long shank and cup, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repair, complete all as specified.
S&F for PVC connections 15mm size with Brass nuts of length 600mm, fixed in repairs, complete all as specified.
S&F for Vitreous China, wash hand basin, Thin Rim Table top white matt, of size 420x420x150mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as specified.
S&F for Chrromium plated brass Centre hole mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, complete all as specified.
S&F for One piece water closet with bowl for cupled WC with PP soft seat cover, cistern hinges fixing accessories and accessories set of size 360x680x765mm, 3.S trap outlet with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified.
S&F for Peg set of six, stainless steel of suitable length, complete all as specified.
S&F for Toilet paper holder,stainless steel, fixed with and including chromium plated brass screws and and wooden/plastic cleats on walls, complete all as specified.
S&F for Health faucet brass chromium plated with 8mm dia 1.2 mtr long flexible pipe and wall hook fixed with brass chromium plated screws, complete all as specified.
S&F for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe in repairs complete all as spd and directed.
S&F in repair of PVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern complete all as specified.
S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.Make EssEss or Jaquar
S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed repair in any position incl 20 mm dia float valve with aluminium fitting, GI nipple , socket or any other fittings as reqd to fixing the tank & incl dismantling existing water tank complete all as specified and directed.
'Ditto all as per ser item No above but 500 ltr capacity complete all as spd and directed.
S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. .
Taking up or down 15 mm dia bore steel tubing and connection complete all as specified and directed.
S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required, incl 10cm exc but not exc 20cm in girth all as directed and specified.
S&F GI tubing 15 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Refixing only steel tubing and connection 15 mm dia bore to wall and laid in floors complete all as specified and directed.
Taking up or down 20 mm dia bore steel tubing and connection complete all as specified and directed..
S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Refixing only steel tubing and connection 20 mm dia bore to wall and laid in floors complete all as specified and directed.
Taking up or down 25 mm dia bore steel tubing and connection complete all as specified and directed..
S&F GI tubing 25 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Refixing only steel tubing and connection 25 mm dia bore to wall and laid in floors complete all as specified and directed.
S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and MS ring (25x6 FI used) bolt at every 1.5 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
All as per ser item No above but laid in trench or in floor
S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .
S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. .
S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. .
S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .
S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .
S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
'Ditto all as per ser item No above but laid in trench or in floor
S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .
M&L for taking down existing roof treatment of any description and any type and position and removing the deberis from site outside MD land all as specified and directed by Engr-in-Charge
M&L for rendering 15mm thick in CM 1:4 on of brick work or concrete surface incl Brushing neat cement slurry with 3.0kg of cement per sq. metre finish ever and smooth (w/o using extra cement) incl WPC as per user manual at any height etc complete all as specified and directed. (WPC will be measured and paid separately).
M&L for Roof treatment for Non Accessible Roof :- priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm, Top surface of roof after carrying out treatment as specified here in above as per manufactur instructions, complete all as specified
M&L for Chicken wire mesh of size 12.5 mm and wire dia 0.51 mm (24 SWG) hexagonal construction, stretched firmly for roof treatment, complete all as specified.
M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) for roof pedding, finish even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge
M&L for Roof tretment for accessible roof :- priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm,complte all as specified
Taking down old PCC tiles from roof and removing bedding at any position and removing the deberis outside the MD land, complete all as specified and as directed.
M&L for Cement concrete tiles, coloured, machine pressed, factory made of size 30cmx30cm, 20mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid over and including 15mm thick screed layer in CM 1:4 over roofs, complete all as specified.
M&L for making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified.
S& F for False ceiling with Gypsum based ceiling tiles and frame work (with aluminium foil on one side) of size 595mm x 595mm of thickness not less than 9mm including with GI powder coated frame angle/tee grid frame work for ceiling with following specifications & incl disamntling ceiling board any type etc :-(a) Bottom Tee- 25mm x 25mm, 1.0mm thickness (b) Cross Tee- 25mm x 25mm, 1.0mm thickness .(c) Wall angle- 25mm x 25mm, 1.00mm thickness (d) 1.imm dia GI wire suspenders alonwith adjustable clamps to maintain levelling in cluding fixing to ceiling fasteners as per manufacturers instructions.(e) Rest all as directed by the GE Make: Vinyl TOUCH of LaGyp or equivalent in Make as per Appx `E' to Particular specification.
Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and complete all as directed and specified.
S&F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,eaves etc fixed with self tapping screws as specified complete all as specified as directed.
S & F for rolled sections as in main and cross beams, hip and jack rafters,truss, purlins where connected to common rafters and running rails, cleat or other connecting plates cutting, welding including Nut Bolts, Fe 410-W(Gde -E-250) quality A all as specified and directed.
M&L for Providing precast cement concrete 1:2:4 type B0 louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4, complete all as specified and as directed.
M&L for Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding.(d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m),(e) M&L for PCC 1:7 :12 for fillin of sunken portion after conceling all menbrane and sealing all joints to the entire with broken bats and light weight all as satisfaction of Engineer-in-Charge.
S&F for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanized steel staples supplied and fixed complete to wood or steel member, weight exc 4 kg per Sqm complete all as specified and directed.
M&L for framed work such as grills, gratings,framed guard bars, walk ways, railings; framework of water tanks, cooler stand ,rafters & purlins etc work conforming to Fe.290.Gde-E-16, complete all as specified and directed.
Mild steel Framed work as in safety doors fabricated out of mild steel hollow sections of sheet thickness not less than 1.6mm thick, MS square bars or other section with, rails, braces, sliding door bolt fabricated out of 16mm Ms round bar, staple etc with and including provn for fixing of wire mesh, complete and fixed to mild steel pressed chowkhats, complete all as specified and as directed.
S&F for Mild steel pressed handles-150mm, oval type, stove enamelled black fixing with ss screws/ welding .
S&F for Mild steel barrel tower bolts -200mm, stove enamelled black, with bright bolt and fixed with ss screws/ welding .
S&F for Mild steel sliding door bolts-250mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed with ss screws/ welding.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, as directed by the Engr-in-charge.
M&L for RCC Nominal mix type B1 1:2:4 (20mm graded aggregate) in landings, chajjas,shelves and similar articles with plain faces, set in cement mortar 1:4 complete all as specified and directed.
M&L for Providing, cement concrete B1 1:2:4 (20mm graded aggregate) as in in lintels upto 1.5m clear span, cills, steps, parapets and railings upto 60 cm in height, copings, kneelers, mud stops, rounded or chamfered on edges.
M&L brick work with sub class 'B' bricks, straight or curgved in cm 1:4 straight or cuved on plan to exc 6m mean radius complete all as directed and specified.
M&L rendering 15mm thick in CM (1:4) on brick work or concrete surfaces smooth & even without using extra cement complete all as directed and specified.
M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping/benching and all other similar works including necessary formwork complete all as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
M&L for RCC 1;2;4 (using 20mm graded agg) pre-cast cover slabs, shelves and similar articles complete all as directed and specified.
M&L for TMT Bar 10mm dia and over cut to length bend to shape required incl cranking, bending sprilly for hooping colmns hooking ends and binding with and incl MS wire (Anneled) not less than 0.9mm dia or securing with clips
Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level , concrete debris and rubbish to a distance n exc 100m as directed by the EIC.
M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base all as specified and directed.
M & L for 50 mm thick PCC 1:2:4 type B-1 (using 20mm graded agg. ) as in plinth protection / path/ any paved area .
M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing smooth and even without using extra cement all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block of 60mm thickness, any shape and size confirming to IS 15658 -2006 with grey cement, pigment complete all as specified and directed.
M & L for sand filling under floors or in foundation or as in sand coushing incl watering and consolidation complete all as specified.
M&L for Factory made Pre-cast cement concrete block type B1, 1:2:4 as in kerb stone made to shape as directed, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed.
Excavating in trenchs n exc 1.5m in depth and n exc 1.5m wide for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil complete all as specified & as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & as directed.
Removing excavated soil material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified & as directed.
S&F for laying in trenches, jointing and testing salt glazed stoneware pipe grade 'A' drainpipe 150mm bore conforming to IS at any depth after they are laid and tested complete all as specified & directed.
M&L for PCC 1:3:6 type C2 as in concrete bed to 150 mm bore drain pipe and over incl packing under haunching against the sides of pipes after pipe laid and tested complete all as specified & as directed.
Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc
T/D old unserviceable c/fan regulator any type
T/D old unserviceable call bell any type
T/D old unserviceable submain wiring any size 4/6 Sq mm 02 run copper conductor single phase with earth wire including PVC conduit
T/D old unserviceable FTL /bulk head/security light etc light fitting any type ant sketch
T/D old unserviceable MCB DBs any type SPN/TPN incl MCBs
M & L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) all as specified and directed by Engineer-in-Charge for the following :- (Note : for modular switch/sockets/bell push etc modular sheet metal enclosure and cover plate will be considered seperatly):-
One light /Fan/Bell point controlled by one switch 6/5 Amp one way single pole.
One 3 pin 6/5 Amp socket outlet controlled by one switch same board.
One 3 pin 6/5 Amp socket outlet controlled by one switch independent board.
One light point controlled by two 2-way switches, with cables 1.5 sq. mm size
All as per item No 2 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.
S & F Modular switch 1 way 6/10A, 1 module (ISI marked), 240 Volts complete all as specified and as directed by EIC.
S&F Modular switch 2 way 6A, 1 module (ISI marked), 240 Volts complete all as specified and as directed by EIC.
S & F Modular switch 1 way 16A, 1 module (ISI marked), 240 Volts including complete all as specified and as directed by EIC.
S&F modular Socket, 6A - 2/3 pin combined 2 module, socket outlet 3 pin, 6 Amp complete all as specified and as directed by EIC.
S&F modular Socket, 6/16A - 2/3 pin combined 2 module, socket outlet, complete all as specified and as directed by EIC.
S&F modular bell push 6/10 Amps SP flush type, 1 module complete all as specified and as directed by EIC.
Supply & Fixing modular type 2 module medium step type fan regulator , 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directedby EIC.
Supply and fixing TV socket single module modular type complete all as specified and directed by EIC.
Supply and fixing Tel socket with sutter single modular type complete all as specified and directed by EIC.
S & F White cover plate with frame,1 module
S & F White cover plate with frame,2 module
S & F White cover plate with frame,3 module
S & F White cover plate with frame,4 module
S & F White cover plate with frame,6 module
S & F White cover plate with frame,8 module
Metal flush box 1/2 module
Metal flush box 3 module
Metal flush box 4 module
Metal flush box6/8 module
S&F ceiling rose, surface bakelite, 65mm dia, two to three terminals complete all as specified and as directed by EIC.
S&F for batten angle lamp holder insulated body with back plate suitable for batten fittings including complete all as specified and as directed by EIC.
S&F Ding dong sound door call bell electric AC 240 volt, 50 Hz ding dong type i all as specified and as directed by EIC.
Supplied and fixing PVC conduit by Non Metallic Rigid PVC conduit, ISI Marked medium grade of size 25 mm dia including all fittings like bends, elbow reducer, junction boxes, tee bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including Cutting & Chasing required on brick wall not exceeding 10 CM girth for concealed conduit wiring and making good to disturbed surface with cement mortar 1:3 complete all as specified and directed by EIC.
M & L for sub main wiring with four run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 10.0 Sqmm, 1100 Volts grade and two run of 10.00 Sqmm FRLS PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments incl PVC conduit and drawing in PVC rigid conduit 32 mm dia, connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1. four run of single core cable with two run of contineous earth wire of copper conductor wire Flexible (Multistrand) of FRLS PVC insulated and PVC condute 25/32 mm shall be measured and paid as one unit length.
M & L for sub main wiring with two run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 4.0 Sqmm, 1100 Volts grade and one run of 4.0 Sqmm FRLS PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments including PVC conduit and draw in PVC rigid conduit 25 mm dia , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire flexible (Multistrand) of FRLS PVC insulated and PVC conduit 25 mm dia shall be measured and paid as one unit length
Supply & Fixing SPN Distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, complete all as specified and directed by EIC.
Supply & Fixing MCB SPN, 40 to 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed by EIC.
Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed by EIC.
Supply and fixing MCCB 4 pole , 160 Amps 415 volts, AC , 36 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed by EIC.
Supply and fixing MCB TPN, 63 Amps 415 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed by EIC.
Supply and fixing MCB TP, 63 Amps 415 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed by EIC.
Supply & fixing in replacement of AC box by modular type enclosure with 4 module 25 Amps socket and 25 Amps plug single pole and neutral fitted with two pin and earth plug and socket complete with , 240 volt, 25 Amps ,power unit of suitable rating complete all as specified and directedby EIC.
Supply and fixing TPN Distribution Box double door of protection grade IP 42, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way,vertical incl provide the fixing arranegement of MCCB 4 pole 125 Amps as incomer including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed by EIC.
Supply and fixing TPN Distribution Box double door of protection grade IP 42, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.
S&F Wall mounted LED batten 18/20 Watt with 01 No LED tube rod, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed by EIC.
S&F Wall mounted Mirror light LED fitting, 10 Watt, 2 Feet long incl integrated electronic driver complete all as specified and directed by EIC.
S&F decorative wall mounnted luminaire with & including 09 watt LED lamp complete as directed and specified by EIC.
S&F LED building security light 35 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed by EIC.
Supply only LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min)
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size
Taking down existing ceiling fan serviceable type and deposite MES safe coustedy all as directed by EIC.
Refixing of existing serviceable ceiling fan any size at after collection from MES store yard and refixing in same position after servicing oiling, greasing and incl replacement of spares such as rubber reel cotter pin, split and painting of ceiling fan motor and blades along with new connection wire 3 core and new clamp properly all as directed by EIC.
Taking down existing Exhaust fan serviceable type and deposite to MES for safe coustedy all as directed by EIC.
Refixing of Serviceable /repairedble fan any size after collecting from MES store yard, servicing/greasing and refixing in same position after replacement of minor spares i.e. capacitor, fasteners including replacement of new 3 core flexible wire and providing new MS louvers shackle etc complete all as directed by EIC.
Supply and fixing ceiling fan BLDC motor ("Brushless direct current motor") complete with blades down rod, and accessories 230 V, 1200 mm sweep, min air delivery not less than 210 cubic meter per min, B star rating 5, power consumption not more than 35W, RPM not less than 340 complete all as specified and directed.
Supply & fix exhaust fans/ventilating fan AC single phase 230/ 240 V of size 250 mm sweep RPM not less than 1100, air delivery not less than 720 cubic meter per hour, power consumption not more than 45 Watts with louver including cutting of hole of adequate size including making good existing disturbed surfaces incl fixing with MS fasteners complete all as specified and directed by EIC.
Supply & fix wall mounted fan 230 volts single phase oscillating 400 mm sweep suitable for wall mounting incl connection and fixing arrangement all as specified and directed by EIC.
Taking down of existing unserviceable geyser any size from MES store yard all as directed by EIC.
Supply & fix Electric Storage water heater of capacity 25 Ltr , 230 V having BEE start rating not less than 5 complete with PTMT nuts, PVC washers, fastner etc all as specified and directed at site by EIC.
Taking down Old unserviceable rusted earthing plates
Taking down old unserviceable / defective energy meter any type any capacity and deposite to MES E/M store all as specified and directed by EIC.
Supply & fix AC Three phase static energy meter of accuracy class 1.0, 3 X 240 V, 50 Hz with Backlit LCD display of rating 10 - 60 A (suitable for measurement of KWH only) with special features like TOD, temper logging, optical communication port display in absence of power alongwith transparent hinge type PVC meter box including connection with thimble , PVC flexible pipe and proper sealing all as specified and directed by EIC.
M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).
Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp and GI pipe with fixing arrangement complete
Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm x 3.5 Core with required aluminium cable lugs all as specified and directed by EIC.
Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm x 2 Core with required aluminium cable lugs all as specified and directed by EIC.
S&F steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for connection and tapping from existing supply pipe lines to resume water supply complete all as specified and as directed for 25 mm bore size pipe (Note - Excavation and PCC work will be measured and paid separately.
Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25 mm bore.
M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose
M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed by EIC.
Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 50 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.
M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1 complete all as specified and directed by EIC.
Taking out existing worn out/old PVC insulated cable of up to size 50 sqmm any type of 1100 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES compitent staff complete in all respect and as directed at site by EIC.
JINDAL BUILDERS
MAHADEV ENTERPRISES
DAVINDER SINGH
S K CONSTRUCTION
M/S SANJAY STEEL WORKS
PARAS RAM ASGOTRA AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .