PROVN OF STORE ROOM FOR 148 LT AD REGT PU MAGNUM ROOF TREATMENT OF BLDG NO P 320 P 321 AT MEERUT UNDER AGE BR I AGE EM I OF GE NORTH MEERUT CANTT

Amount

Surface excavation in soft/loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth in soft/ loose soil for foundation etc or for shaft, wells, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out and leveling of bottom surface to required level complete all as specified and as directed.

Removing excavated material ( spoil ) not exceeding 50 metre distance and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Returning, filling in including spreading, leveling watering and well ramming of soft / loose soil in layers not exceeding 25cm thick each complete all as specified and as directed.

S&F precast cement concrete block masonry 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed

M&L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates), in foundations, filling and mass concrete complete all as specified and as directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab, floor slabs, landing, chajjas and similar work not exceeding 200mm thick flat fair finished surfaces of concrete flat complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and as directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 10.00 here-in-before but 6mm to 8mm dia complete all as specified and as directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like complete all as specified and as directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and as directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in chajjas complete all as specified and as directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate) as in cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves or similar works set & jointed in cement mortar 1:4 complete all as specified and as directed.

M &L for Brickwork with fly ash old size bricks straight or curved on plan exceeding 6m mean radius built in Cement mortar 1:6 complete all as specified and as directed.

M & L 15 mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified and as directed.

M & L for applying 15 mm thick rendering using ready mix plaster bags in cement mortar 1:4 on brick / concrete surfaces of external walls finished even and fair, using water proofing compound 200ml per bag of cement or as per manufacturer instructions, complete all as specified and as directed. Note:- (i) Water proofing compound shall be measured and paid separately as supply only. (ii) Contractor shall deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of Date of Commencement

Supply only liquid water proofing compound complete all as specified and as directed.

M&L Rendering 5mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and as directed.

M&L for preparing of new surfaces of walls and applying one coat of primer using roller complete all as specified and as directed.

M&L for applying Two coat of oil bound distamper using roller for painting complete all as specified and as directed.

M& L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and as directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 Sqm over new surfaces using roller for painting complete all as specified and as directed.

M&L laying for hardcore of broken brick of burnt clay bricks (well graded) bricks of gauge not exceeding 63 mm, deposited spreaded, leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L 75 mm thick cement concrete 1:4:8 type C-2 using (40 mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) for Sub base complete all as specified and as directed.

M&L machine cut prepolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and mirror / granite polishing complete over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per item No 31.00 here-in-before but factory made bull nosed as in riser of steps, skirting / dados laid over 10mm thick in cement mortar 1:4 complete all as specified and as directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 85x45 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg / Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed.

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg / Cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and as directed.

S&F factory made steel windows with side hung shutter including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and as directed.

M&L for 3mm thick figured glass, pin headed type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed.

Supply & fix 150 mm size aluminium alloy handles cast type anodized complete all as specified and as directed.

S&F aluminium anodised tower bolts 150mm long, of extruded section complete all as specified and as directed.

S&F aluminium sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F stainless steel butt hinges 100mm size complete all as specified and as directed.

M&L 50mm thick PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement complete all as specified and as directed.

M&L 10mm thick cement paster in cement mortar 1:4 mixed with WPC 200ml per bag of cement or as per manufacturers instruction finised even and smooth without using extra cement on roof surface when concreate is green and wall complete all as specified and as directed. Note : Waterproofing compound shall be measured and paid seperately as "Supply only".

Material & labour for surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It shall be made free of any sharp objects. Cleaning of PCC shall be done with wire brushing to attain smooth leveled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar and dried for 72 hours before laying the liquid applied membrane. Grout: Providing Chemical injection treatment in the form of pressure grouting to the construction joint and cracked portion at 1m centre to centre by injecting cement slurry mixed with dual shrinkage compensated cementations grout Injection grout additive, in the required consistency through the pre fixed PVC nozzles in the 18 mm dia holes, fixing of PVC nozzles with instant setting cement. Angle fillets / Coving: Providing and making of fillet, 50mm x 50mm on sharp corner of terrace with cement sand polymer mortar (add “multipurpose mortar”, 10% by weightofcement). First apply the bonding coat of Multi-Purpose Polymer 5-10% diluted in water and add to cement slurry. Apply the bonding slurry and apply the polymer mortar over the sharp edges. (Contd to... 45.01)

(Contd from... 45.00) Treatment of pipe entry points: Preparing the inside surface of core and PVC /MS Pipe by roughening using suitable Sand paper to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Packing the gap using free flow able non shrink cement polymer based grout up to the surface of the bore while the bonding agent is in tacky state. the periphery of PVC pipe should be sealed with Hybrid PU Sealant or dual shrinkage compensated Micro concrete. Application of Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3 (Resin:Hardner) Supplying, providing and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt. Notes :- (i) Grouting shall be done when and where ever required. (II) Contractor shall deposit 100% CA quantity to the Engr-in-Charge, within 15 days of Date of commencement of work.

M&L for Antitermite treatment of the soil under plinth protection at the rate of 5 litres of emultion per square meter of surfaces area complete all as specified and as directed.

M&L injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas, wall junction parapet etc at any height by necessary demolition of brick work etc if required and making good distrubed surfaces to match with existing finishes with and including material and labour for rendering in cement mortar 1:4 mixed with WPC / PCC in 1:3:6 type C-2 / brick work in cement mortar 1:4 wherever as required at site complete all as specified and as directed.

Taking down old existing water proofing treatment from top of RCC / arch slab including taking down of concrete padding or plaster and raking out joints of arch slab and hacking the top of RCC slab, cleaning with water and dispose off rubbish upto 200 meter complete all as specified and directed

M&L for 50mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregates) as on roof surface complete all as specified and as directed

Dismantling PVC / RCC OH water tank of capacity exceeding 500 ltr but not exceeding 1000 liter and removing from site complete all as sepcified and as directed.

Supplied, hoisted and fixed in position rotational moulded polyethylence water storage tanks (triple layered & white in color) IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity complete all as specified and directed.

S&F in repair ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and of 20 mm bore and fixed complete all as specified and directed.

Taking up or down GI water tubing 25mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and as directed

Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and as directed

Fixing only old steel tubing 25mm dia of bore and connections in new or old position (Walls, ceiling, floors, etc.) including provision of new fittings complete all as specified and directed.

Fixing only old steel tubing 20mm dia of bore and connections in new or old position (Walls, ceiling, floors, etc.) including provision of new fittings complete all as specified and directed.

S&F CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on wall / ceiling or laying in floor complete all as specified and as directed

S&F CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on wall / ceiling or laying in floor complete all as specified and as directed

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".

M&L for point wiring for One light/exhaust/ fan point controlled by one, one way switches 5/6 Amps. with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FR cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and as directed.

All as per Srl item No 61.00 here-in-before but One 3 pin 5/6 Amps socket outlet point on same board, controlled by one, one way 5/6 Amps switch complete all as specified and as directed

All as per Srl item No 61.00 here-in-before but One 3 pin 5/6 Amps socket outlet point on independent board, controlled by one, one way 5/6 Amps switch complete all as specified and as directed

All as per Srl item No 61.00 here-in-before but One 3 pin socket outlet, 15/16 amps, with cables 2.5 Sqmm size on independent board, controlled by one, one way 15/16 amp switch complete all as specified and as directed

S&F Switch piano flush button single pole one way 5 amp complete all as specified and as directed

S&F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and as directed

S&F Switch piano flush button single pole one way 15 amp complete all as specified and as directed

S&F Socket outlet 3 pin, 15 Amp, flush type complete all as specified and as directed

S&F ceiling rose, surface type, Bakelite, 65 x 50 mm, three terminal complete all as specified and as directed

S&F ceiling fan complete with three blade, down rod, accessories 230V, 1200mm sweep complete all as specified and as directed

S&F lamp holder insulated body with back plate fix done anodised 100 x 100 mm pressed steel box flush to the wall with 3 mm thick backlight cover complete all as specified and as directed

S&F LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified and as directed

S&F Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and as directed

S&F LED lamp 9 W 6500k,240V complete all as specified and as directed

S&F Exhaust fan steel body AC single phase 230/240V size 300 mm sweep with blades, and louvers complete all as specified and as directed

Supply & laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area of 16 Sqmm 2 core complete all as specified and as directed

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose

M&L for fly ash brick protection length of brick shall be laid across the length of cable) complete all as specified and as directed

GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall / pole complete all as specified and as directed

S&F MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and as directed

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and as directed

S&F Isolator SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in complete all as specified and as directed

M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead white 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point or indicated including testing on completion complete all as specified and as directed

Arun Construction Co.

High Tech Metal India

vibha associates

Rajneesh Jain

Manglam Engineers and Construction Co

M/S AMAR ELEKTRO CENTRE

Shri Kanchan Engineers