REPAIR TO WOODEN FURNITURE, REPAIR AND RECANNING OF VARIOUS TYPES OF WOODEN CHAIR VARANDAH AND CERTAIN REPAIR TO CHARPOY GI PIPE AT MIL STN SGNR

Amount

Taking down un-serviceable plastic cane and re-canning with new 2mm wide half round plastic cane except that of border which shall be 4 mm flat superior quality cream / white colour and weaving in accordance to Godrej pattern as shown on DRG NO.FD-03(M),FD-279,FD-229,FD-280 and as applicable complete all as specified and directed by Engineer – in - Charge.

Taking down un-serviceable plastic cane and re-canning/ re-weaving with 4mm wide flat plastic cane as shown on DRG NO.FD-19(M),FD-359, FD-256 for chair verandah complete all as specified and directed by Engineer – in - Charge.

M & L for 3mm thick gas welding to mild steel tubing 19/20mm dia broken leg / frame of chair verandah as shown on DRG NO.FD-19(M),FD-359, FD-256 complete all as specified and directed by Engineer – in - Charge.

M & L for preparation of old painted steel surfaces of chair verandah and applying one coat of synthetic enamel paint (As per existing colour) complete all as specified and directed by Engineer – in - Charge.DRG NO. FD-19(M),FD-359, FD-256

S & F in replacement PVC shoe of best quality complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-19(M),FD-359, FD-256

S&F in replacement 10 mm dia mild steel round bar of chair verandah as per existing design complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-19(M) FD-359,FD-256

S&F in replacement Front leg of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225, FD-285

S&F in replacement Rear leg of chair wooden using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285

S&F in replacement Front rail/back rail/side rail of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285

S&F in replacement Stiffner of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-16,FD-56, FD-225,FD-285

S&F in replacement back rest of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285

S&F in replacement Seat (Made out of BWR plywood commercial type 6 mm thick ISI marked) of chair wooden Bottomcomplete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285

M & L for preparing of all exposed wooden or wood based surfaces of chair wooden without arms and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge DRG NO.FD-56,FD-285

S&F in replacement Front leg of chair dining using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-279,FD-16

S&F in replacement Rear leg of chair dining using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-279,FD-16

S&F in replacement Front rail/back rail/side rail of chair dining using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-279,FD-16

S&F in replacement back rest of chair dining using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-279,FD-16

S&F in replacement stiffener of chair dining using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-279,FD-16

M & L for preparing of all exposed wooden or wood based surfaces of chair dining and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-16,FD-228,FD-279

S&F in replacement Front leg of chair writing using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280

S&F in replacement Rear leg of chair writing using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-250,FD-280

S&F in replacement Front rail/back rail/side rail of chair writing using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280

S&F in replacement Back rest of chair writing using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280

S&F in replacement Stiffener of chair writing using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-250,FD-280

M & L for preparing of all exposed wooden or wood based surfaces of chair writing and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280

S&F in replacement Front leg of chair easy using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201

S&F in replacement Rear leg of chair easy using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201

S&F in replacement Arms of chair easy using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201

S&F in replacement Rail of seat frame of chair easy using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201

S&F in replacement Rail of back frame of chair easy using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201

M & L for preparing of all exposed wooden or wood based surfaces of chair easy and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-229,FD-201

S & F in replacement triangular shape corner 100mm x 100mm x 25mm thick made out of 1st class hard wood in all types of wooden chairs complete all as specified and directed by Engineer – in - Charge DRG NO. FD-03(M) FD-279.FD-229,FD-280

S&F in replacement Cushion (50mm thick of 32 denasity) with tepastry cloth cover as per existing design of Stool dressing cushioned complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-282&TP Note:- Tapestry cloth shall be of superior cloth of costing not less than Rs 275 per meter with 1.25 meter width as apptoved by BSO

S&F in replacement leg of Stool dressing cushioned using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-282&TP

S&F in replacement Front rail of Stool dressing cushioned using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-282&TP

S&F in replacement Side Rail of Stool dressing cushioned using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-282&TP

M & L for preparing of all exposed wooden or wood based surfaces of stool dressing cushioned and applying two coats of Melamine polish complete all as specified and directed by Engineer-in-Charge.DRG NO. FD-282&TP,FDE6/MAP/14

S&F in replacement Top of table, (size 1520mm x 860mm x 760mm) made out of 18 mm thick prelaminated particle board ISI marked with 4 mm thick TW beading alround, complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-139(M)

S&F in replacement leg of table, (size 1520mmx860mm x760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-139(M)

S&F in replacement Long rail of table, (size 1520mmx 860mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-139(M)

S&F in replacement short rail of table, ( size 1520mmx860mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-139(M)

S&F in replacement stiffener of table, (size 1520mmx860mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-139(M)

S&F in replacement PVC handle with two Nos of nuts and bolts as per existing design of chair writing MAP/Chairconference/ chair visitor complete all as specified and directed by Engineer – in - Charge.DRG NO. FD/E6/MAP/12&TP

S&F in replacement seat cushion 50 mm thick of 32 density with Tapestry Cloth cover of chair writing MAP/Chair conference/ chair visitor complete all as specified and directed by Engineer – in - Charge.DRG NO.FD/E6/MAP/12&TP. Note : Tapestry cloth should not be not less than the rate of Rs 275/- per mtr , Sample of cloth should be approved by BSO/GE

S&F in replacement back cushion of chair writing MAP/Chairconference/ chair visitor complete all as specified & directed by Engineer-in-Charge.DRG NO. FD-282&TP,FDE6/MAP

S&F in replacement Top of table dining, (size 1200mm x 900mm x 760mm) made out of 18 mm thick prelaminated particle board ISI marked with 4mm thick TW beading alround complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273

S&F in replacement leg of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273

S&F in replacement Long rail of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273

S&F in replacement Short rail of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273

S&F in replacement ply wood top from Charpoy GI pipe 32 mm bore with new ply wood 12 mm thick 7 ply BWR Grade ISI marked fixing with nuts & bolts as per existing size and shape complete all as specified and directed by Engineer - in - Charge. DRG NO. FD-220

Assembling / tightening of loose socket of charpoy frames with minor repairs complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement galvanized iron elbow (ISI marked) suitable for 32mm bore galvanized iron pipe of Charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement galvanized iron check nut 6mm thick (ISI marked) suitable for 32mm bore galvanized iron pipe of Charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement long rail made out of galvanized iron pipe 32mm bore medium grade ISI marked and fixing duly threaded / welded to galvanized iron pipe of charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement short rail made out of 32mm bore galvanized iron pipe long rail obtained from long rail and fixing duly threaded/welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement leg made out of 32mm bore galvanized iron pipe long rail obtained from short rail and fixing duly threaded/welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

M & L for welding broken / cracked joints of charpoy galvanized iron pipe 32mm bore (i.e. short rail, long rail, leg etc.) upto 32mm dia x 3mm thick by gas welding as per existing design complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement 25 x 3mm flat iron clamp including joint Pati 02 Nos within charpoy with washer made to shape as per existing design and welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement seat and back low plast of chairs school with hand board all as specified and shown on drawing and directed by Engineer-in-Charge. DRG NO. FD/E6/MAP/05

S&F in replacement hand board of chair school made out of 18 mm prelaminated partical board Top openable PVC edging screwed to 25 mm dia holow steel pipe inserted in 20 mmdia MS Rod welded to frame all as specified and shown on drawing and directed by Engineer-in-Charge. DRG NO. FD/E6/MAP/05

M&L for welding broken/craked joints of chair school by Gas welding as per existing design complete all as specified and directed by Engineer-in-Charge.DRG NO. FD/E6/MAP/05

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

THAKURJI ENTERPRISES (BID ID -3072187)

JAIN TRADERS (BID ID -3058819)

vardhman traders (BID ID -3062811)