CERTAIN REPAIR TO FLOORING, PLASTERING, JOINERY AND OTHER MISC MAINT B/R AND E/M WORK AT DOMESTIC AREA UNDER AOR OF GE (AF) SRINAGAR.

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge

Dismantling wall and ceiling boards, fibre pulp insulation etc or insulation boards/slabs/ blankets, any thickness, including cover fillets, all as specified.

Dismantling of Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitrous china wash hand basin white flat back of size 550 x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands including fixing or supply of waste pipe ,fixed in repairs, all as specified.

S&F GI frame work 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soft it at approx x 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 centre to centre including 4 mm thick Non-asbestos designer fibre cement building board in grid complete all as specified and directed by Engr-in-Charge.

M&L Providing and fixing Gypsum Board 12.5 mm thick (water proof) in ceiling fixed with screw or as per manufacturers instructions including 2 coats of OBD complete all as specified and directed by Engr-in-Charge.

S&F 0.63mm thick, Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with fixed with L-type or J-type or cranked hook and washers, in roofs etc. with grade of zinc coating 275 all as specified and as directed by Engineer-in-charge

S&F 0.63 mm thick, Galvanised, plain mild steel sheeting fixed with fixed with L-type or J-type or cranked hook and washers, in roofs for ridge etc. with grade of zinc coating 275 all as specified and as directed by Engineer-in-charge

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & direted

Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth using integral water proofing compound complete all as specified and as directed by Engineer-in-Charge. (WPC shall be measured and paid seperately)

Rendering 15 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement ccomplete all as specified & direted

Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces as in ceiling, including finishing the surface even and smooth without using extra cement complete all as specified & direted.

Supply only integral water proofing compound, complete all as specified & direted

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each ,complete all as specified.

All as per above srl item No 14 but area exceeding 1.5 sqm and not exceeding 4.00 sqm each, complete all as specified & direted.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge

Re-fixing shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.

S&F Pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar, thickness of sheet 1.25mm and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.

S&F Pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.

S&F 35mm thick, 2nd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & as directed by Engineer-in-Charge.

S&F 30 mm thick, 2nd class hard wood, glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete.

S&F in repair Hasp and staple, 100 mm size, ISI marked safety type, of aluminium anodised with mild steel hinge pin including bolts to hinge plate, fixed with screws complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Aluminium handles cast type anodised of size 125mm long ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 2nd class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimetres each complete all as specified and as directed by Engineer-in-Charge.

S&F Box Type Steel windows withtubular frame side hung shutters including projecting type hinges with steel handle, 100mm long and steel peg stay, complete with glazing and gauged pannel and guard bars, dovetailed or welded including one coat of red oxide zinc crome primer & PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate for embedding of holdfast, complete all as specified & directed by Engr-in-Charge with ref to Dwg No CESZ/TD/1018/2011.

S&F Box type steel ventilators with bottom hung or top hung shutters with glazing/gauged pannels with guard bars, including hinges, steel side arms or peg stays and locking arrangements, complete all as specified & directed by Engr-in-Charge.

S&F Mild steel framed work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts and including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as specified and directed by Engineer-in-Charge.

S&F Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads not exceeding 1.5 Sqm complete all as specified and as directed by Engineer-in-Charge.

S&F 03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 03 mm thick sheet glass, figured glass (Frosted), pin head type and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 15mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

All as per above item No.37 but 20 mm bore. Note : srl item Nos 37 & 38 here in before: GI tubes and fittings shall be I.S.I marked.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge.

S&F Bib taps, chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule, for 15mm bore dia of pipe , supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 20 mm, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and as directed by Engineer-in-Charge

S&F in repairs Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

S&F CP Swivel shower roses with or without swivel joints, any size, including fixing to steel pipe or union fixed in repairs. (minimum weight 40 gms) all as specified.

S&F in repairs 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.

M&L for 50 mm thick 75 cm wide PCC type C-1 1:3:6 (using 20mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.

S&F Vitreous china squatting pan, orrisa pattern, of size 580x440mm, white with integral foot rest with P or S trap including provision of cement concrete bedding (excluding flushing cistern and flush pipe) but including, making connections and demolition of concrete/lime concrete bedding for taking out existing broken squat pan complete all as directed at site.

S&F PVC low level flushing cistern, valveless, syphonic action type, double push botton, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32mm dia of required length and making connection complete including taking down by dismantling the existing unserviceable cistern of any description, complete all as specified.

M&L for 40mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the top surface even and smooth, without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for Glass dividing strips, 3 mm thick, 38 mm wide, fixed in position complete all as specified.

M&L for Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work of thickness 19 mm thick complete all as specified.

Extra over rates of block board 19 mm or veneered particle board for external teak wood lipping, 6 mm thick fixed with nails all as specified.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.

S&F in repair 25mm Dia Curtain rail, anodised aluminium alloy chromium plated, fixed with bracket and end caps etc including taking down of existing curtain rail, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and as directed by Engineer-in-Charge

Preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge

Preparaing old surface (plastered or unplastered) by Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper on walls,complete all as specified and as directed by Engineer-in-charge

Preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over coat of chalk whiting complete all as specified and as directed by Engineer-in-Charge.

Preparaing old surface (plastered or unplastered) by Washing, rubbing down and stopping of painted surfaces of walls and applying one coat of cement base paint complete all as specified and as directed by Engineer-in-Charge

Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Preparation of old painted wood and wooden base surfaces of any description over 10 cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

Preparation of old painted steel surfaces of any description exc 10 cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, fancy type with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stainless steel plate rack made of 0.8mm thick sheet, including connecting to walls with PVC gutties and screws of suitable sizes, overall size 760x910x250mm having partitions complete all as specified & directed by Engineer-in-Charge.

S&F Stainless steel sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 915x460mm with bowl size 410x330x160mm, fixed in repairs, complete all as specified & directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) of Gde BIIA area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

M & L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete including with aluminium tail wrapping all around the outer side of pipe taking down of old lagging if required all as specified and directed by Engineer-in-Charge

M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete with aluminium tail wrapping all around the outer side of pipe including taking down of old lagging if required all as specified and directed by Engineer-in-Charge

M & L for Lagging to pipes 25mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete with aluminium tail wrapping all around the outer side of pipe including taking down of old lagging if required all as specified and directed by Engineer-in-Charge

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified.

S&F in repair Grating doom 100mm dia of CP (Minimum weight 25gms) complete all as specified.

S&F in repair Grating doom 125 mm dia with waste hole of CP (Minimum weight 40gms) complete all as specified.

Supply only, PVC waste pipe for 32mm bore pipe complete all as specified and directed by Engineer in Charge.

S&F CP Health faucet fixed with spring action and lever along with Flexible shower hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.

S&F CP Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed , Complete all as specified and directed by Engineer-in-Charge.

S&F Toilet paper holder cast copper alloy chromium plated fixed to walls with chromium plated brass screws, complete all as specified and as direted by the Engr-in-Charge

S&F PVC seat cover for EWC colour white incl hinges, complete all as specified and as direted by the Engr-in-Charge.

S&F brass/CP face/ spindle for Taps, stop cocks, pillar taps, CP mixer etc, complete all as specified and as direted by the Engr-in-Charge

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer in Charge.

S&F Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down of existing tank, complete all as specified and as directed by Engineer-in-Charge.

All as per above Item No 89 above but of 1000Ltr capacity.

Taking down copper/aluminium point wiring (light,fan,socket & power) complete incl fixtures and fittings such as switches,ceiling rose,pendent holders,regulators,sockets,light fitting etc and making good disturbed surface of wall,floor etc complete as specified and directed.

M&L Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

(a) One light/fan point controlled by one way switch 6 amps 240 volts

(b) One 3 pin 6 Amps switch socket outlet point on independent Board

(c) One 3 pin 6 Amps switch socket outlet point on same board

M&L Point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets 16 Amps, 240 volts . complete all as specified and as directed . Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

S&F modular one way switch 6 Amp 240 volt marked light/fan suitable for one model etc complete as specified and directed. Make- Legrand/ ABB/ Havells or equivalent approved by GE

S&F Modular 6 Amp 5 pin universal socket suitable for two model , 250 volts complete all as specified and directed by Engr-in-charge. Make Legrand/ABB/ Havells or equivalent approved by GE

S&F modular switch one way 16 Amps 240 volts suitable for one model complete as specified and directed by Engr-in-charge. Make- Legrand/ ABB/ Havells or equivalent approved by GE

S&F Modular 6/16 Amp socket suitable for two model , 250 volts complete all as specified and directed by Engr-in-charge. Make Legrand/ ABB/ Havells or equivalent approved by GE

M&L for ceiling rose with three terminal as per relevant IS complete as specified and directed . Make:- SSK/havells/legrand /ABB

Lamp holder pvc/polycarbonate type with back plate suitable for batten fitting in and including 10 watt LED lamp etc complete all as specified and directed . Make Legrand/ ABB/ Havells or equivalent approved by GE

S&F decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 20 watt luminaire all as specified & approved by EIC .Make:- CG C&S ,Havells ,Crompton equivalent approved by GE

S&F decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 10 watt luminaire all as specified & approved by EIC .Make:- CG C&S ,Havells ,Crompton equivalent approved by GE

M&Lfor sub main wiring with two single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor FRLS cable drawn into and including suitable size non metalic rigid pvc conduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor FRLS cable as earth wire of the following size complete all as directed & specified.

(a ) 2x6.0 sqmm + 1x4.0 sqmm earth wire

Disconnecting all water and electric connections of geysers and taking down carefully installed storage type electric geysers of any capacity of any make/type/size (horizontal/vertical) lowering and setting aside opening geysers examining and checking thoroughly for requisite repair/ replacement of defective/worn-out/ unserviceable components/parts materials including preparing inventory for each geyser separately in presence of Engineer-in-Charge and removing all scale and dirt de-scaling of deposited in inner copper tank and outer tank and heating elements by HCL or aqua clear pedilite solution, thermostat, indicator lamp, assemble checking electrical connection, stopping of minor leaking by soldering/brazing of the inner copper tank and replacement of defective worn out unserviceable components/parts and painting of geyser 50 ltrs after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with ammery paper for painting with one coat of duco paint by spray painting mation to achieve glossy finish of approved make first quality and re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2cm high ) & re-fixing geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge including the replacement of the following items etc complete all as specified & directed.

(a) Supply only Fiber reinforced PVC nylon pipe heavy duty size 450 mm long 15mm bore with brass coupling chromium plated with rubber washers as both ends as per IS.-01 Nos (b) Supply only Flexible chromium plated connection pipe size 450 mm long 15 mm bore with brass chromium plates coupling suitable for geyser any capacity-01 Nos

Taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blade frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts in its original location and hanging connecting and testing ceiling fan for smooth functioning incl replacement of rubber real insulator,split pin,nut,bolt, washer, 3 core flexible cable from connector to ceiling rose, and painting with one coat of synthetic enamel paint with spray painting machine & marking MES No. with black paint complete all specified & directed.

Taking down carefully exhaust fan any sweep and make, dismantling of blades, frame and opening and examining fan motor, cleaning of dust/.dirt of fan, cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively, including applying synthetic enamel paint to achieve glossy finish approved coloured as directed by Engineer-in-Charge and marking MES No with black paint and reassembling of complete fan and re-fixing in its original location making connection with replacement of rubber real insulator,split pin,nut,bolt, washer, 3 core flexible cable from connector to ceiling rose and testing to the entire satisfaction of Engineer-in-Charge complete all specified & directed.

M/S Abdul Ahad Rather

M/S M.R. Construction

NAJAR ENTERPRISES

M/S WANI AND SONS

M/S maqsood enterprises

M/S TARIQ AHMAD SHEIKH

M/S SS SODHI ENTERPRISES

M/S Thakur & Sons