89 H(F)(W)/2022-23

Amount

The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 20 Km.)

ST Pole 11 Mtr. long

PCC Pole 8.5 Mtr. long

ACSR Weasel Conductor

Cable LT ABC 3x120+1x95+1x16 sqmm

Armoured L.T. Cable 3.5x400 sq mm

Armoured L.T. Cable 3.5x240 sq mm

Armoured L.T. Cable 3.5x120 sq mm

Armoured L.T. Cable 2x10 sq mm

Other Line material i.e. cross arm / conductor / pin insulator / stay / earthing/cable Box etc. except A.B Cable.

Dragging of PCC/ST Pole as per RESPO Norms.

Fabrication and Erection of Single Pole Support on PCC/ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Stringing, Sagging, binding and jumpering of ACSR Weasel as per RESSPO Norms

Stringing, Sagging, binding and jumpering of AB Cable Size (3x120+1x95+1x16) as per RESSPO Norms

Construction of Plinth of Transformer Size 2x2x1.5 Mtr including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

ERP Fencing of Transformer Plinth With Installation (all the material will be supplied by the contractor.)

Laying of underground Cable by HDD (HORIZONTAL DRILL DIRECTION) Method by using suitable HDPE Pipe & HDD Machine Complete in all Respect as per norms. (All the material will be supplied by the contractor .

Supply and Installation of LT Cable lug 400 sqmm & Glland

Supply and Installation of LT Cable lug 240 sqmm & Glland

Supply and Installation of LT Cable lug 120 sqmm & Glland

Supply and Installation of G.I. Pipe 6'' dia

Supply & laying of HDPE Pipe

Construction of Plinth of Pannel including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coa (All the material will be supplied by the contractor .

Boaring type Earthing Complete of Pannel (All the material will be supplied by the contractor .

Laying of Armoured L.T. Cable 3.5x400 sq mm Double Circuit

Laying of Armoured L.T. Cable 3.5x240 sq mm Double Circuit

Laying of Armoured L.T. Cable 3.5x120 sq mm Double Circuit

Laying of Armoured L.T. Cable 2x10 sq mm

Carrage and Installation Outdoor type LT Distribution Bolt with a rupturing capacity of 50 KW at 415 or H Called for individual Item (CPRI approved manufacture) Openable in front & back suitable for 3 phase, four wire 50 Hz AC Supply & an ambient temparatre of 45 deg. C the Cubicile should be weather proof, dust proof, Bermein proof and incloser protection shall be fabrication out of 40 SWG CRCA Sheet & Provided with 16 swg hinged door including suitable Foundation, Main LT Pannel AT Sub-Station 250 KVA with Plinth Incommer-1 set of 400 amp TP MCCB with Spreader & Extended Handle Metering of Incomer-1 set of digital Ammeter with ASS (A Pannel) 1 Set of Digitel Voltmeter with VSS 1 Set of LED type Phase indication light (22.5 MM) with Control MCB Outgoing - 06 set of 100 amp. TP MCCB with Spreader & Extended handle (2 No.+1 No. Capacitor Pannel)

Carrage & Installation, Testing & Commissioning of outdoor type feeder piller Pannel to be made of 2 mm, CRCA Sheet & Cover will be 1.6 mm CRCA sheet duly powder coated paint including suitable foundation with 300 amp. Aluminim bus Bar ( C Pannel) Incomer 250 amp. TP MCCB 01 No. Outgoing 100 amp TP MCCB 14 No. (B Pannel)

Carrage & Installation, Testing & Commissioning of outdoor type feeder piller Pannel to be made of 2 mm, CRCA Sheet & Cover will be 1.6 mm CRCA sheet duly powder coated paint including suitable foundation with 300 amp. Aluminim bus Bar ( C Pannel)

Rect. Back Iron Scrap from Work site to Store Center

Rect. Old and used AB Cable from Work site to Store Center

Rect. Old and used Pannel from Work site to Store Center

Rect. Back Old and used LT Pole from Work site to Store Center

M/s Shukla Enterprises

M/S BALAJI ENTERPRISES