Dharapuram Municipality Construction of HDPE tank with plate form and Extension of pipe line at ward 12 and ward 17 Javulikadai street in Dharapuram Municipality

Amount

Earth work excavation for foundation in all soils and sub soils to a full depth as may be required except hard rock requiring blasting with an initial lead and lift of 10m and 2m respectively.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labor charges and all incidental charges such as water providing etc., complete as per standard specification

Random rubble masonry in cement motor 1:5 (one Part of cement, Five part of Crushed Stone Sand (M- Sand)) mix using all granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as per standard specification

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 10mm 50% and 12mm 50%size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Plastering with cement mortar 1:5 (One part of Cement and Three part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Brick work in CM 1:5 (one cement & five Crushed stone Sand ) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFTetc complete.

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply and delivery and fixing of HDPE Tank 2000Litres capacity as per IS 12701 / 1996 including loading, unloading, transporation and labour charges for fixng of the GI pipes and specials for pipe connection works including cutting, threading and fixing in position etc., complete

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm all-round covered with 16 gauge MS sheet and kiosk door charges etc.,locking arrangements and labour including cutting, welding, grinding locking arrangement and, labour charges etc., complete

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated cu.conductor of 1100 V grade in 25mm GI pipe,bend and bolt with necessary angle iron up night and end supports for service mains etc., complete Service pipe

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated cu.conductor of 1100 V grade on 7/20 GI bearer wire and reals for service connection main from EB pole to service pipe

Supply and fixing of Miniature circuit breakers 240V/415V 50HZ AC Supply suitable for Both lighting and Motor circuits.All other ISI makes with ISI (std.) /HPL /Havell's /equivalent) Four pole 6A to 32A, 10 KA

Supply and fixing of Fuse Units (Anchor/Equivalent) 32 Amps Porcelain fuse unit (500V)

Supplying Delivery and fixing in position of folling dia GI pipe and specials etc.complete complying with standard specification, as directed by departmental officer etc., complete.

25mm dia GI pipe

25mm dia GI Elbow

25mm dia GI Tee

25mm dia GI Coupling

25mm dia GI Union

25mm dia GI gate valve

Labour charges for Laying of GI pipes and specials to proper line and level including jointing but exluding cost of pipe and jointing materials etc complete (6mm to 32mm)

Supply and delivery of submersible PVC insuleted and sheathed 3 core 2.50mm flat type copper cable confirming to IS694/1990

SAMIYAPPAN N (BID ID -1314502)