PROVN OF LADDERS IN SHAFT AREA AT MAP LINE UNDER GE JAIPUR

Excavation in post holes (or similar holes) in soft/loose type of soil, each n exc 0.5 cum getting out, returning, filling in and ramming earth around, in layers n.exc 25 Cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified.

M&L PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundation of posts and struts complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortar for inserting angle iron or hold fast etc including making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required with Depth of embedded portion measured from the face of the jamb into the wall exc half brick but n excone brick complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in lintel up to 1.5 mtr clear span, cills, steps, seismic and other similar bands, plinth course, string course, lacing course, parapets and railing up to 60cm in height, coping, kneelers, apex stones, bed plates kerb, water troughs, coping of stay/ poles and the like including weathering, slightly rounded or chamfered angles and throating incl necessary formwork complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall & applying applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of approved shade/tint complete all as specified & as directed.

M&L for preparing surface and treating end of posts etc of area exc 01.sqm but n exc 0.5sqm each with tar or coal tar black paint complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.