REPAIR/RENEWAL OF CAPACITOR PANEL, MD CONTROLLER, CONTROL PANEL, CAPACITOR BANK, EARTHING RELAY ASSOCIATED SWITCHGEARS AND ALLIED WORKS UNDER AGE E/M NO 1 OF GE (UTILITY) SECUNDERABAD

Amount

Taking down old unserviceable starter panel board and Supply, Installation, Testing and Commissioning of PDR packaged drive which includes a ACQ580* drive - 100HP with input disconnect switch and fast acting fuses which are IEC60947-3 / IEC60269 complete and a door mounted input disconnect switch (pad lockable in the OFF position), electronic motor overload protection, a door-mounted control panel, with graphical display for local control, provisions for external control connections and serial communications capability (BACnet MS/TP, Modbus RTU and N2 as standard), Intelligent multi-pump control, Sensor less flow calculation, level control, dry run protection complete all as specified and directed by Engr-in-Charge. Make: L&T, ABB, CGL

Taking down old unserviceable starter panel board and Supply, Installation, Testing and Commissioning of PDR packaged drive which includes a ACQ580* drive - 125HP with input disconnect switch and fast acting fuses which are IEC60947-3 / IEC60269 complete and a door mounted input disconnect switch (pad lockable in the OFF position), electronic motor overload protection, a door-mounted control panel, with graphical display for local control, provisions for external control connections and serial communications capability (BACnet MS/TP, Modbus RTU and N2 as standard), Intelligent multi-pump control, Sensorless flow calculation, level control, dry run protection complete all as specified and directed by Engr-in-Charge. Make: L&T, ABB, CGL

Taking down old unserviceable starter panel board and Supply, Installation, Testing and Commissioning of PDR packaged drive which includes a ACQ580* drive - 150HP with input disconnect switch and fast acting fuses which are IEC60947-3 / IEC60269 complete and a door mounted input disconnect switch (pad lockable in the OFF position), electronic motor overload protection, a door-mounted control panel, with graphical display for local control, provisions for external control connections and serial communications capability (BACnet MS/TP, Modbus RTU and N2 as standard), Intelligent multi-pump control, Sensorless flow calculation, level control, dry run protection complete all as specified and directed by Engr-in-Charge. Make: L&T, ABB, CGL

Taking down existing seal setup and Supply , Installation, Testing and Commissioning of Mechanical Seals by modifying the stuffing box in 100HP split casing pump set and retrofitting of mechanical seal (One Seal) for ambient water application of bellow type with complete cartridge and seal faces of C/SIC face combination, secondary seal in viton along with gland plate complete all as specified and directed by Engineer-IN-Charge. Make: Eagle, Burgman, John Crane, Flowserve

Taking down existing seal setup and Supply , Installation, Testing and Commissioning of Mechanical Seals by modifying the stuffing box in 125HP split casing pump set and retrofitting of mechanical seal (One Seal) for ambient water application of bellow type with complete cartridge and seal faces of C/SIC face combination, secondary seal in viton along with gland plate complete als as specified and directed by Engineer-IN-Charge. Make: Eagle, Burgman, John Crane, Flowserve

Taking down existing seal setup and Supply , Installation, Testing and Commissioning of Mechanical Seals by modifying the stuffing box in 150 HP split casing pump set and retrofitting of mechanical seal (One Seal) for ambient water application of bellow type with complete cartridge and seal faces of C/SIC face combination, secondary seal in viton along with gland plate complete als as specified and directed by Engineer-IN-Charge. Make: Eagle, Burgman, John Crane, Flowserve

Supply , Installation, Testing and Commissioning of Mechanical Seals by modifying the stuffing box in 180 HP split casing pump set and retrofitting of mechanical seal (One Seal) for ambient water application of bellow type with complete cartridge and seal faces of C/SIC face combination, secondary seal in viton along with gland plate incl taking down existing seal setup complete als as specified and directed by Engineer-IN-Charge. Make: Eagle, Burgman, John Crane, Flowserve

Taking down old unserviceable starter panel board and Supply, Installation, Testing and Commissioning of CPRI approved LT panel cubical type of suitable size, 415 Volt, factory made dust proof made out of CRCA sheet 3 mm thickness minimum except inner sheath OG 2 mm powder coated, machine pressed, with provision of rubber beading and locking system, including aluminium bus bar of suitable capacity, 4 strip mounted on porcelain insulator, bus bar chamber shall be provided with inspection covers each MCCB/cubical switch shall have be independent opening, panel should be mouthed on angle iron frame and legs (vertical height of legs not less than 30 cm except in PCC) made from angle of size 50x50x6 mm, frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer legs grouted in PCC 1:2:4, type B-2 (using 20 mm graded stone aggregate) complete including all connection/ control wiring with suitable size of copper conductor cable, including danger notice sticker, comprising the following accessory including testing complete all as specified. 1. 250 A TP MCCB - Make: L&T/equivalent, 2. Extended Rotary handle Make: L&T/equivalent, 3. Speaderlinks 3P Make: L&T/equivalent- 2Nos, 4. Multi Function Meter Make: L&T/equivalent, 5. RYB Indicators Make: L&T/equivalent, 6. 6A SP MCB Make: L&T/equivalent- 3Nos, 7. 200/5A, 5VA, CL-1, CT'S Make: L&T/equivalent- 3Nos, 8. 125HP VFD Make: L&T/NIDEC/ABB, 9. RYB Illuminated Push Button, 230VAC Make: L&T/equivalent, 10. Potentiometer Make: L&T/equivalent, 11. Auxiliary Contactor Make: L&T/equivalent, 12. Fan - 6" Make: L&T/equivalent-3Nos, 13. Filter - 6" Make: L&T/equivalent-4Nos, 14. Panel Light Make: L&T/equivalent-1Nos complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable transmitter and Supply, Erection, Testing and Commissioning of ultrasonic level transmitter of Size 300mm in Delivery line of Pump House with the following specification - The electromagnetic flow meter shall be microprocessor based with advance diagnostic capability, with remote capability, output 4-20mA, Supply DC 24V, Measurement range 0.35 to 8 m (13.78 to 314.96 in) , Beam angle (@ -3 dB, full angle): 10°, LST200-LCD: 19 to 30 VDC. Ripple: Maximum 5%, Power consumption, 60 mW to 600 mW, Accuracy and repeatability ±3 mm or 0.25% of full span, whichever is larger, Resolution 1 mm, Update time 2 s, surface should be anti-condensation and cleaning maintenance free complete all as specified and directed by Engr-in-Charge. Make: ABB, Endress Hauser, Krohne Marshall

M/s. A&T Enterprises