Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Rejected-Technical | Rejected-Technical as per recommendation of committee |
Tender Value
Refer Docs
Closing Date
1 Feb 2021, 4:00 pmClosed
Executive Engineer Mahanadi Division CWC Burla
Office Of Executive Engineer Mahanadi Division CWC Burla Sambalpur 768017
CONSTUCTION OF NEW OFFICE BUILDING AT SITE BOUDH UNDER MMSD-II, CWC, BURLA
2021_CWC_610216_1
MD/HQ/NIT/2020-21/89-98 DATED 16.01.2021
Open Tender
Civil Works - Buildings
90 days
Mahanadi Division, CWC, Burla
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
Exempted
3 Mar 2021
16 Jan 2021
3 Feb 2021
16 Jan 2021
1 Feb 2021
16 Jan 2021
Amount
Site Clearance and levelling to the satisfaction as Engineer in-charge
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. all kinds of soil. (Code DSR 2018 Sl. No. 2.8.1 , page 74)
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (Code DSR 2018 Sl. No. 2.27,
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (Code DSR 2018 Sl. No - 4.1.8
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in Cement mortar 1:6 (1 cement : 6 Coarse sand) (Code DSR 2018 Sl. No. -6.34.2,)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (Code DSR 2018 Sl. No.-5.1.2, page - 95)
Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform (Code DSR 2018 Sl. No - 5.9.3)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level - cold twisted bars= (1% of RCC x 78.5X100) Kg (Code DSR 2018 Sl. No - 5.22.3
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (Code DSR 2018 Sl. No -13.1.2,
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Code DSR 2018 Sl. No -13.80
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (Code DSR 2018 Sl. No-11.43,
Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer in-charge: Profile B : Fixing with adjustable lugs with split end tail to each jamb (Code DSR 2018 Sl. No -10.14.1.1,
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws) (Code DSR 2018 Sl. No-9.21.2,
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,complete as per manufacturer’s specification and direction of Engineerin-Charge. (Code DSR 2018 Sl. No -- 9.119,
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing by 30 mm thick plain PVC door shutters (Code DSR 2018 Sl. No -- 9.120.1,
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc. (Code DSR 2018 Sl. No -- 9.48.1,
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. (Code DSR 2018 Sl. No -- 13.42.1,
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. (Code DSR 2018 Sl. No -- 13.48A,
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade by two or more coats on new work (Code DSR 2018 Sl. No -- 13.61.1,
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. (Code DSR 2018 Sl. No -- 19.33, page - 370)
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required by White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. (Code DSR 2018 Sl. No -- 17.68.1,
Providing and fixing soil, waste and vent pipes 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 (Code DSR 2018 Sl. No -- 17.35.1.2)
Providing and fixing soil, waste and vent pipes 75 mm dia Centrifugally cast (spun) iron socketed pipe as per IS: 3989. (Code DSR 2018 Sl. No -- 17.35.2.2)
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia Sand cast iron S&S as per IS : 3989. (Code DSR 2018 Sl. No -- 17.38.1.2)
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete by 100 mm dia Sand cast iron S&S as per IS : 3989. DSR 2018 SL.17.43.1.2
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors by 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989. DSR 2018 SL.NO-17.60.1.1
Providing and fixing sand cast iron S&S off sets as per IS: 3989 with 100 mm dia pipe. DSR 2018 SL.17.54.2.2
Providing teminal guard sand cast iron S & S as per IS-3989 100 mm dia. DSR 2018 SL.17.56.1.2
Providing teminal guard sand cast iron S & S as per IS-3989 75 mm dia. DSR 2018 SL.No17.56.2.2
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter 100 mm. DSR 2018 SL.No.17.59.1
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter 75 mm. DSR 2018 SL.NO 17.59.2
Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:. DSR 2018 SL.17.7.1
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSr 2018 SL.17.31
Providing and fixing PMPT towel ring trapezodial shape 215 mm longs, 200 mm wide with a minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour. Weight not less than 88gms. DSR 2018 SL.17.72
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour by 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (DSR 2018 SL.No17.73.2)
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. DSR 2018 SL.No 9.88
Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. DSR 2018 SL.9.89
Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : DSR 2018 SL.No-9.96.1
Providing and fixing 300x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete DSR 2018 SL.No-9.97.1
Providing and fixing 200x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete DSR 2018 SL.No-9.97.3
Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : ( DSR 2018 SL.No-9.100.1
Providing and fixing IS : 12817 marked 125x64x2.50 mm stainless steel (heavy weight) butt hinges with stainless steel screws etc. complete (for doors). ( DSR 2018 SL.No-9.71.1
Providing and fixing IS : 12817 marked 100x60x2.50 mm stainless steel (heavy weight) butt hinges with stainless steel screws etc. complete (for window). DSR 2018 SL.No-9.71.2
Proving and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper. DSR 2018 SL.No-9.101.2
Providing and fixing 300 mm weighing not less than 330 gms chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : DSR 2018 SL.No-9.94.1
Providing and fixing G.I. Pipes 20 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. DSR 2018 SL.No-18.11.2
Providing and fixing G.I. Pipes 15 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. DSR 2018 SL.No-18.11.1
Providing and fixing 32 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. DSR 2018 SL.No-18.12.4
Providing and fixing 20 mm nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work). DSR 2018 SL.No-18.46.2
Providing and fixing 15 mm nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work). DSR 2018 SL.No-18.46.1
Providing and fixing 15 mm nominal bore brass bib cock of approved quality. DSR 2018 SL.No-18.15.1
Providing and fixing 15 mm nominal bore brass stop cock of approved quality. DSR 2018 SL.No-18.16.1
Providing and fixing 150 mm diameter C.P. brass shower rose with 15 or 20 mm inlet. DSR 2018 SL.No-18.22.2
Providing and fixing 32 mm nominal bore. gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 2018 SL.No-18.17.2
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSRE 2018 SL.No-1.6
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire DSRE 2018 SL.No-1.7.1
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSRE 2018 SL.No-1.7.2
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. DSRE 2018 SL.No-1.7.3
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.. Group A DSRE 2018 SL.No-1.1.1
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. DSRE 2018 SL.No-5.6
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door. DSRE 2018 SL.No-2.4.1
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required. DSRE 2018 SL.No-2.16
Supplying and fixing 63 Amp, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSRE 2018 SL.No-2.14.3
Supply and Fitting Tube light (Market Rate)
supply and Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 510 mm sweep (Market Rate)
Supply and Fitting reputed company made external luminaries to the satisfection of Engineer in charge (Market Rate)
RAJ KISHOR DEBTA
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid