SPL REPAIR TO CAMOUFLAGE PAINTING OF CERTAIN BLDGS AND PROVISION OF WATER SUPPLY AND SEWAGE FACILITY TO CERTAIN BUILDING AT AF STN AGRA

Amount

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to a distance exc 1.5 Km but not exc 5.0 Km etc complete all as specified and directed.

M&L for rendaring 15mm thick in cement mortar 1:4 on external wall surfaces mixed with water proofing compound as per manufacturer's instruction on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement all as specified and as directed. (WPC) shall be measured and paid seperatly under appropriate item)

Supply only Integral water proofing compound.

M&L for preparation of new surface of walls (external surfaces) and Finishing walls with Acrylic smooth exterior paint of required shade. (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in normal comouflage pattern as per manufacturer's instructions etc complete all as specified and as directed.

M&L for providing and applying 1mm thick wall care putty over plastered surface to prepare the surface even and smooth etc complete all as specified and as directed.

M&L for complete removal of existing treatment of old wall surface including broomin down/ steel wire brushing, scrapping down smoke spot, mould, mos and efforescent salts and trading oil and gresy spots and cleaning with water complete all as specified and as directed.

M&L for preparation of old surface of walls (external surfaces) including cleaning and ensure that the surface to be painted is free from any loose, dirt fine cracks and finishing walls with acrylic smooth exterior paint of required shed. (Two or more coat applied @ 1.67/Ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in normal camouflage pattern, as per manufactures instructions, etc complete all as specified and as directed. Note :Sl item No 4 to 7 :- The work shall be carried out upto height of 25.00 metre. The contractor's quoted rate shall be deemed inclusive of this requirement and nothing extra shall be entertained in this regards

Excavating in trenches in soft/loose soil n.exc 1.5M wide and n.exc 1.5M in depth for foundation, laying pipes, cables etc n.exc 10Sqm on plan and getting out in soft/loose soil etc complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 using (40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

M & L for Brickwork with sewer bricks straight or curved on plan exc 6 mtr mean radius for man-holes/ septictank/ soakwell etc. in sewer works, built in CM 1: 4 all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick or concrete surfaces finished fair and even in CM (1:4) complete all as specified and directed.

M&L for PCC type B0 1:2:4 (using 12.5mm graded aggregates) as in copings and benching for manholes including necessary form work etc complete all as specified and as directed.

M & L pre cast cement concrete 1:2:4 type B-1 (using 20mm graded agg.) for MH cover set in CM 1:6 complete all as specified and directed.

M&L for TMT bars 8 mm dia cut to length bent to shape required including cranking, bending & binding with MS wire annealed n.less than 0.90 mm dia etc complete all as specified and as directed..

M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe of 200 mm bore including packing under and haunching against the sides of pipe after they are laid and tested etc complete all as specified and as directed..

M&L for 200 mm dia reinforced cement pipe class NP3 laid and joined etc complete all as specified and as directed..

M&L for returning, filling of soft/loose soil including spreading, leveling watering and well ramming in layers n.exc 25 cm etc complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5M above the starting point etc complete all as specified and as directed..

M&L for 50 user capacity RCC Septic tank designed to carry sewage and suldge / sullage water, including excavation in any type of soil, PCC 1:4:8 type P2 (using 40 mm graded aggregate) below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for for with upflow filter complete all as specified and shown on drawings. No TD/50 sheet 1/1 dated 21.03.2018.

M&L for Constrn of soakage well of size 3.00mm dia (inner) and 3.00m effective depth including excavation any type soil. The outer and inner walls of wells shall be constructed by using sub class B bricks (old size) in cm 1:4 of one brick thick walls. the PCC in foundation shall be PCC 1:4: type b2 (using 40mm graded aggregate) including RCC cover of M-25 type B1 (using 20mm graded aggregate. etc complete all specified & all as shown in drg No TD/576 dt 16.06.89

Supply and laying ductile Iron , Class “K-7” ,100 mm (4”) dia with rubber gasket spigot socket type including all fitting / specials etc complete all as specified and directed.

Supply, laying, testing and commissioning GI tubing medium grade 25mm bore including required GI fitting complete all as specified and directed

Supply, laying, testing and commissioning GI tubing medium grade 40mm bore including required GI fitting complete all as specified and directed

Supply and fix sluice valves, flanged type of class 1.6 PN ,100 mm (4”) dia etc complete all as specified and directed

Supply & fixing in renewal gun metal globe gate valve with iron wheel head, screwed both ends ISI marked for the following sizes all as specified & directed :-

(a) 40 mm bore

(b) 25 mm bore

Demolition of PCC/Black bitumin road of any description and in any position not otherwise specially provided etc complete all as specified and directed.

M&L PCC (1:2:4) type B2 (using 40mm graded aggregate) as in surface,chanells and drains etc complete all as specified and directed

M&L in renewal for Cutting of cast iron pipe in position for insertion of new tee, collar etc for the following bore: -

M&L for boring of holes under road in any type of soil, pavement hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of size for 150mm dia / bore for 0.4mpa work in pressure complete all as specified and directed

Supply, fixing, jointing & testing in renewal cast iron fittings such as bends (any types, radius and angle) tappers, collars, tee , Y junction, plugs, caps and connecting pieces or any other special required at site for the flanged/spigot and socketed pipes upto 150 mm dia complete all as specified and directed.

M & L for construction of brick masonry valve pit with sub-class 'B' brick built in cement mortar (1:6), of size (90 x 90 x 90) cm (internal dimension) with one brick walling and150 cm x150 cm x 10 cm base foundation with PCC (1:3:6), type C2 (using 40mm graded agregate) cement plastering 10 mm thick cement mortar (1:4) on internal & exposed surfaces, including MS cover of size 01mtr x 01mtr made out from 3 mm thick MS sheet including (40 x 40 x 5) mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of the steel surfaces with two coats of synthetic enamel paint (first quality) over a coat of red oxide primer, including necessary earth work & demolition of the existing old valve pit etc, complete all as specified and as directed.

M/S SINGH ELECTRIC CO

deva engineers

saroj constructions

Sethi Brothers

SUBASH MAHAJAN

Rakesh Kumar