Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC VILL PO KOTA VIA PANAGARH BAZAR DIST BURDWAN WB PIN 713148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹42.9 L+₹1.4 L (3.34%)Rejected-Finance | L2 | Rejected-Finance Higher rate quoted than L1 | |
| 3 | L3₹43.3 L+₹1.8 L (4.42%)Rejected-Finance SOUTH CANEL PAR PO PANAGARH BAZAR DISTT PASCHIM BARDWAN WB PIN 713148 | PANAGARH BAZAR | PASCHIM BARDWAN | WEST BENGAL | 713148 | L3 | Rejected-Finance Higher rate quoted than L1 | |
| 4 | L4₹44.9 L+₹3.5 L (8.39%)Rejected-Finance PO BUD BUD DIST BURDWAN WEST BENGAL PIN 713 403 | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L4 | Rejected-Finance Higher rate quoted than L1 | |
| 5 | L5₹45.9 L+₹4.5 L (10.8%)Rejected-Finance | L5 | Rejected-Finance Higher rate quoted than L1 |
Tender Value
₹48.3 L
EMD Value
₹96,600
Closing Date
24 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_547015_1
8400-849/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D and category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹96,600
Yes
24 Nov 2022
23 Aug 2022
26 Sept 2022
23 Aug 2022
24 Sept 2022
7 Sept 2022
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering and all as specified and directed.
M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for RCC (nominal mix) type A1 1:1.5:3, (using 20 mm graded stone aggregate) as in footings foundation beams complete all as specified and directed.
All as per item No 6.00 mentioned here-in-above but in columns complete all as specified and directed.
All as per item No 6.00 mentioned here-in-above but in beam and lintels complete all as specified and directed.
All as per item No 6.00 mentioned here-in-above but in chajja complete all as specified and directed.
All as per item No 6.00 mentioned here-in-above but in slabs supported on walls, beams and columns, in roofs and in shelves and the like complete all as specified and directed
M&L for use and waste of formwork to sides of footing and plinth beams finished fair and rough complete all as specified and directed.
All as per item No 11.00 mentioned here-in-above but for columns complete all as specified and directed
All as per item No 11.00 mentioned here-in-above but for chajjas complete all as specified and directed.
All as per item No 11.00 mentioned here-in-above but for sides and sofits of beams and lintels complete all as specified and directed.
All as per item No 11.00 mentioned here-in-above but for soffits of slab complete all as specified and directed.
All as per item No 11.00 mentioned here-in-above but for side of slab exc 10cm but n.exc 20cm thick complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and directed.
Removing excavated material (soil) n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed
M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.
M&L for brick work with fly ash bricks old size, straight or curved on plan to any radius, in half brick walls built in cement mortar (1:4) complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 21.00 mentioned here-in-above but 6mm to 8mm dia complete all as specified and directed.
M&L for Mild steel TMT bars 8mm dia and over as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified.
M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3 complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying three coat of white wash complete all as specified and directed.
M&L for preparation of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F in opening as per specification and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet trip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, S&F in the frame at site as per specification and drawing complete all as specified and directed.
S&F factory made steel ventilator with centre hung shutters, dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type including one shop coat of red oxide zinc chrome primer complete all as specified.
S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed
S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed
S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm in floors laid over and including 15mm thick (1:6) cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match complete all as specified and directed.
Preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F stop valves 15mm dia CP fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
M&L for steel tubes,15mm dia bore 'medium grade' with all fitting; laid in trenches complete all as specified and directed.
M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.
S&F vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets complete all as specified and directed.
S&F 15mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.
S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specification complete all as specified and directed.
S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe complete all as specified and directed.
S&F CP Bib taps 15mm dia, with crutch of butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fancy type and fixed complete all as specified and directed.
S&F Vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding, complete all as specified and directed. (Make Cat part no.20042 of Hindware or equivalent make of parryware/Cera
S&F wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polyethylene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and directed
M&L for preparation new surface of roof and applying two coat of polyurethane (PU) acrylic based water proofing liquid compound over & including one coat of self priming primer @one litre per ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage /seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge (Notes- 1. As per description of the items minimum two coats of polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by the as per manufacture instruction.pl note no price adjustment shall be made, if more coats of (PU)acrylic based water proofing liquid compound & primer are required for roof treatment. 2. Quoted rate shall be deemed to be included for work in building/structure of any height).
Supply only water proofing compound complete all as specified and directed (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
S&F PVC connection pipe 15mm size & 600mm long with chromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.
M&L for fly ash brick old size straight or curved on plan exc 6 mtr mean radius built in CM (1:6),including demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed
Demolition of cement concrete as in ground floors and pavings n.exc 15 cm thick below or above ground level (unreinforced) including removing rubbish off from the site complete all as specified and directed.
M&L for cement concrete 75mm thick 1:4:8, Type D-2 (using 40 mm graded stone aggregates) as in sub base for flooring etc complete all as specified and directed.
M&L for 25 mm thick, cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate), finishing cement concrete surface even and smooth as in floors for receiving floor tiles or roof padding complete all as specified.
M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement, incl making joints 10mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with and incl bitumen and sand (1:3) by weight complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation and all as specified and directed.
M&L for machine cut Kota stone slab flooring 20-22 mm thick, laid over & including screed bed of 20 mm thick in cement mortar (1:6) and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing complete all as specified and directed
S&F anodised aluminium snap grid 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminium angle & Tee arrangement with and incl fixing cleats screws etc including dismantling complete all as specified in SSR and directed.
S&F hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified.
S&F 6mm thick 'E' board (non asbestos fibre) designer building boards fixed in aluminium frame work in ceiling flat or sloping with screws complete all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed.
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W(Gde- E-250) quality-B complete all as specified and directed
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed.
M&L for complete removal of existing treatment including preparation of plastered surfaces of old wall of any description and applying two coats of white wash on old surface complete all directed.
Demolition of reinforced cement concrete any thickness and removing rubbish off from the site complete all as specified and directed
Taking down window chowkhats or frame n.exc 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.
S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specifed and directed.
S&F factory made, 35 mm thick, panelled shutter second class hard wood, plain framed, hammer marked, (two panel ) with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated ,complete all as specified.
S&F 2nd class hard wood 35mm thick Glazed and Skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauge, etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.
S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified.
S&F 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified.
S&F galvanised stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified.
M&L for 2ne class hard wood as in Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads of size exc 13 Sqcm & n.exc 25 Sqcm complete all as specifed and directed
M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed
S&F aluminium anodised 75 mm barrel tower bolts of extruded section complete all as specified and directed
S&F 125 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F butt hinges, extruded alluminium,with mild steel hinge pin, bright polished and fixed, type 75 mm size C21 complete all as specified and directed.
S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
M&L for Preparation of new Wooden surfaces of any description , not otherwise described over 10 cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for 50mm thick PCC 1:2:4, type B1, (using 20 mm graded crushed stone), as in sub base for receiving floor finish with nominal reinforcement all as specified and directed.
M&L for 75mm thick PCC 1:2:4, type B1, (using 20 mm graded crushed stone aggregate), as in floor finished even and smooth all as specified and directed.
M&L for rendering 15mm thick in on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4) with WPC complete all as specified and directed. (Note: WPC shall be measured and paid separately)
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6) complete all as specified and directed.
M&L for rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja/pillar in cement mortar (1:3) complete all as specified and directed
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor over and including finishes including dismantling of floor hearth or wall tiling incl cement martar bedding complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thick quality not less than group II, straight edge, k, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L for RCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in precast cement concrete louvres and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame set in CM (1:4) complete all as specified and directed
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for two coats of oil bound distemper on newely wall surface over a coat of alkali resistant primer including preparation complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for complete removal of existing treatment and applying two coats of oil bound distemper on wall surface over a coat of alkali resistant primer complete all as specified and directed
M&L for three coats of white washing on new plastered surfaces including preparation of complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of white washing on ceiling surfaces complete all as specified and directed.
M&L for complete removal of existing treatment from wall & applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 , alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
S&F aluminium wire mesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium beads complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as directed
S&F in repair aluminium curtain rod 25mm dia Decorative type with a pair of brackets, approved pattern and colour, complete all as specified and directed.
M&L as in repair Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.
M&L for rendering 10 mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar (1:4) with WPC complete all as specified and directed.
S&F 1.0mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed
M&L for 100 mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor finished even and fair all as specified and directed.
S&F 10 ltr capacity PVC flushing cistern symphonic action type white dual flush ISI (IS 7231) marked with flush pipe in repair complete with all fixing arrangements for all as specified and directed.
M&L for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for tubes 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing complete all as specified and directed.
M&L for (except tubes) for 15mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.
S&F in repair CP Stop valve, any description, suitable for 15mm bore pipe as complete all as specified
S&F in repair Bib taps, cast copper alloy with handle, chromium plated fancy type, long body with wall flange screwed down, suitable for 15 mm bore pipe complete all as specified and directed.
S&F tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and directed.
S&F in repair Waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) IN REPAIR, complete all as specified and directed.
S&F in repair Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes, complete all as specified.
Dismantling of cast iron pipes with all fittings and fixing accessories, jointed in cement mortar 75/100 mm bore, at any location, complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for all complete all as specified and directed.
S&F 110 dia PVC (SWR) plain bends any radius with complete all as specified and directed.
S&F 100mm bore grating with or without hole of PTMT (Minimum weight 25 gm) and fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment, complete all as specified and directed.
M&L for straight or raking out Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc. including rubbed finish and waste including providing chicken wire mesh complete all as specified and directed
S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top) confirming to relevant IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge
S&F of high pressure PTMT float valve with epoxy coated aluminium rod and high density polyethylene ball screwed for iron pipe 25 mm dia with fly nut complete including taking down old unserviceable float valve complete all as specified and directed.
M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete including taking down old unserviceable gate valve all as directed.
S&F 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F in repair 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
EM PORTION M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 132.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as per specified and directed
All as per item No 132.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as per specified and directed.
M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.
S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps ) flush type controlled by one switch complete all as specified.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Same Board only)
S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
S&F building security light fittings 25 watts, minimum system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbonate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.
S&F 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed.
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wirer electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.
S&F ventilating exhaust fan 230 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.
Taking down carefully aluminium conductor point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing (except those to be reused shall be kept in safe custody at the site) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .
S&F lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified.
S&F two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including and including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note: (i) Quoted rate is included for necessary chasing and cutting and making good the surface as per existing. (ii) 3 core cables and conduit will be measured as single unit).
S&F in repair 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.
S&F Vertical distribution board double door TPN 4 way with IP 43 multiphase outgoing suitable for mounting 100 Amps as incomer with Bus bars, Neutral links complete with all accessories complete all as directed.
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
S&F MCCB of 4 pole , 415 volts of capacity 100 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessry connection complete all as specified and directed.
Taking down of AC ceiling fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length n.exc 0.5 metre) from ceiling rose to fan as directed by the Engr-in-Charge. (Note : Accessories such as gun metal bush and split pin and jam nut shall be measured and paid under relavtem here-in-after).
M&L for painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc complete all as directed.
Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 2.0 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge. (Note: Excavation,sand cushioning,brick will be measured and paid separtely).
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note : Punned thickness 18 cm shall only be considered for payment)
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.
Supply, laying / fixing / connecting, testing and commissioning of LT 16 Sqmm x 4 core under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge. (Note: Excavation, sand cushioning, brick will be measured and paid separtely).
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
Hooghly Construction Co.
ROY ENTERPRISE
HIGH HILLS INFRA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .