ADDN ALTN TO BLDG NO P 53 ALONGWITH HARDSTANDING OF PARKING LOT AND PATHWAY AT MILIT INCLUDING PROVN OF SUNSHADE AND CHAIN LINK FENCING AT OR LINE BLDG NO P-57 OF MILIT GIRINAGAR PUNE

Amount

M&L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry including dismantling single layer Manglore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

All as per item here in befor but except tiles.

M&L for Ridges or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 etc. including dismantling of tiles and rubbish off the premises complete all as specified and as directed.

M&L for 2nd class hardwood, clean sawn, in scantling timber work incl. dismantling of scantling and rubbish off the premises all as specified and directed.

Dismantling battens for tiles, shingle etc. of any size including tilting fillets spaced exc. 15cm.

M&L 2nd class hard wood clean sawn battens at 30cm having sectional area exc. 5 and not exc. 15Sqcm.

All as per item here in befor but fixing only.

M&L for Eaves/weather boarding with 20mm thick fibre cement board (Non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fibre tape as per manufacturer's instructions complete of approved arch pattern, size, colour and shape including dismantling of old boarding/eaves board fixed in any position complete all as specified and as directed. Make:- V-Board (Vishaka Indurstires Ltd)/Everest/Charminar/Ramco.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete.

M&L 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screws in roofs, walls with grade of zinc coating 275 complete.

All as per item here in above but fixing only except sheeting.

M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coat of creosote oil complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of pink primer including preparation of new/old painted wood surfaces complete.

Dismantling brick or stone masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles.

Excavation in trenches not exc 1.50mtr wide and not exc 1.50mtr in depth for foundation etc and getting out in soft / loose soil.

Surface excavation n.exc 30cm deep and average 15cm and getting out in soft/loose soil.

M&L for cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete all as specified and directed.

M&L for cement concrete 1:2:4 Tpe B-0 using 12.5mm stone aggregate as damp proof course 40mm thick complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete.

Returning filling in, well watering ramming in layers not exceeding 15cm thick complete all as directed.

Removing of excavated soil to a distance not exc 50mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed by Engr-in-charge.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

Rendering 15mm thick on brick, stone or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified.

Rendering 15 mm thick on brick, stone surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified.

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling complete all as spescified.

M&L for applying two coats of acrylic emulsion paint (lustar paint) internally over a coat of acrylic primer over 2mm thick coat of waterproof putty in two layers on old or new plaster surfaces of wall including preparation of surfaces complete.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of ceiling complete.

M&L for two coats of oil bound distemper over a coat of primer on Old surfaces of ceiling complete.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over new surfaces of wall including necessary scaffolding required for painting work, safety measures etc.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) as in footing, plinth beam complete.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) as in column, pillars, posts complete.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) as in Roof beams, lintels, cantilevers etc.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) as in slabs supported on walls, chajja, Roof beam, roofs , canopies, shelves & the like.

Formwork to side of concrete foundations footings,bases of column,raft and beams ,side and soffits of foundation and plinth beams and similar work and finish fair finished to flat surface.

M&L for form work to side of pillars, posts, column etc.

M&L formwork to soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc.

M&L formwork to soffits of suspended slab such as roof slabs , chajja, floor slabs, shelve, landings and similar works n.exc 200 mm thick (horizontal or sloping).

Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incfluding cranking, bendidng etc and binding with and includidng mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified.

Mild steel TMT bars 5 to 10mm dia as in sturrips scut to length bebt to shap required including cranking, bending etc and bindidng and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 105X60mm complete.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded aggregate) as in filling steel frames etc. incl necessary form work complete.

M&L for 40mm thick Flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete.

M&L for 300mm long aluminium alloy anodised, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for 150mm floor door stopper of stainless steel chromium plated fixed to door complete.

S&F 150mm long aluminium handles, cast type anodised complete.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed.

M&L for 0.9mm thick decorative laminate type1 of surface finish, colour and pattern as approved by Engr-in-charge, fixed with approved adhesive as per manufacturer's instructions.

M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered or riveted or gorged into spikes framed guard bars barred to windows, iron door,ladders framed balusters, walk ways, railing, frame work for water tank and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness including cover fillets.

S&F of mineral fibre acoustic suspended ceiling system with Dune (Board) Edge Tiles with 24mm exposed grid (Make Armstrong or Saint Gobain). The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance > 85%, Thermal Conductivity k=0.052 - 0.057 w/m K, Colour White, Fire Performance UK class 0/ Class 1 (BS 476 pt - 6 & 7) in module size of 600mm x 600mm x 16mm, suitable for green building application, with Recycled content of 32%. The tile shall be laid on Armstrong Prelude 38 (or equivalent in Saint Gobain) with 24mm wide T- section flanges colour white having rotary stitching on all T section i.e. the Main Runner, 1200mm & 600mm Cross Tees with a web height of 38mm and a load carrying capacity of 15.34Kg/Sqm & minimum pull out strength of 100kg. The T section have a Galvanizing of 90 grams per Sqm. Suspension system accessories (manufactured by Armstrong/Saint Gobain) consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a Galvanised thickness of 80gsm, A pre Straightened Hanger wire of dia - 2.5mm of 1.8m length, thickness of 80gsm and a tensile strength of 344-413MPa, along with Adjustable hook clips of 0.8mm thick, galvanised spring steel of 2.68mm with a minimum pull strength of 110kg. The adjustable clip also consists of a 3.5mm aquiline wire to be used with the main runner. Main runner shall be spaced at 1200mm centres securely fixed to the structural soffit at 1200mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450mm maximium centres. Make/Manufactures:- Armstrong or Saint Gobain.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L cement concrete PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base 75mm thick complete all as specified.

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick.

M&L vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over 15mm thick screed bed in CM 1:6 .

M&L vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in skirting/vertical surfaces etc. and joineted neat in cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM 1:4 .

M & L for granite 18mm thick black/red colour (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for door, partition wall, ventilator etc. with one or more rebates, shutters, grills including joining cleat, glazing clips, rubber packing anodised aluminium snap for fixing glass, 12mm thick particle board etc. complete all as specified. (Jindal Section No 20048=0.942 Kg/M for door frame, Glazing Clip 19370=0.109 kG/M, Partiiton section 14066= 1.345 Kg/Rm).

S&F 12mm thick, prelaminated both side cement bonded particle board are to be of wood finish teak shade and conforming to IS-142-1995, (Bison Panels by NCL group, member indian green building council). The composition of the boards comprises of approximately 60% Cement 30% plantation wood (remaining being other chemical/water binders etc.) with a density of approximately 1250-1300Kg/M3, including fixed with scews to Aluminium frame work for doors, partitions, cabinets, cupboards, wall panelling, cladding etc. including screws and all screw finish with lambi etc. as per specifications. Note:- All Bison panels are fixing by self threaded machine screw, 25/38mm as per requirement. the system used together should carry a 10 years warantee.

M&L for Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface.

M&L for 75 mm thick cement concrete 1:4:8 type B1 using 40 mm graded stone aggregate as in sub base.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete.

M&L for cement concrete type B1,1:2:4 (20mm graded stone aggregate) as in bed block, kerb or mud stop, slightly rounded or champhered on edges complete all as specified and directed.

Framed MS work as in doors or gates of angle or other section with gusset plates, rails braces etc, complete drilled for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings also fastening and fixing complete all as directed and complete with locking arrangement.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

S&F steel work in tubular/square/rectangular trusses, cantilever, purlin including special shaped washer etc. complete using ERW or induction butt welded square/rectangular pipes including necessary cutting, welding complete all as specified and directed by Engr-in-Charge.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10 cm width or girth etc.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on old steel surfaces exc 10 cm width or girth etc.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on new/old steel surfaces not exc 10 cm width or girth etc including preparation of surfaces complete.

M& L for Silicon sealant for sealing of existing window aluminium frame with penetration depth 10 mm and 10 mm wide using sealant gun finished in triangular shape complete all as specified and as directed.

Complete removal of entire existing water proofing treatment in any position including tarfelt, Plaster, lean concrete, gravels etc. and removing the debries out side MD land all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified. Note: Water Proofing compound shall be measured and paid for seprately as "Supply Only"

M & L for APP based polymeric membrane minimum weight 3 Kgs/Sqm and minimum 3 mm thick reinforced with polyster non-woven fabric ( wt not less than 150 gms/sqm laid over primed surface with bituminous primer conforming to IS- 3384 @ 0.3 litre/sqm and finishing with preventive coat with aluminium paint @ 100m/sqm all as directed and specified including vertical surface complete.

M&L for cutting grooves in brick wall, Stone wall & concrete wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 including fixing of APP based polymeric membrane complete.

Supply only WPC.

S&F Steel rolling shutters thickness of laths 1.25mm MS sheet, with necessary ball bearing, as specified including top cover, anchoring rod, hasp and staple erected in position as indicated but gear operated type with bevel gear box and crank handle, complete including taking down old shutter all as per directed by Engr-in-Charge.

E/M WORKS (INTERNAL E/M WORKS) Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC casing capping fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including Modular box , modular cover plates with frame mounting for housing the switches, socket outlets etc, all as specified and directed . (a) One light point controlled by one way switch.

(b) One Ceiling Fan/Exhaust point controlled by one way switch.

(c) One 3 pin switch socket outlet point 6 Amps on independent board.

(d) One 3 pin switch socket outlet point 6 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 16 amp independent, with cable 2.5 sqmm size.

S & Fix modular switch, single pole,one way 6 Amps capacity

S & Fix modular switch, single pole, one way 16 Amps capacity

S & Fix modular socket, outlet 2 in 1, 6 Amp capacity

S & Fix modular, socket 6A/16A 2 in1, 16 Amp capacity

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete.

S & Fix modular fan regulator electronic 2 modular type volts AC 50 HZ ,100 Watts, 4 step complete all as directed.

S & Fix LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable 23/0.0076 from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge. Make :- Bajaj Cat Part No - BLRB DB 118 or eqvt in Wipro/Havell/Crompton.

S & Fix LED tube light rod 18 watts with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. Make - Bajaj Cat Part No - BLRB 18W LED or eqvt in Wipro/Havell/Crompton.

S & Fix LED efficient LED recessed mounting fitting 2' X 2' luminaire to enhance the delight of occupents with comfortable experience through its classic design & glare free soft illumination all as specified & directed Make - Bajaj Cat Part No - BZRSQL 36L LED GX D WH SD or eqvt in Wipro/Havell/Crompton.

S & Fix MCCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge. Make :- Legrand or eqvt make of ABB/Siemens

S & Fix sheet metal enclosure distribution board SPN 8 ways 240 volts, 100 amps rated busbar with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed.

S & Fix sheet metal enclosure distribution board SPN 12 ways 240 volts, 100 amps rated busbar with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed.

S & Fix MCB single pole, 240 volts, 6 to 40 Amps, all as specified and as directed.

S & Fix MCB single pole & neutral, 240 volts, 6 to 40 Amps, all as specified and as directed.

S & Fix MCCB , 4 pole, 415 volts,16 KA, 100 Amps, all as specified and as directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC Casing caping fixed to walls / roofs / floors / ceiling etc with its accessories all as specified and directed by Engr-in -charge for the following. (a) 2x4 sq mm and 1x4 sq mm as earth wire

(b) 2x6 sq mm and 1x6 sq mm as earth wire

Taking down and refixing of Ceiling fan, wall Mounted Fan and Exhaust fan any size/sweep, including oiling, Greasing and cleaning complete all as specified and as directed.

S & Fix for ceiling fan down rods 1.0 M Long of 15 mm dia GI pipe to the existing trusses of any height including necessary welding & fixing with clamps and nut bolts etc complete all as specified and as directed.

S & Fix Wall mounted fan 400 mm sweep white colour, 230 volts, 55 Watts including fixing arrengenment on wall all as directed by engr in charge. Make- Havells or eqvt in Bajaj / Crompton.

Taking down split type AC any capacity make model from existing position and carry out the servicing by cleaning indoor and outdoor unit with the terminal loose connection applying the oiling /greasing to fan motor bearing all and in the location as directed including provision of 45x45x5mm angle iron frame work for mounting of outdoor unit , fixing of indoor unit all as all as specified and directed by Engr-in-charge.

S & Fix capillary tube special annealed double wound copper tubing suitable for 1.5/1.8/2 ton table top type air conditioner of diameter 0.25 " bore as per existing complete all as specified and directed.

S & Fix Single pole and neutral enclouser with two pin and earthplug and socket complete with one single pole MCB with 240 V 20 AMPs.

M & L for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less that 1.5 M below normal grouond level connected to GI earth wire 4 mm dia by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No 03 of SSR Part-I connected to earthing test point / DB including excavation / earth work in any type of strata, removal of surplus earth, GI pipe for watering pipe withand funnel, PCC 1:3:6 Type C-1 chamber with 40mm thick RCC 1:2:4 type B-1 in cover slab with TMT bars @ 150mm c/c both way with GI protection pipe complete all as specified and directed by Engineer-in-Charge.

E & M WORKS (EXTERNAL ELECTRIC SUPPLY) Supply and Laying and testing cable XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm, 4 core cable connecting lugs, glands,jointing materials etc, laid on wall, floors, roof, ducts and fixing using clamps, saddle complete all as directed by Eng-in-charge of following.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in Hard / dense or any type of soil including forming bottom surface etc.

Returning, filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 50 mtr above the starting point.

Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement.

Material and labour for cutting of bituminous road / floor for laying of pipe / cables not exceeding 30 cm wide and not exceeding 60 cm deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick complete all as specified and directed by Engr-in-Charge.

M &L for GI pipe ''light grade'' for road crossing / on wall / on pole for cable protection of following size:- Make: TATA/JINDAL/ PRAKASH SURYA a) 50 mm dia

PAWAN B SHINDE

Mehta and Co.

Mourya Enterprises

DAKSH ENGINEERS AND BUILDERS

Ganesh Sonajirao Garje