Providing, fitting, fabrication and installation of sheds for drought lift irrigation station along with allied mechanical works at Sai and providing, fitting, fabrication and installation of shed along with allied mechanical works for drought lift i

Providing, fitting, fabrication and installation of sheds for drought lift irrigation station along with allied mechanical works at Sai

Providing, fitting, fabrication, installation of shed of 10 ft- length x 10 ft- width x 10 ft- height for drought lift irrigation station at Sai by dismantling the suction and delivery pipelines of drought pumps, lifting of existing drought pump from place of installation using crane. Excavation of earth on 10 ft x 10 ft area upto 1 ft depth. Levelling of surface 10 ft x 10 ft by compacting the earth, laying of layer of stones and compacting. Laying of 1:3:6 grade (1 cement: 3 sand: 6 aggregates) on the 10 ft x 10 ft area up to required height (2 ft from the ground level). Curing of concrete structure for 5 days. The frame of the shed should be fabricated and welded out of 50 x 50 x 5 mm MS angle iron. The sides of frame must be grouted in concrete. Two number centre supports of 50 x 50 x 5 mm MS angle iron have to be welded between each side of frame. Providing and fitting of 0.5 mm colour coated profile sheet with aluminium zinc coating of ISI mark (Tata/ Essar / Bushan/ JSW/ Asian ) on the fabricated structure with nut, bolts and washers. The shed must be provided with door of suitable width and height as per size of drought pump, for easy removal of pumping machinery for repairs and maintenance. The door should have heavy duty latch for locking arrangement. The shed must be provided with window of 3 ft width x 3 ft height should be fabricated on side. The shed must have provision for inlet of suction pipe and outlet of delivery pipes. The roof of shed must be inclined from one side to prevent water logging. The lower ends of sheets around the periphery of the fabricated shed must be grouted in concrete to prevent entry of reptiles, insects and seepage of water inside the shed. Electrification of shed by providing and fitting of one no 50 watt LED light inside the shed, the job involves providing and fitting 1 sq. mm copper cable for connections and all cables must be properly covered with PVC pipe and should not have any loose connections. Providing and fitting of on/off switches for lights and one number socket. Installation of drought pump inside the newly fabricated shed using crane. Connecting suction and delivery pipelines. Providing and fitting of 40 ltr oil tank for engine, the tank must be leak proof with sufficient inlet of diesel and have standard outlet for connecting diesel pipe to engine. Providing and fitting of diesel pipe for from oil tank to engine. Providing, fitting and replacement of 10 ft 150 mm diameter MS pipe on the delivery side of the pumping unit. Complete job includes cost of material, consumable, handling, labour charges for both skilled /semi-skilled labour and hiring charges for Crane, shuttering charges, tools and tackles required during the execution of the job at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. The sizes and dimensions can vary by +- 5 percent depending upon the site conditions. Providing, fitting, fabrication, installation of shed of 10 ft- length x 9 ft- width x 10 ft- height for storage of material and workers at lift irrigation station at Sai . Excavation of earth on 10 ft x 10 ft area upto 2 ft depth. Levelling of surface 10 ft x 10 ft by compacting the earth , laying of layer of stones and compacting. Laying of 1:3:6 grade (1 cement : 3 sand: 6 aggregates ) on the 10 ft x 10 ft area up to required height. Curing of concrete structure for 5 days. The frame of the shed should be fabricated and welded out of 50 x 50 x 5 mm MS angle iron. The sides of frame must be grouted in concrete. Two number centre supports of 50 x 50 x 5 mm MS angle iron have to be welded between each side of frame. Providing and fitting of 0.5 mm colour coated profile sheet with aluminium zinc coating of ISI mark (Tata/ Essar / Bushan/ JSW/ Asian ) on the fabricated structure with nut, bolts and washers. The shed must be provided with door on the front side of suitable width and height for easy removal and stacking of material, The door should have heavy duty latch for locking arrangement. The roof of shed must be inclined from one side to prevent water logging. The lower ends of sheets around the periphery of the fabricated shed must be grouted in concrete to prevent entry of reptiles, insects and seepage of water inside the shed. Electrification of shed by providing and fitting of one no 50 watt LED light inside the shed, the job involves providing and fitting 1 sq. mm copper cable for connections and all cables must be properly covered with PVC pipe and should not have any loose connections. Providing and fitting of on/off switches for lights and one number socket. Complete job includes cost of material, consumable, handling, labour charges for both skilled /semi-skilled labour and hiring charges for Crane, shuttering charges, tools and tackles required during the execution of the job at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. The sizes and dimensions can vary by +- 5 percent depending upon the site conditions.

Providing, fitting, fabrication and installation of shed along with allied mechanical works for drought lift irrigation station at Burejal.

Providing, fitting, fabrication and installation of shed of 12 feet in length x 11 feet in width x 10 feet in height for drought lift irrigation station at Burejal by dismantling the suction and delivery pipelines of drought pumps, lifting of existing drought pump from place of installation using crane and stacking it at proper safe place . Excavation of earth on 12 ft x 11 ft area upto 1 ft depth. Levelling of surface 12 ft x 11ft by compacting the earth, laying of layer of stones and compacting. Laying of 1:3:6 grade (1 cement: 3 sand: 6 aggregates) on the 12 ft x 11 ft area up to required height. Curing of concrete structure for 5 days. The frame of the shed should be fabricated and welded out of 50 x 6 mm MS angle iron. The sides of frame must be grouted in concrete upto the depth of 2 feet. Two number centre supportsof 50 x6 mm MS angle iron have to be welded between each side of frame. Providing and fitting of 0.5 mm colour coated profile sheet with aluminium zinc coating of ISI mark on the fabricated structure with nut, bolts and washers. The shed should have grill type mild steel collapsible sliding gate on the front side for easy removal of pumping machinery in case of maintenance and repairs. The total area of sliding gate should be of 8 ft height x 8 ft width. The mild steel collapsible sliding gate must have 24 number of vertical members made up of double channel section and 6 number of horizontal cross members made up of MS strips.The expansion between the two consecutive vertical members should be 6 inches. The total area of maximum expanded MS gate should be 96 sq ft. The horizontal and vertical members must be fastened together by means of rivets. The sides of gates must be enclosed in MS angle and the gate must slide between the angle iron frames on rollers made up of MS. The gate should have handles on both sides along with provision of locking. The movable rollers must be properly greased for smooth movement. The shed must be provided with door on the back of shed towards water intake side for approach of 3 ft width x 7 ft height should be fabricated on side. The shed must have provision for inlet of suction pipe and outlet of delivery pipes. The roof of shed must be inclined from one side to prevent water logging. Electrification of shed by providing and fitting of two no 50 watt LED light inside the shed, the job involves providing and fitting 1 sq. mm copper cable for connections and all cables must be properly covered with PVC pipe and should not have any loose connections. Providing and fitting of on/off switches for lights and one number socket. Installation of drought pump inside the newly fabricated shed using crane and highly skilled manual labour. Connecting suction and delivery pipelines to installed pump. Providing and fitting of 40 ltr oil tank for engine, the tank must be leak proof with sufficient inlet of diesel and have standard outlet for connecting diesel pipe to engine. Providing and fitting of diesel pipe and over flow pipes from oil tank to engine. Providing, fitting, welding and laying of MS suction of 150 mm diameter 6 metersfrom pump to intake. Removing of damaged/ rusted suction pipeline from installed position by way of excavation of earth up pipe level and dismantling of existing suctionby way of cutting rusted, damaged nuts, bolts with gas welding. Providing, fitting ofMS plate flanges of 150 mm internal diameter with suction pipe at different lengths. Welding of the flanges at the ends of pipes with double layered welding to avoid any leakages as per site conditions. Providing and fitting of rubber gaskets between each MS flange joint. Fastening of each length of suctionpipe with hexagonal nuts and hexagonal bolts. The job includes refilling of earth after laying of pipeline. Designing and fabrication of angle iron structures to support the delivery and suction pipeline. 50 x 50 x 5 mm angle iron should be used for fabrication. The structure should be properly grouted in concrete to support the load and vibrations of delivery pipeline. Painting of complete pipeline and structure made up of angle iron with with one coat of red oxide primer and black paint. Complete job includes cost of material, consumable, handling, labour charges for both skilled /semi-skilled labour and hiring charges for Crane, shuttering charges, tools and tackles required during the execution of the job at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions. The sizes and dimensions can vary by +- 5 percent depending upon the site conditions.

M/S UK MECH AND ELECT ENGG WORKS

M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS

GANPATI ELECTRICAL AND MECHANICAL WORKS

Rishabh Electricals and Mechanical Works

CHENAB ENGINEERING WORKS

M/S NARESH MECHANICAL AND ELECTRICAL ENGINEERING WORKS

Rishabh Electricals and Mechanical Works