Annual Rate Contract for Electrical Maintenance Works at PHBPL Paradip station

Fixed Part of Electrical ARC

Providing Highly Skilled Service Assistance for Electrical Maintenance Work on monthly basis, having diploma in electrical or having Electrical Supervisory Compentency certificate for electrical works in HT Power System and also have basic knowledge of computer op eration

Reimbursement against Wage Enhancement after Oct-2025 in daily wages as per notification of Chief Labour Commissioner Gov. of India area "C" for highly skilled labour

Extra hour charges for highly Skilled Service Assistance for Electrical Maintenance Work beyond normal working hours or on Weekly O FF/Holiday

Reimbursement against change of Over Time Rates due to Wage Enhancement after Oct-2025 as per notification of Chief Labour Commissi oner Gov. of India area "C" for highly skilled labour

Providing Skilled Service Assistance for Electrical Maintenance Work on monthly basis, having ITI in electrical/electronics and mini mum two year work experience in HT / LT (415V) Electrical system for assisting of maintenance work

Reimbursement against Wage Enhancement after Oct-2025 as per notification of Chief Labour Commissioner Gov. of India area "C" for s killed labour

Extra hour charges for Skilled Service Assistance for Electrical Maintenance Work beyond normal working hours or on Weekly OFF/Hol iday

Reimbursement against change of Over Time Rates due to Wage Enhancement after Oct-2025 as per notification of Chief Labour Commissi oner Gov. of India area "C" for skilled labour

Providing Unskilled Labour on per day basis (As & when required during audit or orher urgent works as directed by EIC/Site Engineer) , the work, for which unskilled labour is asked shall be supervised by the contractor's supervisor.

Reimbursement against Wage Enhancement after Oct-2025 in daily wages as per notification of Chief Labour Commissioner Gov. of India area "C" for Un-Skilled labour

Extra hour charges for Un-Skilled labours, beyond the normal working hours or on Weekly OFF/Holiday

Reimbursement against change of Over Time Rates due to Wage Enhancement after Oct-2025 as per notification of Chief Labour Commissi oner Gov. of India area "C" for Un-Skilled labour

Reimbursement against payment of PM Insurance Scheme (PMSBY @ Rs. 20.00 & PMJBY @ Rs. 436.00) per labour per year for skilled & highly skilled labours

MOS Payment to Skilled & Highly Skilled Labours as per HR Circular (Rs. 128 per attendance to each labour)

Lump Sum reimbursement against the providing required PPE for Skilled & Highly Skilled Labours as per direction of EIC/Site Engineer and production of bill of respective PPEs.

Variable Part Composit Items

Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcu ding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge.

6 amps. - 1 way - SP - 1 module switches

6 amps. - 2 way - SP - 1 module switches

10 amps. - 1 way - SP - 2 module switches

10 amps. - 2 way - SP - 2 module switches

16 amps. - 1 way - SP - 1 module switches

6 amps. - 1 way - SP - 1 module push button

6 amps. - 1 way - SP - 1 module bell push

60 to 400 walts 2 module light dimmer

Two module stepped type electronic fan regulator 100W

230 V AC 1 module buzzer

6 amps. - 2 / 3 pins combined 2 module shutterred socket

6 amps. - 3 pins combined 2 module shutterred socket

6 / 16 amps. - 3 pins combined 3 module shutterred socket

16 amps. - 3 pins - 3 module switch socket

2 pins - 1 module telephone socket

2 pins telephone plug

1 module blanking plate

6 pin 25 A modular type socket lSI Marked

25 A modular SPMCB

Supply and fixing of below given white cover plate with frame for mosaic wiring accessories of M/s MDS or approved equivalent inlcud ing supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge.

1 module

2 module

3 module

4 module

6 module

8 module

12 module (6 x 2)

18 module (6 x 3)

Supply and fixing of below given metal flush boxes to accommodate mosaic wiring accessories of M/s MDS or approved equivalent inlcud ing supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge.

1 / 2 module

3 module

4 module

6 module

12 module (6 x 2)

8 module

Supply and fixing of below given metal surface boxes to accommodate mosaic wiring accessories of M/s MDS or approved equivalent inlc uding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge.

1 / 2 module

3 module

4 module

6 module

12 module (6 x 2)

8 module

Supply, installation, testing and commissioning of ceiling fans of Bajaj/Crompton Greaves/Khaitan/Usha make only including supply an d fixing of the electronic regulators with all necessary supports. All complete with labour and materials as per drawings, specifi cations and directions of Engineer-in-Charge.

1200 MM SWEEP (WHITE)

1400 MM SWEEP (WHITE)

Supply, installation, testing and commissioning of single phase , Fresh Air Fans / Heavy duty Exhaust Fans of Bajaj/Crompton Gr eaves/Khaitan/Usha make only including supply and fixing with all necessary supports All complete with labour and materia ls as per drawings, specifications and directions of Engineer-in-Charge.. NOTE: Necessary civil works required for fixing t he exhaust fans shall be in the scope of Contractor.

FRESH AIR FAN WITH LOUVER SHUTTER 300MM SWEEP

FRESH AIR FAN WITH LOUVER SHUTTER 400MM SWEEP

HEAVY DUTY EXHAUST FAN WITH LOUVER SHUTTER 300MM SWEEP, 900 RPM

HEAVY DUTY EXHAUST WITH LOUVER SHUTTER 450MM SWEEP, 900 RPM

HEAVY DUTY EXHAUST FAN WITH LOUVER SHUTTER 300MM SWEEP,1400 RPM

HEAVY DUTY EXHAUST WITH LOUVER SHUTTER 450MM SWEEP,1400 RPM

Supply, installation, testing and commissioning of Wall Mounted Fans of Bajaj/Crompton Greaves/Khaitan/Usha make only including sup ply and fixing of the electronic regulators with all necessary supports. All complete with labour and materials as per drawings, sp ecifications and directions of Engineer-in-Charge.NOTE: Necessary civil works required for fixing the exhaust fans shall be in the s cope of Contractor.

OSC. WALL & CABIN FANS OF 300MM SWEEP

OSC. WALL & CABIN FANS OF 450 MM SWEEP

Supply and installation of 125A, TPN, L&T make / equivalent approved switch fuse unit in sheet steel enclosures with suitable H RC fuses as incomer to distribution board including structures and accessories. All complete with labour and materials as per direct ions of Engineer-in- Charge.

Supply, installation, testing & commissioning of following Ex-e/ weather proof junction boxes of FCG/Baliga make, suitable for ligh ting distribution including supply of steel structure, Elemax terminal blocks suitable for terminating upto 25 sqmm PVC A1. cables, welding, painting etc. All complete with labour and materials as per drawings, specifications and directions of Engineer-in-Charge. Multi way Ex-e, WP Junction box with flanged cover of following internal dimensions:

250 x 160 x 125 with IP 66 protection

300 x 225 x 125 with IP 66 protection

300 x 300 x 125 with IP 66 protection

450 x 300 x 150 with IP 55 protection

350 x 250 x 180 with IP 55 protection

Supply, fixing and connection of following bulk head/well glass fittings of Philips/ approved equivalent make on wall/ceiling with lamps (lamps cost will be paid separately) all accessories and necessary supports. All complete with labour and materials as p er drawings, specifications and directions of Engineer-in-Charge..

Well glass Type HDL 203/80W HPL-N Integeral industtrial well glass luminiare

Well glass Type HDL 203/125 W HPL-N Integeral industtrial well glass luminiare

Well glass Type SDL 203/70W (E)SON Integeral industtrial well glass luminiare

Well glass Type SDL 203/70W(I) SON non Integeral industtrial well glass luminiare

Well glass Type NDC 203/MLL 160W Integeral industtrial well glass luminiare

Well glass Type NDC 203/GLS 200 W non Integeral industtrial well glass luminiare

Bulk Heads type NXC 101/GLS 60W

Bulk Heads type FXC 101/PL-S 9W

Supply and installation of following street light pole with marshalling box to accommodate 3 Nos. of 4x10sqmm PVC armoured cable wi th Elemex terminal block, earthing of pole/marshalling box but excluding lighting fixtures etc. with 8 SWG GI wire including ma king PCC (1:3:6) foundation, painting and numbering all complete with labour and materials as per standard drawi ngs, specifications and directions of Engineer-in-Charge. NOTE: Cable required from lighting fixture to Marshalling box will be supp lied by Owner .

1 MTR HEIGHT STEEL TUBULAR LIGHTING POLE

3 MTR HEIGHT STEEL TUBULAR LIGHTING POLE

9 MTR HEIGHT (SINGLE ARM) (IS:2713, DESG:410SP- 26) Botttom section: 5.0 m x 114.3 mm x 4.5mm Middle section:2.0 m x 88.9 mmx 4.05 m m TOP section :2.0 m x 76.1 mm x 3.25 mm Arm: 1.5 m x 48.4 mm x 3.2 mm (Length x OD x thickness)

12 MTR HEIGHT (SINGLE ARM) (IS:2713, DESG:410SP- 59) Botttom section: 5.8 m x 165.1 mm x 4.85mm Middle section:3.10 m x 139.7 mmx 4. 50 mm TOP section :3.10 m x 114.3 mm x 3.65 mm Arm: 1.5 m x 48.4 mm x 3.2 mm (Length x OD x thickness)

9 MTR HEIGHT (DOUBLE ARM) (IS:2713, DESG:410SP- 26) Botttom section: 5.0 m x 114.3 mm x 4.5mm Middle section:2.0 m x 88.9 mmx 4.05 m m TOP section :2.0 m x 76.1 mm x 3.25 mm Arm: 1.5 m x 48.4 mm x 3.2 mm (Length x OD x thickness)

12 MTR HEIGHT (DOUBLE ARM) (IS:2713, DESG:410SP-59) Botttom section: 5.8 m x 165.1 mm x 4.85mm Middle section:3.10 m x 139.7 mm x 4.50 mm TOP section :3.10 m x 114.3 mm x 3.65 mm Arm: 1.5 m x 48.4 mm x 3.2 mm (Length x OD x thickness)

Supply and fixing of surface mounting type, housed in sheet steel enclosure with side handle operation and have front access left op ening doors interlocks to prevent opening when the switch in ON position HBC fuse type heavy duty double break fuse switches conform ing to IS 13947 Part III with HBC fuses including drilling holes on the board, connections, earthing the body etc. as requi red. Note- FSU of English Electric / L&T / Crompton / Havells / Standa rd make shall be used.

TPN - 63 A, 415 V

TPN - 100 A, 415 V

TPN - 200 A, 415 V

TPN - 320 A, 415 V

TPN - 400 A, 415 V

TPN - 500 A, 415 V

Supply, fixing and connection of following Fuse base (HOLDERS) for HRC fuse link of M/HAVELL'S/L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge.

20 AMP ( H-Front/B_Bus Bar Connection ) -FOR FUSE TYPE HNS

32 AMP ( H-Front/B_Bus Bar Connection) -FOR FUSE TYPE HTIA

63 AMP ( H-Front/B_Bus Bar Connection) -FOR FUSE TYPE HTSS

100 AMP ( Front Connection) -FOR FUSE TYPE HTSD

100 AMP ( Open Type Fuse Base) -FOR FUSE TYPE CD-00

125 AMP ( Open Type Fuse Base) -FOR FUSE TYPE CD-00

250 AMP ( Open Type Fuse Base) -FOR FUSE TYPE CD-1

400 AMP ( Open Type Fuse Base) FOR FUSE TYPE CD-2

630 AMP ( Open Type Fuse Base) FOR FUSE TYPE CD-3

Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includ es Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc..

9W, LED Tube Light Fitting, 2FT, 230V AC

15W, Outdoor LED Light Fitting, IP55, 230V AC

40W LED Light/Lamp, 230V AC, 50Hz

45W, Flaimproof LED Light Fitting for hazardous area, 230V AC, 50Hz

120W LED Flood Light Fitting, with IP65, 230V AC, 50Hz

40W Flaimproof LED Well Glass Light Fitting, 230V AC, 50Hz

60W Ceiling Mounted LED Light Fitting

LED Light Driver of Flood Lights

125W Flaimproof IIA/IIB LED Flood Light Fighting, 230V AC, 50Hz

125W, Flaimproof FTG.EX-D,IIC, LED Flood Light Fighting 230V AC

120W Flaimproof LED Flood Light Fighting, 230V AC, 50Hz

150W Flaimproof LED Flood Light Fighting, 230V AC, 50Hz

56W, LED Street Light Fighting weatherproof, 230V AC, 50Hz

90W, LED Street Light Fighting weatherproof, 230V AC, 50Hz

Supply, fixing and connection of Philips/approved equivalent make LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , o perating voltage-Venture range-Venture of 150 to 265 Volts AC, P.F > 0.9, Surge-Venture protection: 2KV, THD<10% with high power LED 's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials a s per directions of Engineer-in-Charge.

Supply, fixing and connection of Philips/approved equivalent make LED Slim Panel Round /Square suitable for Recessed / Surface mou nting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 20 12 , operating voltaGE-Venture ranGE- Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete including supply & fix ing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Ch arge.

36/40W (600MMX600MM) SQUARE TYPE

Supply, fixing and connection of Philips/approved equivalent make LED COB Down lighter, suitable for Recessed mounting made of presssure diecast alluminium housing with powder coating, with high efficiency reflector , operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high power LED's having efficacy of > 120 lum ins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete including supply & fixing of lead in wire, nuts, bolts, scre ws etc. All complete with labour and materials as per directions of Engineer-in-Charge.

Supply & installation of elmex terminals supply and fixing and connecting elmex type terminals wherever required. job includes drill ing holes, providing and fixing clamps, nuts and bolts etc. suitable for terminating 2.5 mm2 copper conductor. job should be carried out as per drawing.( per terminal )

Supply and fixing and connecting channels for elmex type terminals wherever required. job includes drilling holes. provi ding and fixing clamps, nuts and bolts etc.

Supply, installation,testing and commissioning of occupancy sensor based on PIR technology-non regulated programmable

Supply, installation,testing and commissioning of occupancy sensor based on PIR technology-regulating programmable with day light di mming

Supply, installation,testing and commissioning of astronomical time switch (Electronic Timer) for single phase supply with 1 output per phase

Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / re cessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used.

1 x 1.5 sq.mm

Wiring for submain wiring with following sizes of FRLS PVC insulated, copper conductor, single core cable in recessed, PVC medium duty conduit as required. Note: Only ISI marked conduits & cables shall be used.

2 x 2.5 sqmm with 2.5 sqmm earth wire

2 x 4 sqmm with 4 sqmm earth wire

2 x 6 sqmm with 6 sqmm earth wire

2 x 10 sqmm with 6 sqmm earth wire

2 x 16 sqmm with 6 sqmm earth wire

2 x 25 sqmm with 6 sqmm earth wire

4 x 2.5 sqmm with 2x2.5 sqmm earth wire

4 x 4 sqmm with 2x4 sqmm earth wire

4 x 6 sqmm with 2x6 sqmm earth wire

4 x 10 sqmm with 2x6 sqmm earth wire

4 x 16 sqmm with 2x6 sqmm earth wire

3x25 + 1x16 sqmm

Supply and fixing of following size of steel conduit alongwith the accessories in recess including painting in case of surf ace conduit, or cutting the wall and making good the same in case of recessed, conduit as required. Note: Only ISI marked conduits shall be used.

Supply and fixing of following size of PVC conduit alongwith the accessories in recess including cutting the wall and maki ng good the same in case of recessed, conduit as required: Note: Only ISI marked conduits shall be used.

Providing and fixing following size of PVC casing and caping on surface as required. Note: Only ISI marked caping and casing shall be used.

15 mm x 10 mm

20 mm x 10 mm

25 mm x 10 mm

30 mm x 10 mm

40 mm x 20 mm

50 mm x 20 mm

Supply and fixing of metal box of following size (nominal) in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

75 mm x 75 mm x 60 mm deep

100 mm x 100 mm x 60 mm deep

150 mm x 75 mm x 60 mm deep

150 mm x 150 mm x 60 mm deep

180 mm x 100 mm x 60 mm deep

200 mm x 125 mm x 60 mm deep

200 mm x 150 mm x 60 mm deep

200 mm x 150 mm x 75 mm deep

200 mm x 250 mm x 75 mm deep

200 mm x 150 mm x 100 mm deep

200 mm x 250 mm x 100 mm deep

200 mm x 300 mm x 100 mm deep

250 mm x 300 mm x 100 mm deep

200 mm x 250 mm x 60 mm deep

200 mm x 300 mm x 60 mm deep

250 mm x 300 mm x 60 mm deep

Supply and fixing of wall / floor mounted metal board of welded construction, fabricated with minimum 50 mm x 50 mm x 6 mm angle iro n frame work, with horizontal and vertical intermediate members of suitable angle / flat iron for mounting of switch gears including painting etc. as required.

Supply and fixing of wall / floor mounted metal board of welded construction, fabricated with minimum 35 mm x 35 mm x 6 mm angle iro n frame work, with 25 mm x 6 mm flat iron as intermediate members including painting etc. as required.

Supply and fixing of wall mounted metal board of welded construction, fabricated with minimum 25 mm x 25 mm x 3 mm angle iron frame work, with 20 mm x 3 mm flat iron as intermediate members including painting etc. as required.

Supply and fixing wall mounted board of welded construction, fabricated with minimum 25 mm x 4 mm flat iron frame work , with intermediate members of same size including painting etc. as required.

Supply and fixing of Sunmica/Hylem sheet cover of required cutout for mounting on boards, DBs similar type of electrical ins tallation or wherever required as per directions of Engineer-in-Charge.. The job includes the finishing and mounting of the cutout sheet alongwith the supply of necessary hardwares, screws etc. All complete with labour and materials as per directions of Engineer -in- Charge. Minimum thickness of Hylem sheet shall be 2mm.

Supplying, installing, testing and commissioning of TPN tap off box of following capacity on the existing rising mains and complet e with HRC fuse links, interconnections, earthing etc. as required.

Supplying, installing, testing and commissioning of distribution tap off box of following capacity on existing rising main s and complete with HRC fuse links and interconnections, earthing etc. as required.

16 A TPN 2 way

16 A TPN 4 way

16 A TPN 6 way

16 A TPN 8 way

Supplying, installing, testing and commissioning of distribution tap off box of following capacity on existing rising main s and complete with HRC fuse links and interconnections, earthing etc. as required.

32 A TPN 2 way

32 A TPN 4 way

32 A TPN 6 way

Supplying, installing, testing and commissioning of distribution tap off box of following capacity on existing rising main s and complete with HRC fuse links and interconnections, earthing etc. as required.

63 A TPN 2 way

63 A TPN 4 way

63 A TPN 6 way

63 A TPN 8 way

Supplying, installing, testing and commissioning of distribution tap off box of following capacity on existing rising main s and complete with HRC fuse links and interconnections, earthing etc. as required.

100 A TPN 4 way

100 A TPN 6 way

100 A TPN 8 way

Supplying, installing, testing and commissioning of adopter box of following capacity on the existing rising mains, comple te with stands, cable end box, brass compression gland, interconnections, earthing etc.

Supplying, installation including suspension, testing and commissioning of triple pole and neutral SUNDRIES aluminium busbars in she et steel enclosure in convenient sections with top and bottom covers, suitable for use on 3 phase, 4 wire, 415 volts a.c. supply and of following rating complete with jointing of sections, electrical connections / interconnections, earthing with 2 runs of aluminiu m strips etc. complete as required.

Supplying and fixing busbar chamber with 2 strips busbars of length 300 mm, made of copper, suitable for 100 amps. capacity complete with all accessories including connections, earthing the body etc. as required.

Supplying and fixing busbar chamber with 4 strips busbars of length 300 mm, made of copper, suitable for 100 amps. capacity complete with all accessories including connections, earthing the body etc. as required.

Supplying and fixing busbar chamber with 4 strips busbars of length 600 mm, made of copper, suitable for capacity complete wi th all accessories including connections, earthing the body etc. as required.

Providing and fixing 16 amps. Metal clad, TP&N switch fuse unit, 415/500 volts, without H.R.C. fuses including drilling holes on th e board, connections, earthing the body etc. as required. Note: 1.ISI marked HRC fuses shall be used. 2.TPN of English Electric / L&T / Crompton / Havells / Standard /equivalent make shall be used as per direction of Engineer-in-Charg e.

Providing and fixing 32 amps. Metal clad, TP&N switch fuse unit, 415/500 volts, without H.R.C. fuses including drilling holes on th e board, connections, earthing the body etc. as required. 1.ISI marked HRC fuses shall be used. 2.TPN of English Electric / L&T / Crompton / Havells / Standard /equivalent make shall be used as per direction of Engineer-in-Charg e.

Providing and fixing 63 amps. Metal clad, TP&N switch fuse unit, 415/500 volts, without H.R.C. fuses including drilling holes on th e board, connections, earthing the body etc. as required. 1.ISI marked HRC fuses shall be used. 2.TPN of English Electric / L&T / Crompton / Havells / Standard /equivalent make shall be used as per direction of Engineer-in-Charg e.

Providing and fixing 100 amps. Metal clad, TP&N switch fuse unit, 415/500 volts, without H.R.C. fuses including drilling holes on t he board, connections, earthing the body etc. as required. 1.ISI marked HRC fuses shall be used. 2.TPN of English Electric / L&T / Crompton / Havells / Standard /equivalent make shall be used as per direction of Engineer-in-Charg e.

Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existi ng MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge.

Single pole

Single pole and neutral

Double pole

Triple pole

Triple pole and netural

Four pole

Supplying and fixing following rating, single pole & double pole isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used.

40 amps. Single Pole

63 amps. Single Pole

40 amps. Double Pole

63 amps. Double Pole

80 amps. Double Pole

100 amps. Double Pole

125 amps. Double Pole

Supplying and fixing following rating, three pole and four pole, 415 volts, isolator in the existing MCB DB complete with connection s, testing and commissioning etc. as required. Note: ISI marked isolato rs shall be used.

40 amps. Tripple Pole

63 amps. Tripple Pole

80 amps. Tripple Pole

100 amps. Tripple Pole

125 amps. Tripple Pole

40 amsp. Four Pole

63 amps. Four Pole

80 ams. Four Pole

100 amps. Four Pole

125 amps. Four Pole

Supplying and fixing following rating, double pole, (single phase neutral), 240 volts, residual current circuit breaker (RCCB/ELCB) , ISI marked, having a sensitivity current indicated miliamperes in the existing MCB DB complete with connections, testing an d commissioning etc. as required. Note: ISI marked RCCB/ELCB shall be used.

16 amps., 30 mA

16 amps, 100 mA

16 amps,, 300 mA

25 amps., 30 mA

25 amps, 100 mA

25 amps,, 300 mA

32 amps., 30 mA

32 amps, 100 mA

32 amps,, 300 mA

40 amps., 30 mA

40 amps, 100 mA

40 amps,, 300 mA

63 amps., 30 mA

63 amps, 100 mA

63 amps,, 300 mA

Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB /ELCB), ISI marked, having a sensitivity current upto indicated milliamperes in the existing MCB DB complete with connections, test ing and commissioning etc. as required. Note: ISI marked RCCB/ELCB shall be used.

25 amps., 30 mA

25 amps, 100 mA

25 amps,, 300 mA

40 amps., 30 mA

40 amps, 100 mA

40 amps,, 300 mA

63 amps., 30 mA

63 amps, 100 mA

63 amps,, 300 mA

Supplying and fixing 10 amps., 240volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwi th 10 amps. C curve, SP,MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Note: ISI marked sockets shall be used.

Supplying and fixing 20 amps., 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongw ith 20 amps. C curve, SP,MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Note:ISI marked sockets shall be used.

Supplying and fixing 20 amps., TPN, industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps . C Curve, TPMCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete wit h connections, testing and commissioning etc. as required. Note: ISI marked sockets shall be used.

Supplying and fixing 30 amps., TPN, industrial type socket outlet, with 4 pole and earth metal enclosed, plug top, alongwith 30 amp s., C curve, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complet e with connections, testing and commissioning etc. as required. Note: ISI marked sockets shall be used.

Supplying and fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral link, eachrth bar, din, bar, detachable gland p late, interconnections, including painting earthing etc.as required as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge.

Supplying and fixing of following way, prewired single pole and neutral sheet steel MCB consumer unit, 240 volts, o n surface / recess complete with tinned copper busbar, neutral link, earth bar, din bar, hinged front cover for the MCB k nobs, detachable gland plate, inter connections including painting, earthing etc. as required (with IP 43 protection and metal door) and as per direction of Engineer-in-Charge.

Supplying and fixing of following way, prewired single pole and neutral sheet steel MCB consumer unit, 240 volts, on surface / recess complete with tinned copper busbar, neutral link, earth bar, din bar, hinged front accrylic cover for the MCB knobs, detachable gland plate, inter connections including painting, earthing etc. as required (with IP 42 protection and accrylic door) and as per direction of Engineer in-Charge.

4 Way (2+2+2 way)

Supplying and fixing of following way, prewired single pole and neutral sheet steel MCB consumer unit, 240 volts, on surface / reces s complete with tinned copper busbar, neutral link, earth bar, din bar, hinged front accrylic cover for the MCB knobs, detachable gl and plate, inter connections including painting, earthing etc. as required (with IP 54 protection).

Supplying and fixing following way, three pole and neutral, sheet MCB distribution board, 415 volts, on surface/recess, complete wit h tinned copper busbars, neutral link, eachrth bar, din bar, detachable gland plate, interconnections, including painting, earthing etc. as required.

Supplying and fixing of following way three pole and neutral sheet steel MCB distribution board, 240 volts, on surface / rec ess complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, inter connections including painti ng, earthing etc. as required (with IP 43 protection - metal door).

Supplying and fixing of following way three pole and neutral sheet steel MCB distribution board, 240 volts, on surface / rec ess complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, inter connections including painti ng, earthing etc. as required (with IP 42 protection - accrylic door).

Supplying and fixing of following way three pole and neutral sheet steel MCB distribution board, 240 volts, on surface / rec ess complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, inter connections including painti ng, earthing etc. as required (with IP 54 protection).

Supplying, installation, testing and commissioning of surface/recess mounting, vertical type, compartmentalised, 415 volts, T PN MCB distribution board of sheet steel, 1.6 mm. thick, dust protected, duly phosphatized and painted, inclusive of 200 amps. tin ned copper busbars, eachrth bar, common neutral link, din bar for mounting MCB's detachable gland/knock out plates and with built in loose wire box, and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of P VC insulated copper wires between the busbars and the MCB's as well as the incomer and upto the terminal connectors/ neutral link an d reachdy for installation, of following ways (but without MCB's and incomer) as required with IP 20 protection.

Supplying, installation, testing and commissioning of surface/recess mounting, vertical type, compartmentalised, 415 volts, T PN MCB distribution board of sheet steel, 1.6 mm. thick, dust protected, duly phosphatized and painted, inclusive of 200 amps. tin ned copper busbars, eachrth bar, common neutral link, din bar for mounting MCB's detachable gland/knock out plates and with built in loose wire box, and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of P VC insulated copper wires between the busbars and the MCB's as well as the incomer and upto the terminal connectors/ neutral link an d reachdy for installation, of following ways (but without MCB's and incomer) with IP 43 protection plus metal door as required.

Supplying, installation, testing and commissioning of surface/recess mounting, vertical type, compartmentalised, 415 volts, T PN MCB distribution board of sheet steel, 1.6 mm. thick, dust protected, duly phosphatized and painted, inclusive of 200 amps. tin ned copper busbars, eachrth bar, common neutral link, din bar for mounting MCB's detachable gland/knock out plates and with built in loose wire box, and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of P VC insulated copper wires between the busbars and the MCB's as well as the incomer and upto the terminal connectors/ neutral link an d reachdy for installation, of following ways (but without MCB's and incomer) as required with IP 42 protection plus accrylic door.

Supplying, installation, testing and commissioning of surface/recess mounting, vertical type, compartmentalised, 415 volts, TP N MCB distribution board of sheet steel, 1.6 mm. thick, dust protected, duly phosphatized and painted, inclusive of 200 amps. tinned copper busbars, eachrth bar, common neutral link, din bar for mounting MCB's detachable gland/knock out plates and with built in lo ose wire box, and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of PVC insulated copper wires between the busbars and the MCB's as well as the incomer and upto the terminal connectors/ neutral link and r eachdy for installation, of following ways (but without MCB's and incomer) as required with IP 54 protection.

ERECTION OF TRANSFORMER

Transformer UPTO 3MT

Tranformer >3MT, <25 MT

Erection, testing and commissioning of panel, motor and any other equipment on existing foundation including carriage from Stores to the site, unpacking, placing on foundation, levelling, fixing and fitting of all components, making necessary connections, phase ch ecking, meggering as necessary all complete with labour and materials as per the direction of Engineer-in-charge.

Small equipment requiring tractor trailer but not requiring crane / hydra etc. (beyond 100 kg.)

Equipment, Panels,motor etc. weighing above 500 kg and requiring hydra and tractor trolley etc.but <3MT

Equipment, Panels,motor etc.weighing more than 3 MT and requiring crane and tractor trolley but <25MT

Supply and installation of "Caution Boards" MV-200 mm X 150 mm / HV- 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and v itreous enameled white on both sides, and with inscription in single red colour on front side as required.at sub-stations as per IS2 551/upto date including supply of necessary clamps, nuts, bolts and other hardware. All complete with labour and materials as per th e direction of the Engineer-in-Charge

Supply and fixing of First-Aid boxes as per IE Rules, 1956 Clause 43(2), including necessary clamps, bolts, rawl plugs, etc. breachk ing and making good the walls if required. All complete with labour and materials as per the direction of Engineer-in-Charg

FIRE BUCKETS AND STAND

Supply of floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint as per direction of Engineer-in-Charge.

Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handl e at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and a rranged to existing stand or hook as per direction of Engineer-in-Charge.

Supplying and erection of Push Button Station/Control Station with MS channel grouted with PCC including excavation alignment,e rection and connection of Push Button, connection of control cable, earthing including supply and fixing of saddles, nuts, bolts et c. and painting wth two coats of bituminous aluminium paint/synthetic enamel paint over a coat of red oxide primer all complete with labour and materials as per drawing and the direction of Engineer-in- Charge (Push Button will be supplied by Owner )

Supply and erection of 250 mm x 380 mm 340 mm deep at top and 120 mm deep at bottom canopies made out of 2 mm thick sheet for mount ing on Push Button Stations support to render them weachther proof including fabrication, mechanical assembly and supply and fixing of screws, nuts, bolts etc. and painting with 2 coats of bituminous aluminium synthetic enamel paint over a coat of red oxide primer all complete with labour and materials as per the direction of Engineer-in-Charge

Supply and installation of L&T / Siemens OR equivalent make DOL / Star-Delta motor starter (WITH ALL ACESSARIES INCLUDING O/L RELAY/ TIMERS ETC.) conforming to IS:13947-4 on walls/steel structure, connection of cables all complete with labour and materials as per direction of the Engineer-in-Charge.

UPTO 5.5KW, DOL

7.5KW , DOL

11KW , Star-Delta

15KW, Star Delta

18.5KW, Star Delta

22KW , Star Delta

30KW , Star Delta

37KW , Star Delta

45KW , Star Delta

Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge

Control contactors- 4 contacts for AC control standard coil voltage - 25, 110, 240, 415, 50Hz Type MX0 of L&T or equivalent

Control contactors- 8 contacts for AC control standard coil voltage - 25, 110, 240, 415, 50Hz Type MX0 of L&T or equivalent.

Control contactors- 4 contacts for DC control standard coil voltage - 24, 110, 220 Type MX0 of L&T or equivalent

Control contactors- 4 contacts for DC control standard coil voltage - 24, 110, 220 Type MN0 of L&T or equivalent.

Power Contactor (with 1NO + 1NC)- Upto 25 Amp (AC3) for AC standard coil voltage - 110, 220, 240, 415 V, 50Hz Type MNX25 of L&T or e quivalent

Power Contactor (Upto 2NO + 2 NC)- Above 25 Amp but upto 45 Amp (AC3) for AC standard coil voltage - 110, 220, 240, 415 V, 50Hz Type MNX45 of L&T or equivalent

Power Contactor (Upto 2NO + 2 NC)- Above 45 Amp but upto 140 Amp (AC3) for AC standard coil voltage - 110, 220, 240, 415 V, 50Hz Typ e MNX140 of L&T or equivalent

Power Contactor (Upto 2NO + 2 NC)- Above 140 Amp but upto 400 Amp (AC3) for AC standard coil voltage - 110, 220, 240, 415 V, 50Hz Ty pe MNX400 of L&T or equivalent

Power Contactor (Upto 2NO + 2 NC)- 25 Amp (AC3) for AC standard coil voltage - 110, 230, 415 V, 50Hz Type ML1.5 of L&T or equivalent

Power Contactor (Upto 2NO + 2 NC)- 32 Amp (AC3) for AC standard coil voltage - 110, 230, 415 V, 50Hz Type ML2 of L&T or equivalent

Power Contactor (Upto 2NO + 2 NC)- 40 Amp (AC3) for AC standard coil voltage - 110, 230, 415 V, 50Hz Type ML3 of L&T or equivalent

Power Contactor (Upto 2NO + 2 NC)- 70 Amp (AC3) for AC standard coil voltage - 110, 230, 415 V, 50Hz Type ML4 of L&T or equivalent

Power Contactor (Upto 2NO + 2 NC)- 110 Amp (AC3) for AC standard coil voltage - 110, 230, 415 V, 50Hz Type ML6 of L&T or equivalent

Thermal Relays type L&T MN2 or equivalent with single phasing protection - 0.2 - 0.33 A to 0.6-1.0 A (Direct operated)

Thermal Relays type L&T MN2 or equivalent with single phasing protection - 20-33 A (Direct operated)

Thermal Relays type L&T MN5 or equivalent with single phasing protection - 45-75 A (Direct operated)

Thermal Relays type L&T MN12 or equivalent, 42 - 69 A to 90 - 150 A (CT operated) with separate mounting

Thermal Relays type ML0/ML1/ML1.5 - 0.15 - 0.25 A to 10.0 - 16.0 A (Direct operated) contractor

Thermal Relays type ML2/ML3 - 9.0 - 14.0 A to 28.0 - 42.0 A (Direct operated) contractor

Mushroom actuator with holder pushbutton, Type:3SB, SIEMENS or equivalent as per direction of Engineer-in- charge.

Automatic AC ammeter (Automatic Electric make or approved equivalent) 96 mm x 96 mm square type block backalite case/flush mo unting/moving iron/spring controlled suppressed scale, CT operated AC ammeter/range 0-300- 1800 A, CT ratio 300/IA/accuracy +/-2.5%.

Automatic AC Volt meter (Automatic Electric make or approved equivalent) 96 mm x 96 mm square type block backalite case/flush mounting AC Volt meter/range 0-600 accuracy +/-2.5%.

Thermal Relays type L&T MN2 or equivalent with single phasing protection - 0.9 - 1.5 A to 6.0-10.0 A (Direct operated) as per direc tion of Engineer-in-Charge.

Thermal Relays type L&T MN2 or equivalent with single phasing protection - 9.0 - 15.0 A (Direct operated) as per direction of Engin eer-in-Charge.

Thermal Relays type L&T MN2 or equivalent with single phasing protection - 14 - 23.0 A (Direct operated) as per direction of Engine er-in-Charge.

Thermal Relays type L&T MN5 or equivalent with single phasing protection - 30-50 A (Direct operated) as per direction of Engineer-in-Charge.

Thermal Relays type L&T MN5 or equivalent with single phasing protection - 66-110 A (Direct operated) as per direction of Engineer-i n-Charge.

WITH 25X3 MM CU BUSBARS

WITH 25X6 MM CU BUSBARS

WITH 40X6 MM CU BUSBARS

Supply & Installation of feeder pillars of GI sheet of 14SWG of depth 600 to 800 mm, placing on foundation including suppl y of bolts, making arrangments for fixing of switch fuse unit / contactor etc all complete including labour and materials as p er drawing and direction of the Engineer-in-Charge. Note: 1.Only front area will be measured and paid. 2.Foundation shall be paid under separate item. 3.Switch fuse unit/contactor etc. shall be paid under separate item.

PLUG- 2 POLE+ EARTH, 250V- 10 AMP

PLUG- 2 POLE+ EARTH, 250V- 20 AMP

PLUG- 3 POLE+ EARTH, 440V- 10 AMP

PLUG- 3 POLE+ EARTH, 440V- 20 AMP

SOCKET- 2 POLE+ EARTH, 250V- 10 AMP

SOCKET- 2 POLE+ EARTH, 250V- 20 AMP

SOCKET- 3 POLE+ EARTH, 440V- 10 AMP

SOCKET- 3 POLE+ EARTH, 440V- 20 AMP

Supply, fixing and connection of following inusterial type plugs / sockets (confirming to IS/IEC-309) of M/S HAVELL/L&T /G EC Asthol m/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Eng ineer-in-charge.

Supply and fixing of led indication lamp in the panels. leds shall be provided with leakage voltage protection upto 40v. Operating v oltage shall be 110V / 220V / 230V /AC /DC, Panel cutouts shall be 22.5 / 25.5 / 30.5 mm. Terminals shall be shrouded for finger pro ofing and safety are with captivated washers to hold two lugged (fork / pin) wires in one terminal. Job includes supply of labor and various undry materials required and finally testing of led's for + following ed's

Red / yellow / amber / green / milky white led's

Blue led

Supply of TPN, switch disconnector fuse unit (panel mounted type) of following rating with ISI marked HRC fuses as per direc tion of Engineer-in-Charge.

Supply of TPN, switch fuse unit (panel mounted type) of following rating with ISI marked HRC fuses as per direction of Engineer-in-Charge.

Supply of following rating and breaking capacity 3 pole MCCB with thermomagnetic release alongwith terminal spreaders as per direc tion of Engineer-in-Charge.

200 Amps, 16kA

200 Amps, 25kA

100 Amps, 16kA

150 Amps, 16kA

250 Amps, 25kA

125 Amps, 16kA

250 Amps, 35kA

315 Amps, 35kA

400 Amps, 35kA

500 Amps, 35kA

630 Amps, 50kA

800 Amps, 50kA

Supply of following rating and breaking capacity 4 pole MCCB with thermomagnetic release along with terminal spreaders as per direct ion of Engineer-in-Charge.

100 Amps, 30kA

125 Amps, 36kA

200 Amps, 36 kA

250 Amps, 36kA

250 Amps, 50kA

400 Amps, 50kA

630 Amps, 50kA

Supplying following way,single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete wit h tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge.

2+2 way, SPN, single door, MCB DB, IP-30

2+4 way, SPN, single door, MCB DB, IP-30

2+6 way, SPN, single door, MCB DB, IP-30

2+8 way, SPN, single door, MCB DB,IP-30

2+10 way, SPN, single door, MCB DB

2+12 way, SPN, single door, MCB DB,IP-30

6 way, SPN, double door, MCB DB, IP-43

8 way, SPN, double door, MCB DB, IP-43

12 way, SPN, double door, MCB DB, IP-43

14 way, SPN, double door, MCB DB, IP-43

4 way (2+2+2), SPN, double door with acrylic door cover, MCB DB, IP-42

8 way (2+2+6), SPN, double door with acrylic door cover, MCB DB, IP-42

12 way (2+2+10), SPN, double door with acrylic door cover, MCB DB, IP-42

4 way (2+2+2), SPN, double door, MCB DB, IP-54

8 way (2+2+6), SPN, double door, MCB DB, IP-54

12 way (2+2+10), SPN, double door, MCB DB, IP-54

Sheet steel DP MCB enclosure

Sheet steel TP MCB enclosure

Supplying following way,horizontal type,TPN, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But wi thout MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 with provision for 1 no. 4 pole MCB & 1 no. 4 pole ELCB/R CCB/ELCB incomer and as per direction of Engineer-in-Charge.

(8 +12) 4 Way TPN DB Horizontal with IP 30

(8 +18) 6 Way TPN DB Horizontal with IP 30

(8 +12) 4 Way TPN DB Horizontal with IP 43

(8 +18) 6 Way TPN DB Horizontal with IP 43, 18 Nos

(8 +24) 8 Way TPN DB Horizontal with IP 43

Supplying following way,horizontal type,TPN, sheet steel, MCB distribution board, 415 V, with acrylic door cover, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnection s, powder painted etc. as required. (But without MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per di rection of Engineer-in-Charge.

(8 +12) 4 Way TPN DB Horizontal with IP 42

(8 +18) 6 Way TPN DB Horizontal with IP 42

(8 +24) 8 Way TPN DB Horizontal with IP 42

(8 +36) 12 Way TPN DB Horizontal with IP 42

Supplying following way,horizontal type,TPN, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But wi thout MCB/RCCB/ELCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 with provision for 1 no. 4 pole MCB & 1 no. 4 pole ELCB/R CCB/ELCB incomer and as per direction of Engineer-in-Charge.

(8 +12) 4 Way TPN DB Horizontal double door with IP 54

(8 +18) 6 Way TPN DB Horizontal double door with IP 54

(8 +24) 8 Way TPN DB Horizontal double door with IP 54

(8 +36) 12 Way TPN DB Horizontal double door with IP 54

Supplying following way,vertical, three pole and neutral, sheet steel, MCB distribution board, 415V, dust protected, d uly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting M CBs (but without MCBs and incomer ) as required as per IS 8623; IS 13032; IEC 61439 3 and as per direction of Engineer-in-Charg e.

4 way (4+4+12), TPN, vertical type, MCB DB, double door, IP-43

8 way (4+4+24), TPN, vertical type, MCB DB, double door, IP-43

12 way (4+4+36), TPN, vertical type, MCB DB, double door, IP-43

Supplying following way,vertical, three pole and neutral, sheet steel, MCB distribution board, 415 V, with acrylic door cover, IP-42/43, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge.

4 way (4+4+12), TPN, vertical type, MCB DB, double door, IP-42

8 way (4+4+24), TPN, vertical type, MCB DB, double door, IP-42

12 way (4+4+36), TPN, vertical type, MCB DB, double door, IP-42

6 way (4+4+4+18), TPN, vertical type, MCB DB, double door, IP-43

Supplying following way,vertical, three pole and neutral, sheet steel, MCB distribution board, 415 V, with metal double door , IP-54, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Eng ineer-in-Charge.

4 way (4+4+12), TPN, vertical type, MCB DB, double door, IP-54

8 way (4+4+24), TPN, vertical type, MCB DB, double door, IP-54

12 way (4+4+36), TPN, vertical type, MCB DB, double door, IP-54

Providing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous en ameled white on both sides, and with inscription in single red colour on front side as required as per direction of Engine er-in-Charge..

Providing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous en ameled white on both sides, and with inscription in single red colour on front side as required as per direction of Engine er-in-Charge.

Supply of First Aid box 18" x 12" x 8" as per IE Rules, 1956 Clause 43(2)as per direction of Engineer-in-Charge.

Supply of Off load Changeover Switch in sheet steel enclosure as per IS:13947 of following rating as per direction of Engineer-in-Charge

32 Amps 240V 2 pole

63 Amps 415 V four pole

100 Amps 415 V four pole

Supply of power contactor, 3 Pole, AC 3 Duty, 240 VAC, 50 Hz coil of following rating as per direction of Engineer -in-Charge:

25 Amps, L&T MNX25 or equivalent

32 Amps, L&T MNX32 or equivalent

45 Amps, L&T MNX45 or equivalent

70 Amps, L&T MNX70 or equivalent

95 Amps, L&T MNX95 or equivalent

140 Amps, L&T MNX140 or equivalent

400 Amps, L&T MNX400 or equivalent

25 Amps, L&T ML1.5 or equivalent

32 Amps, L&T ML2 or equivalent

Power contactor, 4 pole, 200A, L&T MCX 33, 2 NO+2 NC, Coil voltage:240 V AC, Cat no: CS 97021

Supply of Bimetal overload relay of following rating, make L&T MN-2 or equivalent as per direction of Enginee r-in-Charge:

0.2 - 0.33 Amps to 0.6-1.0 Amps

0.9-1.5Amp to 6-10 Amps

Supply of Bimetal overload relay of following rating, make L&T MN-5 or equivalent as per direction of Enginee r-in-Charge:

Supply of Bimetal CT operated relay range 90- 150 Amp, L&T make MN -12 or equivalent

Supply of Bimetal overload relay, Range 6-10 Amps, for L&T make ML1.5 contactor or equivalent

Supply of Bimetal overload relay, Range 9-14 Amps, for L&T make ML 2/3 contactor or equivalent

Supply of Spare Contact Kit for contactors of following type as per direction of Engineer-in-Charge:

Power contactor L&T ML1.5 or equivalent.

Power contactor L&T ML2 or equivalent.

Power contactor L&T ML3 or equivalent.

Power contactor L&T MNX 32 or equivalent.

Power contactor L&T MNX 40 or equivalent.

Power contactor L&T MNX 70 or equivalent.

Supply of Spare coil for contactors of following type as per direction of Engineer-in-Charge:

L&T ML1.5, Cat No. SS90873 or equivalent

L&T ML2/3, Cat No. SS90545 or equivalent

L&T MNX70, Cat No. CS94192 or equivalent

Supply of Add on auxiliary contact block for contactors of following type as per direction of Engineer-in-Charge:

L&T MNX 9-80, front mounting, 2NO+2NC, Cat No. CS94114 or equivalent

L&T MX-A1 front mounting, 2NO+2NC, Cat No. CS94035 or equivalent

Supply of Fuse Base of following types as per direction of Engineer-in-Charge:

Fuse Base L&T HD32B Cat No. ST30735 or equivalent

Fuse Base L&T HK63B cat No. ST30763 or equivalent

Fuse Base L&T HK125B cat No. ST30771 or equivalent

Supply of Heavy Duty Power capacitor,440V & Controller for use in APFC panel as per direction of Engineer-in-Charge.

Automatic Power Factor Controller,12 stage or more

Supply of spares for Air Circuit Breaker , L&T make C Power or equivalent as per direction of Engineer-in-Charge.

Shunt Release for L&T make C-Power ACB, 240/415V

Under Voltage Release for L&T C-Power ACB, 240/415V

Closing coil for L&T C-Power ACB, 240/415V

Spring charging motor for L&T C-Power ACB, 240/415V

Motor cut-off limit switch for L&T C-Power ACB, 240/415V

Current transformer for L&T C-Power ACB, 800 Amps

Supply of three phase digital ammeter, 0-1000A, 1/5 A,Class- 0.5, 240VAC aux supply as per direction of Engineer-in-Charge.

Supply of Three phase digital voltmeter, Class-0.5, 240VAC aux supply as per direction of Engineer-in-Charge.

Supply of Contact multiplier relay, OMRON MY2N, 5A, 240V AC, 2 C/O contacts or equivalent as per direction of Engineer in-Charge.

Supply of SMPS, Input 230VAC, Output 12VDC, 2A as per direction of Engineer-in-Charge.

Supply of LED indication lamps for panel indications red/green/yellow/white etc. 240VAC as per direction of Engineer-in-Charge.

Supply of HRC, DIN type fuse link of following rating & size

20-32 Amps, Size 000

50 Amps, Size 000

63 Amps, Size 000

80/100 Amps, Size 000

125 amps, Size 00

125 Amps, Size 1

160/200 Amps, Size 1

315 / 400 Amps, size 2

315/400 Amps, size 3

500 Amps, Size 3

630 Amps, Size 3

800 Amps, Size 3

Supply of HRC bolted type fuse links

2-16 Amps, L&T HG type, size F1 or equivalent

20-32 Amps, L&T HG type, size F1 or equivalent

20-32 Amps, L&T, HQ type, size A1L or equivalent

50-63 Amps, L&T, HQ type, size A1L or equivalent

4-32 Amps, L&T, HQ type, size A2 or equivalent

35-63 Amps, L&T, HQ type, size A3 or equivalent

80-100 Amps, L&T, HQ type,size A4 or equivalent

125-160 Amps, L&T, HQ type, size A4 or equivalent

80-100 Amps, L&T, HQ type, size B1 or equivalent

125 Amps, L&T, HQ type, size B1 or equivalent

125-200 amps, L&T, HQ type size B2 or equivalent

250-315 Amps, L&T, HQ type,size B3 or equivalent

355-400 Amps, L&T, HQ type, size B4 or equivalent

400 Amps, L&T HQ type, size C2 or equivalent

500 Amps, L&T HQ type, size C2 or equivalent

630 Amps, L&THQ type, size C2 or equivalent

Supply of spreader terminals for MCCBs (make L&T or equivalent) of following rating & type.

125/250 Amps, 3 Pole

400 Amps, 3 Pole

630 Amps, 3 Pole

250 Amps, 4 Pole

400 Amps, 4 Pole

Supply of rotary handle (extended ROM) for MCCBs (make L&T or equivalent) of following rating

Supply of accessories for transformers

Supply & replacement of OTI as per direction of Engineer-in- Charge.

Supply & replacement of Buchholz relay as per direction of Engineer-in-Charge.

Supply, fixing, installation of Breather Unit without silicagel suitable for upto 750gm silicagel as per direction of Engineer-in-Ch arge.

Supply, fixing, installation of Breather Unit without silicagel suitable for upto 1000gm silicagel as per direction of Engineer-in-C harge.

Supply, fixing, installation of Breather Unit without silicagel suitable for upto 1500gm silicagel as per direction of Engineer-in-C harge.

Supply & Replacement of silica gel in transformers as per direction of Engineer-in-Charge.

Supply ,fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and / or fix to steel / RCC col umns, beams, or any other structure members with MS suspenders, angles, channels etc. complete as per the direction of Engineer-in C harge

100 mm x 25 mm x 2 mm

150 mm x 25 mm x 2 mm

200 mm x 25 mm x 2 mm

300 mm x 25 mm x 2 mm

450 mm x 25 mm x 2 mm

600 mm x 25 mm x 2 mm

100 mm x 40 mm x 2 mm

150 mm x 40 mm x 2 mm

200 mm x 40 mm x 2 mm

300 mm x 40 mm x 2 mm

450 mm x 40 mm x 2 mm

600 mm x40 mm x 2 mm

750 mm x40 mm x 2 mm

150 mm x 50 mm x 2 mm

200 mm x 50 mm x 2 mm

300 mm x 50 mm x 2 mm

450 mm x 50 mm x 2 mm

750 mm x 50 mm x 2 mm

900 mm x 50 mm x 2 mm

150 mm x 75 mm x 2 mm

300 mm x 75 mm x 2 mm

450 mm x 75 mm x 2 mm

600 mm x 75 mm x 2 mm

150 mm x 100 mm x 2 mm

300 mm x 100 mm x 2 mm

450 mm x 100 mm x 2 mm

600 mm x 100 mm x 2 mm

Providing and laying medium quality, Class-B galvanised steel pipes of Tata / Jindal or approved equivalent make conforming to IS-12 39 [Part-I] in underground trenches, on steel, concrete or similar structures including cutting, threading, bending, supply & instal lation of supports, clamps, small iron structures, spacer, seats, plugs, bush, fittings / fixtures like bends, tees, nipples, reduce rs etc. all complete as per specification, drawing and direction of Engineer-in- charge. Item includes sealing of pipe ends & joints with bushes and bitumen based fillings and such other miscellaneous works so as to make piping water tight.

25 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing end termination of power/control cable including cutting, stripping, fixing lugs, crimping/soldering, with cast resin end termination, restoration of insulation/clamping of cable, tagging with aluminium tag, earthing of armour, connection to the equipmen t terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in-charge.

3 x 10 sqmm

3 x 16 sqmm

3 x 25 sqmm

3 x 35 sqmm

3 x 50 sqmm

3 x 70 sqmm

3 x 95 sqmm

3 x 120 sqmm

3 x 185 sqmm

3 x 240 sqmm

3 x 400 sqmm

3 - 1/2 x 10 sqmm

3 - 1/2 x16 sqmm

3 - 1/2 x 25 sqmm

3 - 1/2 x 35 sqmm

3 - 1/2 x 50 sqmm

3 - 1/2 x 70 sqmm

3 - 1/2 x 95 sqmm

3 - 1/2 x 120 sqmm

3 - 1/2 x 150 sqmm

3 - 1/2 x 185 sqmm

3 - 1/2 x 225 sqmm

3 - 1/2 x 240 sqmm

3 - 1/2 x 300 sqmm

3 - 1/2 x 400 sqmm

Providing end termination of power/control cable including cutting, stripping, providing & fixing heavy duty type lugs, cable insula tion, providing & glanding single compression heavy duty brass cable gland conforming to IS-12943 (Dowell's or apporved equivalen t), wherever specified, providing heavy duty type aluminium lugs for power cables and copper lugs/connectors for control cables, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagging with aluminium tag,earthing of armou r, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-i n-Charge.

3 x 10 sqmm

3 x 16 sqmm

3 x 25 sqmm

3 x 35 sqmm

3 x 50 sqmm

3 x 70 sqmm

3 x 95 sqmm

3 x 120 sqmm

3 x 150 sqmm

3 x 185 sqmm

3 x 240 sqmm

3 x 300 sqmm

3 x 400 sqmm

3-1/2 x 25 sqmm

3-1/2 x 35 sqmm

3-1/2 x 50 sqmm

3-1/2 x 95 sqmm

3-1/2 x 120 sqmm

3-1/2 x 185 sqmm

3-1/2 x 225 sqmm

3-1/2 x 240 sqmm

3-1/2 x 300 sqmm

3-1/2 x 400 sqmm

Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell's or approved equivalent) , wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, tagg ing with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the Engineer-in- charge

3 x 10 sqmm

3 x 16 sqmm

3 x 25 sqmm

3 x 35 sqmm

3 x 50 sqmm

3 x 70 sqmm

3 x 95 sqmm

3 x 120 sqmm

3 x 150 sqmm

3 x 185 sqmm

3 x 225 sqmm

3 x 240 sqmm

3 x 300 sqmm

3 x 400 sqmm

4 x 10 sqmm

4 x 16 sqmm

7 x 2.5 sqmm LT control cables with copper lugs

7 x 2.5 sqmm LT control cables with copper lugs

4 x 10 sqmm

4 x 16 sqmm

3-1/2 x 25 sqmm

3-1/2 x 35 sqmm

3-1/2 x 50 sqmm

3-1/2 x 70 sqmm

3-1/2 x 95 sqmm

3-1/2 x 120 sqmm

3-1/2 x 150 sqmm

3-1/2 x 185 sqmm

3-1/2 x 225 sqmm

3-1/2 x 240 sqmm

3-1/2 x 300 sqmm

3-1/2 x 400 sqmm

Making straight through joints for medium voltage PVC armoured power & control cables (upto 1.1 KV grade) including cutting, strippi ng of cable insulation, including supply of heat shrinkable TUBULAR straight through cable jointing kit of Raychem / CCI / app roved equivalent make with ferrules. All complete with labour and materials as per drawings, specifications and directions of Engine er in-charge.

Upto 3 / 3.5 / 4 x 6 sqmm

3 / 3.5 / 4 x 10 sqmm

3 / 3.5 / 4 x 16 sqmm

3 / 3.5 / 4 x 25 sqmm

3 / 3.5 / 4 x 35 sqmm

3 / 3.5 / 4 x 50 sqmm

3 / 3.5 / 4 x 70 sqmm

3 / 3.5 / 4 x 95 sqmm

3 / 3.5 / 4 x 120 sqmm

3 / 3.5 / 4 x 150 sqmm

3 / 3.5 / 4 x 185 sqmm

3 / 3.5 / 4 x 225 sqmm

3 / 3.5 / 4 x 240 sqmm

3 / 3.5 / 4 x 300 sqmm

3 / 3.5 / 4 x 400 sqmm

Providing end termination of power cable including cutting, stripping, providing & fixing of lugs, cable insulation, providin g aluminium lugs, crimping/soldering, as necessary, restoration of insulation/ clamping of cable, tagging with aluminium tag,earthi ng of armour, connection to the equipment terminals etc. all complete with labour including travel,transportation, boarding and lodg ing of the cable jointer and materials as per standard and direction of the Engineer-in-charge.

3 x 120 sqmm

3 x 150 sqmm

3 x 185 sqmm

3 x 240 sqmm

3 x 300 sqmm

3 x 400 sqmm

Providing end termination of power cable including cutting, stripping, providing & fixing of lugs, cable insulation, providi ng & glanding single/double compression heavy duty brass cable gland conforming to IS-12943 , providing aluminium lugs, crimpin g/soldering, as necessary, restoration of insulation/ clamping of cable, tagging with aluminium tag,earthing of armour, connection t o the equipment terminals etc. all complete with labour including travel,transportation, boarding and lodging of the cable jointer and materials as per standard and direction of the Engineer-in-Charge.

3 x 120 sqmm

3 x 150 sqmm

3 x 185 sqmm

3 x 240 sqmm

3 x 300 sqmm

3 x 400 sqmm

Making straight through cable joint for power (PVC/XLPE) armoured cable and following sizes and grade including c utting, stripping of cable insulation all complete with labour including travel,transportation, boarding and lodging of the cable jointer and materials excluding cost of jointing kit as per standard and direction of the Engineer-in-Charge.

3 x 120 sqmm

3 x 150 sqmm

3 x 185 sqmm

3 x 240 sqmm

3 x 300 sqmm

3 x 400 sqmm

Supply of copper tube terminal heavy duty (crimping cable lug) of KSE / Dowells make or equivalent certified by EIC. of the followin g sizes.

Supply of aluminium tube terminal heavy duty (crimping cable lug) of KSE / Dowells make or equivalent certified by EIC. of the follo wing sizes.

Supply of CMRS / CCE approved flameproof double compression (brass) cable gland for following overall cable sizes as pe r directions of Engineer-in-Charge.

Supply of single compression (brass) heavy duty type cable gland for following over all cable sizes as per directions of E ngineer-in-Charge.

Removal of bricks from cable trench without any damage to the cable and disposing it within a lead of 50 meteres or stacking it at t he edge of the trench and putting it back into the same trench or in a new cable trench as per drawing/ specification within a lead of 50 meteres after the work is completed including completing the work in allrespects with all labour and materials as per the dir ection of the Engineer- in-Charge.

Removal and relaying

Removal and stacking only

Removal of sand from cable trench without any damage to the cable and disposing it within a lead of 50 meteres or putting it back i nto the same trench or in a new cable trench as per drawing within a lead of 50 meteres all complete with labour and materials as pe r the direction of the Engineer-in-Charge.

Removal of rcc slab upto 150 mm thick and of any size placed above the cable trench, handling carefully without any damage of the s lab and cable beneath it and keeping it back in position after laying / removing the cable and sealing the same between rcc cove rs with cement & sand. job complete in all respect with labours and materials and as per direction of engineer -in-charge.

Dismantling of switch fuse unit/fuse gear unit/DB/any other control without using heavy lifting equipments without any damage and returning it to our Stores all complete with labour and materials as per the direction of the Engineer-in- Charge.

Upto and including 10 Kg

Above 10 Kg and upto 50 Kg

Above 50 Kg and upto 100 Kg

Demolishing concrete and disposal of material within 50 metres lead:

1:3:6 or richer mix

Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metres lead:

Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 metres lead:

In cement mortar

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work including stacking of serviceable and di sposal of unserviceable material within 50 metres lead:

In cement mortar

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting ri vets, welding etc. including dismembering and stacking within 50 metres lead :

Dismantling including stacking of serviceable material and disposal of unserviceable material within 50 metres lead:

Bituminous road

Chipping of RCC work (taking all necessary safety precautions), exposing the reinforcement bars, cleaning, lapping or welding with new reinforcement as per drawings, cleaning, wire brushing and washing the exposed surfaces including disposal of unserviceabl e material as directed for all lifts within the owner's area, necessary scaffolding etc. for all elevations with all labour and mate rials complete as per drawings, specifications and directions of the Engineer-in-Charge.

Dismantling RCC work with contractor's own Pneumatic / Electric concrete breakers including arrangement for tapping compressed air f rom owner's sources (which will be allowed subject to availability of air) in hazardous areas like pump houses, inside unit ar eas which are fire prone due to presence of petroleum vapours etc. and elaborate precutions are to be taken for dismantling as per fire permit, clearance etc. and work is done extremely cautiously. The work item includes cost of all necessary accessories includin g breakers, needles etc. (taking all safety precautions) including cutting reinforcement bars, embedded structural steel members, disposal of the same as directed for all lifts within the owner's area with necessary scaffolding, propping and underpinning etc. for all elevations with all labour and materials complete as per drawings, specifications and directions of the Engineer-in-Charge.

Dismantling of following power distribution equipments without any damage to it and returning it to our stores or reinstallation of same at a place within a lead of 3 KM (reinstallation charges not includes) all complete with labour and materials as per the dir ection of the EIC.

Small equipment requiring tractor trailer but not requiring crane / hydra etc. (beyond 100 kg.)

Equipment weighing above 500 kg and requiring hydra and tractor trolley etc.

Equipment weighing more than 3 MT and requiring crane and tractor trolley etc.

Overhauling and painting of WAC, SAC, WC & Cold Storage of different make & different capacities located at various lo cation within the Station premises, Station township and air monitoring stations, job includes removal of machines from lo cation, dismantling, cleaning, washing, chemical cleaning of condenser & cooling coil, overhauling, lubrication of blower motor, checking, repair/rectification/replacement of effective control component. Paintin g of all metal part and chassis cover internal painting with primer & outer painting with synthetic enamel paint. Cleaning o f coil & condenser to be done with wire brush. Defective/damage insulation to be replaced. All the electrical wires must be d ressed properly. Defective wires to be replaced including supply of wires. Defective/damage asbestos she et to be replaced. Asbestos sheet shall be provided by the owner. Cleaning/replacement of filter by Ny lon filter. Re-assembly of machine, shifting to location & testing of machine. Job complete in all respect including men & mater ial and as per direction and instruction of Site Engineer/Engineer-in- Charge.

Installation of window A/C, water cooler of different make and different capacities at any location within the Stati on premises, Station township & at any other location of Station in the existing reachdymade frame/foundation. Job includes transportation of machine from workshop or other location to site, fixing of chassis cover, installation of machine in chassis cover, testing and commissioning of machine at location complete in all respect as per the direction & instruc tion of the Engineer-in-Charge.

Installation of window air conditioner of different make & capacity at any location within the Station premis es, Station township & air monitoring station. Job includes breachking of wall, supply & fixing of require wooden frame, rep airing & plastering of broken wall. Transportation of WAC from workshop or other location to the site, fixing of chassis co ver after drying, putting WAC in the chassis cover, testing and commissioning of machine at location. Job complete in all respect as per direction & instruction of the Engineer-in-Charge. NOTE : 1. This item shall not be applicable for breachking/cutting the window with glass/grill or metal structure. 2. Transport for AMS (Outside battery areach) shall be provided by department.

Supply of plywood sheet 4mm thick, cutting to required size for covering the WAC opening of different make and fixing with nails. Job complete with men & material and as per direction & instruction of the Engineer-in-Charge.

Supply, fabrication, welding, drilling cutting of MS angle, MS flat, MS channel etc. of required size for repairing of water cooler including painting of structure by one coat primer & two coat approved colour synthetic enamel paint. Job complete with all men & material and as per instruction of site Engineer/Engineer-in-Charge.

Supply of following type, window air conditioner kit for replacement the old damaged/defective body/kit of window air condi tioner. The new kit includes all the component such as condenser, cooling coil, blower motor, thermostat, control knob, co ntrol wiring kit, grill & other except the compressor. Job also includes dismantling of working compressor from the d amaged machine, fixing the same in new kit, changing of refrigerant gas R-22, complete testing & commissioning. Job complete in all respect including supply of kit and required R-22 gas, transportation of kit to site. The defective/damaged kit shall b e retained by the owner. Job complete in all respect with men & material and as per direction & instruction of Site Engineer/Eng ineer-in- Charge.

Cosmo type (Top flow of cold air)

National type (Right vertical side flow of cold air)

REPLACEMENT OF CONDENSER/ COOLING COILS OF WINDOW AC

Supply, fixing, gas charging, testing and commissioning of following condenser or cooling coils suitable for different make & different capacity window air conditioner. Job includes dismantling of old damaged condenser/cooling coil, supply & fixing new condenser/cooling coil, gas charging, testing & commissioning. Job complete in all respect with men & material including refrigerant gas R-22 and as per direction and instruction of site engineer/Engineer -in-Charge. NOTE : Old damaged condenser/cooling coil shall be retained by the department.

Condenser coil complete

Cooling coil complete

Routine, regular and breachkdown maintenance of WAC, SAC, WC and cold storage of different make & different capacitie s. Installed at various location of Station premises, Station township & air monitoring station. Job incl udes attending the complaints of machines as per the complaint register and instruction of site engineer. Job includes che cking of machines, identification of defect, repair/replacement of defective component. Rewinding of blower motor. Rep lacement of Thermostat, Blower, Fan blade, electrical switches, control knob, wires. Cleachning of air filter, removal of dust from cooling coil & condenser by removing the machine from location if required. Attending the minor/major leakag e of refrigerant gas R- 22/R-12 arresting the leak and recharging the gas. Repair/replacement of defective bush/bearing of blower motor including lubrication of blower motor, tightening of all the electrical connection. Repair/Replacement (by repaired co mpressor) of defective compressor. Job includes dismantling of defective compressor either at site or at worksh op after transportation of machine to workshop, taking necessary gate pass/permission from concerned authority, sending the defective compressor to repairer shop and bringing back the same/replaced (repaired) compressor from repair shop to site, re-fixing, gas charging, testing & commissioning and making the machine in perfect working condition. Replacement of all type of defective capacitor. Job also includes connection/disconnection for heater as per requirement and also replacing/the new fixing the new heater in the machine. The heater shall be pr ovided by the department. Job complete in all respect including all consumables including gas, men & material and as p er direction and

Supply & fixing of remote control switch pendant type for temperature controlling of the Voltas/Amtrex/ Fedders Lloyds/ Carrier Aircon or any other make, split air conditioners of 2.0/3.0 (2x1.5 TR) TR capacity. J ob includes dismantling of the defective switches and wire and installation of new switch. Job complete in all respect incl uding man and material and as per the directions of Engineer-in-Charge.

Supply & fixing of PVC make front grill suitable for window air conditioner (Voltas/Carriers/Blue Star/Fedders Lloyds /Usha, etc. ) as per direction of Engg.-in-Charge.

Supply, fixing, cutting, threading of GI pipe of following dia including bend, elbow, union, for fixing in water cooler for o ver flow & waste water. Job complete in all respect including men & machine & as per instruction of Engineer- in-Charge.

15 mm dia. nominal bore

20 mm dia nominal bore

25mm dia nominal bore

Dismantling & shifting of Split Air Conditioning Unit 1.0TR / 1.5TR / 2.0TR capacity including indoor and outdoor unit, refrigerant tubing etc. complete to new location or A/C workshop as per direction of Engineer-in-charge.

Installation of split type wall Mounted Air Conditioner indoor, outdoor unit fitted with rotary compressor, copper condenser and fir st charge refrigerant R410A/R22/Other, including connection of copper pipe and material supplied with complete unit etc. as required (Excluding cost of copper pipe) within Station / Petrochemical Complex/ Station Township as per direction of Engineer-in-charge.

Supply & fixing of additional length of copper tube for split A/C commissioning including all accessories.

Replacement of burnt uncut compressor of 1.5-ton capacity from the manufacturer whenever required as per direction of engineer-in-ch arge.

Gas charging of air conditioner upto 1.5ton capacity with job involved transportation of machine to vendors' works. Checking of all components for leak by charging co2 gas & finally evacuating the compressor completely & charges of refrigerant gas - 22. A

Replacement of burnt uncut compressor of 1.0 ton capacity from the manufacturer whenever required as per direction of engineer-in-c harge.

Supply of thermostat suitable for water cooler, window type rac whenever require as per direction of site engineer / engineer-in-cha rge.

Supply of air filter made of khus (coconut waste) smooth mounded suitable for 1.00/1.5 ton window type rac : size length - 540mm, br eadth - 260mm, thickness - 5 mm.

Supply of air filter (nylon make) suitable for 1.5 ton window type carrier, lg, vediocon, amtrex & any other make rac.

Rewinding of 1-phase/3-phase electrical motors of various voltage grades/makes/types and of following capacities as per th e original specifications & types/gauge of rewinding/winding wire, insulation of various points inside slots/overhang and overall fi nal layers of insulation/tapes as per the original motor specifications, after baking to required temperature and applying insulatin g varnish (Dr-Beck & Co. make & type), providing glass/other types of sleaves on connection wires from inside motor winding to conn ection plate. The winding, varnishing, tapes and other materials required for completion of this complete job is in the scope of co ntractor excluding transportation to & from Owner’s works to Contractor's rewinding shop. which shall be paid seperately on trip b asis.The winding wire will be Devi Dayal make and insulation tapes shall be ISI marked & of reputed manufacturers as per decisi on of Engineer-in- Charge. This also includes repair/replacement of connection plate completely including insulating sheet, nut s, bolts, washers and other hardwares as per original specifications. This further includes replacement of bearings (DE & NDE ) of SKF make & greasing (IOC/HP make Servogem 2 or equivalent). This further includes satisfactory trial of motors at Owner’s prem ises at No load as well as at Full load. The Contractor will guarantee the rewound motors for satisfactory performance for a period of minimum six months at owner’s premises & if any such rewound motor fails within six months, it is to be rewound again by Contrac tor free of cost. All complete with labour and materials as per directions of Engineer-in-Charge.Note: Burnt winding wire shal l be kept by Contractor. Bearing Shall be supplied by IOCL

Motors upto & including 1.5 KW

Motors above 1.5 KW but upto including 3.7KW

Motors above 3.7 KW but upto including 7.5KW

Rewinding of ceiling/pedestal/exhaust/air circulator fans of all types/sizes/make including 1-phase and 3-phase type exhaust fans max. upto 2.2 KW capacity and supply of super enameled win ding wire (Devi Dayal make, ISI marked insulation materials required). This also includes replacement of single/double bearing SKF make/bushes (as per original make) and overhauling of fan and all jobs related to complete this work in totality. This also includes removal of fans from site, installation and commissioning after testing of rewound fans and replacement of condenser, if required. This also includes transportation from site after dismantling to Contractor’s workshop and back to site. Note: Contractor has to give guarantee for rewinding of above items for a period of six months and if winding is burnt again within six months of working of fans, it has to be rewound again of Contractor. The burnt winding shall be kept by Contractor.

Ceiling/pedestal fans

Exhaust/air circulators fans.

Overhauling of exhaust/air circulator fans of various types/sizes makes and its bearings including removal from site, cl eaning, greasing after degreasing, assembling and fixing in position, testing and commissioning including transportation from site t o workplace and back all complete with labour and materials as per directions of Engineer-in-Charge.

Excluding the cost of bearings (Bearings if necessary will be supplied by Owner ).

Including supply and fixing of bearings of SKF make (02 Nos. bearings)

Overhauling of ceiling/pedestal fans of various types/ sizes/make and its bearings including removal from site, clean ing, greasing after degreasing, assembling and fixing in position, testing and commissioning including transportation from site to workplace and back. All complete with labour and materials as per directions of Engineer-in-Charge.

Excluding the cost of bearings. (Bearings if necessary will be supplied by Owner .

Including supply and fixing of bearings of SKF make and bushes (as per original make) of both sides by Contractor.

Supply, installation and fixing of ms chequered plates of 5mm thickness. job includes cutting to size, supply of hinges / hooks for lifting, tag welding with support wherever required, painting including supply of paint, supply of all material and labor complete i n all respect

Supply and laying of rcc pipe with collers jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement :2 fine s and) for road crossing Pipes are to be laid after ramming and consolidating the ground with bricks, stone chips etc. to avoid any s ettlement afterwards. Job includes supply of all labor and all materials required and executed as per direction of site engineer.

100 mm dia. R.C.C. pipe

150 mm dia. R.C.C. pipe

250 mm dia. R.C.C. pipe

300 mm dia. R.C.C. pipe

450 mm dia. R.C.C. pipe

Making horizontal bore / drill for roads at different location. Job includes pipe coupling & cutting, insert the pipe throug h both side of the road and make it as original (GI pipe, MS pipe from 2 to 8 meter long)(horizontal drilling). GI / MS pipe supply shall be in the scope of iocl. transportation of the pipe from stores / site to work site shall be in the scope of the contractor.

Structural steel work in single section fixed with or without connecting plate as specified below including cutting, hoisting, fixi ng in position and applying a priming coat of approved steel primer all complete including supply of all material & labour,transport ation etc..

WITHOUT CONNECTING PLATE

WITH CONNECTING PLATE

Providing and spreading 40mm size approved hard stone chips around transformer yard in one layer of 100mm thick. job includes dressi ng of soil surface and laying the aggregate in uniform laying and density as per direction of site engineer aggregate shall be measu red in boxes of size 1.1/2m x 1.1/2m x 1.1/2m which shall be taken as 1CUM. the boxes will be supplied by contractor free of charg e for measuring purpose.

Supply of 40mm size stone chips per CUM.

Spreading the stone chips per CUM

Removal of rubbish/debris/brickbats, laterite boulders, earth, plaster flakes etc. including carriage by mechanical transport in cluding packing stacking the rubbish in regular stacks at loading points at different places before loading the same in the truck s and unloading the same at directed places upto a lead of 2 KM, including local carriage of rubbish at loading and unloading p oint etc. complete as per direction of the Engineer-in-charge. (Payment will be made by stack measurement after deducting 20% for vo ids from stack measurement).

Providing and laying Plain Cement Concrete 1:3:6 by volume (1 cement: 3 coarse sand: 6 coarse aggregate of specifications given belo w) for all depths below and upto plinth level in foundations, fillings, non-suspended floors, pavements and ramps etc. including tam ping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface r ough or smooth as specified and directed; complete with all labour, materials, tools and tackles, consumables, transportation etc.; all as per specifications and directions of the Engeer-in-charge.

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying Plain Cement Concrete 1:4:8 by volument (1 Cement: 4 Coarse Sand: 8 Coarse aggregate of specifications given be low) for all depths below and upto plinth level in foundations, fillings, non-suspended floors, pavements and ramps etc. including t amping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the to surface rough or smooth as specified and directed; complete with all labour, materials, tools & tackles, consumables, transportation etc.; a ll as per the specifications and directions of the Engineer-in-charge

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size).

Filtration of transformer oil by stream line filter machine provided by the contractor for improving the insulation strength of oil to the required strength as per pacification given below (excluding the supply of oil. a) Filtration of transformer oil till desired bdv is attained as per is. b) Topping up of oil. c) Releasing all the air from air release plug & bucholz relay. d) To and fro transportation of filter machine and equipments.

Providing and laying reinforced cement concrete 1:2:4 (1 cement :2 coarse and : 4 coarse Aggregate as specified belo w) ure of all types, e.g. foundations, footings, rafts, beams, columns, plinth beams, slabs, pile caps, retaining wal ls, trenches, equipment/machine foundations, pedestals, stair cases etc. including providing pockets, openings, rece sses, chamfering etc. where required, tamping, vibrating to achieve proper compaction, curing and rendering, if requir ed, to give a smooth and even surface etc. all complete for all depths below and upto plinth level, in any shape, position and thickness, as per drawings, specifications and directions of the Engineer-in- charge with cost of all labour and materials complete but excluding the cost of centering, shuttering and steel reinforcement. With cement issued at Issue Rat es from Owner's Stores, including transportation from Stores to work site and returning all excess/ unused cement to O wner's Storage point after completion of work.- Crshed Stone chips 20 mm and down gauge.

Providing and laying smooth Cement Plaster with cement mortar of proportion and thickness specified below, on RCC/PCC/Masonry works etc. in walls, ceilings etc., including preparation of base, raking of points, making drip moulds, scaffolding upto any height, rou nding the corners, curing etc. with all labour and materials complete, as per drawings, specifications and directions of the engineer-in-charge

12 mm thick plaster with Cement Mortar 1:6 (1 Cement: 6 Fine sand

15 mm thick plaster with Cement Mortar 1:6 (1 Cement: 6 Fine sand)

Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in positi on and applying a priming coat of approved steel primer all complete including supply of all material & labour,transportation etc.

Transportation from the store to the site or from worksite to worksite within battery area or within township of panel, motor and a ny other equipment alongwith all necessory accessories without any damage. All complete with labour, materials, necessary tool s/tackles and shifting vehical/ mode as per the direction of Engineer-in-Charge.

Small equipment requiring tractor trailer but not requiring crane / hydra etc. (beyond 100 kg.)

Equipment weighing above 500 kg and requiring hydra and tractor trolley etc.

Equipment weighing more than 3 MT and requiring crane and tractor trolley etc.

PAINTING WORK ON ELECTRICAL EQUIPMENTS

Cleaning of surface, rust removing of foreign matter, rubbing down thoroughly with emery paper, wire brush, washing with degreasing solvent (white spirit) to remove grease etc. and preparation of surface for application of enamel paint by spray painting on bus duc ts, transformers/motors/ or any other metallic surface with one coat of ready mixed primer and two coats of Approved quality/APCOLI TE ASIAN synthetic enamel paint including supply of paint suitable for a temperature of 100 Degree Celsius. All complete with labo ur and materials as per directions of the Engineer-in- Charge.

PAINTING OF ELECTRICAL EQUIPMENTS: Cleaning of surface, rust removing of foreign matter, rubbing down thoroughly with emery paper, wire brush, washing with degreasing solvent (white spirit) to remove grease etc. and preparation of surface for application of pain t by spray painting on electrical equipment/ structures/ poles or any other metallic surface with two coats of approved brand and manufacturer Aluminium paint including supply of paint suitable for a temperature of 100 Degree Celsius. All complete with labour and materials as per directions of the EIC.

WRITING WORK ON ELECTRICAL EQUIPMENTS

Re-lettering with black Japan paint of approved brand and manufacture. Note : Unit of measurement is considered EACH which is equal to per cm height per letter.

Supply & Installation of Flaimproof Welding Outlets Outlet, 415V, 63A, 5 PIN Socket & Top, 50HZ

SAFETY EQUIPMENT - Supplying the following Safety Equipment as per directions of Site Engineer / En RUBBER HAND GLOVES: Rubber hand gloves suitable for 11/6.6 KV operation with ISI mark.

SAFETY EQUIPMENT - Supplying the following Safety Equipment as per directions of Site Engineer / En Supply and installation of 11/6.6 KV Discharge Rod

INSULATING MATS - Supply & installation of 2000 mm X 1000 mm and of thickness as mentioned below, a Insulating Elastomer mats conforming to IS 15652:2006 of th ickness 2 mm (Class A)

INSULATING MATS - Supply & installation of 2000 mm X 1000 mm and of thickness as mentioned below, a Insulating Elastomer mats conforming to IS 15652:2006 of th ickness 2.5 mm (Class B)

SAFETY EQUIPMENT - Supplying the following Safety Equipment as per directions of Site Engineer / En Supply of fully charged CO2 fire extinguishers as p er specifications (4.5 kg capacity as per IS: 28

All in one solar based LED street lights: Supply of all in one solar based LED street lights (refer technical specifications) at sit e approve

Flameproof DB: Supply of the flameproof (Ex'd) and weatherproof (Minimum IP- 65) Distribution Boards (with Spares)

LT Panel - Erection, installation including transportation from owner desginated location, testing Weight of unit above 100 kg but u pto and including 500 kg

LT Panel - Erection, installation including transportation from owner desginated location, testing Weight of unit above 500 kg but u pto and including 1000 kg

LT Panel - Erection, installation including transportation from owner desginated location, testing Weight of unit above 1000 kg but upto and including 3000 kg

LT Panel - Erection, installation including transportation from owner desginated location, testing Weight of unit above 3000 kg but upto and including 6000 kg

TRANSFORMER: Installation, testing and commissioning of owner supplied (outdoor type -ONAN cooled) transformer o

SHIFTING OF TRANSFORMER: SHIFTING OF 500- 1600 KVA TRANSFORMER Disconnection, dismantelling, removal, loading / unloading of

EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cabl GI wire (8 SWG)

EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cabl GI wire / rope 35 sq. mm

EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cabl GI wire / rope 10 mm diameter

EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cabl Copper cable as per specifications - 100 Sq.mm

EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cabl Copper cable as per specifications - 10 Sq.mm

FLAME PROOF FITTINGS - All equipment under this category shall be suitable (minimum requirments) fo FLAMEPROOF TUBELIGHT, 2x22Watt, LED, SUITABLE FOR Exd Gas Group II C, as per IS/IEC 60079-2007

FLAME PROOF FITTINGS - All equipment under this category shall be suitable (minimum requirments) fo FLAMEPROOF LED FLOOD LIGHT FITTING 45 W, Supply, installation, testing & commissioning of Ex'd' (Fl

FLAME PROOF FITTINGS - All equipment under this category shall be suitable (minimum requirments) fo FLAMEPROOF LED WELL GLASS FITTING 125 W, Supply, installation, testing & commissioning of Ex'd' (Fl

FLP/WP PUSH BUTTON STATION - Supply ,erection,testing and commissioning of FLP/WP push button(ON/OF With Ammeter

FLP/WP PUSH BUTTON STATION - Supply ,erection,testing and commissioning of FLP/WP push button(ON/OF Without Ammeter

FLP & WP JUNCTION BOX - Supply, erection, installation, testing and commissioning of flameproof & 8 way junction box with 8 cable entries (1 x 1" & 7 x 3/4 ") at bottom & 20 nos. terminals.

FLP & WP JUNCTION BOX - Supply, erection, installation, testing and commissioning of flameproof & 6 way junction box with 6 cable entries (6 x 3/4") at bot tom & 20 nos. terminals.

FLP & WP JUNCTION BOX - Supply, erection, installation, testing and commissioning of flameproof & 4 way junction box with 4 cable entries (4 x 3/4") at bot tom & 20 nos. terminals.

FLP/WP EXHAUST FANS: Flame proof, weather proof, single phase, 12" exhaust fan, IP65, LM6 type EF1001 of FCG or equivale

FLP/WP EXHAUST FANS: Flame proof, weather proof, single phase, 12" exhaust fan, SUITABLE FOR Exd Gas Group II C, as per

FLP/WP ROTARY SWITCH: Supply, installation, testing & commissioning of Flame proof weather proof ON/OFF Rotary Switch , I

FLP/WP DISTRIBUTION BOARDS - Supply, erection, installation, testing and commissioning of flamepro Outdoor Type, floor mounted, flameproof, weatherproof (IP 65) Lighting Distribution board Type-I DB

FLP/WP DISTRIBUTION BOARDS - Supply, erection, installation, testing and commissioning of flamepro Outdoor Type, floor mounted, flameproof, weatherproof (IP 65) Lighting Distribution board Type-II D

FLP/WP SWITCH CUM SOCKET - Supply, erection, installation, testing and commissioning of flameproof 250V, 15 A switch cum socket with plug

FLP/WP SWITCH CUM SOCKET - Supply, erection, installation, testing and commissioning of flameproof 250V, 63 A Plug & welding receptacle

FLP/WP SWITCH CUM SOCKET - Supply, erection, installation, testing and commissioning of flameproof 415V, 63A, Switch & Socket with Plug (No. of Pins 3P +N+ E ), Model EPSS 1563-61 of Baliga or Equiva

WP PUSH BUTTON STATION: Supply, erection, testing and commissioning of Weather Proof push button (OFF) control station of a

SHOCK TREATMENT CHART: Supply and installation of shock treatment chart framed in good quality glass in English / Hindi /

PLASTIC INSCRIPTION PLATE: Supply and installation of approved quality plastic name inscription plates including engraving th

Lighting Distribution Board / AC Distribution Board - Supply , installation, testing and commission Type III Distribution Board: Double Door EURODB of Havells or equivalent approved make having bus b

Lightining Arrestor: Supply, installation and testing of Lightning arrestor on top of the MOV buiding or MOV CP buiding

Fire Siren Board: Supply and fixing of Fire Siren Board for 2.1 kW Fire Siren as per specification.

Room Accosutic Lining: Room Accosutic Lining with 50 mm thick fibre glass density 32 Kg/cum ) covered with RP tissue pape

Insulation: Under dake Insulation with Fire resistence TF Quality Poly Styrene 50mm thick ( density 32 Kg/cum )

Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized CU,3CX2.5 mm²,2XWY

BUS DUCT INCLUDING SUPPLY OF STRAIGHT RUN,ADAPTOR BOX AT TRANSFOMER END,FLEXIBLE COPPER LINK,VERTIC BUS DUCT INCLUDING SUPPLY OF STR AIGHT RUN,ADAPTOR BOX AT TRANSFOMER END,FLEXIBLE COPPER LINK,VERTIC

CABLE SUPPLY & LAYING : Supply, laying & testing of XLPE insulated, FRLS property on outer sheath, 6C x 2.5 sq. mm. Cu. Control cable

CABLE SUPPLY & LAYING : Supply, laying & testing of XLPE insulated, FRLS property on outer sheath, 4C x 2.5 sq. mm. Cu. Control cable

Providing and fixing M.S. grills of required pattern in frames... Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete :

Precast cement concrete Jali 1:2:4 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded ston e aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shu

40 mm thick 40 mm thick

STEEL REINFORCEMENT : STEEL REINFORCEMENT :

Size of Tile 600 x 600 mm Size of Tile 600 x 600 mm

Providing and fixing false ceiling at all heights with integral... Providing and fixing false ceiling at all heights with integral d ensified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, desig n

Providing and fixing tiled false ceiling of specified materials of... Providing and fixing tiled false ceiling of specified material s of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvan ized

12.5 mm thick fully Perforated Gypsum Board tile made from... 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboa rd having glass fibre conformi

40 mm nominal dia pipes 40 mm nominal dia pipes

100 mm nominal dia pipes 100 mm nominal dia pipes

40 mm dia nominal bore 40 mm dia nominal bore

Supplying and fixing rolling shutters of approved make, made of... Supplying and fixing rolling shutters of approved make, made of r equired size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on s pe

Providing and fixing ball bearing for rolling shutters. Providing and fixing ball bearing for rolling shutters.

Exceeding 10.00 sq.m. and up to 16.80 sq.m. in the area Exceeding 10.00 sq.m. and up to 16.80 sq.m. in the area

Fixed to openings/ wooden frames with rawl plugs screws etc. Fixed to openings/ wooden frames with rawl plugs screws etc.

Providing and fixing Anodised Aluminium grill (Anodised transparent or dyed... Providing and fixing Anodised Aluminium grill (Anodis ed transparent or dyed to required shade accor

Grading roof for water proofing treatment with : Grading roof for water proofing treatment with :

Providing and applying polymer modified, flexible cementatious negative side waterproofing... Providing and applying polymer modifie d, flexible cementatious negative side waterproofing coating

In flooring on a bed of 10 mm thick mortar... In flooring on a bed of 10 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sa

75 mm thick back filling for pitching including supplying of... 75 mm thick back filling for pitching including supplying of require d materials and consolidation etc. complete with :

Hot finished welded type tubes Hot finished welded type tubes

Electric resistance or induction butt welded tubes Electric resistance or induction butt welded tubes

Providing and fixing mild steel round holding down bolts with... Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Fixed to steel windows by welding Fixed to steel windows by welding

Supplying and placing in position 5.0 mm thick steel chequered... Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits

50 mm thick 50 mm thick

25 mm thick 25 mm thick

Steel reinforcement for R.C.C. work Steel reinforcement for R.C.C. workincluding initial straightening of coiled/uncoiled bars, rem oval

Brick work with common burnt clay F.P.S. Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in f oundation and plinth in :

Cement mortar 1:6 (1 cement : 6 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying Double Charge Vitrified Tiles (polished finish) of... Providing and laying Double Charge Vitrified Tiles (polis hed finish) of specified sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:1562

External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,... External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitt ings This includes

20 mm nominal dia pipes 20 mm nominal dia pipes

80 mm nominal dia pipes 80 mm nominal dia pipes

150 mm nominal dia pipes 150 mm nominal dia pipes

External Work: Providing and fixing G.I. pipes complete with G.I. External Work: Providing and fixing G.I. pipes complete with G .I. fittings including trenching and refilling etc. :

80 mm dia nominal bore 80 mm dia nominal bore

80 x 1.25 mm M.S. laths with 1.25 mm thick top cover 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover

Extra for providing mechanical device chain and crank operation for... Extra for providing mechanical device chain and crank operati on for operating rolling shutters :

Exceeding 16.80 sq.m. in area Exceeding 16.80 sq.m. in area

Providing and fixing 12 mm thick frameless toughened glass door... Providing and fixing 12 mm thick frameless toughened glass door s hutter of approved brand and manuf

Cement concrete 1:2:4 (1 cement : 2 coarse sand :... Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 m m nominal size)

Providing and fixing 10 mm thick acid and/or alkali resistant... Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make & colour using acid and/or alkali resisting mortar bedding and filling joints with acid and/or alkali resisting ce

Stone aggregate 40 mm nominal size Stone aggregate 40 mm nominal size

Providing and fixing Stainless Steel (Grade 304) railing made of... Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc

Steel work in built up tubular (round, square or rectangular... Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, inc

Hot finished seamless type tubes Hot finished seamless type tubes

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet... Providing and fixing circular/ Hexagonal cast iron or M.S. shee t box for ceiling fan clamp, of inte

Providing and fixing bolts including nuts and washers complete. Providing and fixing bolts including nuts and washers complete.

Welding by gas or electric plant including transportation of plant... Welding by gas or electric plant including transportation of p lant at site etc. complete.

Service Supplying & fixing cable route marker with cement concrete 1:2:4 (1 cement: 2 coars sand: 4 graded

Service Charges for hiring of hydra including provision of requisite belts/rope slings etc. for loading/unl

Service Charges for hiring of Crane,of maximum upto 60 Ton, Boom height 45 M including provision of requisi

Service Charges for hiring of back hoe Note: UoM is EA which is equal to a trip of 4 hrs

Service Complete service of Tower AC including washing with water and detergent, changing spares, reinstall

Service Replacement of Oudoor Fan Motor Blade :PROPELLER TYPE FAN

Service Refrigerant gas charging R22/R410/R32 as applicable

Service Nitrogen Gas charging for leakage checking

Service Replacement of 45 micro farad Capacitor of Approved make

Service Replacement of 1.5/2/3 TR Condesor Coil Specifications of the Condenser Coil is as follows: 1) Inn

Service Replacement of 1.5/2/3 TR Compressor :High EER Rotary Type

Service Replacement of Outdoor unit fan Motor

Service AC PCB repairing : Removal of defective PCB from the AC unit. Repairing of the PCB unit or supply a

Service Leakage Detection & Repair in 1.5/2/3 TR ACs

Service Rewinding/Repairing of Outdoor unit fans

Service Supply & installation of 1.5/2/3 TR AC Out Door Unit (ODU)

Service Mobilization and De-mobilization of DG set (in healthy working condition), along with operator, tools tackles and necessary cable connection between existing panel to DG set to/from PHBPL-Paradip sta

Service 15 KVA rating

Service 30 KVA rating

Service Running charges of DG set of 15KVA, including fuel, maintenance of DG, operator, tools tackles with necessary cable connecti on and safety precautions between existing panel to DG set per hour basis,

Service 15 KVA rating

Service 30 KVA rating

Service Idling charges of DG set of 15 KVA, including maintenance of DG, operator, tools tackles with necessary cable connection and safety precautions between existing panel to DG set per hour basis, as per

Service 15 KVA rating

Service 30 KVA rating

Calibration Of Instrument Calliberation of Measuring equipments from NABL accrediated lab & submission of reports.Note: UoM i

Testing of Transformer OIL Transformer Oil Sample Collection & Testing from ERADA/NABL Accredited laboratry as per direction

Contractor’s Service charges for providing Highly Skilled Service Assistance for Electrical Maintenance Work on daily basis

Contractor’s Service charges for providing Skilled Service Assistance for Electrical Maintenance Work on daily basis

Contractor’s Service charges for providing & supervising Un-Skilled labours as & when required basis as per direction of EIC

Variable Part Supply Items

Supply Item 350W LED flood light luminaire with following specifications. 35000 Lumens minimum, Mounting bracke

Supply Item SUPPLY of PVC TAPE: 25 mmX 8 Mx0.125 mm of Reputed Make.

Supply Item SUPPLY of markin cloths of white colour as per direction of EIC.

Supply Item Hexagonal Bolt: Stainless steel grade: 304/A2 Diameter: 8 MM Length: 30 MM Note:Unit of measurement

Supply Item Hexagonal Bolt: Stainless steel grade: 304/A2 Diameter: 8 MM Length: 50 MM Note:Unit of measurement

Supply Item Hexagonal nut: Stainless steel grade: 304/A2 Diameter: 8 MM Note:Unit of measurement is considered

Supply Item Plain washer: Stainless steel grade:304/A2 Diameter: 8 MM Thickness: 1.2 MM Note:Unit of measuremen

Supply Item Hexagonal Bolt/Nut/Washer: Hot Dip Galvanized. Bolt/Nut Diameter:All Bolt Length:All Washer thickne

Supply Item SUPPLY of Distilled water of Reputed Make.

Supply Item Supply of Transformer oil of reputed make as per direction of EIC.

Supply Item Supply of Servo GEM RR-3 grease as per direction of EIC.

Supply Item Supply of 2.5 MFD capacitor of reputed make and as per direction of EIC.

Supply Item Supply of door locks of reputed make as per direction of EIC.

Supply Item Supply of Cu/CuSO4 M.C. Miller Half Cell

Supply Item Silicon Sealant - Black

Supply Item SR-998 Glue for Neoprene Mat.

Supply Item 250 micron Polythene Membrane

Supply Item Supply of Cu- Cuso4 permanent Half cell with minimum 10 m length , 1C x 6 sqmm Cu conductor, XLP

Supply Item Supply of 180 AH, 12 V Lead Acid/SMF Battery

Supply Item Supply of SAFETY ELECTRICAL LOCKOUT TAGOUT KIT (1 PADLOCK, 2 HASP and 5 Pairs of TAG)

Supply Item Supply of ERP trailing Cable for High mast of Size 5CX4 mm2, Cu

Supply Item Supply of Battery Chargers 24VDC, 21A

Supply Item Supply of Multi-Meter/Clamp Meter Test probes

Supply Item Supply of 10 A or above rated power extension board(ISI approved) with minimum 5 nos. 3 pin shocket

Supply Item Supply of battery terminal copper clamp for 12V, 180AH high cranking batteries.

Supply Item Supply of 1CX70 mm2 Cu cables

Supply Item Supply of Hydrometer for Battery Bank Testing

Supply Item Supply of Barricading tape

Supply Item Supply of Normal chargable Torch light (Indian make)

Supply Item ELECTRICAL CONTACT CLEANER (CRC) 2-26, 500mL

Supply Item INSULATION TAPE,PVC-3M ,ADHESIVE,L:10m,W:19mm,RED

Supply Item INSULATION TAPE,PVC-3M ,ADHESIVE,L:10m,W:19mm,YELLOW

Supply Item INSULATION TAPE,PVC-3M ,ADHESIVE,L:10m,W:19mm,BLUE

Supply Item INSULATION TAPE,PVC-3M ,ADHESIVE,L:10m,W:19mm,BLACK

Supply Item INSULATION TAPE,PVC- 3M,ADHESIVE,L:10m,W:19mm,GREEN

Supply Item HT INSULATION TAPE: SELF FUSING, ETHYLENE PROPYLENE RUBBER (EPR), 12kV, 10m X 25mm X 0.75mm, ON-AG

Supply Item PETROLEUM JELLY

Supply Item M-SEAL,EPOXY RESIN,MS.801,MSH 250

Supply Item AEROSOL, ANTIRUST SPRAY , WD 40

Supply Item DURACELL1.5V ALKALINE BATTERY TYPE AA

Supply Item DURACELL1.5V ALKALINE BATTERY TYPE AAA

Supply Item DURACELL 1.5V ALKALINE BATERY SIZEC LR14

Supply Item DURACELL 9 VOLT ALKALINE BATTERY

Supply Item Supply of cotton waste (COTTON WASTE TYPE-1 IS:5485)

Supply Item BELZONA,MOLECULAR E-METAL PACKING: 1/2 KG PACKET

Supply Item PVC/ Plastic Putty

Supply Item EMERY PAPER Size,mm : 280x230 approx, 1 EA = one qty of above size, Grit Size : Grit 180

Supply Item Electrical Panel Lock Out Padlock (having number marking as detailed below), each along with minimu

Supply Item WATER PROOF HDPE TARPAULIN WITH TIE HOLES IN EVERY CORNER(SIZE: 6 m x 6 m) (1) Governing Standard:

Supply Item BLADE,HACKSAW,HSS,12INX1/2INX23GX18TPI

Supply Item STEEL WIRE BRUSH STANDARD WITH 5 ROWS (WELDING BRUSH) 77 SLOTS, NO OF WIREPER SLOT:16 NOS STEEL WIR

Supply Item TAPE,TEFLON,ROLL,12mm x 12 Mtrs.

Supply Item RTV SILICON SEALENT PACKING: 300 Gms 1. Spraying gun: One no. gun per 20 bottles to be supplied. 2

Supply Item RUSTOLENE,1/2Ltr TIN RUST REMOVER COMPOUND

Supply Item GRINDING WHEEL,COARSE,200x25x25mm (Make- Carborundum/Grindwell Nortan)

Supply Item GRINDING WHEEL,200x25x31.75,CARBORUNDUM (Make- Carborundum/Grindwell Nortan)

Supply Item GRINDING WHL_100X4X16MM A30 S BF Make- Carborundum/Grindwell Nortan)

Supply Item GRINDING WHEEL,125X6X22MM (Make- Carborundum/Grindwell Nortan)

Supply Item ELECTRIC PORTABLE HAND DRILL MACHINE SUITABLE, FOR 230 VOLT 50 HZ SINGLE PHASE AC SUPPLY AS PER BE

Supply Item MULTIMETER PROBE,MAKE: FLUKE

Supply Item Kluber Grease for Ansaldo make Motors at Paradip (LKUBER ASONIC HQ- 72- 102)

Supply Item FLUORESCENT REFLECTIVE TAPE 2IN x 150IN

Please Enable Macros to View BoQ information