COMPREHENSIVE REPAIR AND MAINTENANCE IN EME CENTRE FD WORKSHOP HRDC FD HOSPITAL NSC ENGR REGT ASC BN AND OTHER MINOR UNITS AT BAIRAGARH UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

M&L for 15mm thick rendering in cement mortar 1:4 on any face of brick or concrete surfaces (external surfaces) mixed with water proofing compound @ 3% by weight of cement, finished even and smooth without using any extra cement including taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water of any description complete all as specified and directed. Note:- (i) Water Proofing compound shall be measured and paid seperately. (ii) Rate is inclusive of scaffolding upto height of 10 m.

M&L for 10mm thick rendereing in cement mortar 1:6 on any face of brick or concrete surface, finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water of any description complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling, finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water of any description complete all as specified and directed.

Supply only integral water profing compound complete all as specified and directed.

M&L for preparation of nemly plastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS:15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm complete all as specified and directed.

M&L for applying a coat of 1mm thick white wall putty on walls, finished even and smooth complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for rectification of dampness on wall area by removing existing putty/ plaster/ POP surface from the affected wall with wire brush/ grinder/ hammer etc; up to brick level and then filling crack fill paste in visible cracks and applying two coats of damp stop elasto of Make: Berger or equivalent of approved make over finished surface with and including necessary scaffolding suitable for height upto 10.00 mtr from average ground level complete all as specified and directed.

M&L for complete removal of existing treatment on walls/ chajja/ roof projections including facias, cornices etc. by scrapping with sanding pad of appropriate grit to make surface clean, free from dust, getting out loose paint and washing/ cleaning down with water by skilled labour with and including filling holes, cracks, depressions of scraped surfaces with putty including preparing surfaces for further treatment including necessary scaffolding suitable for height upto 10.00 mtr from average ground level complete all as specified and directed.

M&L for applying two coats exterior weather proof emulsion paint of 100% premium acrylic emulsion paint on old prepared wall surfaces including chajja, patta etc. having VOC less than 50 gm/litre and UV resistance as per IS:15489:2004, water, alkali and fungal resistance, dirt resistance of required shade with silicon additives @ 1.43 litre/ 10 sqm over and over a coat of priming coat of exterior primer applied @ 0.90 litre/10 sqm including necessary scaffolding suitable for height upto 10.00 mtr from average ground level complete all as specified and directed.

All as per item No. 11.00 here-in-before but one coat of exterior weather proof emulsion paint over a coat of primer on old prepared wall surfaces including chajja, patta etc. surfaces where damp proof treatment has been done.

All as per item No. 11.00 here-in-before but one coat of exterior weather proof emulsion paint on old prepared wall surfaces including chajja, patta etc. surfaces.

M&L for applying one coat of oil bound distemper emulsion on old prepared wall surfaces including window and door jambs, cills, cornices etc. having VOC content less than 50 gms/litre of approved shade and colour complete all as specified and directed.

M&L for applying two coat of oil bound distemper emulsion on old prepared wall surfaces including window and door jambs, cills, cornices etc. having VOC content less than 50 gms/litre of approved shade and colour complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling including brooming, scraping down smoke spot, moulds, moss, effloresecent salts trading oil, greasy spots and stopping nails marks and applying one coat of white wash complete all as specified and directed.

M&L for preparation of wall surfaces and applying heritage/ texture finish of approved design/ colour over plastered surfcaes of walls with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20 Kg/10 sqm including and finished to required level complete all as specfied and directed. Note:- Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed.

Dismentling of structural steel work including purlins, tursses, etc. complete all as specified and directed.

Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc. 40 sqcm and over in section, in any posotion in unframed works complete all as specified and directed.

S&F of mild steel work in tubular/angle trusses including special shaped washers, purlins, rafters, posts etc; using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St-240 complete all as specified and directed.

M&L for pre galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick AZ-150 of any colour having tensile strength of 550/MPA as in roof covering/ cladding to wall/ ridge, fixed with self tapping screw/ L type or J type cranked hook bolts including dismantling of asbestos cement (corrugated, semi corrugated etc) sheets complete all as specified and directed.

M&L for pre galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick AZ-150 of any colour having tensile strength of 550/MPA as in roof covering/ cladding to wall/ ridge, fixed with self tapping screw/L type or J type cranked hook bolts including dismantling of asbestos cement (corrugated, semi corrugated etc) sheets complete all as specified and directed.

M&L for machine cut kota stone slab flooring, 18-20 mm thick over and including 15 mm thick screed bed in CM 1:6, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing including dismantling of stone slabs and tiles of any description and in any position complete all as specified and directed.

M&L for machine cut kota stone slab flooring, 18-20 mm thick over and including 10 mm thick renderingscreed bed in CM 1:6, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing including dismantling of stone slabs and tiles of any description and in any position complete all as specified and directed.

M&L for granite 16-18 mm thick (of any type) stone work (machine cut) in steps, jambs, pillar, window-cills, cooking platform and like over and including 15 mm thick screed bed in cement mortar 1:4 and pointing in white cement in ratio 1:2 using marble dust with admixture of pigment to match with shade of granite including dismantling of stone slabs and tiles of any description and in any position complete all as specified and directed.

M&L for rounding to external edges of stone (one edge) as in steps, cooking platform and other similar situation complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over and including 15 mm thick screed bed in CM 1:6; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the permises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeing 0.18 sqm as in skirting over and including 10 mm thick rendering in CM 1:4; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the permises complete all as specified and directed.

M&L for glazed coloured tiles, size 300 x 450 x 6 to 7mm thick as in skirting/dado over and including 10 mm thick rendering in CM 1:4; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the permises complete all as specified and directed.

M&L for water proofing treatment to sunken portion surfaces of slab with and including of following activities:- (a) Demolition of cement/lime concrete of any description and in any position. (b) Providing slope of 25 mm thick (average thickness) with PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) mixed with integral water proffing compound "DITCHTMENT DM" manufactured by Dr fixit/ Pidiproof LW + of M/s Pidilite Industries/ STP No 1 (Liquid) of M/S STP Ltd as approved in proportions as per manufacturer instructions. (c) Applying evenly a priming coat of bituminous primer confirming to IS:3384 @ 0.7 Kg per Sqm on prepared surfaces. (d) Applying evenly a coat of hot blown bitumen grade VG-10 @ 1.5 kg/sqm on the primed surfaces. (e) Laying 150 micron thick black polythence film on the suface with 10 mm overlaps duly sealed and bounded to surface. (f) Finally applying evenly a coat of hot bown of grade 85/25 @ 1.5 kg per sqm on the surfaces. (g) Testing for water thightness by ponding of water for 48 hrs for leakage/ seepage.

S&F in replacement 15 mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors including cutting chases, pinning in wherever required and making good in CM 1:4 complete all as specified and directed.

S&F in replacement 20 mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors including cutting chases, pinning in wherever required and making good in CM 1:4 complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laborary with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size 915 x 460 mm and bowl size 410 x 330 mm complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, brass chromium plated, fancy type with capstan head, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, brass chromium plated, fancy type with capstan head, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm bore long body bib taps, brass chromium plated, fancy type with capstan head, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm bore stop/ angle cocks, brass chromium plated, fancy type with capstan head, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore stop cocks, brass chromium plated, fancy type with capstan head, long shank and cup (concealed type) screwed down, screwd for iron pipe or union complete all as specified and directed.

S&F in repairs 15mm bore wall mixer, brass chromium plated, fancy type for mixing hot and cold water with capstan head, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore brass centre hole basin mixer, brass chromium plated, fancy type, single lever for mixing hot and cold water, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm in size with or without swivel joints, any size including fixing to 15 mm bore steel pipe and fixed complete all as specified and directed.

S&F in repairs 19/ 20 mm dia stainless steel curtain rail of wall thickness 1 mm, fancy type with and including fixing brackets, stops, rollers etc; as per site requirement complete all as specified and directed.

S&F in repairs 18 mm plywood, grade BWR, type BB with 0.9mm decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions fixed with SS butt hinges and screws to timber frame work including dismantling boarding, any description, fixed in any position complete all as specified and directed.

S&F of continuous (piano) hinges with 30 mm flap width of mild steel, bright finish or electro galvanised and fixed with screws complete all as specified and directed.

S&F of 100 mm long hasp and staple, safety type, anodised with mild steel hinge pin including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F in repairs 40mm dia cupboard/ kitchen cabinet bras knobs and fixed with nuts, screw and washer complete all as specified and directed.

M&L for fabricating for doors, windows any type, frames and partitions with powder coated (minimum 50 miciron) aluminium sections of required size with and including aluminium fittings of required size, jointing cleats, screws, slash fasterners, plug for fixing with walls, column etc including taking down damage portion of damage door, windows or complete door/window complete all as specified and directed. Note:- Rates are inclusive of necessary new fitting for door/ window i.e handle, tower bolt, butt hinges, rubber beadings etc.

M&L for mild steel framed work such as grills, gratings, gate etc; with ends of bars, souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F of 4.8 mm thick plain sheet glass and glazing with putty or fixing glass to uPVC surrounds in square exc 0.50 sqm in each panels complete all as specified and directed.

S&F of stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples to uPVC door with beading complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples to uPVC door with beading complete all as specified and directed.

S&F of 4 mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each panels complete all as specified and directed.

S&F in repairs 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each panels complete all as specified and directed.

S&F of 3 mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sqm in pane complete all as specified and directed.

Taking down chowkhats or frame with shutter, area n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F of solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reiforced with mild steel square tube and fixing in opening as per manufacturer instructions complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as shown in SSR-2004 Part - II complete all as specified and directed.

Taking down door shutter any description, area exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed.

M&L for 30 mm thick facory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face 0.9 mm mica and 2nd class hard wood lipping all round to match complete all as specified and directed.

S&F of 2nd class wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8; supplied and fitted to chowkats complete all as specified and directed.

Taking down chowkhats or frame with shutters exc. 1.5 Sqm but n.exc. 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other fames/ chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Notes: (i) M.S. hold fast/ lugs or SS dash fasteners shall be included in the quoted rate of item. (ii) Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)proof and & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Notes: (i) Stainless steel butt hinges and screws shall be included in the quoted rate of item. (ii) Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F of factory made 30mm thick 100% Solid WPC (Wood polymer Composite) laminated wiremesh door shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity, screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being termite/ borer free, water/ moisture proof and fire retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter for fixing mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and directed. Notes: (i) Stainless steel butt hinges and screws shall be included in the quoted rate of item. (ii) Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F of 100 mm long mild steel butt hinges medium weight, cold rolled and fixed with screws complete all as specified and directed.

S&F of 150 mm long aluminium handles, cast type, anodised and fixed with screws complete all as specified and directed.

S&F of 150 mm long aluminium anodised barrel tower bolts, extruded section and fixed with screws complete all as specified and directed.

S&F of 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new wood or wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L for 32 mm dia uPVC pipe as in water spout at the lowest point of sunken floor with 600 mm projection beyond the outer face of the wall with outer end cut in chamfered angle for easy drain of water complete all as specified and directed.

S&F in repairs 32 mm bore PVC waste pipe for kitchen sink /WHB of one mtr length complete all as specified and directed.

S&F in repairs 40 mm bore PVC waste pipe for kitchen sink /WHB of one mtr length complete all as specified and directed.

S&F in repairs 100 mm dia CP grating (Minium weight 25gms) and fixed on floor with white cement complete all as specified and directed.

S&F in repairs PVC connection 15 mm size PTMT nuts of length 600mm and fixed complete all as specified and directed.

S&F in replacement vitreous china WC squatting pan "Orissa Pattern" of size 580 x 440mm white with integral foot rests with and including provn of cement concrete bedding and 'P' or 'S' trap as required including connection to trap and to flush pipe, anti syphonage pipe, etc. and making good to floor complete all as specified and directed.

S&F of vitreous china oval shaped cunter top wash basin, white, approx size 550 x 400 mm including pvc waste pipe, cp coupling, PVC pipe connection 15mm dia & 600mm long and fixed in position complete all as specified and directed.

S&F in replacement vitreous china wash down water closet pan (Pedestal pattern) with 'P' or 'S' trap, white (excluding fixing bolts, flushing cistern and flush pipe) with and including white plastic seat cover with aluminium hinging device complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 630 x 450 mm including brackets, PVC waste pipe, CP coupling, PVC pipe connection 15mm dia & 600mm long and fixed in position complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with all internal fittings including 32mm dia flush pipe and PVC connection 600 mm long & 15 mm bore with brass heads and washers and fixed in position complete all as specified and directed.

S&F in repairs health faucets, mild steel chromium plated with 1.2mtr long CP flexible pipe and fixed to 15 mm bore pipe complete all as specified and directed.

S&F in repairs Jet spray (butterfly) mild steel chromium plated with 1 mtr tube and fixed to 15 mm bore pipe complete all as specified and directed.

S&F in repairs toilet paper holder of mild steel chromium plated and fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repairs EWC plastic seat cover white/coloured with fixing bolts and hinging device complete all as specified and directed.

S&F of 75mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joints and fixed to walls / laid in trenches/floors complete all as specified and directed.

S&F of 75mm bore PVC (SWR) bore bends any radious and jointed in solvent cement complete all as specified and directed.

S&F of 75mm bore PVC (SWR) junction single, (SingleT) equal or unequal and jointed in solvent cement complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls or laid in trenches/ floors complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bore bends any radious and jointed in solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) junction single, (SingleT) equal or unequal and jointed in solvent cement complete all as specified and directed.

S&F of 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 including demolition of brickwork, built in cement mortar complete all as specified and directed.

M&L for mild steel TMT bars 8 mm dia or over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hookings ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for reinforced cement concrete (Nominal mix) 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in foundation, raft, basement slab including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided complete all as specified and directed.

Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping etc) for rough flat concrete surfaces complete all as specified and directed.

Taking down aluminium doors n. exc 4 sqm each and refixing the same in existing position after carrying out necessary repairs with and including M&L for replacement of rubber & aluminium beading and jointing cleats, tightening if required including making good existing surface complete all as specified and directed. Note: Any aluminium style, rail, frame, floor spring, hydrulic door closer if required shall be replaced and will be measured and paid seperately under respecective items.

S&F in repairs 150 mm long floor door stopper of anodised aluminium alloy body and tonge with hard drawn steel spring and fixed complete all as specified and directed.

S&F of 150 mm long floor door stopper of anodised aluminium alloy body and tonge with hard drawn steel spring and fixed complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for galvanised cold rolled steel section frame work size 600 x 600 mm grid size, 24 x 38 x 0.50 mm (composite thickness) Tee (bottom pre-coated) and size 24 x 24 x 0.50 mm (composite thickness) thick wall angle, galvanised cold rolled steel section including suspenders as per (Gapsec) manufacturs insturctions as in ceiling including dismantling of old wall and ceiling boards (Fibre, Pulp, Insulation etc.) or insulation board/ slabs/ blankets, any thickness including cover fillets complete all as specified and directed.

M&L for asbestos free calcium silicate board of size 600 x 600 x 6 mm thick, fixed to steel frame work as in ceiling with and including applying two coats of oil bound distemper complete all as specified and directed.

S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight - 210gms) complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc; from tanks and from mouths of circulating pipes complete all as specified and directed.

S&F in replacement 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), triple layer, hoisted and fixed in position with and including 20 mm dia PTMT float valve complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, sub base and mass concrete including demolition of existing cement concrete in floors and pavings not exc. 15 cm thickness (below/above ground level) including floor finishes concrete complete all as specified and directed.

M&L for cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in sunken filling, mass concrete or similar work including demolition of existing cement concrete in any position complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like with including bitmuminous mastic filling in 1:3 joints (in every 3.00mtr) and finishing the surfaces even and smooth without using extra cement including demolition of cement concrete in floors and pavings not exc. 15 cm thickness (below/above ground level) complete all as specified and directed.

M&L for 10 mm thick heavy duty flooring tiles, harsh weather and UV resistance, high abrasion resistance, MOH hardness >6 and area of each tile not less than 0.09 sqm, anti slip type laid in floors, steps, edges etc; over and including 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile including dismatling of existing tiles, screed bed and removal of debrises from the premises complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block (reflective type) in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

M&L for clean dry sand filling under paver block for leveling including watering and consolidation complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20 mm graded stone agg) as in coping, benching etc; for drain and similar works complete all as specified and directed.

S&F of 200 mm dia (DWCPE pipe) class SN-8 structural wall polyetylene (Pipe with online coupler and elastomeric rubber ring) with hollow annular smooth outer surface and a smooth inner surface (double wall plain) for nonpressure underground drainage and sewage application type B nomial size (Dn /ID) made of polyethylene (PE) material confirming to ISI 6098 (Part II : 2013 and to be transported handled installed and joied as per Annex A of ISI 6098 (part II :2013) including demolition or breaking up of salt glazed ware, AC or reinforced concrete drain pipes of 150 mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in any type of soils complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and directed.

Removal of surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in cover slab for manholes and similar work and set in cement mortar 1:4 including demolition of existing concrete work complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) any section embedded in concrete, masonry, brick work, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

S&F of mild steel works of angle iron or other sections as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; and flat iron fillets for securing wire mesh similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

Excavation in post holes in any type of soil (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm including removing of surplus soil complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire and dismantling of old fencing wire any type complete all as specified and directed.

Supply only chain link mild steel galvanised as in fencing, any size or type complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 8-10 mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors etc; over and including 15 mm thick screed bed in CM 1:6; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing and rubbish off the permises complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 8-10 mm thick (Square /rectangular) polished, area of each tile not exceeding 0.36 sqm on vertical surfaces such as skirting dado and risers to steps etc; over and including 10 mm thick rendering in CM 1:4; set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the permises complete all as specified and directed.

Taking down existing treatment from the roof including M&L for provn of water proofing treatment to non accessible / accesible roofs with APP modified membrane with non woven polyster reinforced of wt not less than 3 Kg/Sqm and thickness not less than 3 mm having thermal insulation with white or plain finish on upper side of membrane uniformly embedded during manufacturing process with and including comprising of following activities:-

(a) Providing 10 mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab. After the plaster is cured, the roof will be tested for water tightening by ponding with water for 72 Hrs for any seepage / leakages etc. if any seepage is oberved the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repaired the slab will be tested for water tightness before processing further treatments.

(b) The surface of the roof, parapet and gutters, drain mouths etc. over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the groove shall be cut around to tuck in the treatment as pipes, chimney stacks etc. and other similar situations to ease up about corners.

(c) Applying hot blown bitumen VG-10 as primer conforming to IS: 3384 -1965 @ 0.30 Kg/Sqm on prepared surface till the surface is properly impregnated.

(d) Applying APP modified water proofing membrene as specified shall be laid by torch application method, laid on hot bitumen 85/25 grade (bonding material) at the rate of 1.2 Kg/sqm on primed surface as per manufacturers instructions. The overlaps while torching shall be 100 mm in both directions (longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer.

(e) All joints & changes in direction should be curved with cement morar 1:3 mixed with SBR latex @ 200 ml per bag of cement and cured well before laying the membrane.

(f) Providing fillet of PCC 1:2:4, type B-0 of 100 x 100 mm at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners /junctions should be rounded.

Deduct Schedule of credit (calculation will be done off line) Rs. 55745.00

M/s VIKAS TRADERS (BID ID -3392568)

SHIV SHANKAR MISHRA (BID ID -3394284)

MODI CORPORATION (BID ID -3385217)