Extension of HT Supply to TGSRTC, Midhani

S-GI Bolts & Nuts,Washers etc.,

Fabrication and connecting to risers from earth mat to structures,

Lay-DR 33KV 3x400sqmm UG Cb CC/BT Compsr

Erection of 33kv VCB

Erection of 33kv single phase PT s

Erection of 33kv CT s

Exca Hard pit w/o blast 0.76X0.76X1.83M

Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement

Grout-Breaker Plint for VCB Erection

Erection of 33kV Twin feeder control <(>&<)> Relay panel in the control room duly mounting them on channels and grouting them with foundationbolts excluding cost of channels <(>&<)> foundation bolts

Fabrication of Main and Auxiliary structures with power drilling using raw steel such as M.S.Angles, Plates, Channels, R.S.Joists, including the supply and fabrication of 6mm base and top plate for Box pole to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.

Construction of Plinth for mounting HT Trivector meter of size 0.6mx0.3mx 0.9m (0.6m above GL with Brick Masonary <(>&<)> 0.3m below GL with PCC 1:2:4 ) , with 1:2:4 CC bed 3" on top <(>&<)> with 1:4:8 CC bed 4" on bottom including cost of cement

Erection of HT Metering Box Including Cost of Meter Box

ERECTION OF EQUIPMENT Substations Erection of 33 KV AB Switch including alignment and earthing

TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials. Upto 10 KM

Coping & Muffing-Iron Pole

S-9" B Class GI pipe 7.3mm thck 28.8Kg/M

Excavation of earth pit, supply of cast iron pipe with flange on one end (as per ISS7181/86) of nominal dia 125mm and 2.75 meters long in side the pit including supply and fixing RCC collars 0.75 meter dia (OD), 50mm thick and 0.60meters long complete as per APTRANSCO standards

S-CI Pipe earthing 100mm dia 2.75m long

Testing & Commissioning of Equipment

Hring of Crane for mounting equipment

Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.

(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .

(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes,etc.

Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium

LOADING & UNLOADING 33/11 KV CTs/ PTs

UNLOADING of 33/11 KV CTs/ PTs

LOADING & UNLOADING24 V Battery with charger

S&F MS Security Fencing Mesh (2"X2")

CIVIL WORKS :Excavation of pits in all soils except hard rock requiring blasting.0.92 M x 0.92M x 2.3M (3.0" x 3.0" x 7.6")

Cement concrete 1:3:6 ration with 40 MML HBG metal including the cost of all materials and labour complete 1.8 x 1.8 x 0.75 Cum. forVCB plinth

Excavate-Pit for 33KV VCB

Supply of Danger boards with clamps

Painting of Name Plates for any equipmen

Fix-GPRS Modem & Sim Card

Raise-DR 33KV 3x400sqmm UG Cb on support

Load-11/33KV XLPE UG Cable for all sizes

Unload-11/33KV XLPE UG Cable all sizes

ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable

ERECTION OF LINES : UG Cables Jointing : Straight through joints 33 KV 3 x 400 Sqmm XLPE Cable

UNLOADING of 33 KV AB SWCH Con 400/800 A

LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A

Erect-33KV DP Structure with RS Joist

SupRubber mats( 6’x3’)size for indoorSS

Lay-4C/10C 2.5Sqmm Control Cable

Supply of Hand Gloves

Supply of Gum Boots

Formation of Horizontal Cut point for 33 KV line excluding pole erection and stays including bolts <(>&<)> nuts etc.,

Laying of earth mat including excavation of trenches of depth 600mm,

Testing of Outdoor Sub-station switchgear duly conducting the pre

Supply <(>&<)> Spreading of 20mm machine crushed metal(HBG) including cost and conveyance of all materials, labour charges etc. complete for finished item of work and as directed by the engineer-in-charge

CT stud clamps with hot dip galvanised bolts and nuts suitable for zebra / Panther conductor on one side and 28/30/40 mm CT stud on other side with stud size for single zebra / panther (4 bolted) with bimetallic sleeve for carrying 800 A

Alluminum LA clamps conforming to A6 of IS 617, with hot dip

Erect-12Meter Box pole

Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of inner phasing with red Oxide before Joining as box pole.consumable, Painting of RS Joist on

Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.

Alluminum alloy T clamps conforming to A6 of IS 617, 4 bolted with hot dip galvanised bolts and double nuts with spring and flat washers of size M10 x 65 i.e(3/8" x 21/2 " to suit for panther ACSR on all three ways /on one side and Zebra ACSR on take off side or any other combination for carrying 800 A current rating .

Connection of equipment to bus and or another equipment with single zebra/Panther conductor including measuring, cutting,clamping and hoisting of suspension insulator assembly to support the conductor wherever necessary.

Load-PVC Control Cable 10C

UnLoad-PVC Control Cable 10C

CRS Masonary CM(1:6) 2nd Sort

LOADING & UNLOADING 33 KV VCBs along with Panel boards

UNLOADING of 33 KV VCBs&Panel boards

S-MS Bolts & Nuts,Washers etc.,

CIVIL WORKS : Excavation of pits in hard rock requiring blasting.0.76 M x 0.76M x 1.52M (2.6" x 2.6" x 5.0')

LOADING & UNLOADING R.S. Joists 175 x 85 mm

UNLOADING of R.S. Joists 175 x 85 mm

ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud

ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he

Stringing of bus with panther conductor including jumpering etc., complete to all the equipment in SS fixing to all clamps and equipment.

ERECTION OF EQUIPMENT Substations Erection of 33 KV LAS station type including earthing

Erect-24V Batery with Chrgr incl grot-SS

Seigniorage Charges - Metal

Seigniorage Charges - Sand

Supply & Fixing MS Gate

Excavation in Ordinary Soil

PCC with 40mm Metal (1:4:8)

Brick Masonary in CM(1:6) GFloor

ERECTION OF LINES : Erection of pole in position, aligning and setting to work, fixing of cross arms and top clamps, earthing of supports, back filling with earth and stones properly ramming including transport of materials from road side to location ex

Construction of Plinth old type with CC 1:3:6 for mounting 3 Way RMU (2Nos Plinths size 3'6"x1'x1'6" above GL and 3'6"x1'6"x1'6" below GL) and plastering including cost of cement 0.7434 cumt @ 3430

Erect-33KV 3 Way RMU

ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable

Construction of Plinth old type with CC 1:3:6 for mounting 3 Way RMU (2Nos Plinths size 3'6"x1'x1'6" above GL and 3'6"x1'6"x1'6" below GL) and plastering including cost of cement 0.7434 cumt @ 3430

Erect-33KV 3 Way RMU

ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable