Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.7 LAccepted-AOC GARUBANDHA MISSAMARI DIST SONITPUR ASSAM 784506 | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹57.8 L+₹5.8 L (11.2%)Rejected-Finance RANGAPARA TOWN WARD NO 1 PS PO RANGAPARA DIST SONITPUR ASSAM | L2 | Rejected-Finance HIGH BID VALUE | |
| 3 | L3₹62.8 L+₹10.8 L (20.7%)Rejected-Finance VILL LAKHOPARA PO GARUBANDHA DISTT SONITPUR ASSAM 784506 | SONITPUR | ASSAM | 784506 | L3 | Rejected-Finance HIGH BID VALUE | |
| 4 | L4₹64.8 L+₹12.8 L (24.6%)Rejected-Finance P O P S MISSAMARI DIST SONITPUR ASSAM 784506 | SONITPUR | ASSAM | 784506 | L4 | Rejected-Finance HIGH BID VALUE | |
| 5 | L5₹65.8 L+₹13.8 L (26.5%)Rejected-Finance LAKHPURA BUTCHERY MISSAMARI DIST SONITPUR ASSAM PIN 784506 | MISSAMARI | SONITPUR | ASSAM | 784506 | L5 | Rejected-Finance HIGH BID VALUE |
Tender Value
₹78 L
EMD Value
₹1.4 L
Closing Date
20 Apr 2023, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL GANESH ZAPE
HQ CWE TENGA PIN - 900194 C/O 99 APO
REPAIRS/REPLACEMENT OF TILING, PLASTERING PLUMBING AND SANITARY APPLICANCES AND MIS REPAIR IN MD/OTM ACCN ANDVARIOUS TYOES OF B/R EXTERNAL SERVICES IN HQ 71 INFO DIV AREA UNDER GE MISSAMARI.
2023_MES_584249_1
8341/E8
Open Tender
Civil Works
Item Rate
270 days
GE MISSAMARI
C b(ii)
8 documents required · 8 mandatory
₹1,000
GE MISSAMARI
₹1.4 L
Yes
15 Jun 2023
15 Mar 2023
26 Apr 2023
15 Mar 2023
20 Apr 2023
6 Apr 2023
Amount
Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing,dressed stone work and precast concrete articles complete all as directed.
M & L for burnt brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.
M&L brick work with sub class'B' bricks, straight or curved on plan exc 6m radius in half brick wall built in CM 1:4 complete all as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.
M&L 15mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:6 , complete all as specified and directed.
M&L 10mm thick cement plaster on ceiling surfaces without using extra cement finishing fair and even in CM 1:4 including necessary scaffolding complete all as directed.
M & L for 20 mm thick plastering in two layers, 10 mm each in cement mortar 1:4 with water proofing compound (@ 2% by weight of cement or as per manufacture's instructions) on brick/stone walls or concrete surfaces finished even and fair ( upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as under relevant item.
Supply only liquid water proofing compound.
Material , labour of treatment of existing wall surface with tartaric acid or oxalic acid to remove all the existing salt from the surface then rinse the entire wall surface and applying of 15 mm thick two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days , 7MPa at 28 days respectively ( maximum coverage area 1.3 sqm per 25 kg pack @ 10 mm thickness) over a coat of epoxy Bonding agent on existing surface and morter shall be applied in layers n.exc 6mm thick in layers and including surface preparation as per manufacturers instruction complete all as specified and as directed Make(polymer modified reinstatement mortar):- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP as approved by GE.
Material and labour for 2 coats of oil bound distemper over a coat of primer on internal plastered surfaces including one coat of putty (minimum thickness 1.5mm) after preparation of surfaces complete all as specified and as directed.
Preparation of new plastered surfaces and applying three coats of white wash on ceiling all as specified and directed.
Preparation of new plastered surfaces and applying three coats of white wash on wall all as specified and directed.
M&L applying two coat of cement base paint over a coat of cement base primer on newly plastered surfaces of walls including preparation of surfaces.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc 15 cm thick below or above ground level.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, all as specified and as directed by the Engineer-in-Charge.
Demoliton of stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded and pointed in any mortar complete all as specified and directed.
M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises.
M&L vetrified (coloured) ceramic tiles 10mm thick (square/rectangular) polished, area of each tile not exc 0.36 sqm as in floor, laid over and including 15mm thick screed bed in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of floor all as specified and directed.
M&L light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile not exc 0.36 sqm as in floor, laid over and including 15mm thick screed bed in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of floor all as specified and directed.
M&L light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile not exc 0.36 sqm as on vertical surfaces such as skirtings, dados, risers etc over 10mm thick cement plaster in CM 1:3 complete all as specified and directed.
M & L ceramic non skid coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc., laid over and including 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile surface all as specified and directed.
M & L ceramic non skid coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as on vertical surfaces such as skirtings, dados, risers etc over 10mm thick cement plaster in CM 1:3 complete all as specified and directed.
M&L 300x200x7 mm thick Glazed ceramic coloured tiles in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick backing layer in cement mortar 1:4, Complete all as directed.
M&L 450x300x7 to 8mm thick, glazed ceramic tiles, set and jointed in neat cement slurry and pointed in white cement mixed with pigment as in vertical surface including 15mm thick backing in cement mortar 1:4 all as specified and directed.
M & L for Endura tiles of size 300 x 300x 10 mm thick, suitable for hi-traf external tiles, anti skid, scratch resistance and neutral to UV rays and acid alkali resistance as in floor including 15mm thick screed bed in cement mortor 1:4 complete all as specified and directed.
Materials and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick laid over 20mm thick screed bed in CM 1:4 with cement slurry mixed with pigment on stairs complete all as specified and as directed.
M& L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified as directed.
M& L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick cement screed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified as directed.
M & L 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete allas specified as directed.
M & L for 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified as directed.
M & L for taking out compete existing roof treatment from roof surface & roughening of old concrete floor surfaces including cleaning the roof surfaces by brushing sweeping etc and removing rubbish material, complete all as specified and directed.
M & L for brushing neat cement slurry with 3.0 Kg of cement per Sqm, complete all as specified and directed.
M & L for 40 mm thick PCC 1:2:4 type B-0 (12.5 mm graded aggregate ) as in roof padding complete all as specified and as directed
M & L for rendering 15mm thick on fair faces of concrete surfaces in cement mortar 1: 4 under APP membrane finish rendering surfaces even and smooth with out using extra cement mixed with WPC @2% by weight of cement or as per manufacturer instruction. Complete all as specified and directed (Note:- WPC shall be mesured and paid separately)
M & L for for water proofing treatment on existing cleaned RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:- (a) Preparing and clening of fully dry surfaces as per IS3067-1966 (b) Applying bitumen primer conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm (c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.0Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application. The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (d) Applying one coat of aluminium paint @0.10 ltr per sqm over APP based polymeric membrane.
Material and labour for 75mm thick PCC 1:3:6 type C2as in plinth protection complete all as specified and as directed.
Material and labour for 100mm thick PCC 1:3:6 type C2 as in foot path complete all as specified and as directed.
Material and labour for forming Contraction (Dummy)joints 65mm deep x 10mm wide,filled with sealing compound Grade Ä
M & L for machine presed precast concrete interlocking paver block any shape with gray cement and pigment and size conferming to IS 15658-2006 of 60 mm thickness , M-35 grade all as specified and directed
M & L for sand filling under floor (sand cosining for interlocking paver block) including watering and well ramming all as specified and directed.
M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Cover Slab (man holes, Septic Tanks),shelve etc set in Cement Mortar 1:4 including necessary forms, moulds, etc., complete all as specified and as directed.
M&L TMT Bars 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.
M & L for dismantling timber scantling 40 Sqcm and over in section in any position, unframed work complete all as directed by Engineer-in-Charge.
M& L in repairs 2nd class hardwood scantling to replace old and decayed timber (including piecing, scarfing, etc, of old and new timbers if required) and removing defective portion complete all as specified as directed.
M & L for dismantling of wooden fillet, rail posts, rafters, purlin etc under 40 sqcm in section complete all as specified as directed
M&L 2nd class hard wood plain fillets. square, rectangular or triangular in section n exc 3 sqcm , clean sawn, secured with nails or brads, complete all as specified and directed.
M&L 2nd class hard wood plain fillets. square, rectangular or triangular in section exc 3 sqcm but n exc 6 sq cm , clean sawn, secured with nails or brads, complete all as specified and directed.
Material and labour for 2 coats of synthetic enamel paint over a coat of pink primer on wooden surface of of any description n exc 10cm width or girth when unconnected with other painted or when painted in different tint complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n exc 1.5 sq.m each .
Taking down chowkats or frames with shutter (without taking off shutters from the frame), area exceeding 1.5 sqm but not exceeding 4 sqm each.
Taking down shutters of any descriptions n exc 1 Sqm each .
Taking down shutters of any descriptions exc 1 Sqm but n exc 2 Sqm each .
Taking down shutter of any description exc 2 Sqm each.
Taking down shutter only and re-fixing in same opening after planing, chesling the shutters of any description n exc 1 sq. m each
Taking down shutter only and re-fixing in same opening after planing, chesling the shutters of any description exc 1 sq. m but n exc 2 sq. m each
Taking down shutter only and re-fixing in same opening after planing, chesling the shutters of any description exc 2 sq. m each, complete all as specified and directed.
S& F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including additional rebate for second shutter, complete all as specified and directed.
Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
S& F 2nd class hard wood factory made 35mm thick plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm verneerd particle board with commercial veneering on botj faces the size of rail and stile as per IS: 1003 (Part 1) Kiln seasoned and chemically pressure trated, complete all as specified and directed.
S& F 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed.
S& F 2nd class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed.
M&L Second Class Hardwood 30mm thick Glazed and Skeleton Shutters, open rebated and prepare to receive Glass, Gauge, etc. divided into Squares with Plain Chamfered or Rounded, mitred Sash Bars of any Numbers, Edges of Framing plain chamfered or rounded fitted with cut and mitred Beads for securing Glass, etc sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(b) and fitted to Wooden Chowkat, complete all as specified and as directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified and as directed.
Supply and fixing factory made solid PVC door shutter 30mm thick consisting of frame made out of M.S. tubes for top & bottom rails complete all as specified and as directed.
S & F Factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30mm thick (stiles) with 2,4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, fixing frame at site as per specification & drawing complete all as specified and as directed.
Materials and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills,copings, kneelers, apex stones,bed plates etc complete all as specified and as directed.
Supply and fixing mild steel hold fast for door/ window complete all as specified and as directed.
Supply and fixing aluminium door and window/Vent frame complete all as specified and as directed.
S&F Aluminium door with powder coated standard aluminium sections of medium size and weight not less than 1.90 Kg/Rm and conforming to catalogue of Jindal or equivalent. The door shall be of side hung type fixed at bottom with standard door spring, pintals etc. The bottom panel of the door shall be fitted with 12 mm thick prelaminated particle board decorated on both sides of approved colour and 5.5 mm thick tinted glass in top panel complete including all necessary fittings such as 02 Nos handles of approved size and shape, 02 Nos Aluminium anodised tower bolts 200 mm long and 01 No mortice lock per shutter. The shutter frame shall be with one or more rebates including jointing cleats, glazing clips, standard rubber beading complete all as specified and directed.
S&F, Powder coated aluminium sliding window with shutter styles 40mm x20 mm sheet thickness 1.5mm Two shutter of glass and one shutter of wire mesh consisiting of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100mmx44mmx1.5mm thick section with or without rebate 5.5mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter incl aluminium grill all as directed by the Engineer-in-Charge.Note: Size of window shall be as per site requirement.
S&F Powder coated anodised aluminium window grills of size 75 X 75mm having section width 6mm and 3mm thick fixed on aluminium section weighing not less than 0.55 Kg/Sqm including necessary jointing fittings etc all as per manufactures instruction complete all as specified.
Taking down aluminium door shutter, partition, aluminium sliding window and refixing the same with required cutting readjusting and resizing of glass panes as per site condition,complete all as specified and as directed
S&F fabricated aluminium anodised doors, windows, partitions and ventilators using aluminium sections of size and type approved by Engineer-in-charge including jointing cleats, snap beading etc complete all as specified and as directed
S&F rubber gasket of aluminium door, window and partition wall for fixing glass panes or prelaminated particle board etc. complete all as specified and as directed.
S&F in repair Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners,MS handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as directed by the Engr-in-Charge.
Repair to steel window / door / gate including necessary welding, riveting, easing, drilling, taking down, replacement of unserviceable hinging device, handles, making them in serviceable condition and re-fixing in same opening , complete all as specified and directed.
Taking down existing rolling shutter of area nexc 12.00Sqm each, replacing damaged parts such as guide channel;shaft, ball bearing, laths,locking system,hood incl necessary welding as required and refixing in position etc complete all as specified and directed by Engr-in-Charge Note; spare parts required will be measured and pad separately under respective items.
S&F steel rolling shutters area nexc 8.0 sqm of laths thickness 1.00 mm , with out ball bearing , as specifed including top cover , anchoring rod, hasp and staple erected in position as incicated complete and two coats of synthetic enamel paint over a coat of primer as directed by the Engr-in-Charge.
Overhauling and greasing of existing rolling shutters of area n exc 8.00 Sqm any type for proper functioning after taking down top cover and refixing in same position, complete all as specified and directed.
S&F in repair safety lever locks mild steel with 4 levers for rolling shutters as directed by the Engr-in-Charge.
supply only ball bearing for rolling shutters as as directed by the Engr-in-Charge.
supply only guide channel complete all as specified and directed by the Engr-in -charge.
supply only locking system for rolling shutter complete all as specified and directed by the Engr-in -charge.
Supply and fixing mild steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete all as specified and as directed.
Supply and fixing mild steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and as directed.
Supply and fixing mild steel guard bars for steel window complete all as specified and as directed.
S& F of Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.
S& F as in repair of Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane.
Supply and fixing 4mm thick frosted glass for toilet ventilator complete all as specified and as directed.
Supply and fixing 4mm thick floated sheet glass for steel window complete all as specified and as directed.
Supply and fixing 5.5mm thick plain ordinary sheet glass for Al door/ window complete all as specified and as directed.
Supply and fixing prelaminated particle board 9mm thick , interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work
Material and labour for 2 coats of synthetic enamel paint over a coat of pink primer on wooden surface of doors including preparation of surfaces complete all as specified and as directed.
Material and labour for 2 coats of synthetic enamel paint over a coat of pink primer on wooden surface of treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc.,area n exc 0.1 sq. m each, including preparation of surfaces complete all as specified and as directed.
Material and labour for 2 coats of black japan paint on steel surface of treating Small articles such as knobs, fasteners, holdfast similar arti-cles, when unconne-cted with other pain-ting or when painted in a different tint, complete all as specified and as directed
M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Supply and fixing 100mm long stainless steel butt hinges complete all as specified and as directed.
Supply and fixing 100mm long Mild steel butt hinges complete all as specified and as directed.
Supply and fixing 75mm long Mild steel butt hinges complete all as specified and as directed.
Supply and fixing small articles with 2nd class hard wood complete all as specified and as directed.
Supply and fix 50mm long Mild steel butt hinges complete all as specified and as directed.
Supply and fixing 150mm long aluminium bow handle complete all as specified and as directed.
Supply and fixing 150mm long aluminium tower bolt complete all as specified and as directed.
Supply and fixing 200mm long aluminium sliding door bolt complete all as specified and as directed.
Supply and fixing 250mm long aluminium sliding door bolt complete all as specified and as directed.
S&F in repairs floor door stopper of brass body, polished with rubber cap fixed to door shetters with screws complete all as specified and directed.
S&F steel dead lock ,6 levers as in repair complete all as specified and as directed.
Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads and S&F 3mm thick sheet glass ordinary quality and glazing with oil putty square n exc 0.50 sqm in each pane.
S&F in repairs 150mm extruded aluminium alloy handles, fabricated type, anodised (Make : Alans or ISI marked)
S& F in repairs 200mm long aluminium anodised barrel tower bolts of extruded section.
S&F in repairs, 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S&F as in repair 100mm Stainless steel butt hinges medium weight.
S&F in repairs aluminium (extruded section body) hydraulically door closer universal type designation No 1 universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 kg.
S&F in repairs aluminium (extruded section body) hydraulically door closer universal type designation No 2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight not more than 36 kg to 60 Kg,
S&F Brass bracket for curtain rod decorative type fixed as in repair complete all as specified and as directed.
S&F in repairs ALUMINIUM powder coated 25mm dia decorated curtain rod with fixing brackets all as directed by Engr-in-Charge.
Dismantling structural steel work including doors, gates but excluding framed truss etc in any position complete all as directed by Engineer-in-Charge.
S&F Rolled mild steel in joist, channel, angle, or tee section fixed independently, without connecting plates, etc (cut to ordinary length ie. within 20mm of the length indicated) of FE-410- W(Gde-E-250) quality-B complete all as specified and as directed.
S&F Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works incl portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc confirming to grade Fe-290. Gde-E-165, complete all as specified and directed.
M&L Framed Work such as Ornamental Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed.
M&L Bands, Straps, Supports or Stays for Rain Water, Ventilating Pipes including Bolts, if required, Hooks (Stay), heavy, for Large Gates; Hook and Pintle Hinges, Large Hasps and Staples; Chains; Hand Made Sliding Bolts; Clamps; Holdfasts; Wall Ties; and Similar Small Articles, conforming to Fe-290 Gde E-165, complete all as specified and as directed.
Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheetng 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall ,fixed with self tapping screws as , complete all as specified and directed.
S & F of pre-painted color galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
S & F mild steel wind ties for roof including securing bolts complete all as specified.
M&L for preparation of new surfaces of steel or iron surfaces of any description, nexc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Supply and fixing in repairs 2 mm thick fibre glass reinforced transulacent corrugated sheets fixed with 'L' or 'J' hooks, complete all as specified and directed.
M & L cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type B-I as required, complete all as specified and directed.
Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets
S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling complete all as specified and as directed.
S & F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.
S & F 4mm thick non asbestos fiber cement building board fixed ti GI /Aluminium frame works complete all as specified and directed.
M&L in repairs False Ceiling 'E' board "classic" reinforced,designer series, board with HPSC (High pressure Steam Curing) of size 600 mm x 600mm x 4mm thick fixed on old aluminium powder coated/GI snap grid. complete all as specified and directed by Engineer-in-Charge. Note : Existing ceiling boards from ceiling as required and as directed by Engineer-in-charge shall be replaced.
S & F for GI frame work seamless ceilling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall useing nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick two equal flanges of 15 mm each and web of 45 mm seuspended from soffit at approx 900 mm C to C with GI cleat and steel expansion fasteners with and including cilling section ( not exc 1.2 m length ) of 0.55 mm thicknes having kurled web of 50 mm and flang of 25 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457 mm C to C complete all as specified and directed by Engineer-in-Charge.
M&L in gypsum board 12mm thick in ceiling fixed with screw as per manufacturer's instructions and applying two coat of oil bound distemper over 3mm thick putty complete all as specified and directed by Engineer-in-Charge.
S& F as in repair 12 MM thick perforated partile board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with screw to timber framework or with staples on snap grid as in ceiling, sloping, flat or sloping etc complete all as specified and directed. Note : Existing ceiling boards from ceiling as required and as directed by Engineer-in-charge shall be replaced.
S& F as in repair 12 MM thick perforated partile board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with screw to timber framework or with staples on wall as in sloping, flat or sloping.
Dismantling boarding, any description, any type, fixed in any position with nails including cover fillets all as directed
Supply and Fixing PVC solid wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction and as directed by the Engineer-in-Charge.
Supply and Fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.
S&F PVC decorative beading of 5mm thick moulded/designed for PVC wall panneling inclusive of fixing complete all as specified and directed.
Up rooting of tree from walls of bldgs up to extranded root and spraying of Muratic Acid required quantity complete from any location of bldg up to ten stories and making good disturbed surface with cement mortar(1:4) or cement concrete type C1 (1:3:6) using 20mm graded aggregate complete all as specified and directed.(Any storey)
S & F glazed tiles 300mmx300mmx7mm thick white plate printed with buliding no.(letter ht not exc 20 cm) fixed on wall in cm 1:4 complete all as specified as directed by engr in charge
Taking up or down 15 mm bore steel tubing and connection incl cleaning for refixing all as specified and directed.
Taking up or down 20 mm bore steel tubing and connection incl cleaning for refixing all as specified and directed.
Taking up or down 25 mm bore steel tubing and connection incl cleaning for refixing all as specified and directed.
S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors.
S&F tubes 20mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors.
S&F tubes 25mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors.
Cutting chases for water tubing, pinning in making good to facing where required in CM(1;3) to brick wall cutting grith n.exc. 10cm girth complete all as directed.
Demolition of unserviceable nahani traps / broken gully trap floor trap of any description and removing material from site.
S & F 100 mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified
S & F 100 mm cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified
S&F in repairs bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete as directed and specified..
S&F in repairs Bib tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms/20mm-125gms) complete as directed and specified..
S & F as in repair 15 mm pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , complete all as specified and directed.
S&F as in repair 15 mm bore angular stop valves cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore of pipe fixed, complete all as specified and directed.
S&F as in repair 15 mm bore stop valves cast copper alloy,fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore of pipe fixed complete all as specified and directed.
S&F chromium plated brass corner glass shelf with brackets, as in repair complete all as specified and as directed.
S&F chromium plated brass chromium plated toilet paper holder, as in repair etc. complete all as specified and as directed (Make: ESS, Cat No: AC-206 / JAQUAR, Cat No: AKP-35751P/ CERA, Cat No: F5004109 or equivalent model in KOHLER / MARC / CRABTREE / HINDWARE / PARRYWARE)
S&F chromium plated brass Towel ring, as in repair etc. complete all as specified and as directed.
Supply and fixing as in repair 600mm long brass chromium plated 20mm dia 'D' type towel rail complete all as specified and as directed.
S&F chromium plated brass fancy type soap dish,as in repair etc, complete all as specified and as directed.(Make : Ess-Ess or equivalent)
S&F chromium plated brass two-in-one bib cock with wall glange, fixed with 15mm bore iron pipe as in repair etc. complete all as specified and as directed.
S&F chromium plated brass three-in-one wall mixture with provision for both over head shower with 115mm long bend pipe as in repair etc. complete all as specified and as directed. (Make:Ess-Ess, jaguar or equivalent
S&F 15mm bore chromium plated sink cock with raised 'J' shaped swinging spout (table mounted model) complete all as specified and directed. (Make : JAQUAR or equivalent model in PARRYWARE / HINDWARE)
S&F chromium plated brass over head shower with arm, as in repair, fixed to 15mm bore of iron pipe complete all as specifeid and dircted
S&F chromium plated 15mm bore health fucate with 1.2m to 1.5m longeasy flex tube with hook (Foma: full Ivory), as in repair etc. complete all as specified and as directed. (Make: Ess-Ess, or equivalent
S&F chromium plated 15mm dia CP hand shower with 1.5mtr flexible tube & with hook (Foma: full Ivory), as in repair etc. complete all as specified and as directed. (Make: Ess-Ess, or equivalent
S&F SS jetspry (L-bend) with braided tube 1.5 Mtr,as in repair etc, complete all as specified and as directed.(Ess-Ess or equivalent
S&F as in repair Shower panel with hand shower, 4 horizontal massage body jets with over head shower complete all specified and as directed. (Make: PARRYWARE, Model: VERVE / CERA, Model: CHARIS or equivalent model in HINDWARE / JAQUAR)
S&F PVC mirror cabinet( coloured) of size 650 x 450 x 100mm to 125mm depth, fixed to wall including all accessories etc. as in repair complete all as specified and as directed. Make: Prayag. Model No-D664-M, or equivalent
S&F 6.0mm thick looking mirror mounted on 6mm thick acrylic sheet board backing, fixed as in repair with chromium plated screws and cup washer complete all as specified and as directed.
Supply and fixing as in repair vitreous china wash hand basin, white of size 550mm x 450mm complete all as specified and as directed.
S&F Vitreous china wash down water closet pan (pedestal pattern white) fixed in repair complete all as directed.
S&F Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repair complete all as directed.
S&F cascade type (coloured) wall mounted water closet with 10 litre capacity low level flushing cistern and flush pipe coloured with floor trap, PVC coloured seat cover and connecting fittings as in repair etc complete all as specified and as directed.(Make:Parryware cascade NXT, cat No C-0208,C-0758,C-2054,C-8286 & C-8017or equivalent
S&F 10 ltr capacity PVC valve less, Symphonic action type flushing cistern. Low level white with inlet, ball valve float and handle including bracket including PVC connection fixed in repair complete all as specified and directed by Engr-in-Charge
S & F in repairs PVC connection pipe 600 mm long with two nos PTMT nut threaded coupling for 15 mm dia
Supply and fixing of waste coupling of 32mm bore of discharge pipe, PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed.
Supply and fixing of waste fitting of 32mm bore of discharge pipe, brass,chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
Supply and fixing of 32mm bore of discharge pipe, Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenchescomplete all as specified and as directed.
Supply and fixing of PTMT grating dome 125mm dia (minimum wt 40 gms) and fixed in repair complete all as specified and as directed.
S&F in repair of 500 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical verticle with closed top) hoisted and fixed in position including suitable float valve and tank cover complete all as specified and directed (Make:Sintex or equivalent).
S&F in repair of 1000 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical verticle with closed top) hoisted and fixed in position including suitable float valve and tank cover complete all as specified and directed (Make:Sintex or equivalent).
S&F in repair 25 mm Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe mini weight 142 grams.
Supply and fixing as in repair 20 mm bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
Supply and fixing as in repair 25 mm bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
M&L PCC( 1:4:8) type D2 (using 40mm graded aggregate) in Foundations, Filling and Mass Concrete including use and waste Formwork as ordered/required at Site, complete all as specified and as directed.
M&L Brick Work with Sub-Class ‘B’ Bricks (with modular size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L Brick Work with Sub-Class ‘B’ Bricks (with modular Size Bricks), less than half brick thick on wall built in cement Mortar 1:3, complete all as specified and directed
Dismantling Bricks (laid Flat in Floor or laid on Side Walls of Brick Drains, Channels), etc., Bricks laid, bedded and pointed in any Cement Mortar, complete all as specified and as directed.
M&L Brick Work with size Sub-Class ‘B’ Bricks, laid on Edge as Side Walls of Brick Drains in Slope, Bedded and Jointed in Cement Mortar 1:6 and Pointed in Cement Mortar 1:3, complete all as specified and as directed.
M & L for PCC (1:3:6) type C2 (using 40mm graded aggreagte) as in surface channel and drains etc, complete all as specified and directed
M&L for 100 mm thick cement concrete type B-2 (1:2:4) using 20 mm graded stone aggregate as in path/hardstanding/sub base, complete all as specified and directed
M&L for providing Pre-cast cement concrete1:2:4 block masonary with solid blocks, exc 10 cm in width and setting in morter 1:4, complete all as specified and directed
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as specified and directed.
M&L Heavy duty (Dura stone) Coloured Ceramic Tiles 300x300x8-10mm thick, in Floors, set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.
M & L for rredndering in cement mortar (1;4) 15MM thick finished even and smooth on concrete /brick masonry wall surfaces, mixed with WPC & 2% of cement, complete as specified and directed. (Note : WPC shall be measured and paid separetely)
M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth, complete all as specified and directed.
Supply only integral water Proofing Compund complete
Dismantling posts or struts (RCC/Steel ) any section embedded in natural ground, including taking out embeded portion and making good disturbed ground in any type of soil complete all as specified and directed.
Excavation in post holes or simillar hole each n exc. 0.5 cum, getting out, returning , filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25cm in soft/loose soil .
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
S&F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to Fe-290 (Gde-E-165) complete all as specified.
M&L for MS work for fencing post and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -330, with and incl necessary nut and bolts of 12mm dia of reqd length ,complete all as specified and directed.
Dismantling fancing wire mesh, any type, complete all as specified and directed.
Supply only chain link MS galvanised any mesh size or type , complete all as specified and directed
Fixing only chain link fencing including line wire, any mesh, size and any type of standards rails straining bolt etc including provision of binding wire complete all as specified and directed.
S&F in repair Galvanised 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs straining and fixing to any type of standard rails straining bolts, includigng, securing or tying at crossings with and provision of steel wire, staples or steel pins, etc complete.
M&L two coats of cement base paint over a coat of primer on wall surface including preparation of surface, complete all as specified and directed.
United Traders
BEE KAAY TRADERS
M/S RANA ENGINEERING ENTERPRISE
Satya Enterprises
Sunrise Enterprise
RC Madan
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .