REPAIRS AND REPLACEMENT OF FLOORING, TILING, WALL PANELING, CEILING RELATED ITEMS IN BLDGS OF AREA II UNDER AGE B/R (CENTRAL) AT GE (W) COLABA, MUMBAI

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MoD land complete all as specified and directed.

Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Anti-termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per Sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc, material and labour complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron, material and labour complete all as specified and directed.

Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole , 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, material and labour complete all as specified and directed.

Anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, material and labour complete all as specified and directed.

Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm center to center and sealing the same, material and labour complete all as specified and directed.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MoD land complete all as specified and directed. Note : Height of Bldg up to fourth floor.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MoD land complete all as specified and directed. Note : Height of Bldg Fifth Floor & above up to Eighth floor.

Material and labour for old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisel & hammer after that cleaning of rust from mild steel rod and applying cement spray 3.00 Kg per sqm by paint brush over cleaned surfaces, including 20-50 mm thick ready mix plaster in Multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished even and fair including three coat white wash complete all as specified and directed.

Material and labour for 15 mm thick ready mixed plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, for height of bldgs upto Four stories, complete all as specified and directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Material and labour for 15 mm thick ready mixed plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, for height of bldgs Five storey & above upto Eight stories, complete all as specified and directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Material and labour for 12 mm thick Ready Mixed Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and finished even and smooth without using extra cement, complete all as specified and directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer through authorised applicators of paint manufacturers only, of approved shade complete all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints, as approved by GE.

Material and Labour for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints, over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs complete all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints, as approved by GE.

Material and Labour for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from fifth floor & above upto Eight storeys height of bldgs complete all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid .

Supply & fixing in repairs vitreous china, white, wash hand basin flat back size 550 x 400mm excluding taps, waste, chain, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand complete all as Specified and directed. Make : Cera/ Parryware/ Hindware, sample as approved by GE.

Supply & fixing for pillar taps cost copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed all as Specified and directed. Make : Cera/ Prayag/ Jaguar, sample as approved by GE.

Supply & fixing in repair Chromium plated brass angle valve for 15mm bore pipe, fixed in repairs complete all as Specified and directed. Make : Cera/ Prayag/ Jaguar , sample as approved by GE.

Supply & fixing in repair, two way angle valve cock chromium plated brass fancy type bore 15mm complete all as Specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE.

Supply & fixing in repairs plastic seat cover black/white of pattern EPWC including fixing divice and Chromium plated nuts, complete all as Specified and directed. Make : Cera/ Prayag/ Hindware, sample as approved by GE.

Supply & fixing in repair vitreous china wash down water closet of Pedestal pattern, white including making connection to trap and to flushing pipe etc complete and making good to floor complete all as Specified and directed. Make : Cera/ Parryware/ Hindware, sample as approved by GE.

Supply & fixing in repair CP brass toilet paper holder, superior quality complete all as specified and directed. Make : Cera/ Prayag/ Jaguar, sample as approved by GE.

Supply & fixing in repair CP brass, soap dispenser, superior quality complete all as specified and directed. Make : Cera/ Prayag Cat part No. BEA-20 / Jaguar, sample as approved by GE.

Supply & fixing Health faucet including PVC pipe 1.50m long with brass nuts for EWC, fixed in repairs complete all as specified and directed. Make : Cera/ Prayag/ Jaguar, sample as approved by GE.

Supply & fixing in repair PVC flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including brackets complete all as specified and directed. Make : Cera/ Prayag/ Hindware, sample as approved by GE.

Supply & fixing in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, complete all as specified and directed. Make : Cera/ Prayag/ Jaguar, sample as approved by GE.

Supply & fixing in repair sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 CM wide with CP bracket guard and railing 60 cm long complete all as specified and directed. Make : Cera/ Prayag/ Hindware/ Jaguar, sample as approved by GE.

Taking up or down steel tubing and connection 15 mm bore, complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm bore, complete all as specified and directed.

Supply & fixing UPVC pipes, out side dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc complete all as specified and directed.

Supply & fixing UPVC pipes out side dia 20 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S & F Steel tubing, medium grade, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors for 15 mm bore, complete all as specified and directed.

S & F Steel tubing, medium grade, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors for 20 mm bore, complete all as specified and directed.

Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 15 mm bore, including cleaning, cutting, threading complete all as specified and directed.

Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 20 mm bore, including cleaning, cutting, threading complete all as specified and directed.

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing debries out side MoD land complete all as specified and directed.

Material and Labour for first and premium quality of non skid, ceramic digital “coloured” matt finish joint less tiles of size 300 x 300 x 6-7mm or thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specifed and directed. Make : Johnson tiles / Kajaria / Orient Bell, sample as approved By GE.

Material and Labour for first and premium quality of non skid, joint free ceramic “coloured” tiles of size 400 x 400 x 6-7 mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specifed and directed. Make : Johnson tiles / Kajaria / Orient Bell, sample as approved By GE.

Material and Labour for first and premium quality of non skid, ceramic “coloured” tiles of size 400 x 400 x 6-7 mm thick, cut to size in vertical surface, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles, laid over and including 10 mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, sample as approved By GE.

Material and Labour for first and premium quality of Glazed ceramic coloured digital tiles 600 mm x 300 mm or 405 mm x 250 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match the shade of tiles, laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, sample as approved By GE.

Material and Labour for Vitrified Ceramic tiles dark or light shade /double charge /ultra charged 600 x 600 x 10-12 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, sample as approved By GE.

Material and Labour for Vitrified Ceramic tiles dark or light shade /double charge /ultra charged 10-12 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, sample as approved By GE.

Material and Labour for glazed ceramic exterior wall tiles 6 to 8 mm thick etc set & jointed in cement and pointed in coloured cement to match the shade of tile, laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified & directed. Make – Johnson (Endura) or equivalent in Kajaria / Orient Bell, sample as approved by GE.

Material and Labour for heavy duty outdoor vitrified tiles dark or light shade 10-12 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.16 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. Make : Johnson tiles / Kajaria /Orient Bell, as per approved sample as kept in GE Office.

M & L for 8 mm thick laminated wooden flooring, water resistant, termite resistant, polished flooring is a flating glue less click locked & sealed flooring similar to a jigsaw puzzle, idividule planks locked on the each other by means of the clicking together but do not attach to the sub floor on which it is being installed, fixed all as per manufacturers instructions through authorised applicator / technician of manufacturer, including dismantling of existing flooring complete all as specified and directed.

Supply & fix in repair Aluminium composite panel sheet 3mm thick PVCF wooden finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw (approved sample as kept in GE Office) as in ceiling/coloumns and in vertical surface complete all as specified and directed.

Material and Labour for Granite stone best quality (of any type & shade as approved by GE) 16-18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismentling of stone slab complete all as specified and directed.

Molding (Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing etc complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

Supply and fixing Solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. Make : Rajshree/ Navratan/ Sintex or equivalent, sample as approved by GE.

Supply and fixing 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed. Make : Rajshree/ Navratan/ Sintex or equivalent, sample as approved by GE

Material and Labour for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 complete all as specified and directed with following:- (a) Material and Labour for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm. (b) Supply and fixing 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners. (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) Supply and fixing E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE.

SN CONSTRUCTION

Frends Enterprises

PRABHU ASSOCIATES

M/s Radhika Enterprises

Pragathi Infrastructure Co.

SHRI SAI ENTERPRISES

Bidder Name

Frends Enterprises

SN CONSTRUCTION

SHRI SAI ENTERPRISES

D.S. Construction

PRABHU ASSOCIATES

Pragathi Infrastructure Co.

M/s Radhika Enterprises