COMPREHENSIVE REPAIR/MAINT WORKS AT PUF SHELTER AND SINGLE LIVING OFFRS SHELTER OF ILP-I UNDER GE PANAGARH

Amount

Demolition for brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.

M&L for brickwork with old size bricks flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed

All as per ser item above but except bricks. Note: Servicable bricks obtained from demolition shall be re-used after proper cleaning complete all as specified and directed.

M&L for old size brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, half bricks thick built in CM (1:4) complete all as specified and directed

M&L for 100 mm thick cement concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub bases complete all as specified and directed

M&L for 75 mm thick cement concrete type B1, for PCC (1:2:4) (using 20 mm graded stone aggregate) as in floors and pavings etc finishing cement concrete surface without using extra cement complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C2, for PCC (1:3:6) using 40 mm graded aggregate as in floors and pavings etc finishing cement concrete surface without using extra cement complete all as specified and as directed.

M&L for 50 mm thick cement concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub bases complete all as specified and directed

M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces incl. necessary form work in cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

M&L for Plain Cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

M&L for 75mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and paving complete all as specified and directed

M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for extra for forming fair finish drain channel upto 30 cm inner grith in cement concrete using extra cement complete all as specified and directed

M&L for red bajri / clinker filling in floors or pavings, laid in layers n. exc 15 cm thick spread, levelled and rammed including watering complete all as specified.

Demolition of cement concrete (reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed.

M&L for RCC (Nominal mix) Type B1 1:2:4 (using 20 mm graded stone aggregate) as in Chajjas complete all as specified and directed.

M&L for RCC (nominal mix) Type B1 1:2:4 (using 20 mm graded stone aggregate) as in floors, Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs and mass concrete complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat fair finished surfaces of concrete complete all as specified and directed.

M&L for Formwork to chajjas, troughs and similar items including edges flat with fair finished surfaces complete all as specified and directed.

M&L for mild steel TMT bar 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column, hooking end binding with binding wire and including mild steel wire(annealed) not less than 0.9mm dia complete all as specified & directed by Engr-in-Charge.

All as per item No 21.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Taking down cement or cement lime plaster, any descriptio on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for rendering 15 mm thick cement plaster in cement mortar (1:6) on brick work or concrete surfaces including finished even and smoothh without usig extra cement complete all as specified and directed

M&L for rendering 15 mm thick with WPC on external surfaces of brick work in cement moratr (1:4) including finished even and smooth without using extra cement complete all as specified and directed. Note : (WPC will be measured and paid separately)

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for rendering 5mm thick cement plaster in cement morar 1:3 on concret surfaces as in ceiling, chajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall and applying a layer of plaster of paris putty of 1 mm thickness over plastered surface and two coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying a layer of plaster of paris putty of 1 mm thickness over plastered surface and two coat of oil bound distemper complete all as specified and directed.

M&L for prepration of new surfaces of ceiling applying three coat of white wash complete all as specified and directed.

M&L for prepration of old surfaces of ceiling applying one coat of white wash complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl preparation of newly plastered surfaces of concrete complete all as specified.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces incl preparation of newly plastered surfaces of concrete.

M&L for removal and cleaning of vegetation on old fencing/security walls and removal of small plants of girth exc 5.0 cm and n.exc 30 cm including root from RCC/Brick/concrete surfaces up to a distance of 1.20 meter, pouring of acid chemical over root of plant surface and cleaning the area by removing/throwing the debris/vegetation etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc and similar work conforming to Fe 290 Gde-E--165 complete all as specified and directed

S&F framed work such as grills, gratings,etc,with ends of bars shouldered and /or riveted, or forged into spickes; framed guard bars; barried iron door;ladders;framed balustars; walk ways; railings; framed work of water tanks and similar work conforming to Fe 290 Gde-E--165 complete all as specified and directed

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, n.exc 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Renewing glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes complete all as specified and directed.

M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge

M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge

M&L for rendering 10 mm thick in CM (1:3) on other than fair face of brick work surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20mm cement screed base of CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spd and directed.

M&L for 25 mm thick chequered cement concrete tiles of approved size,set ,jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as per specification.

M&L 20 mm for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as spd and directed

Rounding to edges of stone slabs exposed edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M&L for Vitrified Ceramic light shade tiles (square/rectangular) 8 to 9mm thick polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over 15mm thick screed bed of cement mortar (1:6) complete all as speified and diirected. Note : Design, shade and pattern of fixing of tiles shall be as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed

M&L for refixing of old machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment complete all as specified and directed

Taking down chowkhat or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame) each complete all as specified and directed

Taking down chowkhat or frame with shutters exe 1.50 Sqm and not 4 sqm (without taking of shutter from frame) each complete all as specified and directed

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed

M&L for chowkhat 2nd class hard wood plain, solid, straight, chowkhats and and frames wrought , framed rebated on the solid rounded or chamfered, put together with gluepinned at joints complete all as specified and directed by Engr-In-Charge.

S&F 30 mm thick factory made Flush shutters ,solid core construction ,with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Beads in doors/windows, straight (any size) for glazed/wire mesh or gauzed joinery made of 1st class Hardwood, renewed, including mitres etc and removing old beads to Store complete all as specified. .

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including Aluminium snap beading for glazing/ paneling, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed

M&L for 4mm thick ACP board (Aluminium composite panel), exterior grade, (approved colour) fixed with aluminium tapperd clip to aluminium frame work complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F stainless steel Butt hinges100mm long medium weight ,cold rolled complete all as specified and directed

S&F 150 mm long Brass handles, cast type, polished bright fixed with screws complete all as specified and directed

S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed

Taking down Wall panelling and similar work complete all as specified and directed

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed

S&F Brass CP bracket fancy type suitable for fixing of 25 mm dia curtain rods complete all as specified and as directed.

S&F 25 mm dia Stainless steel curtain rod complete all as specified and as directed.

S&F door bottom sealing 1-1.5 m in length rubber fixed below aluminium or wooden door for snake guard complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 150 mm complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness complete all as specified and as directed.

M&L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to 18 Mtr height including all necessary scaffolding and safety measures complete all as specified and directed

M&L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as in ridges, roof covering/cladding to wall, corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to 18 Mtr height including all necessary scaffolding and safety measures complete all as specified and directed

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items complete all as specified and as directed.

M&L for PCC 1:2:4 Type B-0 25 mm thick (using 12.5 mm graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, including demolition of cement concrete (un-reinforced) roof surfaces complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of roof surfaces or concrete surface in CM (1:4) complete all as specified and as directed.

M&L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 Sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge (Notes :- (i). As per description of this item, minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii). Quoted Rate shall be deemed to be included for work in building/structure of any height complete all as specified.

S&F PVC SWR pipes 150 mm bore single socketed in any length with rubber ring joint fixed to wall with PVC clamps for rain water pipes including taking down old PVC/CI pipe complete all as specified and as directed. Make : Supreme/ Finolex.

Dismantling wooden boarding, any description, fixed in any position with nails complete all as specified and as directed.

M&L for Plywood 12 mm thick, Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and as directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with bore of pipe 15 mm dia complete all as specified and as directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with bore of pipe 20 mm dia complete all as specified and as directed.

Taking down steel tubing having bore of pipe 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F Vitreous china IWC Squatting pan,'orissa pan' pattern, size 580x440 mm white, with integral foot rests(excluding flushing cistern nd flush pipe) complete all as specified and as directed.

S&F vitreous china wash basin white, flat back, size 580x450 mm excluding taps, waste, chain and plug and including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe cutting for pinning in ends of brackets, complete all as specified and as directed.

S&F in repairs 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets complete all as specified and as directed.

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

Sheet glass 3.0 mm thick , ordinary quality and glazing in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Stop cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in 15 mm dia bore of pipewith wall flange complete all as specified and as directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in 15 mm dia bore of pipe complete all as specified and as directed.

S&F two way Bib Tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in 15 mm dia bore of pipe complete all as specified and as directed.

S&F Pillar taps,swan neck type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure swan neck (T/M) complete all as specified and as directed.

S&F Pillar taps, mixer for hot and cold water cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia bore of pipe complete all as specified and as directed.

Supply and applying Silicon sealant compound in required width of joints with a maximum depth of 50 mm of surface on top of roof sheets to prevent leakages complete all as specified and as directed.

S&F in repairs spindle or other faulty parts for 15mm bib taps/pillar taps/stop cock/angle cocks etc. to bring it in functional conditions complete all as directed by Engr-in-Charge

S&F in repairs to aluminium doors, windows, ventilators etc by replacing its faulty parts to bring it in functional conditions complete all as directed by Engr-in-Charge

S&F in repairs to steel windows & ventilators etc by replacing its faulty parts and missing items to bring it in functional conditions complete all as directed by Engr-in-Charge

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finishedcomplete all as specified and as directed.

S&F plain fibre glass sheet fixed to framed iron work or in claddings/similar works to bring it in functional conditions with aluminium strips all around with self drilling screws complete all as directed by Engr-in-Charge

Supply and applying white cement compound in required width of joints with a maximum depth of 75 mm of surface for filling joints, gaps, partitions etc along horizontal or vertical surfaces complete all as specified and as directed.

Welding in repairs exc 2.5cm but n exc 5cm in length with thickness of metal to be welded exc. 20mm but n.exc 25mm complete all as specified and as directed.

S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork complete all as specified and as directed.

S&F 125 mm Brass Chromium Plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed by Engr-in-Charge.

M&L for fixing PVC (SWR) pipes of 110 mm bore diameter single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F Urinal Spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and as directed.

S&F 15 mm bore angle valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanised wire staples, complete all as specified and as directed.

S&F health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook incl making connection and fixed in position complete all as specified and as directed.

S&F in tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and as directed.

S&F 2nd class hard wood small fittings such as door and window stops and cleats including all necessary articles exceeding 200 cu cm and n. exc. 500 cu. cm each complete all as specified and as directed.

E/M PORTION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and as directed.

M&L for light/fan/exhaust fan point wiring controlled by one way switch complete with 1.5 sq mm FRLSH, PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral),drawn into and including PVC casing- caping (double interlock type) of not less than 25mm width with accessories and fittings such as bends, elbows, tees, crosses, junction box etc, fixed on wall/ceiling with GI saddles, GI screws, rawl plugs etc. for the followingl point controlled by one switch including pressed steel terminal box powder coated of suitable size with 2.8 mm thick bakelite hylam sheet cover, ISI marked with CM/L no of approved make for housing/mounting switches, sockets & regulators etc. and drawing 1.5 sq. mm copper stranded conductor PVC insulated, unsheated cable as earth continuity conductor, connected to common earth and earth dolly , all as specified and directed by Engineer-in-Charge Note :-(i) Cost of PVC casing & capping, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface are deemed to be included in the quoted rate.

All as per item No 128.00 above but 5 Amp socket on same board with other switches complete all as specified and as directed.

All as per item No 128.00 above but 5 Amp socket on Independent board with other switches complete all as specified and as directed.

All as per item No 128.00 above but one bell point with other switches complete all as specified and as directed.

All as per Item No. 128.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 2.5 Sqmm for one socket point of 3 pin 5 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and as directed.

S&F socket outlet 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch duly marked complete all as specified and directed.

S&F socket combination outlet 2 in 1 multipurpose 5 pin , (6 Amps) flush type 230/240 Vcontrolled by one switch duly marked complete all as specified and directed.

S&F in switch 16 Amps, 230/240 V complete all as specified and as directed .(For Same Board only)

S&F socket outlet 2 in 1,3 pin , (6&16 Amps) flush type controlled by one switch complete all as specified and as directed.

S&F ceiling rose surface bakelite 45 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and as directed.

S&F Bell push, flush type, 5 amp duly marked complete all as specified.

S&F Bell, AC 230 Volts, single pole 230 volts complete all as specified and as directed.

S&F lamp holder, polycarbonatebody with back plate straight or angular suitable for batten fittings complete all as specified and as directed.

Taking down existing panel light fitting any type (600 mm x 600 mm) recess mounting/surface and S&F LED light fitting 36 watt recess mounting of size 600 mm x 600 mm , L, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 110 lumens per watt, isolated electronic LED driver (SMPS based constant current supply) with output short circuit protection, over voltage protection, surge voltage protection upto 2 KVs, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, ITHD below or less than 15%, CW available CCT of 5700K, power factor of minimum 0.95, CRCA powder coated white after phosphochromate treatment housing, life span of minimum 50000 working hours including making electric connection from source with PVC sheathed copper conductor wire of 1.5 Sqmm x 3 core complete all as specified and directed by EIC.

All as per BOQ Item No 143.00 here-in-before but of size 300 mm x 300 mm, 18watt complete all as specified and as directed.

S&F in repairs decorative wall light gold finish fixture with glass diffuser suitable for Lamp type 1 N x 9 watt lamp ,2 N x 7.5 watt LED filament lamp E-27 Base including fixing on wall with screw/plastic gitti etc, GOBLETO WL 1 LS E27 GLD home decorative light all as directed by Engr-in-Charge.

S&F in repairs decorative wall light, Stainless steel , rust free fixture with white glass diffuser suitable for Lamp type 1 N x 9 watt lamp ,2 N x 7.5 watt LED filament lamp E-27 Base including fixing on wall with screw/plastic gitti etc, FRORETTE WL 1 LS E27 SS home decorative light all as directed by Engr-in-Charge.

S&F LED light fitting 1x10W bulkhead luminaires Corvi Plus LED light driver holder connecting up with three core flexible copper conductor cable of suitable complete all as specified and as directed.

S&F in repairs LED 9/10 Watt tube light fitting mirror intregated type, including LED retrofit tube lamp 9/10 W , LED tube light nominal power 9/10 Watt, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, , lumen efficacy of minimum 110 lumens per watt, , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 2.5 KV, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 extruded aluminium LED battens life span of minimum 50000 working hours complete fitting including connecting with PVC insulated multistranded copper flexible cable 1.0 sqmm three core, and PVC round/ square box white colour x 2 Nos for mounting of fitting complete all as specified & directed

S&F in repairs LED 20 Watt tube light fitting intregated type, including LED retrofit tube lamp 20 W , LED tube light nominal power 20 Watt, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, , lumen efficacy of minimum 110 lumens per watt, , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 2.5 KV, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 life span of minimum 50000 working hours and LED batten with aluminium housing and polycarbonate diffuser complete fitting including connecting with PVC insulated multistranded copper flexible cable 1.0 sqmm three core, and PVC round/ square box white colour x 2 Nos for mounting of fitting complete all as specified & directed. . Note (i) Make of batten and LED tube lamp should be of same make.

Taking down fan,exhaust Pvc body and repair and replacement of unservicable broken body complete and fixing of connecting sealing cable and S&F in new Pvc body of suitable size 200/250 mm plastic body of existing exhaust fan including electrical connection all as directed by Engr-in-Charge

S&F in repairs LED security light 35 watt (Min) 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, Aluminum die cast housing High efficiency long life LED package in integral module with lumen efficacy of 110 lm/W (Min) and viewing angle of 45 degree to ensure better uniformity, electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test as per latest IS. operational voltage of 170 volts to 270 volts, frequency of 50 Hz, protection grade IP 66, IK-08 CRI greater than or equal to 70% , CW available CCT of 5700K/6500K, power factor of minimum 0.95 , life span of minimum 50000 working hours cincluding necessary electrical connections by PVC sheathed copper conductor wire of 3 core x 1.5 Sqmm and necessary fixing arrangement all as specified. Note : (i) The minimum requirement of lumen efficiency, lumen output and power consumption has been specified. However, as per availability, the bidders may opted higher specification with out any extra cost. The quoted rate is deem to be included for that and no extra payment will be made on this account. (ii) The fittings should be marked 'Date of installation" and "Date of Procurement" with marker pen

S&F in reairs sheet metal enclosure with 20 Amp MCB and two pin and earth plug and socket complete with one single pole MCB all as specified.

Supply and fixing for surface type sub main wiring with two run of 4.00 Sqmm single core PVC FRLS, PVC insulated unsheathed stranded copper conductor (Red/yellow/blue wires for phases and black wire for neutral) drawn into and including PVC casing- caping (double interlock type) of not less than 25mm width with accessories and fittings such as bends, elbows, tees, crosses, junction box etc, fixed on wall/ceiling with GI saddles, GI screws, rawl plugs etc. including one run of 4.00 Sqmm single core PVC FRLS, PVC insulated unsheathed stranded copper conductor as earth wire (green in colour) complete all as specified. Note : 2 runs of line conductor, one run of earth continuity conductor, one run of PVC casing caping shall be measured as unit length.

All as per Item No. 153.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 6.0 Sqmm including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 6.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed. Note: All wire connection with suitable sizw copper lugs.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed

S&F 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning

S&F in repairs MCB SP 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)

S&F in repairs MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)

S&F in repairs MCB SPN 63 Amps, 'C' series 16kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)

Taking down and S&F vertical 4 way TPN DB with MCCB incomer up to 250 Amp MCCB Incomer IP 43 glazed door including fixing connecting arrangment suitable for 3 pole and 4 pole MCCB Incommer all as directed by Engr-in-Charge

S&F in repair MCCB 4 pole, 3 phase, 415 volt of capacity 63 Amp, 16 KA complete with proper copper thimbles, copper reducer etc all as directed.

S&F in repair MCCB 4 pole, 3 phase, 415 volt of capacity 100 Amp, 16 KA complete with proper copper thimbles, copper reducer etc all as directed

Taking down and Repair/cheking and fixing only and connecting electric meters up to 25 Amp including cheking nutral phase ,earth wire etc all as directed by Engr-in-Charge.

Taking down and Repair/cheking and fixing only and connecting electric meters above 25 Amp including cheking nutral phase ,earth wire etc all as directed by Engr-in-Charge.

S&F Metal plug 20 Amp 3 pin for AC and geyser all as directed by Engr-in-Charge

S&F Metal Socket 20 Amp 3 pin for AC and geyser all as directed by Engr-in-Charge .

S&F in repair 2.5 MFD fan capacitor microfarad Brand MIA MILTON all as directed by Engr-in-Charge .

S&F in repair Socket with Mini MCB Modular Box With 25 Amp MCB For AC, Heater, Power machine 1 socket extension board all as directed by Engr-in-Charge.

S&F in repair bell, AC 230 Volts, single pole 230 volts all as specified and directed

S&F in repair switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

S&F in repair socket outlet 2 in 1 multipurpose 3 pin , (6 Amps ) flush type controlled by one switch duly marked complete all as specified and directed.

S&F in repairr switch socket Combination 6 A/16A,5 in 1 flush type with fuse & neon incator controlled by one switch two hole type complete all as specified and directed.

S&F in repair socket Combination 2 in 1,3 pin , (6 and16 Amps ) flush type universal controlled by one switch four hole type complete all as specified and directed.

S&F in repair modular switch 1 way 6A one module complete all as specified and directed.

S&F in repair Modular bell push 6A one module complete all as specified and directed.

S&F in repair modular Socket 6A 2/3 pin combined 2 module complete all as specified and directed.

S&F in repair modular Switch Socket Combination 16A, 6pin, 3 module complete all as specified and directed.

KAZI SAHABUL ALAM (BID ID -3160624)

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION (BID ID -3160695)

ANSH CONSTRUCTION (BID ID -3160983)