Liner to size 115 x 45 x 3.15 mm,

Special Eligibility Criteria

1. 1

   The item is reserved to procure only from the firm's who are approved / development source's of RDSO for RDSO DSO Item ID: 3100432 , Silico- Manganese & Manganese Steel Liners & Wear Plates for Bogie and Couplers PL No: 38101853 , Spec: 56-BD-07 with Amend.no.1 of Sep'10 & with Amend.no.2 of Sep'2016, 48_BD_2008_Amendment _1_2016, CONTR LCCF 20 C,WD-70-BD- 10_Rev_2, WD34 CASNUB 22HS MOD-I, IRS R65-78, WD-17 Casnub 22 HS Bogie Rev 03 with Amend 06, WD-40-LWLH25 Bogie K- Class -2015 rev .1 Amend.2 of Feb 2022, WD-39-CASNUB-22HS MOD-2 Bogie-2009_Amend.3 WD-21-ASNUB- 22NLB Bogie-Rev.2_Amend.6 ,Drw: WD- 13012-S-05-SH-2, WD-13012-S-05-SH- 1,CONTR-9404-S-8-ALT-12, WD-13012- S/04,Alt.-07,WD-97049-S/3,Alt.-10, WD- 92058-S4 Alt.12, CONTR-9404-S/5, WD- 17013-S-03, CONTR-9404-S/4, SK-69594 Alt 28, WD-89067-S/4, WD-22091-S/4 , STR: QMS-22-2009 (Rev. 0) , Images: (LINER.PDF, available on IREPS Vendor Directory (U-VAM). (Note : Please also refer the other conditions related with implementation and applicability of eligibility criteria that are mentioned in Para 1.2 of general conditions of tender in section-II of NWR tender condition (SBD)).

   Document optional
2. 2

   Firms who are participating as an authorized dealer of RDSO Source, are requested to indicate name and address of manufacturer works and submit the TENDER SPECIFIC AUTHORIZATION letter from their manufacturer on their letterhead along with the tender. Non- submission of valid OEM TENDER SPECIFIC AUTHORIZATION letter will make their offer invalid and offer will be summarily rejected.

   Document optional
3. 3

   Developmental vendors are only such vendors which are listed as developmental vendors available on IREPS Vendor Directory (U-VAM) of the item ID/sub item ID applicable to this tender WITHOUT ANY CONDITION (i.e. without any condition regarding prototype approval or field trials approval conditions/remarks). Note : Please also refer the other conditions related with implementation and applicability of eligibility criteria that are mentioned in Para 1.2 of general conditions of tender in section-II of NWR tender condition (SBD).

   Document optional
4. 4

   EMD condition: All bidder who are exempted to submit EMD as per Clause 3.1.1 of Section-I of NWR Tender document, are required to sign Bid Security Declaration as mentioned in clause 3.1.5. Submission of offer by such exempted bidders will be considered that they have signed the above bid security declaration. Bidders who are not exempted to submit EMD and bidders who are under disqualification for EMD exemption as on date of tender opening, are mandatorily required to submit EMD (online) as mentioned in Tender NIT. (Note: Please refer Para 4 in section-I of NWR tender condition (SBD) for applicability of MSE benefits).

   Document optional

Commercial-Compliance

1. 1

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

Other Conditions

1. 1

   INSPECTION CLAUSE : Inspection by CONSIGNEE.
2. 2

   SD Condition: Security deposit will be applicable as Clause 12 of Section-II of NWR tender conditions.

   Document optional
3. 3

   Micro and Small Enterprises firms In order to avail themselves of benefits and preferential treatments, the MSEs must be registered with any of the following: - (a) UDYAM (UDYAM Registration Certificate). (b) Udyog Aadhar Memorandum (Note :- Terminal date for consideration of this certificate was till 30.06.2022 or as extended by Ministry of Micro, Small & Medium Enterprises from time to time. Thus this certificate (Udyog Aadhar Memorandum) can only be considered if the above terminal date is further extended beyond 30.06.2022). MSEs registered with above agency/agencies must attach (in the template - "Attach Documents" on "Techno-Commercial Bid Details form", as scanned copy in PDF format) their current & valid registration certificate along with their offer. Other Conditions shall be as per Para 4 of Section-I of NWR tender condition document.

   Document optional
4. 4

   Tenderer should mention in their offer: - 1. Name of manufacture with complete address. 2. Place of inspection be indicated with complete address, option for inspections at godowns/outstation/multiple places be strictly avoided, and preferably be permitted only at manufacturers place.

   Document optional
5. 5

   Wherever the inspecting authority is specified in the tender documents, tenderers are advised to quote accordingly. Offer with any deviation from INSPECTION CLAUSE mentioned in tender will be SUMMARILY REJECTED.

1. 1

   INSPECTION CLAUSE mentioned in tender is responsive condition.