SITC of Street Light System of HAL Sunabeda with Led Light and hybrid Led Light System with Cabling

Supply & installation of 8 Mtr Long Hot Dip Galvanized Street Light Octagonal Pole with Foundation Type Base Plate & Foundation Bolts (Dimensions for pole as Top Diameter 70 mm, Bottom Diameter 155 mm, Section Length- 8000 mm,Thickness-3 mm, Foundation Type Base Plate (250X250X16mm), Foundation Bolts (M24 X 750 MM 4Nos). Poles shall be designed to withstand the maximum wind speed as per IS 875. All octagonal pole shafts shall be provided with the rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. This base plate shall be welded to the pole shaft at two locations i.e. from inside and outside. The welding shall be done as per qualified MMAW process approved by Third Party Inspection agency. The octagonal Poles shall have door of approximate 500 mm length at the elevation of 500 mm from the Base plate. Octagonal Poles HT Steel Conforming to grade S355JO. Base Plate Fe 410 conforming to IS 226 / IS 2062 Foundation Bolts EN.8 grade The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 70-80micron. The galvanizing Shall be done in single dipping.Test report of pole to be submitted before supply of items.Draft Pole design is attached.The bidder must be submitting Structural Calculation, TDS & GAD along with BID. All Test Cert & Type Test Report of Steel Plate & Accessories should be submit along with supply of materials. Warranty shall be 5 Years.

Construction of M-25 grade RCC foundation with nominal reinforcement for lighting poles, including provision of two numbers flexible PVC pipes of suitable diameter inserted within the RCC foundation for cable entry, complete with supply and fixing of anchor/tor rods, excavation in all kinds of soil, shuttering, concreting, backfilling, curing and all associated works, strictly as per approved drawings or as directed by the Engineer-in-Charge, complete in all respects.

Supply and installation of 150 W tear drop pendant pathway luminaires complete with spun aluminium housing and pressure die-cast heat sink, ring spun aluminium with black finish powder coating, clear polycarbonate cover, mains terminal 3-way 10 A suitable for terminating up to maximum 2.5 sq. mm incoming cable, cable entry through mounting pipe, stainless steel hardware, IP65 ingress protection, potted driver BIS approved (electrical safety as per IS 15885) with high surge protection including 4 kV internal and 10 kV external, electrical protections against high voltage and short circuit, rated voltage 240 V, frequency 50 Hz, operating voltage range 120–270 V, wattage 150 W @ 240 V, reverse polarity and open voltage protection,PF> 0.95,THD<10%, CRI>70%, Diffuser-Polycarbonate, IK protection-IK07 or better, Finish-Corrosion resistance Powder Coated and correlated color temperature (CCT) 3000 K ( WARM WHILTE),System Efficacy> 120 Lm/Watt, Luminous Flus>18000 Lumens complete in all respects as per specifications. LM-79 Test report from NABL accredited lab.LM-80 and TM-21 Report for LED Chip. IP test report.Warranty shall be 5 years .

Supply, Installation, testing and commissioning of 60W all-in-one Hybrid solar LED street lights manufactured from Pressures aluminium Sheet , suitable for outdoor pole mounting and fully self-contained with minimum IP65/IP66 weather-resistant protection. The luminaire shall deliver 60W LED output with minimum luminous efficacy of ≥160 lm/W, cool white colour temperature of 5000K–6500K, LED life ≥50,000 hours, and beam angle of 60° or as required, operating in dusk-to-dawn mode with motion sensor and/or Fixed dimming . LM-79, LM-80 +TM-21 ( LED Life), IP Test tested report to be attached. Operating Voltage Range 12.8 VDC . The battery shall be LiFePO₄ or lithium-ion type with minimum 78 Ah capacity, Panel Type : Mono-Crystalline and 150-190 Wp Max , Input Power 12.8VDC, Low Voltage cut off Nominal and +/- variations 11.4 VDC, Duty Cycle: 1st 2 hrs 100%, 2nd 1 hrs 60%, 3rd 1 hr 50%, 4th 8 hrs 40% or better or Min 2 nights Back Up. Note: If battery voltage reaches below 30% load will be on in differential dimming mode, or PIR Mode Indications,Battery Low Voltage, Red LED Glow, Battery Charging, Green LED Blink, Battery Full Charge Green LED Glow, Load Short Ckt, Green & Red LED Blink ,Protections: Battery deep discharge cut off Overcharge Reverse polarity Short circuit No Load/ Open Load Overload Dusk to Dawn SPV reverse polarity No flow of current through battery to panel.Adjustable Bracket: Tiltable Adapter Coupler 90°,100°,110°,120° Degree, Mechanical Dimensions to be mentioned in the bid and Housing Material: Die cast ALuminium, IP 65 or better , Dusk to Dawn Operation Provided Dimmability ,Dimmable / Non-Dimmable: Dimmable,Charge Controller Type : MPPT based intelligent controller(Solar+AC Hybrid function: Luminarie shall operate on solar Power primarily and Automated changeover to AC Supply in case of Low battery.Warranty shall be minimum Five (5) years on the product and five (5) years on the solar panel.

Supply & Fixing of Detachable decorative type Double arm with 1.5 mtr length, 3mm thickness as per drawing. The bracket will have HAL Logo welded at the top with sky blue painted as shown in the drawing.

Supply & Fixing of Detachable decorative type Three arm with 1.5 mtr length, 3mm thicness as per drawing. The bracket will have HAL Logo welded at the top with sky blue painted as shown in the drawing.

Supply & Fixing of Detachable decorative typeSingle arm with 1.5 mtr length, 3mm thicness as per drawing. The bracket will have HAL Logo welded at the top with sky blue painted as shown in the drawing.

Supply and Fixing 90W LED Street Light suitable for outdoor installation, conforming to BIS IS 16107 / IS 10322 (LED luminaires),IEC 60598 (Luminaires – general requirements) IEC 61000-3-2 (EMC, harmonic limits),IEC 61547 (EMC immunity requirements),Body Material Pressure die-cast aluminum,Surface Finish Powder-coated (RAL 7032 shade),Optics Injection-moulded, UV-stabilized, non-yellowing secondary lenses, Optics Type Peanut optics for wide distribution, Ingress Protection IP66 (Dust and water jet proof),Toughened Glass Cover, Weight Approx. 2.70 kg, Mounting Suitable for horizontal mounting on 42–60mm OD pipe,Fixing SS screws, corrosion-resistant fittings,The luminaire shall be robust, energy-efficient, weatherproof (IP66), and designed for long life with high lumen output, Electrical & Optical Specifications Rated Wattage : 90W System Lumen Output, 11,250 lumens Luminous Efficacy , ≥125 lm/W,Correlated Color Temperature:5700K (Cool White) Beam Angle: 60° (with peanut optics for optimal throw/spread),Color Rendering Index (CRI): ≥70,Total Harmonic Distortion (THD):<10%,Operating Voltage Range: 140V – 270V AC,Surge Protection: Minimum 4kV (internal) + 10kV (external SPD), Power Factor: ≥0.95,Driver Efficiency: ≥90%,Driver Type:Constant Current, silica gel potted,Over-voltage Protection:Shutdown at >300V with auto-recovery High Voltage Withstand:320V for 48 hrs; 440V for 8 hrs,LED Make:CREE / OSRAM / NICHIA / PHILIPS,LED Life (Average): ≥50,000 hours,Operating Temperature:10°C to +50°C, Bidder Should be submit Luminaire to be tested for: LM-79 and LM-80 (photometric and chip life),Thermal and surge performance,Over-voltage shut-down and auto-recovery protection.Warranty shall be 5 Years.

Excavation of cable trench and laying of 1.1 KV grade aluminium Armord cable along/across the road includes covering of cable trench with DWC pipe/HDPE. where ever required cable will pass through the road with Suitable Size Reinforced Spun concrete pipe/G. I Pipe. including supply of Al. Lugs, Pvc Tape & Completing of end termination. The price shall include all materials and labor required for doing the work. Contractor shall collect the cable from the store with contractor’s labor, tools & transportation etc. The contractor will have to make the surface as good as before after laying of cables. IR value of the cables is to be tested before and after laying.

Supply and installation of Bakelite sheet complete with one 16 A single pole MCB, MCB channel, and 16 sq. mm 100 A stud type connectors (4 numbers) mounted inside the pole at the door opening, suitable for safe and secure cable connection, complete in all respects as per specifications and site requirements.

Supply of 1.1 KV 4CX16 SQ MM Aluminum Armored cable for pole to pole underground cable laying including incoming from Feeder piller to pole.

Supply of 1.5 sq. mm × 3 core copper round flexible cable for connection from light fittings to internal junction box, complete with all required accessories, handling and installation as per site requirements, suitable for electrical installations, and complete in all respects as per specifications and directions of the Engineer-in-Charge.

Supply and installation of coil earthing up to 0.5 m from the street light foundation, including excavation, placement, backfilling and proper compaction, complete with supply of suitable size nuts, bolts and washers, and making proper and secure earth connection to the street light pole, ensuring effective earthing as per relevant standards, complete in all respects as per specifications and directions of the Engineer-in-Charge.

Installation of Feeder pillar box. The outdoor Feeder Pillar for pathway lighting should be erected on the aforesaid Cement Concrete foundational and grouted in the aforesaid CC foundation including Connection of Incoming , Outgoing Cable. Supply of Suitable Size double Compressor gland, Lugs, pvc tape etc under vendor scope.

Supply of 1.1 KV 4CX50 SQ MM Aluminum Armored cable for incoming power supply from nearest existing LT panel/ Substation LT panel to Feeder piller panel( 15 Nos) of Path way Light.

Supply of 7.5 KW Installation, commissioning and operation of an RF or GPRS/GSM based smart streetlight Gateway Controller system with integrated CCMC (Central Control & Monitoring Centre) software, capable of automatic scheduling of ON/OFF operations based on real-time clock and annual sunrise/sunset data, remote monitoring via 4G/2G communication, emergency wireless control, and self-protection against short circuit, over/under voltage, surge and theft. The system shall provide real-time and periodic data on voltage, current, power factor, active power, cumulative energy and lamp burning hours, generate configurable alerts (electrical faults, MCB trips, door open, relay failure, communication failure, theft, group lamp failure, etc.) forwarded to Android apps, and support AES-128 encrypted communication. Controllers shall be IP55/IP65 compliant, designed for ≥10-year life,rated at minimum twice the connected load, with external latching relay switching, auto MCB trip rectification, ISI marked Class 1.0 (or better) energy meter compliant to IS:13779, dual-band low-power modem, GPS, RF mesh networking, and wide operating temperature range. The CCMC shall be cloud-based, scalable (minimum 4000 devices), GIS-enabled, role-based secure, API-ready for ICCC integration, support analytics, reporting, asset and complaint management with citizen interface, mobile commissioning app, firmware upgrades, and demonstrate all specified features during technical evaluation. All hardware (including MCBs, load break switches, surge protection devices) shall comply with relevant IS/IEC standards, be NABL type-tested, and any deviation from specifications shall render the bid non-responsive. The above price including Rechage of 5 Year SIM & free spare metrials.

Supply, installation and Testing of chemical earthing arrangement for feeder pillar using 3 meter long, 50 mm diameter, 3 mm thick copper-coated steel earthing electrode, including excavation, backfilling, and all associated works. The earthing system shall comprise approved chemical earthing compound (bentonite/graphite or equivalent) to ensure low earth resistance, along with earth enhancement material, inspection chamber with cover, watering arrangement, GI strip or wire connections, clamps, nuts and bolts, and termination at equipment. The installation shall be carried out as per relevant IS standards and site requirements, ensuring proper continuity, mechanical strength, corrosion resistance, and achieving the specified earth resistance value, complete in all respects.

Dismantaling of Existing steel tubular poles/ street light standard / strut embedded in concrete cement foundation etc as required .the old removed defective materilas are to be handed over to the deparment.