GE 874/EWS-73/2022-23

Amount

B/R and E/M Portion

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness.

Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Dismantling of boarding, any description, fixed in any position with nails.

Dismantling of brick work or stone masonry built in cement mortar complete all as specified.

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering complete all as specified.

Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (w/o taking out shutter from the frame).

Taking down chowkhats or frame not exc 1.5 Sqm each ( without taking off shutters from the frame).

M& L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified.

M&L for cement concrete (1:2:4) type B2 using 40 mm graded aggregate as in walls any thickness size or shape complete all as specified.

M & L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter complete all as specified.

M & L for rendering 15mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing in CM 1:4 finished over and smooth without using extra cement complete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified.

All as per item above but plain sheet as in roof covering /cladding to wall fixed with tapping screws.

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified .

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F 5 mm thick tinted glass for door and windows portion, partitions automatic doors , window and similar work including cutting to shape, drilling holes required including necessary joining cleats, glazing clips, ruber neoprene packing complete all as specified and directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and directed.

S&F aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads.complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out,in soft/loose soil returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) in foundations filling and mass concrete.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 including one shop coat of zink chromate primer paint including preparation of surface.

M&L Hardcore of gauge exc. 63mm, n exc 100mm deposited, spread and levelled in layers n exc. 100mm thick, watered and rammed to a true surface of broken stone or boulders.

M& L for 100 mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified.

M& L for 75 mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified.

M& L for Pergo tile wooden mat finishes of size (1200x200x7-8 mm) laid over & including PVC foam 5mm thick with SR adhesive over & including 50 micron polythene sheet complete all as specified and directed.

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement screed 15mm thick in Cement Mortar (1:6) over Cement concrete type B-1, 1:2:4 (20mm graded aggregate complete all as specified and directed.

M & L for 2nd class soft wood "khatamband " (kashmiri Art) in ceiling / wall over 12mm thick BWR plywood and scantling framework including cornice and beading as required and applying three coats of polish after preparation of the surface complete all as specified and directed.

M & L for 2nd class softwood wall paneling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame work with secret nails as in wall panelling 15mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of surface complete all as specified. Note: frame work shall be measured & paid separately.

M &L for second class soft wood as in scantling clean sawn fixed in position.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood.

M & L for 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps.

S&F Eaves Boarding of 20mm thick of Softwood 2nd class with nails in any situation (except flooring and skirting) , Planed one side with butt jointscomplete all as specified and directed.

Plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails complete all as specified.

M& L for fillets exc 6 and not exc 13 sqcm of 2nd class softwood bullnosed, splayed,chamfered or rounded on one edge or face, clean sawn, secured with nails or brads complete all as specified.

M & L applying two coats of cement base paint including preparation of newly plastered surface of wall complete all as specified.

One coat of synthetic enamel paint over old steel or galvanised surface including preparation complete all as specified.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths complete all as specified.

M& for one coat of synthetic enamel paint over old wooden surfaces including preparation of surfaces over 10 Cm width or girth complete all as specified.

S& F aluminium Mortice lock, vertical type, size 65 mm.

S&F 100mm mild steel butt hinges medium weight fixed for fixing doors.

S&F 100 mm length Aluminium anodised barrel tower bolt, stove enameled black, with bright bolt and fixed.

75 mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, surfaces finished even and fair, complete all as specified and directed.

M & L for Walling of random rubble, uncoursed built in cement mortar 1:6 complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses for lime or sand stone, with depression on face from straight edge held against complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in coping incl necessary form work, weathiring, slightly rounded or chamfered angles and throating as directed.

Excavation over area n.exc 1.5m deep & getting out in any type of soil complete all as specified.

M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in fdn filling and mass concrete complete all as specified.

M & L for Walling of random rubble, brought upto courses well bonded, bedded and solidly hearted built in Cement mortar 1:4 complete all as specified.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

M & L precast cement concerete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in bond stone (for stone walling ) and set in cm 1:4 complete all as specified.

M & L hand packing of broken stone (any thickness) at back of wall etc and raising or lowering to required level complete all as specified.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil complete all as specified.

M & L flush pointing to random rubble stone masonry in cm 1:4, uncoursed or brought upto courses complete all as specified.

Removal of excavated materials not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc in soft/loose soil all as specified.

M&L Brick work with sub class 'B' brick straight or curved on plan etc 6 mean radius built in cement mortar 1:6 all as specified.

M&L for second class softwood clean swan, 35mm x 10mm laths (fixed straight or diagonally) in two way trallis work with 50mm spaces in the clear, including 75mm x 50 mm filled (notched to take ends of laths), preparation of surface with and applying 02 coat of varnish complete all as specified and as directed by Engr-In- Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Point wiring with 1.5 Sq mm multi standerd insulated copper conductor single core PVC insulated cable 1100 volt including casing and caping for one light point controlled by one switches including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover incl PVC insulated 1.5 Sqmm copper conductor as earth wire for one light controlled by one switch completed all as specified and directed.

All as per item above but for 3-pin socket out let 5 Amps on the same board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.

All as per item above but for 3-pin socket out let 5 Amps on independent board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.

All as per item above but for 3-pin socket out let 15 Amps on independent board with 2.5 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous continous1.5 Sqmm earth wire.

Supply and fixing in replacement of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for LED bulb 7 watt. Make : Havells/Anchor/Siska/Philips/Bajaj.

Supply and fixing in replacement of LED 7 Watt Bulb with B22 pin, of make Havells/ Syska/ Philips, suitable for fixing in holder as above.

S&F in replacement of decorative LED batten for surface and pendant applications. Anodized extruded aluminium housing, high transmisitivity diffuser, high lumen output of VIVA MINI LED Luminaires (4FT) of 20W connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make-Havells product code LUMILINEPLUSBS20WLED865SPCSS or equivalent of approved make as approved by Engr-in-Charge.

S&F in replacement of decorative / focus LED WARM WHITE designer light suitable for fix on wall with all fittings and accessories . Sample of the same as per direction of Engr-in-charge complete all as specified and directed by Engr-in-Charge. Make : Havells/ Phillips/ Wipro.

Supply and fix in replacement LED 10 to 20 Watt (as required at site) ,230v Indoor recess mounting down light circular/ square (as required at site) and flat type, Chip on Board, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified and directed. Make Havells, Philips, C&S.

Supply and fixing LED light fitting, 1x9 W bulk head luminaries, with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ. Make : Bajaj/Havells/Anchor/Philips.

S&F modular type Switch piano 6 Amps single pole one way. Make : Havells/Anchor/Philips.

S&F ceiling rose surface bakelite 65x50mm two to three terminals (ISI Marked). Make : Havells/Anchor/Philips.

S&F socket outlet 2-in-1, 3 pin, 6 Amps modular type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips.

S&F Switch socket combination 2-in-1 5 pin 6 Amps modular type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips.

S&F Switch socket combination 5 in 1, 5 and 15 Amp modular type universal controlled by by one switch (ISI Marked). Make : Havells/Anchor/Philips.

S&F rectangular boards/ blocks 30x25x4cm depth closed recessed, complete all as specified and as directed by Engr-in -charge.

S&F in replacement of sheet metal enclosure factory made for DBs Triple pole and neutral Single door 415 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells /LEGRAND/ SSK.

S&F in replacement of sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/LEGRAND/SSK.

S&F in replacement of sheet metal enclosure factory made for DBs Triple pole and neutral Single door 415 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/lEGRAND/SSK

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutal (SPN) 32-63 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips

S&F Single phase Voltage protection relay of trip setting 85 to 500 V AC complete with connecting testing and commissioning. All as specified and directed by Engr-in-Charge

Supply and fixing recess mounting Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling.36 watts suitable for Armstrong/Grid ceiling compatible for Analog / DALI Dimming.Fixture size in mm (LxWxH) 595x595x65.Make Havells Cat No of fitting- VENUSNEOHE2X2PLR18-42WLED830MOD and Cat Part No of Driver LEDDRIVER36V36WS or equailent of philips/ wipro.

Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m Make : Havells/ Bajaj/USHA

S&F house service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos900 bends. M.S. hook and stay or guy complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza

S&F in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 2 core complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza

M & L for sub main wiring with two single core 10 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white colour casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 6 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to galvanized iron wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15mm dia, GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work in any type of soil PCC 1:2:L4 as in earthing pit CI pit cover 5.5mm thick common salt charcoal all as specified.

S & F in replacement of Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe 20mm and fixed complete all as specified and directed by Engr-in-Charge

S & F in replacement of Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe 25mm and fixed complete all as specified and directed by Engr-in-Charge

S&F in replacement of GI water tubing 20mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of GI water tubing 25mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.

M/S MAHIR MUNEER

M/S MUNEER AHMAD WANI CONSTRUCTIONS

M/S AB AHAD RATHER

POPULARHARDWARESTORE

M/S MOHAMMAD JAMAL WANI

Bidder Name

M/S MOHAMMAD JAMAL WANI

M/S AB AHAD RATHER

G N T CONSTRUCTION CO

POPULARHARDWARESTORE

M/S MAHIR MUNEER

M/S MUNEER AHMAD WANI CONSTRUCTIONS