Renovation of Panchayat Union Middle School Renovation of Panchayat Union Middle School

Amount

Dismantling of One course of Pressed tile roof finish in cement morter (Sch No.38 C )

Supplying and fixing PUF Pannel roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Chipping of concrete & roughening the surface (Sch No.38A)

Granaolithic floor finish of 25 mm thick in PCC 1:2:4 using 10-12 mmHBGS Jelly inculding curing ete.complete.,

Painting two coats with Oil bound Distemper over old white wash surface , ceiling by through Scrapping of old plastered surface over priming coat etc

Plastic Emulsion with two coats including cost and conveyance of all materials and all labours charges etc.., complete

Painting two coat of Old iron works such as steel Doors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,ete.

Painting old wood works with two coats of synthetic enamal Painting two coats with approved black oxide for NEW Black board over the cement platered surface

Painting two coats with approved black oxide for old Black board over the cement platered surface

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in table PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil)(SD18)

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting (SD88)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")(SD106)

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing following 40 mm thickness of cuddapah slab for cupboard

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing following 40 mm thickness of cuddapah slab for cupboard

Provision for Name board (Logo)

Provision for GST @ 18%

K THAVASI