SPECIAL REPAIR TO BLDG NO T15B (OFFR MD ACCN) AT ENGR LINES AND PROVN OF 06 X 5000 LTR CAPACITY HDPE OHT INCLUDING STAGING ALONGWITH CONNECTED PIPE AT MORABADI POCKET OF RANCHI MIL STN UNDER GE RANCHI

Amount

Excavation in trenches n.exc 1.5 m in depth and n exc 1.5 m in width for foundation and getting out in hard/dense soil.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m the starting point complete.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete .

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (unreinforcement)

M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete.

M&L cement concrete type B-2, 1:2:4 (40 mm graded aggregate) 100 mm thick making fished surfaces even and fair( without using extra cement).

M&L PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregare as in foundation filling & mass concrete.

M&L Plain Cement Concrete Cast-In-Situ Type B1, 1:2:4 (using 20 mm graded aggregateas in lintels upto 1.5m clear span, cills, copings, water troughs and the like weathering, slightly rounded or chamfered angles and throatings, as directed.

Dimantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F 0.63 Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof covering fixed with coach screw as per manufacturers instrution complete.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete.

S&F prepainted galvalume aluminium zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall and ridge,fixed with self tapping srews complete.

Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as specified and directed.

M&L for half brick wall work with old size brick straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc .

M&L for rendering in cement mortar (1:6) , 15 mm thick on fair faces of brick work / Concrete /stone surfaces finished even & smooth without using extra cement .

All as per above Item No 20 but in cement mortar (1:4).

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc.

Dismantling of wall and ceiling board any thickness/description including cover fillet .

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre incl 2mm dia G.I. ( upto 1200 mm length ) adjusting level to Purlins/ Rafter complete.

M&L for 4mm thick non asbestos fibre cement building designer ceilling board/E-board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework with screws .

S&F for hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out GI flat 40X3mm size 60mm long and expension hold fastners 12.5mm dia 40mm long complete all as specified.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete .

All as per above item No 27 but exceeding 1.5 Sqm and not exc 4 Sqm each.

Providing & Fixing 100% solid WPC ( Wood Polymer Composite)- Door Frame 125 mm x 50mm Double Rebated Mullion Section made from Wood Polymer Composite ( Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade), Calcium Carbonate and nutral fibres ( wood Powder/Rice Husk/ Wheat Husk) and non toxic additives fabricated with meter Joints after applying PVC Solvent Cement & screwed with full body treated star headed screw holding capacity ( screw Withdral strength of ( Min 990 N), Minimum Compressive Strength of 58 N/Sqmm, Modulus of Elasticity 900 N/Sqmm and Resistance to spread of flame of class A category with property of being termite/ borer proof, Water/ Moisture Proof & fire Retardant & Fixed in position with SS Dash Fasteners/ Hold Fasts of required dia and length, all as per specifications draing as directed by Engineer- in- Charge.( Hold Fast or Dash Fasteners shall be paid separately) ( Make: RAJSHRI or equivalent)

Providing & Fixing 100% solid WPC ( Wood Polymer Composite)- Door Frame 100 mm x 50mm Single Rebated Mullion Section made from Wood Polymer Composite ( Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade), Calcium Carbonate and nutral fibres ( wood Powder/Rice Husk/ Wheat Husk) and non toxic additives fabricated with meter Joints after applying PVC Solvent Cement & screwed with full body treated star headed screw holding capacity ( screw Withdral strength of ( Min 990 N), Minimum Compressive Strength of 58 N/Sqmm, Modulus of Elasticity 900 N/Sqmm and Resistance to spread of flame of class A category with property of being termite/ borer proof, Water/ Moisture Proof & fire Retardant & Fixed in position with SS Dash Fasteners/ Hold Fasts of required dia and length, all as per specifications draing as directed by Engineer- in- Charge.( Hold Fast or Dash Fasteners shall be paid separately) ( Make: RAJSHRI or equivalent)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2020) .

S&F factory made solid PVC Moulded door shutter 30mm thick(stiles) with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing.

S&F factory made wire gauzed PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded both side prelam PVC Sheet and stile & rails feathered at edges having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap inside for top rail and bottom rail.panel will be wire gauze in lieu of prelam sheet ,the wire gauze shall be wrapped on an additional square 8mm M.S.Solid tube and this tube shall be welded to M.S Tube.the wire gauge shall be stretched to tighten firmly supplying and fixing in the frame at site as per specification and drawing.

Supply and fix for Three Track Sliding powder coated aluminium Window of sizes of Top/Side and Bottom track section of 91.80mm x 31.75mm x 1.20mm thick and Shutter section of sizes 39.40 mm x 17.70mm x 1.20mm thick including joining cleats, beading,locking arrangement, rubber gasket for fixing etc complete with 5.5 mm thick tinted glass & stailness steel wire cloth, 0.36 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete . (Make: Hindalco or equivalent).

Supply and fix for powder coated aluminium ventilator cross section 61.60x31.75x1.2mm consisting of two portions one portion shall have louvers with 4mm thick pin headed glass and aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm fixed with aluminium beads and securing on outer face of frame and second portion shall consist a opening for exaust fan complete. (Make: Hindalco or equivalent)

Dismantling wrought iron or mild steel work of any description not otherwise provided

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 .

S&F for straps, supports or suspenders, hooks for hanging fans, hold fast , clamps ,hooks,Wind ties for roof including securing bolt and similar small article etc. confirming to Fe 290 Gde E165 complete .

M&L for Plain Cement Concrete cast in situ Type B1 1:2:4 (20mm graded aggregate) using 20 mm graded aggregate as in hold fast .

Cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cm (1:3) or cement mortar 1:2:4 Type B-1 exc half brick but n.exc one brick thick

All as per item No 42 above but not exc half brick.

S&F 100 mm Butt hinges medium weight medium cold rolled mild steel

S&F 75 mm Butt hinges type C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete.

S&F of 150 mm size aluminium handles cast type anodised.

S&F of 75 mm size aluminium handles cast type anodised.

S&F Mild steel 300 mm long ordinary rat tial rod pattern springs including roller and roller plate complete all as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

M&L Stainless steel wire cloth for 0.36 mm nominal dia of wire & average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples etc

S&F floor door stopper 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in repair complete all as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling includiing cemenet mortar bedding, removing serviceable tiles to store and rubbish off the premises

M&L for 15mm thick in screed bed or bedding layer of Cement Mortar in 1:4 for laying floor finishes.

M&L for rendering 10mm thick in Cement Mortar 1:3 on fair faces of brickwork or concrete surfaces to receive wall finishes.

M&L light shade vitrified tiles 10 mm thick ( square / rectangular) area of each tiles not exceeding 0.36 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match .

All as per above item 56, but on vertical surface as dado/ skirting

M&L non-skid joint free ceramic coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match.

All as per above item 58, but on vertical surface as dado/ skirting

M&L glazed ceramic coloured tiles in vertical surface 350x250x7mm/450x350xx7mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces as in vertical surfaces.

Demolition of stone slabs and tiles of any description or thickness bedded and pionted in any mortar asin floors, aprons etc.

M&L 18-20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required .

M&L Chequered cement concrete tiles (30x30x25)mm thick, set, jointed and pointed in neat grey cement slurry in floors

M&L 25 mm thick Sand filling under floors or in foundation including watering and consolidation for laying interlocking tiles complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and no pigment in paths and hardstanding laid tightly over & including 25 mm thick dry sand cushion (compacted) and joint filled with dry sand(colour and pattern as approved by GE) complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site .

S & F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site .

S & F, 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Taking up or down 25mm dia steel tubing and connection including cleaning for re-fixing or removal from site .

S & F, 25mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I

S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 25 mm bore pipe

S&F, vitreous china pedestal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe & EWC seat cover etc complete and making good to floor complete.

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor.

S&F in repair 10 litres capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket .

S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing .

S&F brass chromium plated wall mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC.(make- Essco, cat no MQT-5178)

S&F brass chromium plated Basin mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC..(make- Essco, cat no SQT-516KN)

S & F in repair PVC cabinet mirror box type of size 355 x 455 mm all as directed by EIC (Make-prayag)

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste pipe.

S&F stainless steel plate rack 1mm thick of size 750X600x250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces all complete as specified and directed by Engr-In-Charge.

S&F 18 mm thick Rajshree Celuka ply or equivalent as approved of grade 1 quality with both side plain white or coloured fixed with stainless steel screwes, solvent cement /adhesive to fabricate kitchen cabinet sides , top and bottom, door, shelf inside the cabinet and drawer including ,drawer chanel, magnetic ballcatch & other all fittings complete all as per manufacturers instructions incl taking out old existing wooden cabinate.

S&F auto closing hinges 35mm of crank(KH-001) or 8 crank (KH-002) openable at 110 degree of make as approved.

S&F stainless steel handles of 100mm size.

S & F in repairs Aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges

S&F in repair chromium plated health faucet for EWC with 1 meter PVC tube and hook complete all as specified and directed.

S&F grating doom 100mm dia CP/PTMT min weight 25gm fixed in repair

S&F in repair 100 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

S&F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints, fixed to walls

S&F 110 mm bore PVC (SWR) pipes single socked in any length with rubber ring joints laid in trenches or in floors .

S&F, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in treches or in floors.

S&F PVC (SWR) bends any radius 110 mm dia

S&F PVC (SWR) 75 mm bore bends of any radius

S&F 110mm bore PVC (SWR) reducers

S&F 100mm bore PVC (SWR) vent cowl

S & F in repair, 15 mm bore fancy type bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

S & F 15 mm bore two way long body bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.( make- Esscco cat no TQT 512A)

S&F in repairs stop valve/angle cock fancy type of 15 mm dia cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle long shank and cup (concealed type) screwed both ends for iron pipes or for unions.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450mm.

S&F Chromium plated toilet paper holder with flap of standard size as approved by GE.

S&F in repairs Glass shelf assembly consisting of 5.5 mm thick sheet glass with CP brackets and CP frame Size 600mm long complete

S&F CP Towel ring, square type including CP screws complete. (Make : JAQUAR Code. ACN-1121BN or equivalent)

S&F CP Hand Shower with rubit cleaning system, size 100 x 55mm and 130mm long arm including 1.5m long flexible stainless steel hose complete complete (Make : CERA Cat no. CG-F7030101 Rain shower, Cat no. CG-104 shower arm)

S&F in repair brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union .

Demolition of cement concrete (reinforcement) any description and position not other wise specifically.

M & L for providing RCC (1:2:4) type B-1 ( concrete cast -in- situ) using 20 mm graded stone aggregate as in llintels upto 1.5m clear span, cills, steps, copings etc.

M & L for RCC( Nominal Mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall .

Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or slopeing) making fair finished surfaces complete.

S&F TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

S&F TMT bars 6mm to 8mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

M & L including preparation of new plastered wall surfaces and treating with two coat of oil bound distemper over a coat of primer over one coat of wall care putty .

Complete removal of existing treatment and applying two coat of oil bound distemper over a coat primer over one coat of wall care putty on old plastered wall surfaces.

M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness on new plastered wall surfaces.

M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness after complete removal of existing treatment on wall surfaces.

M&L, applying one coats of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described.

M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described.

Mild steel sheet eaves gutters, 150mm dia, thickness 1 mm galvanised class 3, half round with rounded edges

S&F Harrision rails , mild steel of anodised alloy with fixing brackets , stops, rollers etc.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose of soil.

M&L RCC 1 : 2 : 4 type B-1 using 20mm graded stone aggregate as in slab supported on walls, roofs, landing, balconies, canopies, deck slabs and in shelves and the like.

Use and waste form work to soffits of suspended slabs such as roof slabs. Floor slabs, landing and similar work not exceeding 200mm thick (Horizontal or slopping) finished surfaces.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM(1 : 6) finished fair and even.

M&L hardcore of guage exc 63mm but n. exc 100mm broken bricks deposited spread and leveled in layers n. exc 15 Cm thick water and rolled rammed to a true surfaces.

M & L preparing new plastered or unplastered surfaces of wall and applying three coat of white wash on wall complete all as specified and as directed

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for taking credit and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- (Rate of Modular cover plate is deemed to be included in the rate quoted)

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One bell point controlled by one, bell switch 5 Amps

Description all as per item No 5 here in before but using 2.5 sq mm single core copper conductor cable FRLSH of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm FRLSH copper conductor cable PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Description all as per item No. 5 here in before but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for power point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F Bell push modular 6 Amps single module complete all as specified.

S & F lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

M & L Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F MCB Single pole and neutral rated capacity 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps complete all as specified and as directed complete all as specified and as directed

Labour only for refixing the celing fan/ Exhaust fan obtained from above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

S & F Highly efficient LED Bulbs, 9/10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed

S & F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 9/10 watts complete all as specified and as directed. Make Havells , Philips, Bajaj.

S & F LED mirror light 9/10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Havells, Philips.

S & F Energy saving new generation 9/10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :-Havells Bajaj Philips

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Philips, Havells.

Supply and replacing 1100 volts grade heavy duty PVC insulated aluminium conductor, served with inner sheathing of PVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable of size 10 Sqmm multi -strand complete all as specified and directed.Make : Havells/Polycab

M& L for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised earth wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No 3 of MES Schdule Part-I connected to earthing point and testing on completion with and including 15mm bore light grade GI protection pipe (upto 7.5 meter beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C-1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8mm dia TMT bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore medium grade GI watering pipe common salt and charcoal filling, necessary excavation and earth work complete

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth in soft/ loose soil for laying of pipes and getting out, all as specified and as directed.

Supply & laying tubes,' medium grade', galvanized, with all fittings and fixtures; laid in trenches of 50 mm bore dia

Supply & laying tubes,' medium grade', galvanized, with all fittings and fixtures; laid in trenches of 40 mm bore dia

Supply & laying tubes,' medium grade', galvanized, with all fittings and fixtures; laid in trenches of 25 mm bore dia

Supply & laying tubes,' medium grade', galvanized, with all fittings and fixtures; laid in trenches of 20 mm bore dia

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for following bore dia. Make-Shakti/Scud, for 25 mm bore dia

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for following bore dia. Make-Shakti/Scud, for 20 mm bore dia

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for following bore dia. Make-Shakti/Scud, for 40 mm bore dia

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for following bore dia. Make-Shakti/Scud, for 50 mm bore dia

M & L road cutting /Hard Standing for laying pipeline complete all as specified.

Supply & fix 5000 Ltrs capacity antimicrobial antibacterial HDPE tank of 2000 mm dia, threaded lid, two layers with multi ribbed design.

M&L construction of Brick Masonry Valve Pit, one Brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40X5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement and 40 x 40 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Anti-corrosive Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work in Soft/Loose Soil and demolition of old unserviceable Valve Pit of following sizes complete all as specified and as directed. (a) 600 x 600 x 600 mm (Internal Dimension)

BHARATI ENTERPRISES

M/S Manoj Kumar Sinha

M/S JAI MATA DEE CONTRUCTION CO.

jai maavindwashni sales & supply

M/S DILIP KUMAR

Bihar traders