Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.7 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹19.1 L+₹1.1 L (6.41%)Rejected-Finance | L2 | Rejected-Finance Other lowest bidder | |
| 3 | L3₹21.1 L+₹3.2 L (17.9%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | L3 | Rejected-Finance Other lowest bidder | |
| 4 | L4₹21.4 L+₹3.5 L (19.8%)Rejected-Finance | L4 | Rejected-Finance Other lowest bidder | |
| 5 | L5₹21.9 L+₹4.0 L (22.5%)Rejected-Finance | L5 | Rejected-Finance Other lowest bidder |
| Sl No | Description | Qty | Unit | Keshav Brothers L7 | M/S GR construction compony L5 | VEDIT ENTERPRISES L1 | J.P. Enterprises L8 | M/S SURINDERAS CONSTRUCTION CO. L2 | QUALITY CONSTRUCTIONS CO L3 | friends associeates L10 | M/S HARINDER SINGH L6 | M/S Parshant Associates L9 | PUNEET CONSTRUCTIONS CO. L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour complete all as directed. | 5,000 | Sqm | 9 ₹45,000 | 5 ₹25,000 | 3 ₹15,000 Lowest | 10 ₹50,000 | 3 ₹15,000 Lowest | 8 ₹40,000 | 10 ₹50,000 | 12 ₹60,000 | 5 ₹25,000 | 5 ₹25,000 |
| 2.00 | M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bound distemper with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface as per manufacturer's instructions complete all as specified and directed. | 7,000 | Sqm | 15 ₹1,05,000 | 17 ₹1,19,000 | 11 ₹77,000 Lowest | 25 ₹1,75,000 | 20 ₹1,40,000 | 17 ₹1,19,000 | 30 ₹2,10,000 | 22 ₹1,54,000 | 20 ₹1,40,000 | 25 ₹1,75,000 |
| 3.00 | M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. | 2,500 | Sqm | 22 ₹55,000 | 23 ₹57,500 | 15 ₹37,500 Lowest | 35 ₹87,500 | 25 ₹62,500 | 31 ₹77,500 | 40 ₹1,00,000 | 33 ₹82,500 | 30 ₹75,000 | 30 ₹75,000 |
| 4.00 | M&L for preparation of old decorated surfaces of any description and applying two coats of cement base paint on external wall surface with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. | 8,000 | Sqm | 18 ₹1,44,000 | 17 ₹1,36,000 Lowest | 24 ₹1,92,000 | 20 ₹1,60,000 | 35 ₹2,80,000 | 21 ₹1,68,000 | 45 ₹3,60,000 | 33 ₹2,64,000 | 30 ₹2,40,000 | 18 ₹1,44,000 |
| 5.00 | M&L for preparation of old decorated previously treated surfaces of ceiling and applying one coat of distemper with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. | 3,000 | Sqm | 9 ₹27,000 | 13 ₹39,000 | 9 ₹27,000 | 25 ₹75,000 | 4 ₹12,000 Lowest | 12 ₹36,000 | 35 ₹1,05,000 | 33 ₹99,000 | 25 ₹75,000 | 18 ₹54,000 |
| 6.00 | M&L for preparation of old plastered surfaces of wall and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/Ltr and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot painted) with silicon additives @ 1.43 /10sqm over and including primimng coat of exterior primer applied @ 0.9/10sqm with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete compete all as specified and directed. | 2,500 | Sqm | 39 ₹97,500 | 35 ₹87,500 | 40 ₹1,00,000 | 50 ₹1,25,000 | 40 ₹1,00,000 | 37 ₹92,500 | 50 ₹1,25,000 | 33 ₹82,500 Lowest | 50 ₹1,25,000 | 45 ₹1,12,500 |
| 7.00 | M&L for preparation of new plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/Ltr and UV resistance as per IS 15489:2004, ALkali & fungal resistance, dirt resistance exterior paint of required shade(company depot painted) with silicon additives @ 1.43/10sqm over and including primimng coat of exterior primer applied @ 0.9/10sqm with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete compete all as specified and directed. | 100 | Sqm | 49 ₹4,900 | 45 ₹4,500 | 50 ₹5,000 | 100 ₹10,000 | 40 ₹4,000 | 39 ₹3,900 Lowest | 50 ₹5,000 | 120 ₹12,000 | 50 ₹5,000 | 75 ₹7,500 |
| 8.00 | M&L for one coat of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed. | 500 | Sqm | 34 ₹17,000 | 25 ₹12,500 | 12 ₹6,000 Lowest | 30 ₹15,000 | 25 ₹12,500 | 37 ₹18,500 | 30 ₹15,000 | 33 ₹16,500 | 30 ₹15,000 | 35 ₹17,500 |
| 9.00 | M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or girth complete all as specified and directed. | 800 | Sqm | 34 ₹27,200 | 25 ₹20,000 | 20 ₹16,000 Lowest | 30 ₹24,000 | 25 ₹20,000 | 42 ₹33,600 | 30 ₹24,000 | 33 ₹26,400 | 35 ₹28,000 | 35 ₹28,000 |
| 10.00 | M&L for rendering 15mm thick plaster on fair face of brick surface in cement mortar 1:6 mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equivalent.in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement including taking down of cement plaster complete all as specified and directed.
Note:- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately | 600 | Sqm | 109 ₹65,400 | 300 ₹1,80,000 | 75 ₹45,000 | 150 ₹90,000 | 40 ₹24,000 Lowest | 135 ₹81,000 | 125 ₹75,000 | 170 ₹1,02,000 | 190 ₹1,14,000 | 150 ₹90,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH DELHI CANTT 10
GE NORTH DELHI CANTT 10
PERIODICAL SERVICES TO OTM MD ACCN AT OD SHAKURBASTI IN AOR OF AGE BR II UNDER GE NORTH DELHI CANTT 10
2025_MES_709799_1
GE/North-23/2025-26
Open Tender
Civil Works
Item Rate
270 days
GE NORTH DELHI CANTT 10
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE NORTH DELHI CANTT 10
₹90,000
Yes
1 Oct 2025
23 May 2025
24 Jun 2025
23 May 2025
20 Jun 2025
6 Jun 2025
Amount
M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour complete all as directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bound distemper with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface as per manufacturer's instructions complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.
M&L for preparation of old decorated surfaces of any description and applying two coats of cement base paint on external wall surface with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.
M&L for preparation of old decorated previously treated surfaces of ceiling and applying one coat of distemper with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/Ltr and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot painted) with silicon additives @ 1.43 /10sqm over and including primimng coat of exterior primer applied @ 0.9/10sqm with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete compete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/Ltr and UV resistance as per IS 15489:2004, ALkali & fungal resistance, dirt resistance exterior paint of required shade(company depot painted) with silicon additives @ 1.43/10sqm over and including primimng coat of exterior primer applied @ 0.9/10sqm with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete compete all as specified and directed.
M&L for one coat of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed.
M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or girth complete all as specified and directed.
M&L for rendering 15mm thick plaster on fair face of brick surface in cement mortar 1:6 mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equivalent.in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement including taking down of cement plaster complete all as specified and directed. Note:- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately
M&L for rendering 15mm thick Plaster on fair face of brick surface in cement mortar 1:4 mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement including taking down of cement plaster complete all as specified and directed. Note:- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately
M&L for rendering 10mm thick in CM 1:3 on any faces of concrete surfaces finished fair and even without using extra cement in ceiling/ chajja including taking down cement plaster on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. complete as per specifications and directed
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plastered surface complete all as specified (Payment for providing grooves shall be made separately).
M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
Supply only PD proof 101 LW (+) of Dr Fixit or equivalent complete as per specifications and directed
Supply only super latex 302 of Dr fixit or equivalent complete as per specifications and directed
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30m the spray machine should be of reputed manufacturer's with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer's and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note: - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M/L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint all as specified and directed.
M&L for preparing newly plastered surfaces of ceilling and applying three coats of distemper with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in successive coats of paint complete all as specified and directed.
M&L non skid ceramic tiles colored tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM 1:6 including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L vitrified ceramic tiles 10mm thick square/rectangular light shade texture polished,area of each tiles not exceeding 0.36 sqm, in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM 1:6 including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L non skid ceramic tiles colored tiles 7mm to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM 1:6 including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L glazed ceramic coloured tiles size 450 x 300 x 7mm / 350 x 250 x 7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 10mm thick rendering in CM 1:4 including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
Supply and laying of CPVC pipes 20mm outer diameter SDR 11 & plain/brass CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
All as per the description of srl item No 24 above but with 25mm bore pipe
M&L for cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc and ctting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10cm girth complete all as specified and directed.
S&F in repairs curtain rods stainless steel powder coated polished 20mm dia including brackets, side stop complete all as specified and directed.
S&F in repairs fancy type chromium plated bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified
S&F in repairs stop cock/angle cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.
S&F in repairs 15mm dia central hole basin brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed .
S&F in repairs 15mm wall mixer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15mm Sink mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 20mm dia brass CP towel rail 600mm long complete all as specified and directed by Engr in Charge
S&F in repairs CP health faucet hygienic spray (2in 1 faucet with 1.0m long tube) complete all as specified.
S&F in repairs shower rose fancy type bass chromium plated 125mm heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed.
S&F in repairs vitreous china wash down water closet pan (padestal pattern) white colour closed pattern including soft closing back seat cover complete all as specified and directed.
S&F in repair PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete.
S&F in repairs water closet squatting pan "Orissa pattern" 580mm x 440mm, white with integral foot rests including fixing charges of flushing cistern, connection to trap, anti syphonage pipe and provn of lime concrete etc complete all as specified.
S&F in repairs vitreous china wash hand basin white flat back of size 550mm x 400mm including cutting for and pinning in ends of bracketscomplete all as directed and specified.
Supply only waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified and directed.
S&F in repairs 32mm dia PVC waste pipe for WHB with union complete all as specified and directed.
S&F in repairs 15mm bore PVC connection pipe of 450mm size with 2 Nos brass check nuts with washers complete all as specified and directed.
Taking down chowkhats or frames with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) and all as directed.
All as per the description of srl item No 43 above but exc 1.5 sqm but n.exc 4sqm each
Taking down shutters of any description exc 1sqm but not exc 2 sqm each and all as directed.
S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45mm x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete.all as specified and directed.
S&F 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc, all as specified and directed.
S&F 30mm in thickness flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.
M&L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer all as directed and specified.
S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.
S&F solid door frame 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F 100mm medium weight Mild steel butt hinges complete all as specified
S&F aluminium anodised barrel tower bolt 150mm long extruded section all as specified.
S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete all as specified and directed.
S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified.
Demolition of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed
Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq cm in section unframed work complete all as specified and directed
Dismantling of timber scantlings, of framed work, from any position & height 40 Sq.cm and over in section complete all as specified and directed.
Providing & fixing false ceiling at all heights with GRG (glass fibre with reinforced gypsum) false ceiling tiles fully perforated 12mm thick micro tegular edged or 10mm thick square edged of size 595mm x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, noncombustible as per BS tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15mm x 32mm of length 3000mm,cross-T of size 15mm x 32mm of length 1200mm and secondary intermediate cross-T of size 15mm x 32mm of length 600mm to form grid module of size 600mm x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85mm x 25mm x 2mm. Galvanised iron perimeter wall angle of size 24mm x 24mm x 0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge.
M&L for exposed metal frame ceiling with 6mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed by Engr-in-Charge. Note:- Frame work for ceiling shall be measured and paid separately
M&L for anodised aluminum snap grid frame work of size 605mm x 605mm for false ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long with complete hanging arrangement and making good the surface complete all as specified and directed
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
Demolition of brick work built in cement mortar in any position including all quions, arches and pillars etc, complete all as specified and directed.
M&L for brick work masonry with sub class 'B' brick straight orcurved on plan exceeding 6 mtr radius built in cement mortar 1:6 complete all as specified and directed.
M&L welding in repairs n. exc 6mm thick metal and n. exc 2.5 cm in length all as specified and directed..
M&L for rendering 15mm thick in CM 1:6 other than fair faces of brick/concrete surfaces finished fair and even without using extra cement complete all as specified and directed..
M/S SURINDERAS CONSTRUCTION CO. (BID ID -3322304)
QUALITY CONSTRUCTIONS CO (BID ID -3329936)
PUNEET CONSTRUCTIONS CO. (BID ID -3321156)
M/S GR construction compony (BID ID -3320356)
M/S HARINDER SINGH (BID ID -3330399)
Keshav Brothers (BID ID -3316637)
J.P. Enterprises (BID ID -3321942)
M/S Parshant Associates (BID ID -3322227)
friends associeates (BID ID -3330117)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .