REPAIR/RESURFACING OF ROAD ROAD FURNITURE AND ROAD MARKING AT BEG AND CENTER CERTAIN REPAIRS TO BLACK TOP ROAD AND HARDSTANDING AT TB 2 AND DUNKIRK LINE UNDER GE (CENTRAL) KIRKEE

Amount

M & L for repairs to pot holes any depth n,exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc, cutting around edges atleast 25mm in depth, making good by applying tack coat @ 5Kg per 10Sqm of paving bitumen (VG-30), putting in premix bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 Sqm of paving bitumen, blinded with o.09 cum of stone chippings 6.3mm size and again well rammed(including supply of premixed macadam binder and chippings) depth of pot holes exceeding 30mm complete all as specified and as directed.

Scarifying and picking gravelled macadam or bituminous macadam surfaces depth area not exceeding 400 Sqm and in exc 50mm and n exc 100mm in depth and removing the same to a distance n exc 50m and staking complete all as specified and as directed.

M&L for 7.5 CM thick (compacted thickness) WBM, with coarse aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) using granite, trap or basalt stone of grading spread and rolled and consolidated to gradient and camber required including rolling by using mechanical power road roller of 8 to 12 tonne cpacity complete all as specified.

All as per item No 3 above but except materials. Note: Serviceable material obtained from item No 1 shall be used under this item.

M &L Preparing unsurfaced WBM surface by brushing with wire brush for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc and for applying evenly a tack coat with bituminous emulsion RS-1 @ 10 kg per 10 Sqm with sprayer over existing surface etc complete all as specified and directed. Make : HINCOL or equivalent as approved by GE

M&L for premixed bituminous macadam with binder content @ (VG-30) 4% by weight of total mix (Job Mix) laid / rolled with 8 to 12 tonne power roller and compacted to required gradient and camber (consolidated thickness 75 mm or less as per site requirement of site ) complete all as specified and as directed. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site duly marked vehicle Number.

M & L for applying evenly a tack coat with bituminous emulsion RS-1 @ 3.00 kg per 10 Sqm with sprayer over bituminous macadam etc complete all as specified and directed. Make :- HINCOL or equivalent as approved by GE.

Preparation of existing black top surfaces by brushing with wire brushes and removing caked mud etc sweeping with mechanical broomer and finally fanning the cleaned surface with gunny bags to remove all loose dirt complete all as specified and directed by Engr-in-charge.

M&L for applying evenly a priming/tack coat bituminous emulsion RS-1 @ 5 kg per 10 Sqm with sprayer over bituminous macadam etc. all as specified and directed by Engr-in-charge.

M&L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 30mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete complete all as specified and directed. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (i) Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle Number.

S&F in repairs for solar road stud made out of aluminium housing and precast contruction solar powered by SIEMENS monocrystal solar panel 2V 120MA type of battery NI-CD 1.2 V 250 MAH and flash rate 2 Hz or 70Hz view distance over 300 mtr fotted with 2 HZ EL-805-3 pieces each side on 2 ends total 6 pieces LEDs flashing upto 12 hours of light at night and solar battery automatically charge in day/Sun light duly fixed with cement and hardner size 125 x125 x85mm in red/yellow colours complete all as specified and directed. Make :3M/TATA BP SOLAR/DARK EYE/Alcolite/Siddhi Vinayak as approved by GE

S&F in repairs for round solar delinator of red coloured made out of aluminium housing and 1100mm height precast construction solar powered by SIEMENS monocrystal solar panel 2V 120MA type of battery NI-CD 1.2 V 250 MAH and flash rate 2 Hz or 70Hz view distance over 300 mtr fotted with 2 HZ EL-805-LEDs flashing upto 12 hours of light at night and solar battery automatically charge in day/Sun light duly fixed with including excavation of post holes of size 250 x 250 x 500mm in soil and fixed in PCC 1:3:6 type C1 (using 20mm graded stone aggregate) complete all as specified and directed. Make :3M/TATA BP SOLAR/DARK EYE/Alcolite/Siddhi Vinayak as approved by GE

S&F in repairs Cat Eye ABS body with scratch and abrasion resistant micro prismatic polycarbonate and ultrasonically welded lens, temperature resistant body and lens, size 90mm x 110mm x 17mm (Ref/Yellow colours) complte all as directed of Make M/S Kranti Idustries, F-44 MIDC, Satpur, behind Sunil transport, Nashki/M/S Road safety Mark, 7, Sanjay Gandhi Nagar, Nehru road, near domestic Airport, behin Vile parle East Police Station, Vile Parle East, Mumbai/M/S MS Industries, G-20, MIDC Satpur, Nasik - 422005

M&L for preparation of New/existing black bituminous road/concrete surface and painting lines dashes (continuous/interrupted), arrows,letters etc on road 2.5 + 0.5mm thick and n.exc 10cm wide with one coat of hot applied white /golden/yellow auto retro-reflective thermoplastic road marking paint with reflectory glass beads on bituminous road all as specified in clause 803.40 of MOSRT&H specification over a coat of self primer using special applicator machine as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and as directed Make of paint : CMS Bombay / Shivalik Prime-Chandigarh / Ritco / Meerut / SN Industries-Delhi) and as approved by GE

Demolition of precast concrete block walling built in cement mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast articles as in kerb sonte all as specified and directed.

Demolition of cement conrete of any description and in any position not other specifically provided for complete all as specified and directed as in ground floors and pavings n.exc 15cm thickness (below or above ground level)

S&F informatory reflective Sign Board of size 1000x900mm each both side writing with stainless steel pipe frame on 2mm thick aluminium sheet size as required with hight intensity prismatic reflecting tape including 2 Nos of stainless steel post in each board having 76 mm dia/square post with 16 guage steel duly polished for best shine fitted round globe on top of height 2.1m each complete all as specified by EIC.

M&L for providing and laying at or near gound level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 incl making joints with or without groves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete all as specified and directed

M&L for PCC 1:4:8 type D-2,(using 40mm graded stone aggregate) 75mm thick as in sub base incl necessary use of form work complete all as specified and directed

M&L for 60mm thick machine pressed precast concrete interlocking paver block refelctive type coloured, with grey cement and pigment any shape and size conforming to IS-15658-2006 of M-35 grade with glossy finish colour shade in floor/pavement laid over and including 50mm thick crushed stone sand cushioning laid dry to the profile of old tiles complete all as speicified and directed.

Sunshine Ventures

vishalconstruction