Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.1 CrAccepted-AOC NO 6 7 TEACHER RAJAMANICKAM 3RD STREET CHENNAI BANGALORE NH SHENBAKKAM VELLORE 632 008 | VELLORE | TAMIL NADU | 632008 | ₹10.1 Cr | L1 | Accepted-AOC Lowest qualified bidder |
| 2 | L2₹12.6 CrRejected-Finance | ₹12.6 Cr | L2 | Rejected-Finance Second lowest qualified bidder |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not met out the BQR Conditions |
Tender Value
Refer Docs
EMD Value
₹26.6 L
Closing Date
6 Oct 2020, 2:00 pmClosed
The Chief Engineer/Civil DRIP
The Chief Engineer/Civil DRIP, TANGEDCO,3rd Floor, Eastern wing, NPKRR Maaligai, 144, Anna Salai, Chennai 600002.
Dam Rehabilitation and Improvement works
2020_EBMDB_179061_1
DRIP II/CE/C/DRIP/PD/SPMU/NCB No.04/2020-21
Open Tender
Civil Works - Others
540 days
Nilgiris
As per Specification
5 documents required · 5 mandatory
₹0
₹26.6 L
11 Mar 2021
11 Sept 2020
6 Oct 2020
11 Sept 2020
6 Oct 2020
12 Sept 2020
Amount
Earth work Excavation including removal and satisfactory disposal of all materials necessary for the construction of roadway and side drains of approach road to Dam, surge shaft, winch point, IB, in and around of glenmorgan camp area in accordance with the specifications and the lines, grades for spreading and making up the berms using side pit earth as per SS20B as directed by the Engineer in-charge.
Cutting and removal of vegetative debris on the approach to earthen bund and left flank approach to dam and disposed away from the site as per the directed by the Engineer in charge of the works as per technical specification including cost of labour, hire charges etc,. complete.
Advance BT patches upto 50mm thick using 45mm IRC HBG metal with 44Kg of Bitumen per one cubic metre which shall include repair of pot holes and patching of all types of bituminous mix either produeced at plant site or at site in pot holes or in patches after trimming the pot holes or depression to painting with tack coat and compacting the layer for the approach road to Dam, surge shaft, winch point, IB, in and around of glenmorgan camp area as directed by the Engineer in-charge using 80/100 Grade Bitumen.
Providing and applying of Tack coat using Bituminous Emulsion at the rate of 3Kg per 10Sqm over the BT surface for approach road to Dam, surge shaft, winch point, IB, in and around of glenmorgan camp area including clearing of road surface and spraying as per Clause 503 of MORT&H and directed by the Engineer.
Providing and laying 50mm consolidated thick bituminous macadam for approach road to Dam, surge shaft, winch point, IB, in and around of glenmorgan camp area using 0.20cum fo 26.50- 13.20mm, 0.43cum of13.20-2.36mm and 0.08cum of 2.36mm & below size IRC metal with 37 Kgs of VG30 / VG40 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50 mm with mechanical paver to the specified grades and cross sections and consolidated by8- 10 tonne Vibratory / Pneumatic Roller to the required density etc.,including labour forattending to paver to site etc.,including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all including fuel and all other incidental charges etc.,complete as per specification using CMP as per clause 504 of MORTH Rev-5
Providing and laying Bituminous Concrete to 30 mm thick for approach road to Dam, surge shaft, winch point, IB, in and around of glenmorgan camp area using 0.13 cum of 19.00- 9.50mm, 0.17cum of 9.50- 2.36 mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30 / VG40 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 4 0mm with mechanical paver to the specified grades and cross sections and consolidated by8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler ,tipper trucks, Paver Finisher / 9 m paver finisher, Vibratory / Pneumaticroller and all other tools and plant required, including fuel and all other incidenta lcharges etc.,complete as per specification using CMP as per clause 507 of MORTH Rev-5
Filling the red gravel for road side protection wall for approach road to Dam, surge shaft, winch point, IB, in and around of glenmorgan camp area including cost of material, transportation, consoliation, lead, lift, labour etc complete complying with standard specification and as directed by engineer incharge of work.
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shale, murram gravel, stoney earth & earth mixed with small size boulders and hard gravelly soil for foundation of kerb wall, Fencing post, approach road, protection wall, D/S side R/F in steps vertical support and depositing the earth in the places shown by the Engineer with initial lead of 10 M and initial lift of 2 m etc., complete, complying with standard specifications.
Providing and placing in position Plain Cement Concrete 1:3:6 using broken hard granite coarse aggregate size of 40mm and down graded for foundation of kerb wall, Fencing post, approach road, protection wall, D/S side R/F in steps vertical support including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete as per the direction of the Engineer and complying with standard specifications.
Providing and placing in position Plain Cement Concrete 1:2:4 using broken hard granite coarse aggregate size of 20mm and down graded of kerb wall, Fencing post, approach road, protection wall, D/S side R/F in steps vertical support including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete as per the direction of the Engineer and complying with standard specifications.
Cleaining of chocked culverts across the existing approach road to Dam main road to old and new gate shaft at different chainage including upstream side, barral portion, down stream side cleaning, disposal of debris away from site, all lead, lift etc complete complying with standard specifications
Supplying and lying of 900 mm dia RCC hume pipe for approach road pipe culvert including cost of all materials, labour, lead lift, etc., complete.
Supply and fixing alignment in position of main gate 2Nos with wicket gate 1no. For the Dam both enterance including cost of all materials lead,lift, aligning, labour charges etc., complete.
Providing chain link fencing (10 guage) of 50mmx50mm open including cost of all materials,lead, lfit,labour,etc., complete and as directed by the Engineer at site.
Plastering with cm 1:5, 20mm thick including cost of materials, labour, T & P, lead,lift, curing, etc complete.
Clearing heavy jungle on the both flanks of the Dam, inbetween krishna nair diversion weir to interconnecting channel near Glenmorgan old forebay and disposed away from site including cost of all materials, labour ,lead lift , etc complete.
Water washing with high pressure for removal of lime leaching and fungus formation in the D/S face of Dam under hanging condition as per specification including cost of all materials, labour charges, T&Ps required for the work scaffolding, etc., complete Wherever required as per instruction of Engineer in-charge at site.
Chipping the loose flush pointing and removing old cement motor jiont,removing the loose matreials , clearing the joints to a minimum depth of 50 mm, packing and pointing with cm 1:2 for bottom 25mm depth and cm 1:3 for balance 25 mm depth D/S face of dam including cost of all materials working platform rope , ladder,all labour , charges T& P labour charges for operating hanging platform curing etc., Complete.
Providing 'Poly Ironite Ceramic Cementitious (PICC)' or equivalent for masonry joint filling to a depth of 5 cm including preparing of 'T' joint of masonry by removing existing loose portion of stone masonry by racking out the masonry joints / epoxy treated joints to required depth, cleaning with special chemical 'Steripure 100' with pressure water jet for removing to algae fungi; applying bond coat before PICC application and top coat after finishing , complete on up stream face of dam as per specification including cost of all materials, machinery, labour, scaffolding, hire charges of cranes, insurance charges, transportation with all leads and lifts and any other incidental charges as directed by the Engineer in charge.
Pack grouting the holes by Poly Cementitious material as per requirement to reduce the porosity of masonry surface and to increase the strength of structure using grouting m/ c, mixer, etc and all relevant safety with all lead and lifts, etc. complete as per specification and as directed by Engineer in charge.
Cleaning the expansion joint with the Rabit Cleaning agent with the high water jet pump to remove the fungus,joint corners & mill scale formation, rough the expansion joint inside of three sides. Fix the flexable slilcone core nipple at the intervel of 0.50 M with necessary polyster morter and the damaged corners shall be treated with the same to fisnish the same with necessary polyester mortor and allow it to achieve the green strength..Injecting the intereact expandable grout with heigh pressure compressor jet unit then the grout comes into the next adjesant point interneal capplieries filling the same and erate the capplieries,And sealing the point with the eposy resin mortor.Filling the backer rod to adjust the horizontal level for the Hydrophilic gel and the thicknesss of 15 mm the top and bottom of the backer.Tooling the same to remove the capplieries.After filling the gel filling the polyurathan filllerto 15 mm to avoid the thermal longitudinal cracks near the joints.After the treatment to protect the treatments apply the polyelotromic coating of 2mm and apply the primer and fix the HIGH MOLICULAR HIGH DENSITY POLY ETHLINE of 4 mm and fix the copper golvanized sheet fix with the interact copper screws with the expandable slili jel and seal it with the sealling material on up stream face of dam as per specification including cost of all materials, machinery, labour, scaffolding, hire charges of cranes, insurance charges, transportation with all leads and lifts and any other incidental charges as directed by the Engineer in charge.
Drilling holes of 32mm dia in rock for providing 25mm dia grip rods for the ridge weir of the Stilling Basin including cost of drilling, labour, lead and lift etc, complete including cost of all materials, with all lead and lift etc., Complete.
Supplying and Providing 25mm dia RTS grip rods for the ridge weir of the Stilling Basin including cost of all materials, Cutting, bending and fixing in position and grouting with cement slurry with all lead and lift etc., Complete.
Providing and placing in position Reinforced Cement Concrete M20 grade using broken hard granite coarse aggregate size of 20mm and down graded for the ridge weir of the Stilling Basin including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete as per the direction of the Engineer and complying with standard specifications.
Supplying, fabricating and placing in position of MS/ RTS rods of required size for the the ridge weir of the Stilling Basin and precast slab works including cost of binding wire, steel rods, conveyance charges, cutting, bending, tying with all lead, lift and labour charges etc., complete, complying with standard specifications and as directed by the Engineer at site.
Reaming the existing vertical drainage shaft of 200mm dia to the entire depth by rotary drilling from top of dam to the drainage gallery level, inclusive of all machineries, equipments, consunables, other materials required for the work, labour charges for operation, cleaing the drilled holes, transport charges for machinery and shifting them to different location etc., complete as directed by the Engineer at site for Pykara Dam New Forebay Dam.
Reaming the existing foundation drainage shaft of 200mm dia to the entire depth by specilised drilling inside drainage gallery inclusive of all machineries, equipments, consunables, other materials required for the work, labour charges for operation, cleaing the drilled holes, transport charges for machinery and shifting them to different location etc., complete as directed by the Engineer at site for Pykara New Forebay Dam..
Removal of calcination from the gallery gutter portion in the floor including cost of labour, lead, lift, transporting the debris away from the site etc., complete.
Colour washing using exterior and interer emulsion two coats over one coat of Primer to the outer side of the Dam papapet spillway pier & building structrures including cost of all materials, labour. T & P etc complete.
Removal of water Hycynth and other floating vegitations which affects the trash rack flow in the upstrem side of the dam, interconnecting channel inbetween Glenmorgan old forebay to Pykara new forebay Dam, inbetween Pykara divesion weir (Krishna Nair diversion weir) to Downstream side of the Pykara Dam upto 6Km towards Pykara new forebay Dam (Glenmorgan) end along the flume in the entire area of the reservoir using boats including cost of all materials lead lift labour charges, Hire charges of boat and disposal 2 Km away from the site as directed by the engineer incharge of the site.
Providing temporary diversion bund using sand bag including cost of empty poly bags, charges for filling with sand, stitching, laying and formation of bund in U/S side of Krishna nair diversion weir (Pykara Diversion Weir) and interconnecting channel/ bund including clay packing in the middle, cost of all materials lead, lift etc., complete.
Supplying, fabrication and erection of 10mm thick chequrred plate with suitable stiffners, bracing, in position with horizontal, vertical supports for strengthing the existing krishna nair diversion weir walk way/platform and Hand rails with vertical support for steps on the Down stream side of the Right flank of Dam, Trash rack for inter connetcing channel, including cost of all materials lead, lift, transport, two coat painting over primar etc., complete.
Removal of silt and slush (made up red gravel) on the upstream side of the Pykara New Forebay Dam near vertical shaft No.12including cost of all materials lead, lift, transport away from the site etc., complete.
Filling the red gravel over road From Pykara old forebay interconnection bund to Pykara Diversion Weir (Krishna Nair weir) including cost of material, transportation, consoliation, lead, lift, labour etc complete complying with standard specification and as directed by engineer incharge of work.
Supplying and filling with gravel for forming the bund with necessary slope and watering, including cost of all material, transportation, consoliation with water & rolling by hand roller , lead, lift, labour etc complete complying with standard specification and as directed by engineer incharge of work and removal of the above same gravel, 2 Km away from the site after completion of the work for crossing low lying reaches..
Flush pointing in CM1:3 on the pitching stone joints in earthern bund upstream side and downstream side of the Dam paprapat RR wall on R/F including cost of all materials, leads, lifts, curing, etc., complete.
Supplying, fabrication and erection of Gauge plate made of structural steel frames of width 30cm, cutting, welding, fixing in position, etc., painting two coats of enamel over one coat of primer, fixing 30cm width of Procelin Gauge plate of required thickness in the frame, stickering for reading the levels, fixing on the dam as instructed by the Engineer at site, including cost of all materials, labour, lead, lift transportation, etc., complete.
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shale, murram gravel, stoney earth & earth mixed with small size boulders and hard gravelly soil for the police guard room, plinth protcetion fencing and depositing the earth in the places shown by the Engineer with initial lead of 10 M and initial lift of 2 m etc., complete, complying with standard specifications.
Providing and placing in position Plain Cement Concrete 1:3:6 using broken hard granite coarse aggregate size of 40mm and down graded for plinth protection fencing post RCC column footing including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete as per the direction of the Engineer and complying with standard specifications.
Providing and placing in position Plain Cement Concrete 1:2:4 using broken hard granite coarse aggregate size of 20mm and down graded plinth protection fencing post RCC column footing including placing in layers and vibrating, curing, finishing the surface with shuttering all leads and lifts, labour etc., complete as per the direction of the Engineer and complying with standard specifications.
Providing and placing in position Rein force Cement Concrete M20 grade using broken hard granite coarse aggregate size of 20mm and down graded to I.S Specified for Police guard room including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete but including cost of steel reinforcement as per the direction of the Engineer and complying with standard specifications.
Column Footings
Colums upto basement and roof
Beam at Ground Level
Plinth Beam alround
Lintel beam alround
Sill beam
Sun Shade
Roof Slab
Providing one course of Pressed tiles of size 23x23x2 cm as weathering course set in cm 1:3, 20mm thick mixed in crude oil 10% by weight and pointed with same at mortar over a bed of brick jelly concrete in lime 80mm thick for police guard room old forebay toilet including cost of all meterials leads,lifts,labour etc, complete complying with standard specification and as directed by engineer incharge of work.
Providing Random Rubble Masonry in CM 1:5 (one cement,five sand,by volume)using machin mix for new hard granite stones for police guard room old forebay toilet including bond stones wherever found necessary and curing cost and conveyance of all meterials labour etc.,compelet complying with standard specification and as directed by engineer incharge of work.
Supplying, fabricating and placing in position of RTS rods of required size for all reinforced cement concrete works police guard room old forebay toilet including cost of binding wire, steel rods, conveyance charges, cutting, bending, tying with all lead, lift and labour charges etc., complete, complying with standard specifications and as directed by the Engineer at site.
Flush pointing in CM 1:3 on the RR masonry joints police guard room old forebay toiletincluding cost of all materials with all leads, lifts, labour and curing etc., complete complying with standard specification and as directed by engineer incharge of work.
Refilling with excavated earth police guard room old forebay toilet including cost of all meterials leads,lifts,labour etc, complete complying with standard specification and as directed by engineer incharge of work.
Filling the foundation by River sand police guard room old forebay toilet including cost of material transportation, consoliation, lead, lift, labour etc complete complying with standard specification and as directed by engineer incharge of work.
Filling the foundation by gravel police guard room old forebay toilet including cost of material, transportation, consoliation, lead, lift, labour etc complete complying with standard specification and as directed by engineer incharge of work.
Providing Wooden board flooring using country wood scantlings and planks where ever nessery police guard room including cost of material lead ,lift ,labour,etc., complete complying with standard specification and as directed by engineer incharge of work.
Brick work in CM 1:5 using second class ground moulded chamber burnt Bricks of size 9"x4 3/8" x 2 3/4" for police guard room old forebay toilet including cost of material transportation,consoliation,lead,lift,labour etc complete complying with standard specification and as directed by engineer incharge of work.
Plastering with CM 1:5, 12mm thick police guard room old forebay toilet including cost of all materials, lead, lift,labour etc., complete complying with standard specification and as directed by engineer incharge of work.
Plastering with CM 1:3, 12mm thick for RCC surfaces police guard room old forebay toilet including cost of all materials, lead, lift,labour etc., complete complying with standard specification and as directed by engineer incharge of work.
Plastering with CM 1:3, 20mm thick for RCC surfaces police guard room old forebay toilet including cost of all materials, lead, lift,labour etc., complete complying with standard specification and as directed by engineer incharge of work.
Providing and placing with Non slippery Anti skid Tiles of size 305 mm x 305mm x 6mm over CM 1:3, 20mm thick and pointed with cement mortar police guard room old forebay toilet including cost of all materials,errection,testing,lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site.
Daddoing the Walls with Glazed tiles best and approved branded quality to set in cement mortar 1:3 police guard room old forebay toilet including cost of tiles and all leads, lifts, labour for finishing neatly as per standard specification - 10Sqm including cost of all materials,errection,testing,lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site.
Providing chain link fencing of 10Kg 50mmx50mm open police guard room including cost of all materials,lead, lfit,labour,etc., complete and as directed by the Engineer at site.
Supplying and fabrication and erection of structural steel of different size for placing of verical and strut post post for chain link fencing and other structural work police guard room including cost of binding wire and lead, lift etc., complete.
Supplying and fixing of main gate and wicket gateas per required size for Gauge room including cost of all materials,lead, lfit,labour,etc., complete and as directed by the Engineer at site.
White washing with two coats of white cement of approved quality for inner walls and celling police guard room old forebay toilet including cost of all materials, leads, lifts,labour etc., complete complying with standard specification and as directed by engineer incharge of work.
Inside colour washing with two coats of Acrylic Emulsion over a coat of primer after through scrapping and over two coat of water base putty police guard room old forebay toilet including cost of all materials, leads, lifts,labour etc., complete complying with standard specification and as directed by engineer incharge of work.
Colour washing using exterior and interior emulsion two coats over one coat of Primer to the outer side of the building structrures police guard room old forebay toilet including cost of all materials, labour. T & P etc complete complying with standard specification and as directed by engineer incharge of work.
Painting two coats of approved quality of enamel paint and colour over one coat of primer for new steel doors and windows,grills,etc., police guard room old forebay toilet including cost of all materials, lead, litfs,labour etc., complete as per specification and as directed by engineer incharge of work.
Supplying and fixing in position of steel door of size 900x2100mm with single leaf shutter partly of MS plain sheet of 18 gauge thick and partly with weld mesh of size 7.5x2.5cm 10 Gauge with 35x35x5mm ISA for outer frame and 25x25x5mm ISA for shutter frame and bracing with 20x5mm MS Flat and providing all accessories including cost of all materials, lead, litfs,labour etc., complete as per specification drawing and as directed by engineer incharge of work.
Supplying and fixing in position of steel window of size 900x1200mm with MS square bars fully covered with weld mesh grill of size 7.5x2.5cm 10 Gauge with 35x35x5mm ISA for outer frame and 25x25x5mm ISA for shutter frame and bracing with 20x5mm MS Flat with shutters of MS plain sheet of 18 gauge thick and providing all accessories including cost of all materials, lead, litfs,labour etc., complete as per specification drawing and as directed by engineer incharge of work.
Supplying and fixing in position of steel ventilator of size 1000x300mm with MS square bars fully covered with weld mesh grill of size 7.5x2.5cm 10 Gauge with 35x35x5mm ISA for outer frame and 25x25x5mm ISA for shutter frame and bracing with 20x5mm MS Flat with of glass 4mm thick leaves and providing all accessories including cost of all materials, lead, litfs,labour etc., complete as per specification drawing and as directed by engineer incharge of work.
Repair and Replacement of damage wooden windows, window cum ventilator, glass and reper for old police guard room including cost of all materials, labour, lead, lift etc. Complete
Suppling of Drinking water 7.5 HP Submergible pump with all accessories to draw water upto 50m head and 200 m lateral delivery and errection testing commisioning including cost of all materials, lead, litfs,labour etc., complete as per specification and as directed by engineer incharge of work.
Suppling of Drinking water 1 HP Monoblock pump with all accessories to draw water upto 3m head and errection testing commisioning including cost of all materials, lead, litfs,labour etc., complete as per specification and as directed by engineer incharge of work.
Supply and fixing of 1200 mm sweep Exhaust fan complete with stepped electronic 300 W regulator with 1 mtr down rod with fan clamp with side plates and cross arm size 450mm(Data arrived as per (SD 102) including cost of all materials, conveyance charges with all lead, lift and labour charges etc., complete, complying with standard specifications and as directed by the Engineer at site.
Providing and supplying of Room Warm Heater of approved quality (Bajaj or Equivalent) including cost of all materials, conveyance charges, with all lead, lift and labour charges etc., complete, complying with standard specifications and as directed by the Engineer at site.
Supplying and laying in position of GI pipe line 50 mm dia of medium class ( B class) of TATA make or equivalent conforming to IS 1239 as directed by the Engineer in charge for water supply arrangements outside the Building including cost of all materials, specials such as Tees, bends, Couplings, screws cutting , threading, joining, specials, TW plugs, packing and wrapping the pipe laid underground with hessian cloth and tarring and fixing the pipe above ground to walls with galvanized iron clips lead, lift etc., complete - 30M complying with standard specification and as directed by engineer incharge of work.
Supply and fixing of 6Kg/cm2 PVC pipes of 50mm dia including cost of all materials, lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site
Supply and fixing of 10Kg/cm2 PVC pipes of 20mm dia including cost of all materials, lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site
Supply and fixing of 4Kg/cm2 PVC pipes of 110mm dia including cost of all materials, lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site
Supply and fixing of chromium coated Bib cock of 20mm dia of approved quality including cost of all materials, lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site.
Supplying and fixing in position of Indian type water closet with foot rest attached and approved quality of size 45 cm including cost of all materials, errection, testing, lead, lift, labour for cutting and fixing etc., complete and as directed by the engineer at site.
Supplying and fixing of PVC(sintex) water tank of 1000 lit capacity aproved make and quality as per the specification including cost of all materials,errection,testing,lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site.
Supply and fitting of 40 mm down graded metal for dispesion Trench including cost of all materials,errection,testing,lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site.
Supplying and providing Belgium mirror of approved quality including cost of all material s,errection,testing,lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site.
Supplying of providing aof 25mm gun metal gate valve (hevey duty) including cost of all material s,errection,testing,lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site.
Supplying and fixing in position Wash Basin colour with pedestal of size 550 x 400 mm of approval quality and make (parryware or equivalent ) with C.P piller tap,(Metro) C.P.waste coupling ,PVC waste pipe ,angle cock,nylon connection hose and brass nipple,fixing the wash basin in the wall using brackets,given nessary water connection including cost of all material s,errection,testing,lead,lift,labour for cutting and fixing etc., complete and as directed by the engineer at site.
Colour washing using exterior and interer emulsion two coats over one coat of Primer to the outer side of the Police guard room and Gauge room building structrures including cost of all materials, labour. T & P etc complete.
White washing with two coats of white cement of approved quality for inner walls and celling Police guard room and Gauge room including cost of all materials, leads, lifts, etc., complete.
Painting with two coats of approved enamel paint for steel work over one coat of primer Dam parapet handrails including cost of all materials leads, lifts, etc., complete.
Supplying and fixing in position of double leaf steel door with ventilator of size1.05x2.45 with 35x35x5 mm ISA for outer frame and 25 x 25 x 5 mm ISA angle for shutter frame covered with MS sheet 18 gauge and braced with 20 x 5 mm flat as per specification including cost of all materials, necessary fittings, aldrop tower bolt , handle,lead, lift etc complete.
Supplying and fixing in position of steel window with iron bars covered with weld-mesh grill of size 0.9 x 2.35m with ventilator 35 x 35 x 5 mm I S Angle for outer frame and 25 x 25 x 5 mm angle for shutter frame as per specification and drawings including cost of all materials, fittings, such as hook, hinges, tower bolt, locking arrangements etc with all lead,lift etc complete.
Providing and placing with non slippery ceromic tiles of size 305mm x 305mm x6mm over cm 1:3, 20mm thick and pointed with cm including cost of all materials lead, lifts etc., complete.
Dadooing walls with glazed tiles of size 150mm x 150mm x 6mm in cm 1:2, 10mm thick and pointing with cement using 0.40kg/m3 including cost of all materials, leads, lifts, etc., complete.
Providing one course of pressed tiles of size 23x23x2cm as weathering course set in cm 1:3, 20mm thick mixed in crude oil 10% by weight and pointed with same at mortar over a bed of brick jelly concrete in lime 80mm thick including cost of all materials leads, lifts, etc., complete.
Providing and placing in position Reinforced Cement Concrete M20 grade using broken hard granite coarse aggregate size of 20mm and down graded including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete as per the direction of the Engineer and complying with standard specifications.
Supplying, fabricating and placing in position of RTS rods of required size for all reinforced cement concrete works including cost of binding wire, steel rods, conveyance charges, cutting, bending, tying with all lead, lift and labour charges etc., complete, complying with standard specifications and as directed by the Engineer at site.
Dismantling the existing doors including removal of frame,hinges and fastenings including cost of labour, lead, lift, transporting the debris away from the site etc., complete.
Dismantling the existing damaged pressed tiles, weathering course including cost of labour, lead, lift, transporting the debris away from the site etc., complete.
Wiring with 2 x 1.50 sq.mm. (22/0.3) PVC insulated cu unsheathed cu. conduit of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113 mm TW switch box for 5 A pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point as approved by the Engineer in charge including cost of all materials leads, lifts, etc., complete.
Supply and wiring with 2 x 4 sq.mm (56 / 0.3) PVC insulated SC. Unsheathed Cu. conductor cable of 1100 V grade in suitable pipe on wall and ceiling with PVC accessories with 150 mm x 100mm x 63mm TW switch box for 15A 3 pin non inter locking CS plug etc of reputed make with ISI standard with painting of suitable colour with connection of 14 SWG TC wire for open PVC Power plug point to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete.
Supply, erection, testing and commissioning of single box type 4' 40 W flu. fitting complete with Electronic choke of Phillips/Crompton make with ISI standard and condenser with TW round blocks on wall or ceiling with flu. tube with PVC unsheathed copper leads from terminals to the fitting to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete..
Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conduit cables of 1100 V grade in suitable PVC rigid pipe in wall and ceiling with PVC accessories and with TW switches and 5 A FT switches painting of sutable colours with continuous earth wire connection of 14 SWG TC wire for open PVC light / fan point (for electronic regulator)as approved by the Engineer in charge including cost of all materials leads, lifts, etc., complete.
Supply and fixing of 4 way single pole MCB sheet enclosure distribution board 1 No 40 amps DP isolator as incoming and 10Amps 1 No. 32 Amps SPN MCB out going with earth connection any ME MCB DB and CBs should be with ISI mark)
Earthing as per TNEB standard with an earth electrode of class B GI Pipe dia not less than 32mm dia, 2.1 mtrs length complete with necessary masonary work including cost of materials, labour, lead,lift,etc., complete…
Supply and fixing of Water Tight bluk head fitting with guard Philips / Bajaj / Crompton / K.lite) suitable for with 18 Watts CFL light including cost of materials, labour, lead,lift,etc., complete.(SD 80)
Supply and fixing of angle holder, 18 Watts CFL bulb with fancy glass shade including cost of materials, labour, lead,lift,etc., complete..
Supply and fixing of TNEB meter board with 0 - 32 Amps single phase energy meter suitable for 32 Amps single phase service connection with 32 Amps Fuse Unit (500 V)32 Amps neutral link and earth link (1" x 1/8" copper flat)on teak wood plank of size 375mmx300mmx19mm with supporting TW reepers of 1" thickon either side with painting with suitable bolt & nuts for fixing the TW plank on wall with earth connection with 7/20 PVC insulated copper wire from EB meter to fuse unit and fixing of energy meter including the cost of materials, labour, lead,lift,etc.,complete.
Supply and run of 2 of 6 sq.mm (56/0.3) PVC insulated multi sranded SC unsheathed cu.conductor of 1100 V grade on 25mm dia GI pipe (class B) suitably bend at both ends with necessary angle iron up upright and end supports for mains including the cost of materials, labour, lead,lift,etc.,complete.
Supply and fixing of 1000 watts automatic electric water heater with copper container with glass wool / puf insulation with MS powder coated shell suitable for 35 litres capacity, 230 volts, 1000 watts (Venus / Racold make) including the cost of materials, labour, lead, lift, etc., complete..
Supply, erection, testing, and commissioning of 415 V, 200 Amps TPN metal clad switch with rewirable fuse unit of reputed make with ISI standard at power room with necessary supporting arrangements to the satisfaction of the engineer at site including cost of materials, labour, lead lift etc complete.
Supply, erection, testing, and commissioning of 415 V, 200 Amps TPN metal clad switch with rewirable fuse unit erected in a outdoor metal box of adequate size of reputed make with ISI standard of adequate size with necessary supporting arrangements to the satisfaction of the engineer at site including cost of materials, labour, lead lift etc complete.
Supply, erection, testing, and commissioning of 415 V, 200 Amps 4 pole LT off load changeover switch of reputed make with ISI standard at dam top with supporting arrangements to the satisfaction of the engineer at site including cost of materials, labour, lead, lift etc complete.
Supply, erection, testing, and commissioning of LT Supply distribution panel for lighting with 63 Amps, TPN MCB – 1 No as incoming and 415V, 32 Amps, TPN MCB – 2 Nos, 32 Amps, SPN MCB – 5 nos as out going feeders with Over voltage/Under voltage protective device protector relay with over current protection of reputed make with ISI standard erected in a metal cabinet suitable for outdoor use as per ISI standard and internal wiring with adequate bus bar arrangement etc to the satisfaction of the engineer at site including cost of materials, labour, lead lift etc complete.
Supply, erection, testing and commissioning of gate motor control panel at dam top for 15 / 16 HP motor rating with 415 V 63 Amps TPN MCCB as incoming control, contactors of make L&T/ Siemens/ C&S/ABB or any reputed make of adequate rating / capacity with ISI standard, over load relays with adequate rating, UP/STOP/DOWN control, ammeter, voltmeter, indication lamps, provision for connecting 3 no limits switches each for both controls and with adequate capacity terminal blocks etc to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift etc complete and less the cost of retrived materials...
Dismantling, cleaning and refixing the corroded wiring terminal connections, contactors, over load relays and inner area of the existing gate motor control panel for 3 HP motor rating, attending the minor defects, replacement of failed indication lamps and minor spares, painting the panel with suitable colour enamel paint etc to the satisfaction of the engineer at site including cost of materials, labour, lead lift etc complete.
Supply, erection, testing and commissioning of limit switch of 415 V, 3 Amps rating with adequate number of contacts, outdoor type of reputed make with ISI standard at dam top with necessary supporting arrangements to the satisfaction of the Engineer at site including cost of materials, labour, lead, lift, etc., complete and less the cost of retrived materials.
Supply, laying, testing and commissioning of new 3 1/2 core x 25 sq.mm, 1100 V, PVC insulated, armoured, multi stranded, LTUG copper cable of reputed make with ISI standard including cost of cable, 65 mm, UPVC pipe of finolex or equivalent make, UPVC fittings, 8 SWG GI earth wire and laying the cable in open / consealed wiring as required at dam top to the satisfaction of the Engineer at site including cost of materials, labour, lead, lift, etc., complete and less the cost of retrived materials.
Supply, laying, testing and commissioning of new 4 core x 10 sq.mm, 1100 V, PVC insulated, armoured LTUG copper cable of reputed make with ISI standard with 8SWG GI earth wire including cost of cable, 65 mm dia UPVC pipe finolex make or equivalent , UPVC bend and chipping the concret for adequate depth and width and filling the portion with concret after laying the cable to the satisfaction of the engineer at site including cost of materials, labour, lead lift etc complete.
Supply, laying, testing and commissioning of new 4 core x 6 sq.mm, 1100 V, PVC insulated, armoured, multi stranded, LTUG copper cable of reputed make with ISI standard , 8 SWG GI earth wire, 40 mm class 3 (6 kg/sq.mm) UPVC pipe of finolex or equivalent make with ISI, UPVC fittings, 8 SWG GI wire and laying the cable in open / consealed wiring as required at dam top to the satisfaction of the Engineer at site including cost of materials, labour, lead, lift, etc., complete and less the cost of retrived materials.
Supply, laying, testing and commissioning of new 4 core x 4 sq.mm, 1100 V, PVC insulated, armoured LTUG copper cable of reputed make with ISI standard with 8 SWG GI earth wire including cost of cable,earth wire, 50 mm dia PVC pipe finolex make or equivalent , PVC bend and chipping the concret for adequate depth width and filling the portion with concret after laying the cable in consealed / open wiring at dam top to the satisfaction of the engineer at site including cost of materials, labour, lead lift etc complete and less the cost of retrived materials..
Supply, laying, testing and commissioning of new 4 core x 2.5 sq.mm, 1100 V, PVC insulated, armoured, multi stranded, LTUG copper cable of reputed make with ISI standard, 14 SWG GI earth wire, 32 mm class 3 (6/10 kg/sq.mm) UPVC pipe of finolex or equivalent make with ISI, UPVC fittings, laying the cable in open / consealed wiring as required at dam top to the satisfaction of the Engineer at site including cost of materials, labour, lead, lift, etc., complete and less the cost of retrived materials.
Supply and laying of new single core x 25 sq.mm, 1100 V , PVC insulated multistranded copper cable of reputed make with ISI standard by clamping / consealed at the power room to the satisfaction of the engineer at site including cost of materials, labour, lead lift etc complete and less the cost of retrived materials.
Supply and laying of new 25 x 6 mm GI flat for earthing by clamping on the wall or floor as per ISI standard to the satisfaction of the Engineer at site including cost of materials, labour, lead, lift etc., complete.
Supply, erection, testing and commissioning of 62.5 KVA, 415 V, 3 phase, silent operating, out door type diesel generator set with AMF control panel, battery and battery charger of Kirlosker / Cummins or any reputed make with ISI standard at the power room and handing over the released DG set to TANGEDCO to the satisfaction of the Engineer at site including cost of materials, labour, lead, lift, etc., complete.
Supply, erection, testing and commissioning of new 48 watts, 230 V, LED street light outdoor fitting of Phillips / Crompton / Havells or equivalent make with ISI standard, 7' street light pole fabricated from 3" MS class B pipe for bottom 2/3 length and 2' MS class B pipe for top 1/3 length and welded with 300x300x6 mm MS base plate with four nos hole to suit 16 mm bolt, rib, supporting pipe 0.3 mtr length, outdoor terminal box of size 250x200x150 mm made of 16 SWG CRCA sheet with powder coated siemens gray painting with terminal blocks of adequate capacity and adequate gland holes at bottom , connecting the street light fitting to the terminal box with 3c x 2.5 sqmm flexible copper cable , earthing of the street light pole and coping concreting of the pole at the dam top to the satisfaction of Engineer at site including the cost of materials, labour, lead, lift etc complete and less the cost of retrived materials.
Supply,erection,testing and commissioning of new 230 Volts, 30 Watts LED flood light water tight fitting (IP 65) of Philips,Hawels,crompton Greaves reputed make with ISI standard with necessary clamping arrangements on wall or ceiling with PVC unsheathed copper leads from weather proof IP65 terminal box to the fitting and all accesseries to the satisfaction of Engineer at site including the cost of materials, labour, lead,lift etc., complete.
Supply, erection, testing and commissioing of new 48 watts, 230 V, LED street light outdoor fitting of Phillips / Crompton / Havells or equivalent make with ISI standard, supporting pipe , clamp for fixing the fitting with the existing pole for dam area lighting to the satisfaction of Engineer at site including the cost of materials, labour, lead,lift etc complete.
Supply, erection and testing of new single rod maintenance free earthing electrode of ¾'', 10' length copper bonded steel rod, earth pit treatment by Ground enhancement material (GEM), terminal connection made by CADWELD PLUS or equivalent Exothermic method, interconnecting the earth pits by 8 mm dia copper bonded steel rod etc. confirming to respective IEC standard by execavation of earth pit, earth pit treatment, necessary masonary work with man hole cover, measuring the earth resistance, painting the earth pit cover with double coat green enamel paint, numbering, writing the measured earth resistance on the cover etc. near the power room to the satisfaction of Engineer at site including the cost of materials, labour, lead,lift etc., complete.
Overhauling, testing and commissioning of existing 3 HP induction motor used in the gate hoisting mechanism at dam top as per ISI standard including the charges for dismantling, cleaning, improving the IR value, varnishing, inspection and greasing of bearing, provision of new terminal box, assembling, erection, painting with suitable colour enamel paint, testing and commissioning of the motor,etc., to the satisfaction of Engineer at site including the cost of materials, labour, lead,lift, etc., complete.
Overhauling, testing and commissioning of existing 4/5 HP induction motor used in the gate hoisting mechanism as per ISI standard including the charges for dismantling, cleaning, improving the IR value, varnishing, inspection and greasing of bearing, assembling, erection, painting with suitable colour enamel paint, testing and commissioning of the motor,etc., to the satisfaction of Engineer at site including the cost of materials, labour, lead,lift etc complete.
Overhauling, testing and commissioning of existing 15/16 HP induction motor used in the gate hoisting mechanism at dam top as per ISI standard including the charges for dismantling, cleaning, improving the IR value, varnishing, inspection and greasing of bearing, provision of new terminal box, assembling, erection, painting with suitable colour enamel paint, testing and commissioning of the motor,etc., to the satisfaction of Engineer at site including the cost of materials, labour, lead,lift, etc., complete.
Overhauling, testing and commissioning of existing brake assembly used in the gate hoisting mechanism as per ISI standard, provision of new brake solenoid assembly for the existing brake assembly, replacement of wornout parts if any, inspection and greasing of moving parts, painting of brake with good quality enamel paint etc.to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift etc., complete.
Supply and fixing of new brass cable gland and copper socket for 3 1/2 x 25 sqmm LTUG cable of reputed make with ISI standard and termination of the electrical connections and gland earth connection to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete.
Supply and fixing of new brass cable gland and copper socket for 4x 10 sqmm LTUG cable of reputed make with ISI standard and termination of the electrical connections and gland earth connection to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete.
Supply and fixing of new brass cable gland and copper socket for 4 core x 6 sq.mm LTUG cable of reputed make with ISI standard and termination of the electrical connections and gland earth connection to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete.
Supply and fixing of new cable gland and copper socket for 4 core x 4 sq.mm LTUG cable of reputed make with ISI standard and termination of the electrical connections and gland earth connection to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete
Supply and fixing of new brass cable gland and copper socket for 4 x 2.5 sqmm LTUG cable of reputed make with ISI standard and termination of the electrical connections and gland earth connection to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete.
Supply and fixing of new copper socket for 1 core X 25 sqmm, unarmoured copper cable of reputed make with ISI standard and termination of the electrical connections to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete.
Supply,erection, testing and commissioning of warning system on the dam top to fore-warn the down stream inhabitants before release of high discharge by using new 5 Kms range,horizontal, double mounted, 3 HP, 3 phase, 415 Volts electric siren and outdoor starter panel of reputed make with ISI standard and adequate rating with supporting and protection arrangements to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete.
Supply, erection, testing and commissioning of Controlled streamer emission based Advanced Lightning Protection System 3000 INTCPT MK IV SS , CVM ( Collection Voulume Method) Air Terminal made of non-corroding stainless steel with a curved conductive surface of minimum thickness for air terminations as defined in IEC61024 / UL 96 / IEEE 998 standards, suitable mast of 5 meter length, 40 mm dia made of Aluminium, fixing accessories for fixing the Air terminal, Electro Mechanical Lightning Event Counter to register every strike between 2000A to 100kA for a 8/20 micro second peak current, Maintenance Free radial Earthing system with 4 nos copper bonded steel earth electrodes with Nickel bonding of size 5/8 Inch x 5 feet length with UL certification (UL 467) having minimum molecular bonding of 250 microns, environmental safe ground enhancement material ( GEM ) shall be applied as per requirement around the earth electrodes to reduce soil resistivity, interconnecting the earth pits by 8 mm dia copper bonded steel rod as per requirement, terminal connection made by CADWELD PLUS or equivalent Exothermic method, test Link box for Maintenance purpose to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete.
Supply of single core, 70 sq.mm insulated FRLS flexible copper cable of reputed make with ISI standard and fixing accessories to the satisfaction of the Engineer at site including the cost of materials, labour, lead, lift, etc., complete.
Supply and fixing of new suitable size & 'L' type rubber seal with good quality rubber and adequte hardness for 2sides of spillway gate of size 12.2mtr x 7.6mtr using new SS cover plates,bolt and nuts washers,etc., complete after removing the old damaged rubber seals,seal cover plates,bolt and nuts,etc., complete using gas cutting machineries and special tools & tackles without damaging the parent body of the gate and throughly cleaning the surface of the seating area as per the instruction of Engineer at site and also arresting the gate leakge to the permisible limit including the cost of reduction of retrieved materials which are taken by the contractor,cost of materials ,dismantling charges,labour charges, lead,lift,etc.,complete.
Supply and fixing of new suitable size flat type rubber seal with good quality rubber and adequte hardness for bottom of the spillway gate 12.2mtr x 7.6mtr using new SS cover plates,bolt and nuts, washers,etc., complete after removing the old damaged rubber seals,seal cover plates,bolt and nuts,etc., complete using gas cutting machineries and special tools & tackles without damaging the parent body of the gate and throughly cleaning the surface of the seating area as per the instruction of Engineer at site and also arresting the gate leakge to the permisible limit including the cost of reduction of retrieved materials which are taken by the contractor,cost of materials ,dismantling charges,labour charges, lead,lift,etc.,complete.
Supply and fixing of new suitable size single stem musical note rubber seal with good quality rubber and adequte hardness for 2sides and top of PUSHEP intake gate size 2.5mtr x 2.5mtr and scour vent gate size 0.92mtr x 1.52mtr of both regular and emergency gates using new SS cover plates,bolts and nuts, washers,etc., complete after removing the old damaged rubber seals,seal cover plates,bolt and nuts,etc., complete using gas cutting machineries and special tools & tackles without damaging the parent body of the gate and throughly cleaning the surface of the seating area as per the instruction of Engineer at site and also arresting the gate leakge to the permisible limit including the cost of reduction of retrieved materials which are taken by the contractor,cost of materials ,dismantling charges,labour charges, lead,lift,etc.,complete.
Supply and fixing of new suitable size flat rubber seal with good quality rubber and adequte hardness for bottom of PUSHEP intake gate size 2.5mtr x 2.5mtr and scour vent gate 0.92mtrx1.52mtr of both regular and emergency gates using new SS cover plates,bolts and nuts, washers,etc., complete after removing the old damaged rubber seals,seal cover plates,bolts and nuts,etc., complete using gas cutting machineries and special tools & tackles without damaging the parent body of the gate and throughly cleaning the surface of the seating area as per the instruction of Engineer at site and also arresting the gate leakge to the permisible limit including the cost of reduction of retrieved materials which are taken by the contractor,cost of materials, dismantling charges,labour charges, lead,lift,etc.,complete.
Overhauling and reassembling of guide rollers,filler valves, pulleys etc.,of PUSHEP Intake gate of size 2.5mtrx2.5mtr, scour vent gate size 0.92mtrx1.52mtr of both regular and emergency and tunnel gate for singara PH complete using whatever suitable size/type spares required such as bearings, ecentric pins,seals,aluminium bronze bushes, spacer plates,gaskets,springs, etc., with good quality as per IS for ensuring the trouble free operation of the above said parts as per the instruction of Engineer at site including the cost of reduction of retrieved materials which are taken by the contractor,cost of materials, dismantling charges,labour charges, lead,lift,etc.,complete.
Overhauling and reassembling of guide rollers,pulleys, etc.,of spillway gate size 12.2mtrx7.6mtr complete using whatever suitable size/type spares are required such as bearings ecentric pins, seals, aluminium bronze bushes, spacer plates, gaskets, springs,etc.,with good quality as per IS for ensuring the trouble free operation of the above said parts as per the instruction of Engineer at site including the cost ofreduction of retrieved materials which are taken by the contractor, cost of materials, dismantling charges, labour charges, lead, lift, etc.,complete.
Over hauling and reassembling of the gear box, gear coupling, pinions, manual operating mechanisms,rope drums,feed back mechanism,etc., complete for spillway gates,PUSHEP Intake gates, scour vent gates of both regular and emergency using whatever suitable size spares are required if any parts got damged in it and then bring the entire operating assembly into service for trouble free operation as per the instruction of the Engineer at site, including cost of dismantling,all materials,reconditioning charges , labour charges, leads, lifts, etc., complete.
Cleaning the steel wire rope manually, and applying cardium compound (Servo coat 120/140/ 190)of steel wire rope for PUSHEP Intake gate, of both regular and emergency and cleaning the floor area free from spilled rope grease after completion of re-greasing as per the instruction of the Engineer at site including cost of materials, labourcharges, lead, lift, etc.,compelete.
Supply and fixing of new suitable size wire rope with good quality for the spillway gate and scouvent gate using new fixing clamp,bolt & nuts washer,etc and also applying rope compound as per IS complete after removing the old damaged wire rope ,clamb,bolt & nuts,etc., complete using gas cutting machineries and special tools & tackles without damaging the parent body of the rope drums & gate and thoroughly cleaning the surface of the fixing area as per the instruction of Engineer at site including the cost of deduction of retrieved materials which are taken away by the contractor,all materials,dismantling charges,labour charges, lead, lift, etc, complete.
Supply, fabrication and erection of new vertical column support & cross bracing for PUSHEP Intake gate's hoisting platform for strengthening with ISMB300x140 as vertical support,using ISA75x75x6 as cross bracing and MS plate 20 mm thick for top support,replacement of scour vent gate guide channels and provision of step ladder for hoisting structures using suitable size steel structures including cost of dismantling,all machineries,materials,fabrication charges, labour charges, transporting charges, loading and unloading charges,etc., complete.
Replacement of the corroded chequrred plate by using new chequarred plate 8 mm thick and using ISMC150x75 for additional bottom support for hoisting deck bridge of spillway gate including reduction of realisation of scrap which is to be taken away by the contractor as per the instruction of Engineer at site including cost of dismantling the existing chequarred plate,all labour charges,transporting charges,loading and unloading charges etc.,complete .
Replacing the damaged spillway gate gear box,motor,brake assembly gear coupling,pinions,gear train assembly, bearings, plumber blocks,manual operating mechanism etc.,complete after manually lifting the spillway gate 12.2mtrx7.6mtr & counter weight to its dogging position by using whatever suitable size spares are required and then bring the entire operating assembly into service for trouble free operation as per the instruction of the Engineer at site, including cost of dismantling, reconditioning, alinging, all materials,scaffolding charges,labour charges, leads, lifts, etc., complete.
Painting with two coats of epoxy coal tar with priming one coat of red oxide Zinc Phosphate of approved colour and quality after cleaning,scraping,and removing the old paint in the existing surface of the PUSHEP Intake gate and scourvent gate of both regular and emergency as per the instruction of the Engineer at site, including cost of materials, lead, lift etc., complete.
Painting with two coats of epoxy coal tar with priming one coat of red oxide Zinc Phosphate of approved colour and quality after cleaning,scraping and removing the old paint in the existing surface of the spill way gates as per the instruction of the Engineer at site, including cost of materials, lead, lift etc., complete.
Painting with two coats of Zing rich Aluminum paint over one coat red oxide Zinc Phosphate paint for the surface of hoisting structures of PUSHEP Intake gate,scourvent gate of both regular & emergency,spill way gates area and tunnel gate for Sigara PH completely after thoroughly cleaning it as per the instuction of Engineer at site including cost of materials,lead,lift etc.,complete.
Painting with two coats of Zing rich Aluminum paint over one coat red oxide Zinc Phosphate paint for the surface of hoisting mechanism covers and dam top hand rails of PUSHEP Intake gate,scourvent gate of both regular and emergency,spill way gate and tunnel gate for Sigara PH completely after throughly cleaning it as per the instuction of Engineer at site including cost of materials,lead,lift etc.,complete.
Painting with two coats of epoxy zinc rich Aluminium paint over one coat of red oxide Zinc Phosphate paint for the newly erected chequarred plate 8 mm thick for hoisting deck bridge of spillway gate PUSHEP Intake gate's hoisting platform strengthening structures and staircase as per the instruction of Engineer at site including cost of all labour charges, transporting charges, loading and unloading charges etc., complete
Providing cementitious 1:3 mortar for filling of big cavity to the masonry joint upto 30 cm depth complete as per specification including coat of all materials, machinery, labour, scaffolding, hire charges of cranes, insurance charges transportation with all leads and lifts as directed by the Engineer in charge.
"GST for bidders within TamilNadu Note : Bidders within Tamil Nadu shall enter values separately for SGST and CGST and shall enter the value as "Zero" for IGST.
GST for bidders outside TamilNadu Note: Bidders outside Tamil Nadu shall enter value only for IGST and shall enter the value as "Zero" for SGST and CGST .
K.RAJAGOPALAN AND CO
Bidder Name
J K CONSTRUCTIONS
K.RAJAGOPALAN AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid