HUBBALLI DIVISION: Miscellaneous annual Maintenance activities for quatres and service buildings and area covered under SSE/Works/DWR Jurisdiction(SW-12).

Item Breakup - B-SCH-B

"Maintenance , repair / replacement in Per each 624.00 respect of 1) Masonry works - brick work, Team/day concreting,grouting, plastering, pointing, flooring / dado work, Open drainage works, roof leakages etc. 2) Carpentry works - Wood work, doors & windows,cup boards, frames, shutters fittings & fastenings,rafters, reapers, wooden furnitures, roof sheeting etc.3) Plumbing works- Day to day maintenance and repair works in Plumbing related. By supplying multi skilled team. Each team of Multi skilled man comprises of 2 members of mason or carpenter or plumber or combination as per requirement with all Contractors tools, transportation, lead & lift,equipment's & scaffolding arrangements, safety equipment, maintenance of tools & other equipments etc. Material required for repair / replacement / other petty repair works will be supplied by the Railway at free of cost at work spot and as decided by Engineer in charge. The rate is for any one team of multi skilled members. Note: 1) Each member of team should report to SSE/Works - In charge on or before 9hrs on required working days as required by Railways 2) The Contractor should attend the maintenance, repair / replacement works with number of labour specified - one team of 2 nos for each category of work as directed by the Engineer in charge 3) A day to day register shall be maintained for this purpose and the same should be produced to the SSE/Works - In charge when ever required and produced the same for making payment 4) If any complaint / deficiency noticed in the working of the labourer, they should replaced with new person as per the direction of the Engineer in charge,. 5 ) Two times maintenance cost (per team / per day) will be imposed as penalty for the deficiency in working by the contractor's labour 6) The contractor should comply with existing laws and acts of Govt. of India and State Govt. Law and acts in engagement and working with labour 7) Mobile phone communication facility should be provided by the contractor to the each team for communication with departmental officials for instructions." Total 1378971.36

Item Breakup - D-SCH-D

of 88 mm, weighing not less than 190 gms. HUBLI DIVISION-ENGG/SOUTH WESTERN RLY 17.78 Providing and fixing white vitreous china Each 5 14999.15 74995.75 extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous 84 china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 17.81 Providing and fixing floor mounted, white Each 2 18212.9 36425.8 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual 85 flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 86 18.7.1 15 mm nominal dia Pipes Metre 200 286.8 57360 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 87 18.8.1 15 mm nominal dia Pipes Metre 150 497.8 74670 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded 18.9 fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 88 18.9.3 25 mm nominal dia Pipes Metre 300 355.4 106620 89 18.9.6 50 mm nominal dia Pipes Metre 250 794.25 198562.5 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting 18.10 and making good the walls etc. ( Internal work - Exposed on wall ) 90 18.10.6 50 mm dia nominal bore Metre 150 1048.35 157252.5 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc. External work HUBLI DIVISION-ENGG/SOUTH WESTERN RLY 91 18.12.6 50 mm dia nominal bore Metre 200 762.15 152430 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 92 18.15.1 15 mm nominal bore Each 50 353.25 17662.5 Providing and fixing brass stop cock of 18.16 approved quality : 93 18.16.1 15 mm nominal bore Each 50 353.25 17662.5 Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 94 18.17.1 25 mm nominal bore Each 10 622.4 6224 95 18.17.4 50 mm nominal bore Each 5 1026.65 5133.25 Providing and fixing brass ferrule with C.I. 18.20 mouth cover including boring and tapping the main : 96 18.20.1 15 mm nominal bore Each 5 329.3 1646.5 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.1 30 cm length 97 18.21.1.1 15 mm nominal bore Each 20 85 1700 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 98 18.22.1 100 mm diameter Each 20 193.95 3879 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per Litre 15000 11 165000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 99 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 100 18.49.1 15 mm nominal bore Each 50 506.8 25340 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS 18.50 standards and weighing not less than 810 gms. 101 18.50.1 15 mm nominal bore Each 50 820.7 41035 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS 18.51 standards and weighing not less than 690 gms. 102 18.51.1 15 mm nominal bore Each 20 798.95 15979 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 103 18.52.1 15 mm nominal bore Each 50 670.45 33522.5 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 104 18.53.1 15mm nominal bore Each 50 574.3 28715 18.54S PTMT FITTINGS Providing and fixing PTMT, push cock of 18.57 approved quality and colour. 18.57.1 15 mm nominal bore, 98 mm long, weighing Each 75 112.8 8460 105 not less than 75 gms 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS HUBLI DIVISION-ENGG/SOUTH WESTERN RLY Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 106 19.1.2 150 mm diameter Metre 50 695.8 34790 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 107 19.6.4 300 mm dia. R.C.C. pipe Metre 50 994.3 49715 108 19.6.7 600 mm dia. R.C.C. pipe Metre 25 2243.4 56085 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent Kg 200 495.05 99010 or dyed to required shade according to IS: 109 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent Kg 150 598.6 89790 or dyed to required shade according to IS: 110 1868, Minimum anodic coating of grade AC 15) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in 21.2 panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative Sqm 50 1139.3 56965 111 lamination on one side and balancing lamination on other side HUBLI DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 50 1176.8 58840 112 (weight not less than 10kg/sqm) 21.18 Providing and fixing 12 mm thick frameless Sqm 50 5325.9 266295 toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing 113 arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in- charge (Door handle, lock and stopper etc. to paid separately) 22.0 WATER PROOFING 22.1S General 22.5 Providing and laying water proofing Sqm 100 617.05 61705 treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second 114 layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Total 11476897.80