WELCOME MAINT AND PERIODICAL SERVICES TO MD ACCN IN TECH AREA AT AFS UNDER GE (AF) JORHAT

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and as directed.

All as per Serial item No. 1 here-in-before but exc. 1.5 Sqm and not exc. 4 Sqm each.

Taking down shutters of any description exc. 1 Sqm and not exc. 4 Sqm each complete all as specified and as directed.

All as per Serial item No. 3 here-in-before but exc. 1 Sqm and not exc. 2 Sqm each.

S&F 2nd class hard wood plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

S&F 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick factory made 2nd class hard wood, plain, framed, panelled shutter (2 panels) with lock rail and panel of commercial ply or 12mm thick veneered particle board with 9mm BWP commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing shown in SSR Part-II as approved complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in SSR Part-II complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and door as in new door/window complete all as specified and as directed.

S&F as in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and door as in old door/window complete all as specified and as directed.

S&F mild steel work flat iron as in bands, straps, hold fast, plain angle cleat, wall tie, etc. and similar small articles conforming conforming to Fe 410-0 or Fe-310-0 compelete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping, PCC block for fixing of hold fast, sanitary fittings, etc. complete all as specified and as directed.

S&F 75mm long butt hinges "medium weight" cold rolled mild steel complete all as specified and as directed.

All as per Serial item No.16 here-in-before but 100mm long.

S&F 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

All as per Serial item No.18 here-in-before but of 150mm long.

S&F 150mm size extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

All as per Serial item No.20 here-in-before but of size 100mm.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 100mm long stainless steel butt hinges complete all as specified and as directed.

S&F as in repairs hydraulically regulated door closer aluminium body, heavy duty designation No.3, universal type, suitable for door shutter weighing between 61 Kg to 80 Kg complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described for, over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed.

M&L for preparation surfaces of wood and wood based materials new or old surfaces of any description and girth, not otherwise described for and treated with applying two coats of creosote oil acomplete all as specified and as directed.

S&F as in repairs 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, etc. complete all as specified and as directed.

M&L for preperation of old wall surfaces and applying one coat of white wash complete all as specified and as directed.

All as per Serial item No. 28 here-in-before but as on ceiling.

M&L for preparation of old surfaces of wall (plastered or unplastered) including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion (OBD) complete all as specified and as directed.

M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over and including one coat of chalk whitening primer including 2mm thick wall care putty complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described for, over 10cm width or girth and applying one coat of synthetic enamel paint (first grade quality) complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described for n. exc. 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint (first grade quality) complete all as specified and as directed.

M&L for preparation of old steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying one coat of synthetic enamel paint (first grade quality) on complete all as specified and as directed .

M&L for preparation of old old steel and iron surfaces of any description not exc.10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint (first grade quality) complete all as specified and as directed .

M&L for preparation of old decorated plastered surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surface complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of walls and applying one coat of weather coat paint complete all as specified and as directed.

Dismantling wall / ceiling boards (fibre, pulf, insulation etc.) wall or insulation boards/slabs/blankets, any thickness including cover fillets and removing unserviceable material from site of work complete all as specified and as directed.

M&L for 5mm thick colour PVC prelam sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partitions inclusive of solvent cement and fixing at site complete all as specified and as directed.

M&L for 4mm thick plywood grade BWR, type BB fixed to timber frame work with screw complete all as specified and as directed.

M&L for 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought, sectional area exc. 6.0 sq.cm but not exc. 13.0 sq.cm (as in cover fillets) screwed with nails or brads complete all as specified and as directed.

Dismantling timber scantling, 40sq.cm and over in section, in any position, in unframed work complete all as specified and as directed.

Dismantling timber fillets, rails, posts, rafter purlin etc. under 40 Sq.cm in section in any position as in unframed work complete all as specified and as directed.

M&L for 2nd class hard wood clean sawn on faces as in framed work complete all as specified and as directed.

M&L for renewing tiles in patches area not exc. 5 sq.m including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete complete all as specified and as directed.

Taking down cement plaster of any description on brick walls or on concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc and removing the same from the site(s) complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preperation of new plastered surfaces of walls and applying two coats of OBD (oil bound emulsion distemper) over and including one coat of primer complete all as specified and as directed.

S&F door seal of any description complete all as specified and as directed.

S&F 40mm width continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F 75mm size brass handles, cast type, polished bright complete all as specified and as directed.

S&F magnet door catcher as in cupboard and other similar items complete all as specified and as directed.

S&F as in repairs floor door stopper of size 150mm, aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. NOTE : The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ.

M/S AT DHAR AND CO (BID ID -3392130)

4S ASSOCIATES (BID ID -3388631)

M/S RK SAHA AND CO (BID ID -3392048)

M/S SAIKIA ENTERPRISE (BID ID -3392566)

NIHAR ENTERPRISE (BID ID -3388745)

M/S KESHAVECONSTRUCTIONS (BID ID -3392643)

M/S GOPAL ROY AND CO (BID ID -3391721)

Bidder Name

NIHAR ENTERPRISE

M/S RK SAHA AND CO

M/S GOPAL ROY AND CO

M/S KESHAVECONSTRUCTIONS

M/S SAIKIA ENTERPRISE

M/S AT DHAR AND CO

4S ASSOCIATES

MridulCh Baruah