PROVN OF SPECIAL REPAIR TO ROOF TREATMENT AND INTERNAL WATER SUPPLY,EXTERNAL WATER SUPPLY PIPE LINE, CERTAIN MINOR AND REVENUE WORK UNDER GE SATWARI

Amount

Demolition of cement concrete of any description and in any position and removing the rubbish from the work site out side defence permises.

Dismantling floor, hearth or wall tiling including complete cement mortar bedding, terrazo dado from wall surface removing serviceable tiles to store and rubbish off the premises.

Excavation in trenches n.exc 1.5 m wide and n.exc 15 m in depth for laying of pipes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft loose soil all as specified and directed.

M&L for surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in sooft/loose soil all as specified and directed

Returning filling in, trenches including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil complete all as specified.

Removing excavated surplus materials to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

M&L for hardcore of broken bricks gauge n.exc 63mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface

Note for item No 3 to 7 :- During the excavation any damage to the existing services like telephone cable,electric cable, sewage line etc will be repaired by the contractor at his own risk & cost. No extra payment will be born by the dept. on this account.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each etc complete all as specified and as directed

Plain cement concrete 1:2:4 type B-2, (using 40 mm graded stone aggregate) 75 mm thick as in floor,path,pavings, hardstanding and similar works,finished even and smooth without using extra cement, laid including necessary form work complete all as specified.

Finishing Surface of concrete floor by brooming finishing the surface concrete topping in green Condition

Forming Expention joints 75 mm deep x 10mm wide filled with sealing with bituminous sand filler 1:3 complete all as specified and directed.

M&Lnon skid joint free ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1 :4 etc complete.

M & L Glazed digital ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 all as specified. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

Supply and fixing in repair stainless steel plate rack of size 24"x30"x10" complete all as specified. Make Prayag cat Part No P-330 or equivalent in NIRALI, Kobra, Neelkanth, Jaynaa, Blue Star

S&F in repair vitreous china squatting pan “ORISSA” pattern size 580mm X 440mm, white with PVC (SWR) P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. Make:- Cera Cat Part No Clovin S3010106 or equivalent in jaquar, kohlar.

S & F in repair 10 ltrs capacity PVC low level flushing cistern, ISI marked of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long and PVC connection 450mm long complete all as specified and as directed Make :- Cera Cat Part No B1010107 or equivalent in jaquar, kohlar.

S&F vitreous china wash basin snow white,flat back of size 515x410mm including 32mm dia PVC waste pipe, CP brass waste coupling 32 mm dia full thread , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements complete at site and all as directed by Engr-in- charge Make :- Make :- Cera Cat Part No S2040102 or equivalent in jaquar, kohlar.

S&F 15mm bore cast copper alloy chromium plated Bib cock complete all as specified and as directed Make:- ESSCO Cat part No SQT-511KN or equivalent in jaquar, kohlar,cera.

S&F 15mm bore cast copper alloy chromium plated angle cock & cup concealed type complete all as specified and as directed Make:- ESSCO Cat part No SQT-526KN or equivalent in jaquar, kohlar,cera.

S&F 15mm dia bore , cast copper alloy, pillar cock rocket type with aerator screwed down high pressure, with or without lettered 'Hot' or 'Cold' and fly-nuts, screwed for iron pipe and fixed Cat Part No ESSCO Cat part No SQT-507KN or equivalent in jaquar, kohlar,cera.

S&F 15mm bore cast copper alloy chromium plated bib cock two way with wall flange complete all as specified and as directed Make:- ESSCO Cat part No SQT-512ANKN or equivalent in jaquar, kohlar,cera.

S&F in repair conealed stop cock with sliding flange 15mm MAKE :- ESSCO Cat Part No SQT-514FKN or equivalent in jaquar, kohlar,cera.

S&F in repair fancy type health foucet (ABS Body) with 1 mtr long easy flex tube in chrome finish & wall hook Cat Part No :- ALD579 Make :- ESSCO Cat Part No ALE-ESS-585 or equivalent in jaquar, kohlar,cera.

S&F in repair Brass Chromium plated swiveling shower roses 125mm etc complete and all as specified and as directed

S&F brass chromium plated tubular towel rail 60 Cm long complete all as specified Make :- ESSCO Cat Part No AEC-1111 or equivalent in jaquar, kohlar,cera.

S&F in repairs PVC Grating Square 150mm complete all as specified Make Prayag Cat Part No 115 or equivalent in Shakti, Polytuf.

S&F in repair PVC corrugated waste pipe 32mmx 800mm long Make Prayag Cat Part No 327 or equivalent in Shakti, Polytuf.

S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated braket guard and railing 60cm long complete all as specified and as directed

S&F in repairs PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut complete all as specified & as directed.

Taking up or down 15mm dia bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down 20 mm dia bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed

Supply and fixing 15mm dia bore galvanised mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed

Supply and fixing 20 mm dia bore galvanised mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed

Fixing only 15mm dia bore galvanised mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed

Fixing only 20 mm dia bore galvanised mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified.

S&F in repair, 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

Taking down CI pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

S&F ( up to 4th floor) Cast iron,100 mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors.

S&F ( up to 4th floor) Cast iron, 75mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenchesor in floors.

S&F ( up to 4th floor) Cast iron,100 mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall.

S&F (up to 4th floor) Cast iron, 75mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall.

S&F ( up to 4th floor) 100 mm bore, Branch pieces, single Tee (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches , including oval access door complete all as specified and directed.

S&F ( up to 4th floor) 75mm bore, Branch pieces, single Tee (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches including oval access door complete all as specified and directed.

S&F cast iron Bends, 100 mm bore, diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F cast iron Bends, 75mm bore, diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 etc complete all as specified and as directed

S&F in repair Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S & F in repair Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and as directed

S&F aluminum handles cast type anodized 100 mm size etc complete all as specified and as directed

S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long etc complete all as specified and as directed.

S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed

Material & labour factory made steel ventilator top hungd double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/openning for cooler/AC where required. Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No. CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one coat of coal tar on the ends of steel frame in contact with brick/concrete surface. (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames. (iii) PCC block for embedding lugs.

Supply only 3mm thick, figured glass, pin headed type in square in n exc 0.5 sq.m in each pane etc fixed with oil putty etc complete all as specified and as directed

Supply only stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified.

M&L two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

welding in repair n exc 2.5CM in length for thickness of metal to be welded n exc 6mm etc complete all as specified and as directed

Rendering 15mm thck in CM 1:3 or Plain Cement Concrete as in sunken floors without extra cement on walls/floors and including mixing of water proofing compound (WPC shall be measured and paid separately)

M&L applying a coat of bituminous primer conforming to IS-3384 @ 0.5 Kg/ sqm on prepared surface of roof/sunken slab after drying of primer apply APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application and finally apply a coat of hot blown 82/25 graded bitumen conforming to IS-702 @ 1.2kg /sqm of plaster surface.

M&L Cement concrete type E-2, 1:5:10 ( 40 mm graded agregate) in Sunkan filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L 40 mm dia G I tubing heavy grade galvanised laid over floors as a spout pipe in sunken floors all as specified.

Material and labour for rendering 05mm thick in CM (1:3) as in ceiling finished even and smooth w/o using extra cement.

Material and labour for rendering 15mm thick in CM (1:4) on brick surfaces or concrete surfaces finished even and smooth w/o using extra cement etc complete all as specified.

Description all as per Srl item No 69 but in CM (1:6) finished even and smooth w/o using extra cement.

Material and labour for two coats white wash on old surfaces of wall including preparation of surfaces etc complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat alkali resistant priming paint etc complete all as specified and as directed

M&L Preparing new plastered surface, and applying two coat of white wash on ceiling all as specified.

M&L Preparing old plastered surface of ceiling and one coat of white wash complete all as specified and as directed

M&L applying three coats of white wash on wall including preparation of newly plastered surfaces complete all as specified & as directed.

Removal of complete existing water proofing treatment of any description on roof ( including Brick/PCC tiles) surfaces of any descriptionand washing down with water to remove dust, foreign items etc complete all as specified and as directed

Roughning surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3kg/sqm etc complete all as specified and as directed

M&L for P.C.C 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction.

M&L for preparation of newly sufrace of app membrane and applying two coats of water based bituminious alumunium paint @ 200 ml per sqm etc of complete all as specified and as directed

M & L cutting out cracks to ‘V’ section in existing roof or terracing, cleaning out, wetting and filling solidly a hot mixture of bitumen and dry sand in proportion of 1:1 by weight complete all as specified and as directed

M & L for incinerator built in brick work 1:4, shown in drawing No CEPZ Drg No. CEPZ/TD-345/2008 sheet No 1/1. complete all as specified and as directed

S&F 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, three layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting including taking down of exisiting unserviceable tank complete all as specified in SSR Part -I complete all as specified and as directed

S&F 1000 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified,triple layer construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia gi pipe medium grade overflow pipe 600mm long with fitting including taking down of exisiting unserviceable tank complete all as specified in SSR Part -I complete all as specified and as directed .

Disconnecting existing tank of capacity exceeding 250 and not exceeding 500 ltrs, setting aside (or lowering if required) for repair including cleaning & removing all scales/dirt etc from tanks & from mouths of circulating pipes and hoisting if required, reconnecting and refixing position etc, complete all as specified and directed

Disconnecting existing tank of capacity exceeding 500 and not exceeding 1000 ltrs, setting aside (or lowering if required) for repair including cleaning & removing all scales/dirt etc from tanks & from mouths of circulating pipes and hoisting if required, reconnecting and refixing position etc, complete all as specified and directed

Supply and fixing in repair PVC Tank covers with locking arrangment suitable for 500/1000 ltr capacity PVC Water tank.

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete.

Taking down CI/PVC pipes 100/110 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

S&F PVC (SWR) type 'B' pipes single socketed, 110 mm dia, in any length with rubber ring joints,fixed to wall complete all as specified. Make :- Supreme/Finolex/Kisan

S&F PVC (SWR) type 'B' bends, 110 mm any radius complete all as specified. Make :- Supreme/Finolex/Kisan

S&F PVC Stack clamp suitable for withholding 110mm dia PVC (SWR) pipe complete all as specified and as directed Make :- Supreme/Finolex/Kisan

Supplying,laying,jointing & testing of galvanised steel tubing 20 mm bore medium grade with screwed /flanged joint together with all fitting such as bends, elbows,tees,short pieces and union etc laid in trenches complete all as specified and directed.

Description all as per Srl item No 95 here in before but for 25mm bore pipe.

Description all as per Srl item No 95 here in before but for 40mm bore pipe.

Description all as per Srl item No 95 here in before but for 50mm bore pipe.

Supply and fixing Gun matel gate /globe valve,screwed both ends for iron pipe of 20 mm bore ISI marked all as specified and directed.

Description all as per Srl item No 99 here in before but 25 mm bore pipe

Description all as per Srl item No 99 here in before but 40 mm bore pipe

Description all as per Srl item No 99 here in before but 50 mm bore pipe

Cutting of existing cast iron pipe line of 150 mm bore in position for inserting of CI Special such as tees,bend,coller,tail piece etc for fixing of sluice valves/for branch connection etc.

Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

M&L for complete point wiring for One light/ fan point/exhaust fan point controlled by one way switch 6 Amps including taking down and refixing of existing tubelight/holder/exhaust fan/ceiling roses with 1.5 Sqmm single core multi stranded copper conductor FRLSH-PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH-PVC insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into GI modular sunken boxes including white cover plate with frame as per relevant IS for mounting moudlar switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

All as per srl item No 105 above but for One 3 pin Socket outlet 6A point on same board.

All as per srl item No 105 above but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

S & F moudlar switch piano flush button single pole one way, 6 Amp,1 moudle. Complete all as specified and directed. 240 V

Supply and fix moudlar Socket outlet 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed.

Supply and fix moudlar Socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed.

Supply and fix moudlar Switch piano made of polycarbonate flush button single pole one way, 16 Amps, 230/240 V

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc.

M/S BEE AAY CONSTRUCTIONS

M/S Raman Construction Co.

M/S PARAMJEET SINGH

M/S shakti steel industries

CELMAC REGD