PROVN OF SHEDS AT VARIOUS LOCATIONS AT AF STN UTARLAI AND PROVN OF SLIDING GLASS WINDOW WITH GRILL AND MESH AT OTM TECH COMPLEX AT CHAUTAN UNDER GE (AF) UTARLAI

Amount

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line, cable trenches or for manholes etc not exceeding 10 sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (40 mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed

M&L for errection and fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240 complete all as specified and directed

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde-E 250) quality A

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter K sunk) forming holes, with riveted, bolted or welded attachment Fe 410-W(Gde-E 250) quality A complete all as specified and directed

M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde-E 250) quality A complete all as specified and directed

M&L preparation of new steel surfaces and applying for two coat of synthetic enamal paint over a coat of red oxied primer surfaces of any description, over 10 cm in width or girth, not otherwise described

M&L for pre-painted galvatune aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof vering/ cladding to wall, fixed with self tapping screws complete all as specified and directed

Removing excavated soil, exc 50 m but n exc 100 m and deposited where directed at a level n exc 1.50 m above the starting point

M&L for two coats of cement base paint over a coat of primer on un-plastered or new plastered surface of wall and including preparation of surface complete all as specified and directed. Note: Cement base paint shall be applied by the brush not by spray gun.

M&L preparing new steel surfaces n.exc 10 cm in width or girth of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Rendering 15 mm thick on concrete surfaces in CM (1:4) finish the surface even and smooth without using extra cement complete all as specified and directed.

S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F for Mild steel flats as in wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified .

M&L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

M&L 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white l fixed with screws to timber/Aluminium frame work all as directed.

S&F extruded aluminium alloy barel tower bolt 150mm long type anodized ISI marked.

S&F Aluminium (Die cast) Body Door closer hydraulicallyregulated,designation No. 3. universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, with vulcanised rubber piece.fixed in floor complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with SS wire staple complete all as specified and directed.

S&F Sheet glass 4.8mm thick ordinary quality and glazing with clips/gasket in square exc 0.5 sq. m in each pane fixed to aluminium door/window shutters complete all as specified and directed.

M & L precast cement concrete block masonry type C1, 1:3:6 (using 20 mm graded stone aggregate) with solid block or slab 10 cm thick and setting in mortar 1:4 complete all as specified and directed.

M&L 10 mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces finished surface is even and smooth without using extra cement complete all as specified & directed.

M/s Sati Jasnath Enterprises

M/s Malinath Electricals