PROVISION OF SPECIAL REPAIR TO BLDG NO P-29 AND P-30 CIV LINE QTRS BT REGT, SPECIAL REPAIR TO ROOF OF BLDG NO P-136 OF AE REGT AND 01 X MINOR WORK IN THE AREA OF AGE B/R II UNDER GE (N) AHMEDNAGAR

Amount

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for moorum filling in floors or paving laid in layers n.exc. 15 cm thick spread leveled and rammed including watering complete all as specified and directed

M & L for hard core of gauge etc. 63 mm but n. exc. 100 mm deposited spread and leveled in layers n. exc. 15cm thick water and rammed etc. Complete all as specified and directed.

M&L for for providing 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as directed.

M&L for 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement and no pigment ,any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl leveled with plate vibrator & sweeping etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles digitally printed 300x450mm, 7-8 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L for joint free /rectified anti skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile 400x400mm , as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.

M&L for joint free anti skid ceramic coloured tiles 300x300mm 7-8mm thick matching to dado tiles area of each tile, as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.

M&L for joint free / rectified anti skid ceramic coloured tiles 8-10 mm thick as approved by GE (square / rectangular) area of each tile 600x600mm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6 ) set and jointed with white or coloured cement to match the shade of tile etc complete all as specified and as directed

All as per item No 10 but as in dado/skirting on vertical surfaces over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick Screed bed etc complete all as specified and directed by Engineer-in-Charge

M&L for Machine cut cudappah stone slab 20-25mm thick over and including 15mm thick cement and sand screed in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Material and Labour for 75mm thick plain cement concrete type C-1 (1:3:6) using 20 mm graded stone aggregate as in plinth protections & path, complete all as specified

M&L for 30mm thick rough dressed lime stone slab (shahabad) flooring, laid dry, jointed and pointed in cement mortar 1:6 and pointed in cement mortar 1:3 in floor/plinth etc over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed

Demolition of brickwork or stone bouilder masonary built in cement mortar or lime mortar complete all as specified

M&L for Walling of random rubble,uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified

M&L for old size brickwork with fly ash bricks straight or curved on plan exc 6m mean radius,built in CM 1: 6 complete all as specified

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in 1: 6 complete all as specified

Taking down cement mortar plaster on brick or stone walls, raking out joints, hacking for key complete all as directed

M&L for rendering 5mm thick on concrete surface of ceiling in CM 1:3 finished even and fair without using extra cement complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or on concrete surfaces in CM 1:6 finished even and fair without using extra cement including sagol finished complete all as specified.

M&L for rendering, 15 mm thick on brick/Stone Masonry/concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement including sagol finished complete all as specified.

M/L for 15 mm thick rendering on wall surface in CM 1:4 in with water proofing compound incl. finishing the surface even and smooth without using extra cement. (WPC shall be measured and paid seperately)

Supply only integral water proofing compound.

Raking out cement mortar joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses etc complete all as directed.

M&L for Pointing to random rubble or polygonal rubble uncoursed or brought up to courses in CM 1:4 etc complete all as directed.

M & L for preparation of newly plastered surface of wall and apply two coats of OBD over a coat of primer any height including scaffholding etc complete all as directed.

M & L for preparing old plastered surfaces of walls and apply one coat of OBD, finished with roller finish on plastered surfaces of wall any height including scaffholding etc complete all as specified and directed

M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed

M & L for preparation of new plastered surfaces of wall and applying two coats for cement based paint any height including scaffholding etc complete all as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparation of old plastered treated surfaces of walls by brooming down and and applying one coat of weather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surfaces complete all as specified and as directed.

M & L for preparation of newly plastered surface of wall and apply three coats of white wash any height including scaffholding etc complete all as directed.

M&L for preparation of old plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smook soot, moulds, moss and efflorescent salt, trading oil and greasy spots and applying one coat of white lime wash at any height including scaffholding etc complete all as specified and directed by Engineer-in-charge.

M & L for preparation of newly plastered surface of ceiling and apply three coats of white wash any height including scaffholding etc complete all as directed.

M&L for 2 mm thick wall care putty etc complete all as specified and directed

S&F fix in repairs wash hand basin with pedestal vitreous China white , flat back or angle type of size 550 X 400 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc complete all as specified and directed by Engineer-in-Charge

S&F vitreous china counter top, wash hand basin, "OVAL" shaped,white of size 550x400mm mounted granite stone slab platform by cutting on oval shaped etc and including 32mm waste fittings etc complete all as specified and directed.

S&F in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistern etc complete all as specified and directed by Engineer-in-Charge.

S&F vitreous China squatting pan, 'orrisa' pattern wc of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe but including 'P' or 'S' trap and provision of lime concrete bedding

Supply only 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, all accessories etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union etc complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches

S&F looking mirror of size 800 mm X 600 mm, etc complete all as specified and directed by Engineer-in-Charge

S&F 40mm bore low density polythene pipes (HDPE) of pressure rating 6 Kg / cm2 fixed complete to walls, ceiling or in floors etc.

Taking up or down 15 mm bore steel tubing and connections

Ditto all as per Sr item No 48 above but 20 mm bore tubing

Ditto all as per Sr item No 48 above but 25 mm bore tubing

Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified.

Ditto all as per item No 51 above but 20 mm bore tubing

Ditto all as per item No 51 above but 25 mm bore tubing

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F in repairs stop cock/ anglecock cast copper alloy, Chromium plated fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge

S&F 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets all as directed.

S&F in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.

S&F bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule fancy type etc complete all as specified and directed by Engineer-in-Charge.

Supply only 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.

Supply only PVC flexible 32 mm Waste pipe for WHB, Sink etc complete all as specified.

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repair PVC (SWR) 110mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in trenches/floor etc complete all as specifed and directed.

--Ditto- alll as per Sr Item No 64 above but as in trenches or floor

S&F in repair PVC (SWR) 75mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in trenches/floor etc complete all as specifed and directed.

--Ditto- alll as per Sr Item No 66 above but as in trenches or floor

S&F PVC (SWR) 110mm bore (dia) soil, waste and ventilating Pipe, Single Socketed, in any length with rubber ring Joints laid in trenches, etc complete all as specifed and directed.

S&F PVC (SWR) 75mm bore (dia) soil, waste and ventilating Pipe, Single Socketed, in any length with rubber ring Joints laid in trenches,etc complete all as specifed and directed.

S&F PVC (SWR) 110 mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed

S&F PVC (SWR) 75mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed

S&F PVC (SWR) junction single, (Single T) equal or un equal 110mm bore

S&F PVC (SWR) junction single, (Single T) equal or un equal 75mm bore

S&F bands, straps, supports or stays for rain waterpipes, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging fans and similar small articles Fe-290 Gde- E-165 or Fe-310-0 complete all as specifed and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, triple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe, tank nipple and connected complete all as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, triple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe, tank nipple and connected complete all as directed.

Cutting chases in brick/ block wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth

Taking down chowkhats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames exc. 1.5 sq. m and n exc 4.00 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description n exc 1 Sqm each etc complete all as specified and directed by Engineer-in-Charge

S & F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified,

S & F pressed steel door frame of size 100 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified,

S&F for factory made 35 mm thick IInd C/L H/W glazed & skeleton shutters open rebated and prepared to receive glass gauge, divided into square or rectangles with plain chamfered or rounded mitered & rebated slash bars including beads mitered for securing glass wire gauge etc all as specified

M&L for factory made 35 mm thick IInd C/L H/W plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F Solid PVC Door frame size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid PVC moulded Door shutter with particle board core, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back space, supplying and fixing in frame at site as per specification & drawing.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S&F for Fe-290 (Gde E- 165)Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

M&L for 1mm thick mild steel sheet earths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain cup board shutter of 18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Butt hinges and necessary S S screws shall be paid separately)

S & F 30mm width of flaps continuous (piano) hinges, mild steel, bright finish or electro galvanised

S&F Powder coated aluminium anodised aluminium frame, shutters for door,windows, ventilators with one or more rebates including joining cleat for fixing etc, rubber / neoprene beading and locking arrangement etc complete all as specified and directed by Engr-in-Charge

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F MS flat iron as in hold fast and similar work as specified Fe-290 Gde- E-165

S&F butt hinges medium weight cold rolled mild steel 100mm long.

S&F stainless steel butt hinges 100mm size

S&F aluminium anodised barrel tower bolts of extruded section 150mm long.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section.

S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised.

S&F aluminium anodised handle of extruded section 150mm long.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 300mm long.

S&F 300 mm mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed.

S & F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed in any position any type of opening with and including wooden beads complete all as directed by Engr-in-Charge.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed in any position any type of opening with and including wooden beads complete all as directed by Engr-in-Charge.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.

Hacking out old broken glass (any thickness size ,quality or description ) from wooden/Steel frames glazed with putty or fixed with beads.

M & L for 3 mm thick sheet frosted/pin headed glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane.

M & L for 3 mm thick sheet frosted/pin headed glass ordinary quality and glazing with oil putty or wooden beads, rubber beding in squares exc 0.50 sqm in each pane

M & L for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

M & L for preparation of old wooden surface and applying one coat of synthetic enamel paint.

Dismantling of unframed work timber scantling 40 Sq, Cm and over in section, in any position

Dismantling of unframed work fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including dismantling corrugated steel sheeting, any gauge, thickness complete all as directed

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified, colour and design as approved by GE including dismantling of plain steel sheeting, any gauge, thickness.

S&F for false ceiling with Vinyl faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metalized polyester foil backing with Vinyl covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturer's instructions / specification and all as directed including taking down/ out existing.

S&F of Steel work in tubular trusses, Perlin, rafhter, including special shaped washer etc. complete conforming to I. S.1161-1979 grade St.-240

S&F of steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as per Fe 410 -W (Gde- E- 250) quality- A

M & L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide.

M & L for preparation of old steel surface and applying one coat of synthetic enamel paint.

M&L for PCC Type C-1 1:3:6 using 20 mm graded aggregates as in edges of floor tiles/blocks roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmetc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge. Make Nirali or equivalent

S & F in repairs looking mirror of size 600 mm x 450 mm etc complete all as specified and directed by Engineer-in-Charge.

S&F curtain rod 25mm dia, having corrugated PVC extrusion on eletric resistance welded MS pipe with fancy type 02 nos Knobs and 02 Nos brackets per each door/ windows etc complete all as specified and directed

M&L for full moulding/half moulding of stone slabs one edge, two edge, as in steps cooking platforms jambs and cills and other similar situations complete all as specified & directed.

S&F pegs set of 6 Nos, power coated aluminium body fixed with cadmium plated screws as directed.

S&F Chromium plated soap dish of Prayag polymers Pvt Ltd or equivalent

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil complte all as specified.

Excavating in trenches not exc 1.5 mtr wide and depth exc 1.5 mtr but n.exc 1.5 m in depth, and getting out in soft/ loose soil.

Returning filling including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm in soft/loose soil .

Removing excavated soil n.exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil.

M&L for PCC (1:4:8) type D2 with 40 mm graded aggregate as in mass concrete.

M&L RCC (Nominal Mix) 1:2:4 type B-1 using 20 mm graded aggregate as in foundation, includings rafts footings ,foundation beams,plinth beams bases for columnsetc complete all as specified and directed

M&L RCC (Nominal Mix) 1:2:4 type B-1 using 20 mm graded aggregate as in beams,cantilevers,linel,shelves etc complete all as specified and directed

M&L RCC (Nominal Mix) 1:2:4 type B-1 using 20 mm graded aggregate as in Chajja complete all as specified and directed

M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including annealed MS wire not less than 0.90 mm dia as required and as directed by Engineer-in charge.

M&L MS TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.90 mm dia as in stirrups spaces, binders and nibs etc. complete.

Formwork to sides of concrete foundations, footings,bases of columns,raft beam plinth beam flat rough finished surfaces of concrete etc complete all as specified and directed

Formwork to sides and soffits of floor beam,roof beam,cantilevers, lintel shelves and similar work flat rough finished surfaces of concrete

Formwork to chullah hoods, chajjas,troughs similar items including edges flat rough finished surfaces of concrete.

M&L for 50mm thick Cement Concrete 1:3:6, type C-2 ( Using 40 mm Graded Stone Aggre-gate) as in plinth protection, laid in alternate bays , finished Concrete Surfaces even and Smooth without using extra Cement, expansion joint filled with 85/25 bitumen & saw dust as complete as specified and directed.

M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) in bed to 150 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested.

M&L for 150 mm dia salt glazed stomeware drain grade 'A' pipes laid in trenches and jointed as specified.

M&L for cutting into existing manholes for connecting new drains of 150mm bore making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round on 3/4 section) in cement concrete 1:2:4 tye B-1 smooth finished and retorming benching as required.

Supply and fixing precast Hume Pipe septic tank of capacity 10 users including necessary excavation and earthwork in any type of strata etc complete all as specified and directed by Engineer-in-Charge Note : (i) Septic tank shall be kept minimum 15 cm below GL and shall be laid according to slope of sewage line. (ii) Make and material shall be as approved by GE.

Dismantling/Demolition of existing roof terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified Note : Demolition should be done by chiselling.

M&L for PCC (1:2:4) Bo using 12.5 mm graded stone aggregate as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc,with approved water proofing compound all as per manufacturer's instructuions on the roof surface to achieve requisite slope all as specified and directed. (Note :- Supply only water proofing compound shall be measured & paid separately).

M&L for providing cement concrete Type C1 1:3:6 (20mm graded aggregate) in kerbs or mud stops, rounded or chamfered on edges

Material and labour for providing water proofing treatment on roofs, as per manufecturer's instructions and as specified after taking down/out as existing at site :- (a) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.30 ltrs/sqmts and allow to dry. (b) Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by thermofusion process as per manufacturers specification including applying one coat of aluminium paint. Make : Super Thermolay of STP / Equivalent in Dr Fixit, FosRoc. Note : (i) Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE. (ii) Certificate from manufacturer shall be submitted by the contractor. (iii) Including taking down of old APP Membrane.

M&L for rendering 10mm thick in CM 1:4 over concrete surfaces finished even and smooth including water proofing compound as per manufacturers instructions.

S&F 110mm bore PVC rain water pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps 8mm dia with two nuts wall nails etc including taking down of any type complete all as specifed and directed.

S&F Rain water pipe 110mm dia PVC (SWR) single mm dia Pvc (SWR) bend any radius, completed as specified and directed.

M&L for cleaning of service tank exc 500 ltr and n exc 1000 ltr by removing all scales, dirt, silt, mud etc from tank and mouth of outgoing pipe including washing of tank internally with bleaching powder after removing scale, dirt, silt, mud etc from tank and removing algae from outside of tank from below bottom of tank and disinfecting tank by spraying sodium hypo chloride solution in tank, Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position etc complete all as directed by Engineer-in-Charge.

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball and high density plastic ball screwed to iron pipe, tank nipple and connected (Minimum weight 15mm-142Gms/20mm-210 Gms) complete all as directed.

M&L for Cutting/Forming square/V-Section grooves in plaster n exc 12mm deep and n exc 15mm on face in existing wall/chajjas and cleaning out and filling up with Dr fixit crack seal including necessary scaffoldings complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody and refixing the same as per existing minor items like screw,clamp,casing/caping is included complete all as specified and directed Engineer-in-Chage.

Taking down existing Tube light fittings/ceiling fans of any type and any wattage for repair and re-fixing the same after repairs to its orginal position including replacement of cable PVC insulated unsheathed with copper conductor of size 1.5 Sqmm (2 runs) upto 0.5 mtr length from light fitting to Ceiling rose including connections all as directed.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 18 module suitble for Mylinc series of Legrand including white plates with frame upto 18 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints recd from user only on required basis it is not necessary to do whole wiring of any whole bldg 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One Fan point/bell point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

S&F in replacement switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F socket 3 pin 5/6 Amp etc all as specified and directed by Engineer-in-Charge

S&F lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

S&F ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S & F double door Sheet metal enclosures factory made DBs SPN, 12 way ,240 volts ,protection class IP-42,Concealed in wall suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

S&F MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

S&F MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

S&F ultra slim square profile LED lighting fixture , environmental friendly, energy efficient ready to use pack Aluminium housing LED Tube light fitiing 22 Watt with LED light source 6500 K,input voltage 140V-270V with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge Make: Smart bright batten or equvalent in Make

Supply and fix exhaust fan,steel body AC Single phase,230 V of size 300 m sweep with blades and frame and louvers 450 mm sweep heavy duty all as specified

S&F in replacement energy saving and environmental friendly log life LED street light 25 watt (Bldg Security Light) made up of pressure die cast aluminium housing with mild power LED as lighting source, surge protection upto 4Kb and PC cover having TOP opening seprate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up to with twin core wisted flexible copper cunductor cale with suitable size of 230 V, 50 Hz etc complete all as specified and directed by Engineer-in-Charge

M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :- (a) LT cable10 Sqmm, 2 core. Note : Excavation, earthwork & pipe protection shall be measured and paid separately under relevent item of this Schedule.

Supply & laying of HDPE DWC pipe ISI marked of outer dia 50 mm polythylene with smooth internal and profiled external surface for non pressure under ground cable icluding coupler and bends etc complete all as specified and directed by Engineer-in-Charge

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

M&L Cutting to existing CI/GI pipe line upto 80 /50/25 mm dia for taking connection up to 25 mm dia GI pipe including insertion of CI /GITee complete all as specified and directed including Exc & earth Work

Supply and lay in trenches/or on wall medium grade steel water tubing galvanised with all fittings and joints etc complete for following size 20 mm bore

S&F 20 mm Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Supply and fix gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for for 20 mm bore.

M/s. N D Karande (BID ID -3126264)

M/S MAHESHWARI ENTERPRISES (BID ID -3126921)

DESIRES ENGINEERS &CONTRACTORS (BID ID -3126727)

M/s. R. R. ASSOCIATES (BID ID -3124376)

MATOSHREE CONSTRUCTION (BID ID -3120705)

Arihant Construction (BID ID -3124201)

M/S-B.R.SONAWANE (BID ID -3126887)