Repairing of existing collapsed encloser wall around stone pillar at Lathia Distt. - Ghazipur

Unslacked Lime

Coarse sand

Surkhi

Molasis

Dry Gum

Belgiri

Brick ballast. ( 20 mm )

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction Nominal concrete 1:3:6 or richer mix (i/c equivalent design charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in cement mortar.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge : All kinds of soil.

Providing and laying in position base concrete for foundation footing in 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources., including supply of all material, T&P, curing etc., complete.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Brick work with common burnt clay FPS (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).

"Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand).

Providing & laying 12 mm cement plaster of mix. Cement mortar 1:4 (1 cement: 4 fine sand). Including supply of all materials labour T.& P. etc., required for proper completion of work.

Providing and fixing of MS grill of 2.63 x 1.20 m with 50x50x5mm size M.S. angle & 16mm square bar including all cutting, fixing and bending etc., required for completion of work.

Providing and fixing of MS gate with 50x50x5mm size M.S. angle & 16mm square bar including all cutting, fixing and bending etc., required for completion of work.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks 1:4 (1 cement : 4 coarse sand .

Provision for Fitting and Fixing of stone Benches as per size top platform 1 No X 1.50M X 0.60 M X0.15 M and vertical base 2 no X 0.50 m X 0.20 M x 0.40 M Including finishing and fixing in concrete base with supply of all materials labour T&P etc. Complete.

Provision for up gradation of C.N.B in chunar sand stone as per design and drawing size (1. C.N.B board .75m x 1.35m x 0.06m 2. C.N.B board pillar .21m x .21m x 1.40m) and text .approved from circle office including engraving the text on stone inking and installation& fixing on ground working site Supply of all labour and materials etc.

Provision for fitting and fixing signage in steel pipe with MS sheet in size 4'X3' including supply of all materials t&p complete.

Provision for taking out iron mesh jali from existing dwarf wall with proper care and store the iron mesh jali in store room properly including all materials T & P etc. complete. (Iron jali size 2.00 X 1.20).

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).