REPAIR/MAINT OF FENCING, BOUNDARY WALL AND MISC BR WKS AT MD ACCN UNDER AGE BR-I, GE BABINA

Dismantling posts or struts of old/unserviceable/broken of any type (wood, steel or RCC) any section including taking out embeded portion and making good disturbed ground all as specified

M & L for surface dressing nexc 15 cm deep, site clearance, to remove the bushes and making area workable.

Excavation in post holes each not exceeding 0.5 Cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 M and making good surface all as specified.

M&L PCC (1:4:8) type D-2 (using 40mm graded aggregate) as in foundation filling and mass concrete etc all as specified & directed.

M &L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed by Engr-in-Charge.

M&L for providing reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) in precast post, fencing post, straing or terminal post, struts etc for fencing, average sectional area exc 100 and nexc 250 sq.cm, with or without chamfered angles and flat, splayed, rounded or mitred tops etc complete all as specified & directed by Engr-in-Charge.

M & L for formwork to edges of concrete, opening in cocnrete walls, floors and roofs and side of RCC/PCC bands in walls and simillar work all exceeding 20 cm wide complete all as specified & directed by Engr-in-Charge.

M&L for TMT bars 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified & directed by Engr-in-Charge.

M&L for TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing clips but in stirrups complete all as specified & directed by Engr-in-Charge.

Dismantling fencing wire mesh any type complete all as specified and directed by Engr-in-Charge.