Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹18.6 CrAccepted-AOC | ₹18.6 Cr Quoted ₹18.7 Cr | 1 | Accepted-AOC being lowest |
| 2 | 2₹20.4 CrRejected-Finance HOUSE NO 769 SOUTH CIVIL LINES MUZAFFARNAGAR UP 241001 | HARDOI | UTTAR PRADESH | 241001 | ₹20.4 Cr | 2 | Rejected-Finance other than lowest |
| 3 | 3₹20.4 CrRejected-Finance 126 A JAIPUR HOUSE AGRA 282010 PH NO 0562 2810176 9897638555 | ₹20.4 Cr | 3 | Rejected-Finance other than lowest |
Tender Value
₹20 Cr
EMD Value
₹13.3 L
Closing Date
2 Dec 2019, 6:00 pmClosed
Chief Engineer Lucknow Zone
HQ CELZ 17, Cariappa Marg Dilkusha PO Lucknow 226002
PROVISION OF REPAIR WING AND HANGER AT AGRA
2019_MES_256941_3
CELZ/AGR/T-09 of 2016-17
Open Tender
Civil Works
750 days
AGRA
Class SS and Category a (i)
8 documents required · 8 mandatory
₹3,000
GE (West) Agra
₹13.3 L
Yes
7 Jan 2020
5 Nov 2019
4 Dec 2019
5 Nov 2019
2 Dec 2019
12 Nov 2019
Amount
Sch 'A' Part-I (Building Work) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.
Construction of block of Drying Hanger, Hanger Cum Packing, Dehumidifier, O.I.C Office and Main Office complete all as shown on drawings and specified
Construction of block of A.C. Storage Shed & Bulk Storage with A.C.Plant complete all as shown on drawings and specified.
Construction of block of Para Repair Wing with AC Plant complete all as shown on drawings and specified.
Construction of block of Guard Room complete all as shown on drawings and specified.
Construction of block of Vehicle Parking shed A complete all as shown on drawings and specified.
Construction of block of Vehicle Parking shed B complete all as shown on drawings and specified.
Construction of block of Pump House complete all as shown on drawings and specified.
Construction of block of Labour Rest Room complete all as shown on drawings and specified.
Construction of block of Watch Tower complete all as shown on drawings and specified.
Total amount of Sch 'A' Part II (Site clearance, excavation and earth work)
Total amount of Sch 'A' Part III (Internal Water Supply )
Total amount of Sch 'A' Part IV (Internal Electrification)
Total amount of Sch 'A' Part V (Sewage Disposal)
Total amount of Sch 'A' Part VI (Road, Path, Culvert and hard standing)
Total amount of Sch 'A' Part VII (Area Drainage)
Total amount of Sch 'A' Part VIII (Security wall)
Total amount of Sch 'A' Part IX (External Water Supply)
Total amount of Sch 'A' Part X (External Electrification and Dehumidifier )
Total amount of Sch 'A' Part XI (Rainwater Harvesting)
Total amount of Sch 'A' Part XII (Lighting Protection)
Total amount of Sch 'A' Part XIII (Fire Fighting and Fire Sprinklar)
Total amount of Sch 'A' Part XIV (Demolition/ Dismantling)
Provided Provisional sum of total Rs 23,11,321.80 for :- (i) Septic tank for 25 users as per TD No 217 sh 1/2 and 2/2- (02 No) (ii) Septic tank for 10 users as per TD No 217 sh 1/2 and 2/2- (02 No) (iii) Septic tank for 50 users as per TD No 217 sh 1/2 and 2/2- (01 No) (iii) Soak well 1.80 meter dia and 3.00 meter depth as per TD No 576 sh 1/2 and 2/2-(05 Nos) (iv) Provn of Steel Gate 5 mtr wide including RCC pillars complete all as shown in Drg No TD/551 - (01 Nos) (v) RCC covered UG sump of capacity 50000 gallons - (01 No)
Sch 'A' Part - XV (Miscellaneous Items) Note - This Schedule is not pre-priced by MES and the pre - priced rate indicated as "Rs 0.00 under col.5 siginifies this fact only.
INTERNAL WATER SUPPLY Single lever wall mixer,three in one system, with provision of both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flench and maze hand shower 95 x 95 mm square shape single flow (Face plate stainless steel and ABS body in chrome finish) and overhead shower 200x200 mm square shape single flow (ABS body chrome plated with grey face plate) including all necessary arrangements complete all as specified and directed. Make :- Jaquar Cart Part No -ORP-10125PM (Wall mixture), OHS-35497 ( Over Head Shower) and HSH-CHR-1655 (Hand Shower )or equivalent of makes specified in Appendix 'D'as approved by GE.
INTERNAL ELECTRIFICATION Point wiring complete for One light/Fan/Exhaust Fan point controlled by one switch with PVC insulated and unsheathed FRLS cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and PVC conduit 25 mm dia medium grade in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.
Point wiring complete for One light point controlled by two way switches with PVC insulated and unsheathed FRLS cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and PVC conduit 25 mm dia medium grade in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.
Point wiring complete for one 5 Pin 5 Amp switch Socket outlet point on independent board, with PVC insualted and unsheathed FRLS CABLE 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and PVC conduit 25 mm dia medium grade in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.
Point wiring complete for one bell/buzzer point controlled by one push button on the same board with other switches, with PVC insualted and unsheathed FRLS CABLE 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and PVC conduit 25 mm dia medium grade in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.
Point wiring complete for one power point, with PVC insulated and unsheathed, FRLS cable 2.5 sqmm (nominal area) ,ISI marked, multi-stranded copper conductor single core including ISI marked 20mm dia PVC conduit medium grade concealed in wall and PVC conduit 20 mm dia medium grade in roof/floor slab & ceiling, pressed GI concealed terminal boxes not less than 1.6mm thick of reqd size and with top cover 3mm thick of plastic laminated sheets of required colour complete, including 2.5 Sqmm, FRLS cable PVC insulated unsheathed copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories and all as specified.
Energy saving sleek and light weight LED batten with high brightness 20 Watt LED retofit type with a nominal system output of 85 lim/watt(min) with PF not less than 0.9 providing homogenous illumination, suitable for surface mounting with 4000K integrated high efficiency LED drive>85% non corrosive complete, including connecting up with twin core twisted flexible copper conductor cable of size 1.5 Sqmm in and including PVC flexible conduit from ceiling rose/connector all as specified and directed. Make:- Philips/Crompton
Suspended LED 20 watt pre wired 4 feet long retrofit tubelight fitting which provieds soft light and glare free symmetrical illumination complete all as specified and directed. Make-Philips/Havells/Wipro. Note: The cost of 2 Nos MS conduit of suitable length upto 1.5 meter with and including fixing arrangements for each fitting shall be deemed included in this item.
Eenergy saving pressure die-cast aluminium IP 66 roadway luminaire with high power 14 Watt LED with a nominal system output of 85 lum/watt(min) with PF not less than 0.9 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 mtr in length and made out of GI tubing 35/40 mm dia/suitable dia light grade bend to shape security light fitting with necessary MS clamps 35/40 mm wide and 6 mm in thickness in suitable length not more than 30 cm or Max length of pipe 1.5 Mtr long with one coat of anti corrosive primer and two coats of aluminium paint including nuts, bolts and washers complete all as directed. Make : Philips Cat no BRP022 P LED 14 CW MR S1 PSU GR P3635.
Eenergy saving 2 feet LED batten with high brightness 9 watt LED retofit rod with a nominal system output of 85 lim/watt (min)with PF not less than 0.9 providing homogenous illumination, suitable for surface mounting with 4000 K integrated high efficiency LED drive >85% non corrosive complete all as specified and directed Make : Philips /Crompton/ Wipro/Havells
Mirror light Decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate body with Minimum 8 Watt & Maximum 11 Watt LED warm white in colour with a nominal system output of 85 lim/watt(min) with PF not less than 0.9 complete. Make PHILIPS, HAVELLS, BAJAJ or techno commercially equivalent makes in Wipro
Highbay light fitting 100W,5700K, minium 16000 lumens with IP 65 protection comprises of a pressure dia cast aluminium housing, heat resistance toughened glass/ polycarbonate, LED lenses, surge protector, BIS electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 sqmm , 3 core complete all as specified and directed by EIC. Make: Philips, Bajaj, Wipro
Glaze wall light, decorative wall mounting fixture in durable plastic gold finish including 0.5 watt green and red lamp complete all as specified and directed . Make : Havells cat part No. LHFOECE1TZ1B014 or equivalnt Bajaj/CG/ Wipro / Philips.
Recessed mounted circular LED down light of 15 watt system wattage constructed out of pressure dia cast aluminum housing and premium quality PMMA diffuser having luminaire efficaty > 80 lm/W and provided with suge supressor of 2.5 Kv complete all as specified and directed . Make : Crompton cat part No. LCDD-15-CDL or techocommercially equivalnt makes mentioned in make list.
Suspended LED 76 watt robust & reliable IP 66 & IK08 midway with PDC housing & toughened glass suitable for suspended including chain and necessary clamping arrangement & available in wide beam ( rotational symmetric) optics fitting which provides soft light and glare free symmetrical illumination complete all as specified and directed . Make : Philips cat part No. BY150PLED76SCWPSU HE SY 120 FG GR or techocommercially equivalnt makes mentioned in make list.
Fully diffused recessed mounted 2'X2' with UGR<19 complete all as specified and directed . Make : Philips cat part No. RC380B LED36S-4000G4 L60 W60 PSD OD WH OC or techocommercially equivalnt makes mentioned in make list.
Ultra sleek recessed downlighter, 4000 CCT complete all as specified and directed . Make : Philips cat part No.DN097B LED 10S-6500 PSU WH or techocommercially equivalnt makes mentioned in make list.
Exhaust Fan high quality engineering plastic, resistant to colour change with anti- statio properties (ventil air) 200 mm sweep 35 watt ,1200 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side(outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable rubber insulated from celling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 1.50 cm height complete all as specified and directed. Make- Usha/Bajaj/havells/CG
Ceiling fan 1200 mm sweep single phase 230V AC, five star rating and ISI marked alongwith steel down rod and connecting up the fan to ceiling rose including provn of three core flexible copper cable of size 1.5 Sqmm not less than 0.5 mtr long for connection including marking MES No complete all as specified and directed. Make: Bajaj model Electra 50 or technocommercially equivalent in CROMPTON/ Orient (summer cool)/Havells.
MCCB VTPN DB double door type, 415 Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated, powder coated complete with out MCCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed.Make :ABB/SCHNEIDER/ Siemens.
MCB DB single pole with neutral sheet metal enclosure double door type, 240 Volts AC, with 200 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated, powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 2 way complete all as specified and directed.Make :ABB/SCHNEIDER/ Siemens.
MCB DB single pole with neutral sheet metal enclosure double door type, 240 Volts AC, with 200 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated, powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed.Make :ABB/SCHNEIDER/ Siemens.
MCB DB single pole with neutral sheet metal enclosure double door type, 240 Volts AC, with 200 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated, powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 6 way complete all as specified and directed.Make :ABB/SCHNEIDER/ Siemens.
MCB DB single pole with neutral sheet metal enclosure double door type, 240 Volts AC, with 200 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated, powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.Make :ABB/SCHNEIDER/ Siemens.
MCB DB single pole with neutral sheet metal enclosure double door type, 240 Volts AC, with 200 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated, powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 12 way complete all as specified and directed.Make :ABB/SCHNEIDER/ Siemens.
MCB DB single pole with neutral sheet metal enclosure double door type, 240 Volts AC, with 200 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated, powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 16 way complete all as specified and directed.Make :ABB/SCHNEIDER/ Siemens.
MCB single pole 6 to 32 Amp rating 'B' Series 240 volt complete all as specified and directed.Make :ABB/SCHNEIDER/Siemens.
MCB single pole and neutral 16 to 32 Amp rating 'B' Series 240 volt complete all as specified and directed.Make :ABB/SCHNEIDER/ Siemens.
MCB single pole 40 to 80 Amp rating 'C' Series 240 volt complete all as specified and directed.Make :ABB/SCHNEIDER/ Siemens.
Modular type 20 Amps power unit for controlling power equipments complete all as specified and directed.Make : Havells cat part No. AHL 0202504 or technically equivlent in SIEMENS.
Submain wiring with two single core 4 sqmm FRLS copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 4 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note:- Two single core 4 sqmm copper conductor, one run PVC conduit and one run of 4 sqmm earth wire shall be considered & measured as one unit.
Submain wiring with two single core 6 sqmm FRLS copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 6 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note:- Two single core 6 sqmm copper conductor, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit.
XLPE insulated armoured heavy duty electric cable with aluminium conductor,1100 volts grade cross sectional area 25 sqmm 4 core including concealed 40 mm GI pipe ( from ground floor TPN DB to first floor TPN DB)complete all as specified
ROAD PATH CULVERT AND HARD STANDING Solar road studs of size 125mmx125mmx25mm Aluminium alloy pressure die cast body, with reflective panel Amber/Red/White (CAT EYE) in built 2 Nos. Holes and installation with apoxy and specially designed nails complete all as specified and directed. Make:- OS 809 (Oscar)/Birla 3-M or equivalent approved by GE. Note:- Holes in road shall be drilled with drill machine and necessary cleaning of hole shall be done with blower prior to installation of road stud.
Delinator made of size 50 mm dia MS pipe 75 cm long with iron jallie including providing three colour reflective tape strips of size 40 mm width around the pipe & fixed in PCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate) complete all as specified and directed. Make: OS 798 (OSKAR) or equvlant as approved by GE.
Two way reflective Cat Eye's ( Road stud) of size 100mmX100mmx20mm (31 or 43 beads each side) with ABS body with reflective pannel made- Amber/Red/White and installation with Epoxy and design nails complete all as specified and directed. Make: OS 787 (OSKAR) or equvlant Birla 3-M or as approved by GE.
SECURITY FENCING Razor wire fencing on swan neck angles complete with fixing with 3 Nos row on each side including cross wire and clamping at 3 Nos places of 3M panel including any cutting, binding complete all as specified and directed.
EXTERNAL ELECTRIC SUPPLY Steel tubular swaged pole complete with cast iron base plate, final taper plug, bolts, nuts & screws as specified type 410 SP-55, 11 mtr long, all as specified and shown on drawings including the followings:- (a) Excavation and earth work in any types of soil, returning filling, well raming and disposal of surplus soil to a distance not exceeding 50 mtr from the starting points. (b) PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in foundation including form work. (c) PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping including form work. (d) PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in base. (e) Painting of poles with one coat of red oxide primer and two coat of aluminium paint before fixing and one coat of aluminium paint after fixing complete, embedded portion shall be painted with two coat of black bituminous paint all as specified. (f) The portion above coping shall be painted in alternative bands of black and yellow colour starting with yellow colour (each band of 30 cm wide) by two coat of super enamelled paint upto 1.5m height.
Supply, Install, testing and commissioning floor mounted on platform transformer of capacity 500 KVA step down out door type 3 phase, 50 Hz, AC, oil immersed, air naturally cooled (ONAN Type), with external cooling tubes / radiators, Double wound core type copper wound having no load voltage ration 11 KV / 433 Volt corresponding to principal tapping, delta connected primary side (HV side) and star connected on secondary side (LV side) in accordance with vector symbol DYN 11 (Vector group – 4) with neutral brought out on LV side and having tapping on HV side for constant out put so as to altervary secondary voltage from + 2.5 % to - 7.5 % in steps of 2.5% by means of manual OFF LOAD taps changing arrangements complete and conforming to IS : 1180 level II ( latest amendment at time of installation ) all as specified The transformer shall be complete with following fittings and accessories consisting as per details mentioned in Annexure - A to BOQ. NOTE :- (i) Annexure- A to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order. (iii) Transformer shall be platform mounted as per TD No 699 and the rates quoted against this item shall be deemed to include for this provision. (iv) The contractor shall arrange factory visit as detailed by accepting officer to check the above system. (v) Transformer should be 5 star rated and internal losses not more than 1% allowed.
Supply, Installation , testing and commissioning out door type Tripple pole switches Air break, (Gang Operated) with 12 insulator and dropout fuses assembly with fuses carriers with fuse element mounted on insulator each pole consisting of galvanised steel base HT insulators as per BSS/ISS, Non ferrous knife and spring loaded contact, Arcing horns machanically operated, horizontal/vertical type mounted on insulator & steel frame, complete with operating mechanism worked from ground level, consisting of GI pipe of adequate length for phase seperation with operating handle for current rating upto 200 Amps for 11000 volts complete all as specified and directed by Engineer-in-Charge.
Supply, laying, jointing and commissioning HT cable XLPE insulated, screened PVC Bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 11 KV (E) grade of cross sectional area 120 Sqmm 3 core conforming to IS: 7098 (Part II) complete all specified and directed.
Cable jointing kit for 11 KV (Earthed) grade for outdoor termination cold shrink type joint complete with jointing material and assessories suitable for 3 core XLPE armoured aluminium conductor of size 120 Sqmm connecting and testing complete all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground level of depth of earth pit not less than 2.25mtr deep below ground level with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth wire 4.0 mm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel etc complete as shown in electrical Plate No.3 of SI Part-I (2009), protected by 15mm bore light grade galvanised iron pipe and other end connected to earthing test point or body of pole or lightning arrestor or main, controlling switch as directed including funnel with watering pipe of 20mm bore light grade galvanised iron wire mesh charcoal or coke and common salt in alternate layers of 15cm (compacted thickness) around the earth electrode and Concrete earth pit in PCC(1:3:6) type C-1, 50mm thick pre cast RCC 1:1.5:3 type A-1 cover slab reinforced with 8mm dia mild steel TMT bar @ 15cm centre to centre both way and suitable handle of 10mm dia round bar, including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc 50m and necessary testing complete all as specified and as directed. (Note : (i) Earthing wire & GI protection pipe beyond 7.5 mt shall be measured & paid separately
Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 240 Sqmm 1 core complete all as specified and directed. NOTE : This cable shall be used for the connection of the AMF panel to Transformer and DG set.
Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 240 Sqmm 3.5 core complete all as specified and directed.
Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 185 Sqmm 3.5 core complete all as specified and directed.
Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 95 Sqmm 3.5 core complete all as specified and directed.
Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 50 Sqmm 3.5 core complete all as specified and directed.
Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 16 Sqmm 4 core complete all as specified and directed.
Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 10 Sqmm 2 core complete all as specified and directed.
Supplying ,installing,testing and commissioning outdoor cubical feeder pillar box suitable for 3 phase, 4 wire, 415 volts,50 Hz and CPRI approved for 50kA/35 MVA rupturing capacity at 415 volts factory made in an approved factory having seven tank treatment process for powder coating provided with suitable gasket to make it dust/vermin proof & general construction confirming to IS:8623/93 including suitable automatic power factor corrector system and comprising of the following accessories consisting as per details mentioned in Annexure - B to BOQ. NOTE :- (i) Annexure- B to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order. Make of panel :Havells / Legrand / ABB / C&S/L&T/Schneider/siemens as approved by GE. MCCB/MCB shall be of same manufacturer as of panel
Supplying ,installing,testing and commissioning outdoor cubical feeder pillar box suitable for 3 phase ,4 wire,415 volts,50 Hz and CPRI approved for 50kA/35 MVA rupturing capacity at 415 volts factory made in an approved factory having seven tank treatment process for powder coating provided with suitable gasket to make it dust/vermin proof & general construction confirming to IS:8623/93 and comprising of the following accessories consisting as per details mentioned in Annexure - C to BOQ. NOTE :- (i) Annexure- C to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order. Make of panel :Havells / Legrand / ABB /C & S/L&T/Schneider/siemens as approved by GE. MCCB/MCB shall be of same manufacturer as of panel
Supplying ,installing,testing and commissioning outdoor cubical feeder pillar box suitable for 3 phase ,4 wire,415 volts,50 Hz and CPRI approved for 50 kA/35 MVA rupturing capacity at 415 volts factory made in an approved factory having seven tank treatment process for powder coating provided with suitable gasket to make it dust/vermin proof & general construction confirming to IS:8623/93 and comprising of the following accessories consisting as per details mentioned in Annexure - D to BOQ. NOTE :- (i) Annexure- D to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order Make of panel :Havells / Legrand / ABB / C & S/L&T/Schneider/siemens as approved by GE. MCCB/MCB shall be of same manufacturer as of panel
Supplying ,installing,testing and commissioning Factory made MPP Type APFC panel board 415 volts with suitable size of bus bar ,AC supply, indoor type , dust & vermin proof, floor mounted, fabricated from CRCA sheet 2mm thick , powder coated, supported on MS. I section. with following accessories consisting as per details mentioned in Annexure - E to BOQ. NOTE :- (i) Annexure -E to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order. Make of panel :Havells / Legrand / ABB / C & S/L&T/Schneider/siemens as approved by GE. MCCB/MCB shall be of same manufacturer as of panel
Weather proof SMC kiosk box of suitable size made out of thermo poly carbonate to accomodate 4 Nos Aluminium bus bar 63 A, 3 phase 4 wire of size 25 mm x 6 mm and 1 No MCB SP 10 amps capacity of size 300 mm x 200 mm x 100 mm, water proof, dust proof, weather proof, IP-65 with hinged door and triangular locks, shock proof, rust proof, corrosion free, acid and chemical resistance, fire retardent & self exting ushing UV resistance complete including necessary arrangements such as 2 x MS clamps with nuts, bolts.etc for fixing on pole complete all as specified and directed. Make : Hansel / Universal switch gear control or as approved by GE.
Steel tubular swaged pole 9 meter long single swan neck type, complete with cast iron base plate, final taper plug, bolts, nuts & screws as specified type 410 SP-31 in true vertical position and inclusive of one coat of zinc chromates primer, one under coat and one finishing coat of good quality of aluminium paint all as specified and as directed by Engineer-in-Charge.
36 watt LED Pressure die cast housing with epoxy powder coated dark graphite grey colour finish prismatic polycarbonate cover with individual LED lens street light luminaries including provision and fixing of three core flexible of 1.50 Sqmm copper conductor cable through pole from junction box to light fitting and other fixing arrangement as required at site complete all as specified and directed. Make: Chrompton Cat Part No LSTP-36-CDL or technocommercial equivalent in Philips/Wipro/Havells.
PVC sheathed and PVC insulated multi-stranded copper conductor of size 2.5 Sqmm 3 core 1100 volts grade with copper conductor for security lights, aviation lights complete all as specified and directed.
HIGH MAST LIGHTING SYSTEM :- (i) Raising & lowering type 15 meter High Mast lighting system complete mast shall be in two section ,hot dip galvanised,inside and outside in single dip,suitable for wind velocity as per IS 875 part 3. There shall be only one longitudinal seem weld section and no circumferential weld. It shall also include accessories for high mast including head frame, 2-post suspension system with steel wire rope 6 mm dia (7/19 construction) double drum winch,Galvanised lantern carriage arrangement suitable for upto 8 luminaries symetrically,lighting finial & integral power tool for raising and lowering operation of the high mast.Make : Bajaj / surya (i) Supply of foundation bolts manufactured from special steel alloy with nuts,washer,anchor plate & templates. (ii) Supply of High power discrete LED Flood light type not less than 150 watt( lumen output not less than 120 per watt AT 220 VOLT) and its control gear/driver etc.-06 Nos.Make Philps BVP 122 LED 150 CWE HE SY20 FG XTFCL S4 or equivalent in /HPL/CG Note: output lumen of LED Light shall not be less than 400 watt MH lamp (iii) Erection of the high mast with the help of suitable equipment and including wiring of luminaries including flexible cable from control panel to lighting carriage all as per manufacturer specification complete. (iv) Supply and installation and commissioning of automatic control panel for switch 'ON'/'OFF' high mast light and raising/lowering of high mast. Control panel consisting of Astro type timer (having facility for operating partial load for full night and the balance load for part night to derive energy savings) and incoming/outgoing MCCBs, and contactors of suitable capacity including provision for by-pass arrangement. (v) Wiring of luminaries with 2.5 sqmm multi core copper ERP insulated PCP sheathed (vi) Lightening arrestor with lightening conductor to be provided as per manufacturer specification.(viii) Twin dome Aviation obstruction light with suitable lamp to be provided as per manufacturer specification. (vii) Testing & commissioning of High Mast System Note :-Earthing of high mast shall be measured and paid separately.
Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure, 302 nos. LED are provided complete all as specified and directed .
Supply installation and connection of 150 W ( lumen output not less than 120 per watt at 220V) Security Search Light with 1m Tripod Stand - High intensity, long range, weather & dust proof Security Search light with highly polished stainless steel reflector-cum-body, toughened front glass fitted to the cast aluminium front ring kept in position by special headed captive bolts screwed down to the flange of the lower ring (with incorporated steel inserts at threaded portions) recessed on the flange of the body, focussing arrangement, G.S.lamp holder with lamp locking arrangement and M.S.Cradle with passivated bolts and stainless steel hardware. The search light fitting would be suitable for installing inside the watch tower cabin with arrangement for both vertical & horizontal operational control. The search light would be supplied with Lamp & its control gear in cast aluminum housing. The search light would be swiveling type & have both vertical & horizontal operational controls. The search light would be supplied with 1 metre tripod stand with castrol wheels for ease of movement inside the tower cabin. (range of light – 850m) complete all as specified and directed .
Cable route indicator for LT cable engraved/casted "LT/1.1 KV" made out of stone/ RCC of size 105cm x 30cm x 40 cm thick (60 cm below ground) and base painted RED complete all as specified and directed.
Cable route indicator for HT cable engraved/casted "HT/11 KV" made out of stone/ RCC of size 105cmx30cm x 40 cm thick (60 cm below ground) and base painted pink , complete all as specified and directed.
Galvanished steel wire chain link fencing and size of mesh 100x100 mm fixed to any type of post with straining bolts etc incl provn of binding wire, complete all as specified and directed.
Fixed type 1000 Amp ACB with sheet metal encloser of sheet thickness 2.0 mm , powder coated with canopy mounted on MS angle frame of 50x6mm leg length 60 mm above the ground and 45 mm under the ground including grouting through PCC, complete all as specified and directed .
EXTERNAL WATER SUPPLY Drilling vertical bore trial bore 250 mm dia at site through any kind of soil with by direct rotary method relater to pilot boring up to 30 metre complete all as specified and directed.Note:location will be given by GE after getting survey of location by CGWB/remote sensing.
Drilling vertical bore trial bore 250 mm dia at site through any kind of soil with by direct rotary method relater to pilot boring above 30 metre and up to 60 metre complete all as specified and directed.Note:location will be given by GE after getting survey of location by CGWB/remote sensing.
Drilling vertical bore trial bore 250 mm dia at site through any kind of soil with by direct rotary method relater to pilot boring above 60 metre and up to 90 metre complete all as specified and directed.Note:location will be given by GE after getting survey of location by CGWB/remote sensing.
ERW MS casing pipe 150 mm bore of presure rating 6 Kg/Sqcm, 7 mm thickness confirming to IS:4270-2001, ISI marked, pipe jointed and welded with coupler ring throughout the circumference of the pipe and coupler rings both side as in bore well complete all as specified and directed.
ERW MS slotted casing pipe 150 mm bore, of presure rating 6 Kg/Sqcm 7 mm thickness, confirming to IS:4270-2001, ISI marked having slot of 1.59 mm each wide and 75 mm long including pipe jointed and welded with coupler ring throughout the circumference of the pipe and coupler rings both sides as in bore well complete all as specified and directed.
Well cap of 150 mm dia size on top of the pipes with locking arrangement complete all as specified and directed.
MS bail plug of 150 mm dia size 6 mm thick of 1 meter long with MS Rod 25 mm dia size welded to it at bottom bail hook complete all as specified and directed.
Pea gravel of 2 mm to 8 mm size of approved quality as ordered to pack around the casing/slotted pipes in bore well in annular space between Well Assembly and bore hole wall sound be over min 15 - 18 cm and throughly washed before surrounding in the well and treated with suitable amount of Sodium Hexameta Phosphate for 24 hours before developing by compressed air complete all as specified and directed.
Developing tube wells by compressed air with minimum pressure of 10 Kg/Sqcm and minimum 450 CFM all as specified in IS:11189-1985, Para 4.3 and directed. Note: Compressor, pump, pipe and other allied items will be arranged by contractor and no extra payment will be made by the dept.
Developing tube wells by over pumping with minimum 25% higher capacity of pump set after development with compressor for tube well complete all as specified and directed. Note :- Cable shall be arranged by the contractor.
Yield testing for the bore well with the help of V notch tank 90 degree by continuously pumping for 16 hours complete all as specified and directed.
Electric logging in pilot bore for quality of underground water including report interpretation of tube well including making strata chart complete all as specified and directed.Note:- Electric logging shall be carried out by any approved Govt Agency
Supply, fixing and lowering submersible pump set, of capacity 10 HP, 3 phase 415 volts directed 70 mtr head discharge 220 LPM complete all as specified and directed.
PVC insulated submersible copper cable of size 6 Sq mm, 3 Core 1100 volts grade complete all as specified and directed.
Submersible pump controller in sheet steel enclosure, three phase complete with MCB, over load relay, under volt/Over volt relay, contactor, capacitor, volt meter, Amp meter,ON & OFF push butten complete including fixing arrangement suitable for 10 HP submersible pump complete all as specified and directed.
Water testing for/bacteriological/chemical analysis and from approved laboratorycomplete all as specified and directed.
Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 25 Sqmm 4 core complete all as specified and directed.
Monoblock Pump set electrically driven horizontal end suction, confirming to IS -12469 1988 with CI casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitablefor continuous operation with range of operation 0% to 150% of rated capacity for 440 volts, 3 phase , 50 Hz AC supply 60m head 455 LPM, 10 HP (discharge including foundation channel, PCC foundation made upto level including suction pipe 50mm dia GS heavy grade as reqd complete as specified and directed.
Foot valve 50 mm bore, cast iron body, ball type, with flanged and drilled ends and synthetic rubber coated MS ball, conforming to relevant IS, ISI marked, including all joints, bolts and nuts, washers, complete all as specified and as directed
Supplying ,installing,testing and commissioning outdoor cubical feeder pillar box suitable for 3 phase ,4 wire,415 volts,50 Hz and CPRI approved for 50KA/35 MVA rupturing capacity at 415 volts factory made in an approved factory having seven tank treatment process for powder coating provided with suitable gasket to make it dust/vermin proof & general construction confirming to IS:8623/93 including suitable automatic power factor corrector system and comprising of the following accessories consisting as per details mentioned in Annexure - "F" to BOQ. NOTE :- (i) Annexure- "F" to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order.
RAIN WATER HARVESTING Boring holes 250 mm dia in soft/loose soil for under reamed piles or bore well and getting out and disposal of spoil to a distance not exc 50 mtr complete all as specified and directed.
uPVC slotted pipe 150 mm dia with vertical 3 mm slots including all fittings like sockets etc for bore well casing suitable for 0.4 mpa working pressure complete all as specified and directed.
PVC bail plug suitable for 110 mm dia PVC pipes complete all as specified and directed.
PVC well cap for 110 mm dia pipe complete all as specified and directed.
Loose filling with gravels of river of gauge 80 to 150 mm in soakage pits, soak wells etc complete all as specified and directed.
Shingle filling 3 to 6 mm dia size, laid in layers not exc 15 cm thick, spread, levelled complete all as specified and directed.
COOLING APPLIANCE Supply, installation, testing of split type air conditioners inverter electric driven single phase of capacity 2.0TR, BEE 5 star rating, twin rotary compressor, having ISEER 4.70, sound level (IDU)-37 db, rated power input not more that 2070 watts, 230 Volts, 50 Hz, Make: Hitachi or technocommercially equvalent in O GENERAL/Daikin Note: Minium 1 Year warrenty on product and 5 Years commpressor.
Supply, installation commissioning of water cooler fully stainless steel Electric driven (Single Phase), having approx storage capacity of 80 liters and normal cooling capacity of 40 liters per hour completee all as specifired and directed. Note Compressor energy efficient hermitically sealed. Compressor with suction gas cooled equiped with overload protector, relays and other accessories.
supply, installation commissioning of water cooler fully stainless steel Electric driven (Single Phase), having approx storage capacity of 120 litres and normal cooling capacity of 60 liters per hour completee all as specifired and directed. Note Commpressor energy efficient hermitically sealed commpressor with suction gas cooled equpied with overload protector, reals and other accessories.
Voltage stablizer with built in high cut, buzzer & timer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 to 250 Volts with out put voltage stablized at 230 V with accuracy of (+ 2.5%), 50 Hz of capacity 3.0 KVA complete all as specified and directed.
Voltage stablizer copper wounded with built in high cut, buzzer & timer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 to 250 Volts with out put voltage stablized at 230 V with accuracy of (+ 2.5%), 50 Hz of capacity 5.0 KVA complete all as specified and directed.
DG SET Supply, Installation, testing and commissioning of ' Silent type' Diesel Generating set having Prime power rating of 500 KVA, 415 Volts at 1500 RPM, 0.8 Lagging power factor at 415 Volts suitable for50 Hz, 3 phase system and for 0.85 load factor and comprising of the following accessories consisting as per details mentioned in Annexure - G to BOQ. NOTE :- (i) Annexure- G to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order.
Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm thick by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:3:6), type C1 using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 3 mm thick duly painted with two coats of synthetic enamel paint with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including RCC pit cover with handle in pre-cast cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) duly reinforced with 8 mm dia tor bar @ 150 mm c/c both ways, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering, in and including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No. 3 connected to earthing test point all as specified and indicated including testing on completion as directed. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
LIGHTING PROTECTION : Aluminium Gutka of 40 mm dia and 50 mm high externally threaded having 20 mm threaed bore at the centre for holding air termination rod to be fixed on GI pipe complete all as specified and directed.
FIRE DETECTION AND ALARM Supply, installation, testing and commissioning of 2 loop Microprocessor based intelligent and modular panel, 100% electronically addressable system where field device addressing is done by panel and not by user, fully touch screen LED panel display, with peer to peer networking of 126 FAP in single node, each panel should act as master panel, single loop with minimum 200 addressable points (detectors + Devices) per loop, panel with built in battery & battery charger that can support backup upto 24 hours idle condition and 30 minutes during alarm condition, panel with integral thermal printer, option to interface to BMS with optional interface of LON Works, BACnet & MODBus, 96 Zonel LEDs on board, capacity to have upto 250 logic zones, 4 NAC circuits, 3 programmable relays, dedicated Alarm relay, Integral short circuit, Event history of 9,999 logs, option to load Logo on the main screen, view live analog level of field devices on the panel screen, option to download these events log and analog level report from panel, 3 detector sensitivity levels, option to change the volume and tone of loop powerred UL listed base sounders from panel, Alarm verifiction option, T1/T2 timer option, field outputs modules programmable with 3 stage program option, have open path programming software, capacity to communicate loop mount reppeater panels, optional NAC power supply units that are loop mountable and 100% supervised from main panel. ULCF 3000 series panel including built in Printer & Network Card. The Neworkable FACP shall be able to accommodate below given detectors & devices as per BOQ and shall have 20% spare capacity to accommodate future expansions of addressable points complete all as specified and directed. Makes : Siemens, Notifier, Bosch
Supply , installation, testing and commissioning of Networkable repeater panel with full touch screen LED technology, upto 126 repeaters panel can be connected to the network, panel should have full touch screen LED's like Power on, Alarm, General trouble, General Supervisory, Power trouble, system trouble, test NAC troule, multi language, panel with built in battery & battery charger that can support backup upto 24 hours idle condition and 30 minutes during alarm condition., Ingress protection of IP40. ULCTPR3000 series complete all as specified and directed. Makes : Siemens, Notifier, Bosch.
Supply, installation, testing and commissioning of addressable 2 wire optical Multisensor (smoke cum heat) detector with built-in short circuit isolator, 100% soft addressing, single LED that covers 360° F light pipe technology with intensity that can handle upto 5000 Lux, discreet design for incorporation into any decor common mounting base, drift compensation, detector sensitivity of 2.25 + 0.33% /ft, chamber monotoring by panel, option to connect remote indicator,complete all as specified and directed. Makes : Siemens, Notifier, Bosch
Supply and installation, testing and commissioning of intelligent addressable manual call point with inbuilt turbo Isolator suitable for flush or surface mounting, call point shall include test key feature without removing the glass. Also should have protection category of IP44 and extra acceesories as required, duly approved by EN54/LPCB/VDS/FM complete all as specified and directed Make : SIEMENS/NOTIFIER/BOSCH
Supply, installation, testing and commissioning of addressable sounder cum strobe, with operation 12/24 V DC 15/1575/30/75/95/110/135/185 cd, 90/95/99dB(A), operating temperature 0 degree to 49 degree C, with minimum 90 dB & maximum out of 99 dB with built in short circuit isolators, HSR series, complete all as specified and directed. Makes : Siemens, Notifier , Bosch.
Supply, installation, testing and commissioning of addressable 2 wire monitor module,100% soft addressed from panel, with built in short circuit isolator, capable of monitoring NO contacts, Option to choose operation mode as supervision of 20 Sec or activation immediatee to connect NO/NC contacts such as pressure switch, flow switches, fire pump contcts etc complete all as specified and directed. Makes : Siemens, Notifier , Bosch.
Supply, installation, testing and commissioning of addressable 2 wire control module, 100% soft addressed, with built in short circuit isolator, SPDT relay contact to drive sounders load upto 1 Amps at 30 VDC temperature, Non latching changeover relay contacts, optional module for output control, Usage like shutting down AHU's and magnetic fire door holder, Elevator recall, fire damper pressurization fan, speaker, strobes etc complete all as specified and directed. Make : siemens, Notifier, Bosch Note : Make of srl item No. 16.00,16.01 to16.07 must be same for better commpatibility.
Suply and installation, testing and commissioning of 2C x 1.5 Sqmm twisted pair copper cable ISI marked with proper clamping, supports and terminations complete all as specifieds and directed. Make : Polycab, RR Cable, Varsha
Supply and installation, testing and commissioning of 1100 Volts grade 8C X1.5 Sqmm copper cable ISI marked with proper clamping, supports and terminations complete all as specified and directed. Make: Polycab, RR, Cable, Varsha.
FIRE FIGHTING AND FIRE SPRINKLAR Supply, installation, testing & commissioning of multi stage Electric Motor driven Jockey Fire Pump of capacity 180 LPM at 70 Mtrs head speed of 2900 RPM suitable for automatic operation, high efficiency with bronze impeller, TEFC motor, with MS Heavy duty pipe of 80 mm dia suction pipe, foot valve, MS Heavy duty pipe of 80 mm dia delivery pipe with NRV and butterfly valve, common base frame, foundtion bolts etc complete as specified along with electrical/Control panels, power and provision of control cabling suitable rated/size, cable trays and all acccessories as specified and as shown on drawings and complying to specifications, drawings, relevant standards and authority regulations complete all as specified and directed.
Supply, installation, testing & commissioning of Horizontal mounted end suction/spit casing electric Motor driven Pump of capacity 2280 LPM at 70 Mtrs head with synchronous speed of 1500 RPM suitable for automatic operation, high efficiency with bronze impeller, TEFC motor, with ERW pipe Class C of 150 mm dia suction pipe, foot valve, ERW pipe Class C 150 mm dia delevery pipe with NRV and butterfly valve, common base frame, foundtion bolts etc complete as specified along with electrical/Control panels, power and control cabling, cable trays, and all acccessories as specified and as shown on drawings and complying to specifications, drawings, relevant standards and authority regulations complete all as specified and directed. Note: Total 03 Fire fighting pumps have been catered for in which 02 No pumps are for Fire fighting ( Main fire pump 01 No & Stand by fire Pump 01 No) and 01 No for Fire Fighting Sprinkling System.
Supply, installation, testing & commissioning of Horizontal mounted end suction/Spit Casing Electric Motor driven Terrace fire Pump of capacity 450 LPM at 35 Mtrs head with speed of 2900 RPM suitable for automatic operation, high efficiency with bronze impeller, TEFC motor, with MS Heavy duty pipe of 80 mm dia suction pipe, MS heavy duty pipe 80 mm dia delevery pipe with NRV and butterfly valve, common base frame, foundtion bolts etc complete as specified along with electrical control panels, power and control cabling, cable trays, and all acccessories as specified and as shown on drawings and complying to specifications, drawings, relevant standards and authority regulations complete all as specified and directed. Note: Rate for item No 16.12 to 16.14 are inclussive of following :- (a) Supplying, installing, testing and commissioning of pressure gauge of suitable range for pump sets and fittings like unions/colours/reducess etc (b) Supplying, installing, testing and commissioning of pressure switchs suitable for automatic operation pressure sets.
Supplying, installation, testing and commissioning outdoor cubical feeder pillar box suitable for 3 phase ,4 wire,415 volts,50 Hz and CPRI approved for 50kA/35 MVA rupturing capacity at 415 volts factory made in an approved factory having seven tank treatment process for powder coating provided with suitable gasket to make it dust/vermin proof & general construction confirming to IS:8623/93 including suitable automatic power factor corrector system and comprising of the following accessories consisting as per details mentioned in Annexure - H to BOQ. NOTE :- (i) Annexure- H to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order.
Supplying, fixing, testing and commissioning of M.S. header made out of Heavy duty ERW pipe of size 450 mm dia with end plates of 5 mtrs length with inlet connection 150 mm dia-03 Nos, 80 mm dia-01 No, connection with air cushion Tank with suitable size of heavy duty pipe and outlet connection 150 mm dia - 2 nos, 100 mm dia 3 Nos on PCC pillers complete all as specified and directed.
Air Vessel 3 Cum capacity having 1320 mm O.DX2m cylindrical height, made out of 12 mm thick Dish end and 10 mm thick Shell of IS :2062 Gr-A/B having dish end welded with shell manufacturing as per design code IS :2825, class II suitable for working pressure 7 Kg/cm², Hydrotested at 21 Kg/cm², joint efficiency 0.85, Radiography lognitudinal seam 100%, Circumferential seam 10% spot with all necessary valves & fitting & complete all as specified and directed.
Supplying, laying, jointing and commissioning of M.S. "C" class pipe of size 150 mm dia conforming to IS : 1239 with all acccessories like all fittings (standard MS fittings with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, floor/wall/ceiling with clamps, hangers, angles, channels (using anchor fastners) as per specifiecation complete with two or more coats of synthetic enamel paint of approved make/shade over one coat primer complete as per specifiection complete. All hangers, clamps, brackets etc. shall be of galvenized iron, welding of any kind on the galvenised support/hanger not be permitted complete all as specified and directed.
Supplying, laying, jointing and commissioning of M.S. "C" class pipe of size 100 mm dia (for wet riser) conforming to IS : 1239 with all acccessories like all fittings (standard MS fittings with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, floor/wall/ceiling with clamps, hangers, angles, channels (using anchor fastners) as per specifiecation complete with two or more coats of synthetic enamel paint of approved make/shade over one coat primer complete as per specifiection complete. All hangers, clamps, brackets etc. shall be of galvenized iron, ewlding of any kind on the galvenised support/hanger not be permitted complete all as specified and directed.
Supplying, laying, jointing and commissioning of M.S. "C" class pipe of size 100 mm dia ( for Wet riser) conforming to IS : 1239 with all acccessories like all fittings (standard MS fittings with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe on floor, wall/wall/ceiling with clamps, hangers, angles laid in trenches/through hume pipe as per specifiecation complete with two or more coats of synthetic enamel paint of approved make/shade over one coat primer complete as per specifiection complete. All hangers, clamps, brackets etc. shall be of galvenized iron, welding of any kind on the galvenised support/hanger not be permitted complete all as specified and directed.
Supply,installation testing and commissioning of Yard Hydrants comprising of 100 mm dia MS pipe heavy duty (1 mtr above ground) including connection from under ground pipe of 150 mm dia fitted with single headed 63 mm dia landing valve, 2 nos 30 mtr long 63 mm dia CP hose with gun metal male and female instantaneous coupling,63 mm dia branch pipe with gun metal hexagonal detachable nozzle made of instantaneous coupling, hose cabinet to accomodate two sets of controled percolating hose of 30 mt length with 1 pair of male & female coupling and 1 branch pipe with nozzle. The cabinat is made of MS Sheet of 16 SWG thick, with a double door, glass front (4 mm thick) with hinged door and lock. The cabinet is painted to scarlet red colour wall and mounted on brick platform of suitable size duly plastered 750 mm above ground level, complete all as specified and directed.
Supplying,installing and commissioning of fire bridge inlet connection confirming to IS 5290 comprising of 04 Nos, 63 mm dia instantaneous coupling complete with CI non return valve, CI butterfly valve, connected to 100 mm dia wet riser pipe complete all as specified and directed.
Supplying,installing, testing and commissioning of MS air cushion tank on top of each riser fabricated from 6 mm thick MS plate, 200 mm in diameter and 1.2 m in height with dished ends fabricated from 8 mm thick MS plate with air release valve with stop cock, flanged inlet connection and drain arrangement with 25 mm dia, valve pressure gauge with gun metal stop cock complete with all accessories as required and confirming to IS 4736-1968 -(Terrace floor) complete all as specified and directed.
Supplying, erecting and commissioning Fire Hose cabinet comprising of internal hydrant of following :-. (a) Supplying and fixing single headed internal hydrant valve with instantaneous gun metal/SS coupling of 63 mm dia with cast iron wheel, ISI marked, confirming to IS 5290 (type-A) with blank Gunmetal cap and chain as required. (Make : NEWTECH/ ARIHANT/ESSEL) (b) Providing and installation of 63 mm dia, 2X15 mtr long rubber lined woven jacketed hose pipe, type-A ( Reinforced rubber lined) of IS 636-1988 complete with necessary instantaneous spring lock type coupling at the ends to match with landing valve/hose pipe/ branch pipe with gunmetal/SS male &female coupling (IS:903 :1993) (Make: PADMINI/ OMEX/ TORRENT) (c) 1 No gun metal branch pipe with nozzle (63 mmx20mm)with Gun metal gate/ ball valve 20 mm (d) Two keys in recess type compartment for break glass (e) Supplying and fixing First-Aid Hose reel with MS construction spray painted in post office Red drum and brackets, confirming to IS 884 with upto date amendments, complete with the following required :- (i) 30 mtr long 20 mm dia(nominal internal) dia water hose (ii) thermoplastic (textile reinforced) type-2 as per IS :12585 (iii) Drum and brackets for fixing the equipments on wall, connection from riser with 25 mm dia stop valve & MS pipe Make :- EVERSAFE/SRI/READE/NEWTECH/MAHAVIR (f) The frame shall comprising of 800 mm widex150 mm deep x1200 mm high made of gauge MS sheet to house the above accessories. The cabinet shall be powder coated both internally and externally. The door shall be provided with suitable locking arrangement as per standers. The qouted rate shall include fixing the cabinet to the wall & making good to the wall complete all as specified and directed.
Supply, fixing, testing and commissioning of Installation Control Valve consisting of 1 No Alarm valve, 1 No Main stop valve, 1 No water meter with alarm gong, Pressure gauge drain valve and drain piping etc, complete all as specified and directed.
Supplying, laying, jointing and commissioning of 20 mm dia sizes of M.S . 'C' class pipes conforming to IS : 1239 with all accessories like all fittings (standard MS fittings with welded joint shall be used on the pipess) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, floor/wall.ceiling with clamps, hangers angles, channels (using anchor fastners) as per specification complete with painting of one coat primer and 2 or more coats of synthetic enamel paint of approved make/shade complete all as specified and directed. Note: All hangers, clamps, brackets etc. shall be of galvenized iron, welding of any kind on the galvenised support/hanger not be permitted.
Supplying, laying, jointing and commissioning of 25 mm dia sizes of M.S . 'C' class pipes conforming to IS : 1239 with all accessories like all fittings (standard MS fittings with welded joint shall be used on the pipess) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, floor/wall.ceiling with clamps, hangers angles, channels (using anchor fastners) as per specification complete with painting of one coat primer and 2 or more coats of synthetic enamel paint of approved make/shade complete all as specified and directed. Note: All hangers, clamps, brackets etc. shall be of galvenized iron, welding of any kind on the galvenised support/hanger not be permitted.
Supplying, laying, jointing and commissioning of 32 mm dia sizes of M.S . 'C' class pipes conforming to IS : 1239 with all accessories like all fittings (standard MS fittings with welded joint shall be used on the pipess) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, floor/wall.ceiling with clamps, hangers angles, channels (using anchor fastners) as per specification complete with painting of one coat primer and 2 or more coats of synthetic enamel paint of approved make/shade complete all as specified and directed. Note: All hangers, clamps, brackets etc. shall be of galvenized iron, welding of any kind on the galvenised support/hanger not be permitted.
Supplying, laying, jointing and commissioning of 40 mm dia sizes of M.S . 'C' class pipes conforming to IS : 1239 with all accessories like all fittings (standard MS fittings with welded joint shall be used on the pipess) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, floor/wall.ceiling with clamps, hangers angles, channels (using anchor fastners) as per specification complete with painting of one coat primer and 2 or more coats of synthetic enamel paint of approved make/shade complete all as specified and directed. Note: All hangers, clamps, brackets etc. shall be of galvenized iron, welding of any kind on the galvenised support/hanger not be permitted.
Supplying, laying, jointing and commissioning of 50 mm dia sizes of M.S . 'C' class pipes conforming to IS : 1239 with all accessories like all fittings (standard MS fittings with welded joint shall be used on the pipess) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, floor/wall.ceiling with clamps, hangers angles, channels (using anchor fastners) as per specification complete with painting of one coat primer and 2 or more coats of synthetic enamel paint of approved make/shade complete all as specified and directed. Note: All hangers, clamps, brackets etc. shall be of galvenized iron, welding of any kind on the galvenised support/hanger not be permitted.
Supplying, laying, jointing and commissioning of 80 mm dia sizes of M.S . 'C' class pipes conforming to IS : 1239 with all accessories like all fittings (standard MS fittings with welded joint shall be used on the pipess) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, floor/wall.ceiling with clamps, hangers angles, channels (using anchor fastners) as per specification complete with painting of one coat primer and 2 or more coats of synthetic enamel paint of approved make/shade complete all as specified and directed. Note: All hangers, clamps, brackets etc. shall be of galvenized iron, welding of any kind on the galvenised support/hanger not be permitted.
Supplying, installing, testing and commissioning of Sprinklar flexible drop connection of length 70 cm and dia 15 mm including fixing arrangement of sprinkler with mounting bracket of false ceiling complete all as specified and directed.
Supplying, installing, testing and commissioning of Standard response pendent Sprinkler quartzoid bulb type with 15 mm screwed end connection of 68° C temperature rating, K 80 and orifice shall not be less than 3 mm complete all as specified and directed. Make: Tyco, Senju, Victaulic
Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm thick by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4), type B1 using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 3 mm thick duly painted with two coats of synthetic enamel paint with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including RCC pit cover with handle in pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) duly reinforced with 8 mm dia tor bar @ 80 mm c/c both ways, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering, in and including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No. 3 connected to earthing test point all as specified and indicated including testing on completion as directed. Note :- (a) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (b) Quantity of earthing of following part (i) Internal Electrification-13 Sets (ii)External Electrification -14 sets (iii) External Water supply-6 sets (iv) Lightning Protection - 8 sets (v) Fire fighting - 2 sets
Supply, laying, jointing and commissioning of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 240 Sqmm 3.5 core complete all as specified and directed.
Supply, laying, jointing and commissioning of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed.
Submain wiring with four single core 6 sqmm FRLS copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including two 6 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note:- Four single core 6 sqmm copper conductor, one run PVC conduit and two run of 6 sqmm earth wire shall be considered & measured as one unit.
MCCB four pole 100 Amp, 415 volt, 16 kA, ICU=ICS=100% complete all as specified and directed.
MCB triple pole and neutral, 32 Amp, 415 volt, 10 kA, complete all as specified and directed.
Sheet metal enclosures with socket plug top and MCB s triple pole and earth enclosure with a four pin and earth plug with socket complete with one triple pole MCB 32 Amp 415 volt complete all as specifed and directed.
Sheet metal enclosure MCCB TPN DB double door ISI marked, IP -54 complete with 250 amps rated copper busbar and suitable for MCCB incommer up to 160 Amps including all accessories and mounting arrangment on wall complete all as specifed and directed.
EOT CRANE AND HOIST Designing, supplying, installing, testing and commissioning of 5 ton capacity EOT crane double girder/ square bar Pendant Operated from F/L, indoor type class II as per IS:3177,IS:807,IS:2266, IS: 13834 (Part –I) & (Part-5), ISO : 12488-1 and other relevant IS codes for 14 mtr span and hook height 7.00 mtr, for hanger cum packing room (dimension of building is 41.3 X 15 X 10.8 M, actual dimension of crane may vary according to bldg. Refer drawing for installation details) including gantry rails and stoppers at both ends of cross and longitudinal travel and four wire bus bar including access ladder two Nos, maintenance platform of suitable size, electric wiring on proper insulator and brackets conforming to BIS with down leads for control of easy operation from floor level including Electrical panel all as per details shown in drawings and mentioned in Annexure 'I' uploaded separately with tender documents. Note :- Annexure 'I' to BOQ has been uploaded separately alongwith the tender documents and is part of BOQ for all purpose.
Designing, supplying, installing, testing and commissioning of 5 ton capacity EOT crane double girder/square bar pendent operated F/L, indoor type, type class II as per IS:3177,IS:807,IS:2266, IS: 13834 (Part –I) & (Part-5), ISO : 12488-1 and other relevant IS codes for 20 mtr span and hook height 7.00 m for bulk storage shed (dimension of building is 41.3 X 15 X 10.8 M, actual dimension of crane may vary according to bldg. Refer drawing for installation details) including gantry rails and stoppers at both ends of cross and longitudinal travel and four wire bus bar including access ladder two Nos, maintenance platform of suitable size, electric wiring on proper insulator and brackets conforming to BIS with down leads for control of easy operation from floor level including Electrical panel all as per details shown in drawings and mentioned in Annexure 'J' uploaded separately with tender documents. Note :- Annexure 'J' to BOQ has been uploaded separately alongwith the tender documents and is part of BOQ for all purpose.
Designing, supplying, installing, testing and commissioning of 10 ton capacity EOT crane double girder/square bar pendent operated F/L, indoor type, type class II, Pendant Operated from F/L as per IS:3177,IS:807,IS:2266, IS: 13834 (Part –I) & (Part-5), ISO : 12488-1 and other relevant IS codes for 14 mtr span and hook height 7.00 mtr , for hanger cum packing room (dimension of building is 41.3 X 15 X 10.8 M, actual dimension of crane may vary according to bldg. Refer drawing for installation details) including gantry rails and stoppers and dampers at both ends of cross and longitudinal travel and four wire bus bar including access ladder two Nos, maintenance platform of suitable size, electric wiring on proper insulator and brackets conforming to BIS with down leads for control of easy operation from floor level including Electrical panel all as per details shown in drawings and mentioned in Annexure 'K' uploaded separately with tender documents. Note :- Annexure 'K' to BOQ has been uploaded separately alongwith the tender documents and is part of BOQ for all purpose.
Designing, supplying, installing, testing and commissioning of indoor type hook mounted SE series pendant type electrically operated chain type duty class II Hoist for 27 mtr lift height with three phase 415 Volts, 3Ø + 10% 50c/s AC and following capacity conforming to IS: 3938 and IS:807 including all latest amendments. (a) 0.5 Ton – 15 No (lifting speed 6.8mtr/min) (b) 1.0 Ton – 15 No (lifting speed 7.2mtr/min) including Consolidated control logic & control panel , wiring, cabling for above mentioned 30 Nos hoists (15x 0.5 Ton,15 x 1.0 Ton) all as per details shown in drawings and mentioned in Annexure 'L' uploaded separately with tender documents. Note :- Annexure 'L' to BOQ has been uploaded separately alongwith the tender documents and is part of BOQ for all purpose.
M/s Arihant Builders
RAMJI DAS DHAL CONSTRUCTION PVT LTD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid