C/O 20 Nos. Tubewells in Doon area of Solan District in Tehsil Baddi District Solan (HP)

Amount

Providing and laying cementconcrete 1:2:4 (1 cement : 2 sand :4 graded stone aggregate 20mm nominal size) reinforced concrete chajjas not exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 Sand) to give a smooth and even surface centring/form work and curing complete excluding the cost of reinforcement.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/ panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partions frames.

For doors windows and ventilatiors and glazed partions frames.

For shutters of doors windows & ventilators including providing and fixing hinges/pivotsand making provisions for fixing of fitting where ever required including thecost of PVC/neoprene gaskets as required (fittingsandglazing / panelling shall be paid for separately.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/ neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In charge (cost of aluminium snap beading shall be paid in basic item.) Glazing with glass panes of 5.50 mm thickness (weight not less than 13.75 kg/ sqm.

Prelaminated board bwp phenol bonded exterior/interion grade HDMR both sides. 12mm thick

Providing and fixing stainless steel jali for window

Providing and fixing 12 mm thick double charge water proof stain and impect resistent heavy duty vetrified tiles Nitco/ Kajaria/ Johnson/ Somany/ or equivalant 600 x 600mm x 10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

20 mm cement plaster in single coat in rough side of brick/stone masonery for interior plastering upto floor two level including arrises,internal,founded angles,chamfers and/or rounded angles chamfers and/or rounded angles not exceeding in girth & finished even and smooth in cement mortar 1:5(1cement:5sand).

15 mm cement plaster in single coat in rough side of brick/stone masonery for interior plastering upto floor two level including arrises,internal,founded angles,chamfers and/or rounded angles chamfers and/or rounded angles not exceeding in girth & finished even and smooth in cement mortar 1:5(1cement:5sand).

P/F on wall face PVC rain water pipe i/c fitting and complete in all respect.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete i/c carriage of material in all leads and lifts.

100 mm Bend

100 mm Shoe

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete.

Applying crylicWashable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth complete.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded poly ethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bomboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gm/m²

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m²

P/F PVC water storage tank of ISI 12701 marked, GI inlet and out let connection 15 mm nominal bore ball valve and mosquito proof pvc cover with locking arrangment including hoisting upto all heights above ground level of 1000 litre capacity

P/F vitreous china wash down water closet squatting pan with high flow cistern (Indian/ European Type WC pan) size 580 mm Jaquar company complete in all respect (Earth work, bed concrete, foot rest and tap should be measured and paid for seprately (Orissa Pattern)

P/F vitreous china wash wash basin mixture basin with center hole Jaquar company complete in all respect (Earth work, bed concrete, foot rest and tap should be measured and paid for seprately (Orissa Pattern).

P/F viterious china ware urinal port including PVS connection sencsor and all other accessories complete in all respect.

P/F PVC "P" or "S" trap for water closet (squatting pan) ISI marked i/c joiting the trap with the pan and PVC pipe with approved adhesive etc. complete. 110 mm dia.

P/F CP brass bib tap (Jaquar or heavy type) of 15 mm dia.

P/F to wall ceiling and floor galanised mild steel tubes of (Heavy Grade) tube fittings and clamps i/c making good the wall ceiling and floor. 15 mm dia

Wiring for light point/ fan point/ exhaust fan point call bell with 1.5 sq.mm PVC insulated PVC heat resistant flame retradant (HRFR) and low smoke single core flexible copper conductor cable in surface PVC conduit and moduler switches moduler plate suitable GI box and earthing the light with 1.5 sq m.m. HRERL/PVC insulated single core copper conductor cable as required. Category-C

Supplying and Fixing 15/16 amps one way Modular Switch .

Supplying and Fixing 6 pin 15/16 amps one way Modular Socket Out let .

Wiring for circuit / sub-mainlight plug with 2X1.5 mm Sq PVC insulated haet resistant retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 1 No. 1.5 Sq mm HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x1.5 sq.mm

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x4.0 sq.mm

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x6.0 sq.mm

Supplying and fixing GI Modular boxes of following sizes along with modular base and cover plate for modular base and covwer plate for modular switches in recess as required

2 modules (78 mm X78mm X 50 mm )

4 modules (140 mm X78mm X 50 mm )

6modules (205 mm X78mm X 50 mm )

8 modules (120 mm X135mm X 60 mm )

12 modules (205mmx135mmx60mm

Supplying and fixing of following way, tripple pole and neutral sheet steel MCB distribution board, 240 415 volts, on surface / recess, complete with tinned copper bus-bar, wire set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing

Supplying and fixing 8 Amp to 63 Amp rating 240 volts (a) series miniature circuit breaker of following poles in the existing MCBDB completed with connections testing and commissioning etc. as required category-A.

P/F LED lamps 18 watt

Providing and installed testing commissoining of celling fan of Bajaj/Crompton/Anchor make complete with regulator , including wiring the down rods of standered length with 16/2.0mm twin twistwd fixing phenolic laminated sheet cover on the fan box etc. Celling fan 1400mm sweep category - A

P/F fan Regulator of ISI make

Providing and Fixing following surface mouting T5 luminaries with powder coated CRCA sheet housing mirror optics reflector electrinic ballast decorative end caps suitable for 28 watt FTL(T5) , complete with all accessories, connection testing and commissioning etc.

1X 28 watt FTL(T5) cat -A

Earthing with GI earthing 4.5mtr longx40mm dia including accessories and providing masonry and sure with copper plate having locking arrangement and watering pipe etc. (but without charcoal or coke and Salt) complete as required.

Providing and fixing 6 SWG dia GI wire on surface or incess for loop earthing as required.

supply /fixing bakalite batten/angle holder including connections etc. as required.

Providing / Installing of Exhaust fan of following size in the esting opening , including making the hole to suit the size of all above fan. Maing good the damages, connection ,testing and commissioning etc as required.

300 mm sweep

Providing and fixing " LED" street lights of reputed make ( Bajaj/ Havells/Pyramid) single piece pressure die cast housing with epoxy power coated dark graphite gray colour finish prismetic poly carbonate cover with individual LED Lense with all accessories including cost of lamp ISI mark 24 Watt LED make complete with all accessories and ballast i.e 15/16 amp. switch & socket with board copper wire 8 SWG (4mm dia) Bracket and suitable angle clamps fixing and other fitting etc. complete in all respect in all leads, lifts and carriage of material and as per direction of the Engineer in charge.

P/F call bell of ISI standered complete with copper cable and bell switch.

Supplying and fixing of following way, tripple pole and neutral sheet steel MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus-bar, wire set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc as required .

Double door 2 + 8 way

J.K. ENTERPRISES

Vivek Thakur

SHYAM LAL