Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.1 LAccepted-AOC 0 KALIKAPUR KALIKA PUR CHAMPAHATI SOUTH 24 PARGANAS WEST BENGAL 743330 | 24 PARAGANAS SOUTH | WEST BENGAL | 743330 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹47.9 L+₹1.4 L (2.99%)Rejected-Finance 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹48.3 L+₹1.7 L (3.73%)Rejected-Finance BHANGARMATH THAKURANICHAWK PO SAMABAYPALLY BALLY HOWRAH 711205 | HOWRAH | HOWRAH | WEST BENGAL | 711205 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹49.0 L+₹2.5 L (5.38%)Rejected-Finance 52A 1A NAZIR LANE KIDDERPORE KOLKATA 700023 | KOLKATA | KOLKATA | WEST BENGAL | 700023 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹49.2 L+₹2.7 L (5.70%)Rejected-Finance 165 UTTAR KASTODANGA ROAD KOLKATA 700 061 | KOLKATA | KOLKATA | WEST BENGAL | 700061 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
8 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
SPL REPAIR TO BLDG NO C-6 (SINGLE OFFRS ACCN) AT ECOM INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA
2024_MES_642925_1
8223/E8
Open Tender
Civil Works
Item Rate
180 days
GE (FW) Kolkata
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹84,000
21 Mar 2024
17 Feb 2024
9 Mar 2024
17 Feb 2024
8 Mar 2024
1 Mar 2024
Amount
Chipping of existing plaster manually from masonary or concrete surface using chisel and hammer and disposal of debris out of MOD land and depositing where directed at a level n'exc 1.5m above the starting point complete all as specified and as directed by Engr-in-Charge ( upto 4 storey of building)
Chipping of unsound /weak concrete materials from slabs , beams, columns ,lintel, chajja, fin , facia etc. by any means as directed by engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign materials , loose concrete/aggregate etc and disposal of all debris out of MOD land and complete all as specified and as directed by Engr-in-Charge ( upto 4 storey of building) upto 30mm average thickness for slabs/Chajja
Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25mm (but not less than 15mm clear air gap)by manual methods (using wire brushing ,chiselling etc) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcing bars by emery paper and cleaning the area thoroughly by water and allow it to dry all as per manufacturers instruction to give it a totally rust free finished steel surface complete all as specified and directed by Engr-in-charge upto 12 mm dia bar ( upto 4 storey of building)
M & L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed by Engr-in-charge upto 4 storey
Supply and application of Epoxy Zinc rich primer on the prepared steel surface by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed by Engr-in-charge. Make ; SIKA/FOSROC upto 4 storey High.
M & L for introducing new reinforcement bars for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified and directed by Engr-in-charge. upto 12 mm dia bar upto 4 storey High.
M & L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, column, slab etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minimum tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as spd and dir by Engr-in-charge.( Make: SIKA/FOSROC/ELANTAS BECK/KUNAL CONCHEM) 50 mm average thickness of Beam and Slab
M & L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, column etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minimum tensile strength 5 N/mm2 @ 28 days, minimium flextural strength 5 N/mm2 @ 28days and complete all as spd and dir by Engr-in-charge.( Make: SIKA/FOSROC/ELANTAS BECK/KUNAL CONCHEM) Add or deduct for every 10 mm thickness extra,
Supply, mixing and application two component structural grade polymer modified reinstatement morter, where local spelling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as spd and directed by the Engr-in-charge upto 25 mm average thickness and upto 4 storey High. Make :- Sika/Fosroc NOTE:- Cement and sand morter in proportion of 1:2 graded coarse sand ) with polymer admixed in proportions approved by Engr-in-charge)
M & L for applying curing compound over concrete surfaces as per manufactures instruction complete all as spd and dir by Engr-in-charge upto 4 storey high. Make :- Sika/Fosroc
Supply and Application Cementitious Grouting Admixture with the Cement slurry at a dosage 225 ml per bag of cement and injecting with high pressure by a Pressure grouting Pump through non return PVC nozzles Prefix with rapid setting cementitious Plugging Mortar to fill all possible pores and gaps left within the old concrete mass. When the flow of grout stops or shows refusal or grout flows out from the adjacent nozzle, pumping to be stopped and the nozzle to be tied up and allowed to set for 24 hours. The PVC nozzles to be sealed off with quick-setting cementitious plugging mortar. Grouting operation to be carried out through next nozzle till the entire area is covered. The grouting holes to be finished by removing the protruded portion of nozzles and finishing flush with the surface complete all as specified and as directed by the Engr-in-Charge.. (upto 4 storey of building) ( Make :- Fosroc/Elantas beck/Kunal conchem).
Supply and applying two coats of High performance elastomeric cementitious waterproof coating sandwiched with 45 GSM glass fibre reinforcement on the entire floor and 1.0 m of all walls of all toilets as per following methodology:- Cleaning of exposed concrete surface by mechanical means or by hydro blasting to remove laitance, loose particles, contamination etc. which may hinder bonding. Coving of RCC joints with PCC (1:1.5:3) mixed with Integral Water Proofing compound. Applying one coat of Waterproofing membrane to concrete surfaces followed by application of 45GSM glass fibre on the wet surface. Applying second coat of waterproofing membrane at the right angles to the direction of first coat. Second coat shall be applied after the first coat gets dry. Sprinkling fine aggregate immediately after the application of second coat to get the mechanical key for protective plaster. Curing to Water proofing membrane to be carried out for minimum period of 3 days with ponding complete. The Water Proofing Product Should have Mixed density: 1.68g/cc (brushable consistency). Adhesion to concrete : >1N/mm2. Static crack accommodation: 1mm.( Fosroc/Elantas beck/Kunal conchem) (upto 04 storey high building) ( Make :- Fosroc/Elantas beck/Kunal conchem)
Bore packing of all the Spouts to be done with grouting admixture mixes with Cement Concrete / Mortar @225 ml per bag of Cement. (upto 04 storey high building) ( Make :- Fosroc/Elantas beck/Kunal conchem)
Demolition of RCC of any description and in any position not otherwise specifically provided for .
Use and waste of formwork to sides and soffit of beams, lintels, cantilevers, shelves etc for rough finished surface complete all as specified and as directed by the Engr-in-Charge. (upto 04 storey high of building)
M&L for RCC for nominal mix (1:1/2:3) using 20 mm graded crushed stone aggregate as in chajjas, kitchen shelves and similar work all as specified and directed (upto 04 storey high building).
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (upto 04 storey High of building)
S&F TMT bars 8 mm dia and over as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .(upto 04 storey High of building)
Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.
Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete.(upto 04 storey High of building)
M&L for Rendering 10 mm thick in CM (1:6) on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building)
M&L for Rendering 15 mm thick in two layers (Top 5 mm thick rendering coat mixed with water proofing compound shall be laid over 10mm thcik plastered surface) with CM (1:4) on of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.. .(upto 04 storey High of building) Note: WPC shall be measured and paid separately.
M&L for Rendering 5mm thick with CM (1:3) on or concrete surfaces and finished the surface even and smooth as in ceiling complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building)
M/L preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building)
M/L preparation of old surface and applying one coats of white wash on ceiling to match with the new one complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building)
M&L for preparation of new plastered surfaces of wall and applying two coat of acrylic distemper (oil bound distemper) over a coat of alkali registrant primer with 3mm thick wall care putty. complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building).
M/L preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of alkali registrant primer and one coat of wall putty (2 mm thick) to match with the new surface on wall. complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building).
Supply only Integral water proofing compound (ISI Mark) @ 3% of cement. ( Fosroc/Elantas beck/Kunal conchem) .(upto 04 storey High of building)
Dismantling of floor hearth or wall tiling incl cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building)
M & L for colour Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm backing coat in CM 1:4 etc complete all as spd and as directed.
M & L for light shade Verified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and as directed .
S&F Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed.
M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 20mm thick cement mortar bedding (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. (upto 04 storey High of building)
Taking up or down steel tubing with connections for cleaning for refixing or removing or store yard complete of bore 15mm. complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing with connections for cleaning for refixing or removing or store yard complete of bore 20mm. complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing with connections for cleaning for refixing or removing or store yard complete of bore 25mm. complete all as specified and directed .
S&F Steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, complete all as specified and directed.
S&F Steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20mm, complete all as specified and directed by Engineer-in-Charge.
S&F Steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 25mm, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engineer-in-Charge.(upto 04 storey High of building)
S&F 15mm bore Brass CP bibcock fancy type with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge.(upto 04 storey High of building)
S&F in Repair 15mm bore Brass CP stopcock fancy type, with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge.(upto 04 storey High of building)
S&F 15mm bore Brass CP angular stopcock concealed type with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge.(upto 04 storey High of building)
S&F PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and as directed by Engineer-in-Charge.(upto 04 storey High of building)
S&F in repair brass CP Shower roses with or without swivel joints, 125mm size, including fixing to steel pipes or union complete all as specified and as directed by Engineer-in-Charge.(upto 04 storey High of building)
S&F in repair floor mounted vitreous china, white, wash down water closet pan (pedestal pattern) with "P" or "S" trap, front or back inlet fixing bolts with and including 10 litre capacity symphonic action type low level PVC flushing cistern matching with water closet colour with inlet ball valve float handle fixed with cast iron bracket of suitable size) and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cove (white) fixed with mild steel chromium plated or aluminum hinging device, in proper position including making all necessary connections with flushing cistern, flush pipe, anti syphonage pipe etc complete all as specified and directed. (Make of EWC : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK / ASIAN PAINTS, Model: TREND) (Make of Cistern : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model: Corona /ASIAN PAINTS, Model: TREND)
S&F double action floor door spring hydraulically regulated made up of minimum alloy steel foundation box main body with stainless steel cover governing pirot made of brass other part of MS heavy duty and fixed as directed by the Engr-in-charge.
S&F in repairs Vitreous china wash hand basin white ,flat back of size 550x400mm with pedestal including PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends, pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length , CP waste coupling 32 mm dia of half or full threaded, chromium plated fancy type angle valve 15 mm dia bore, and taking down unserviceable wash hand basin complete all as specified and directed by Engr-in-charge.
S&F in repairs towel rack (premium range) with lower hangar with hook complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12/HINDWARE, Cat No: F890012)
S&F in repair sheet glass shelf assembly consisting of sheet glass shelf with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. (MAKE: HINDWARE, Cat No: F880010 / JAQUAR, Cat No: ACN-1171N / PARRYWARE, Cat No: T6009A1 / PRAYAG, Cat No: BEA-51 / CERA, Cat No: F5001114)
S&F in repairs Acrylic corner shelf of size 300 mm complete all as directed.
S&F Chromium plated brass central hole basin mixer with pop-up- waste system with 450 mm long copper pipe and brass nut etc fixed with 15 mm bore iron pipe as in repair etc complete as specified and as directed. Make- Jaquar Cat no-KUP-35011BPM and equivalent brand.
S&F in repair 15mm bore two in one bib cock with wall flange chromium plated (Premium range)(Make : Jaquar cat no- FLR-CHR-5041N and equivalent brand(Chrome) all as specified.
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : ESSCO, Cat No : ALE-ESS-583/ JAQUAR, Cat No: PRS-031/ CERA, Cat No: F8030401AB / ASIAN PAINTS, Cat No: C-232N / HINDWARE, Cat No: F160013 / PARRYWARE, Cat No: E8352A1)
S&F in repair fancy type CP wall mixer 3 in-1 with provision for over head shower & telephonic shower arrangement screwed for iron pipe including taking down old and all as specified.(Make : Jaquar Cat No. KUP-35125PM and equivalent brand (chrome) all as specified.
Taking down/removing of existing water proofing treatment on roof surfaces and wall surfaces complete, including screed bed, racking out joints, hacking for key scrubbing down with water etc including dismantling of lightening strip if any and refixing the same in position, and removing rubbish out of MD land, all as specified.
M & L PCC type B0 (1:2:4) (using 12.5 mm graded stone aggregate) thickness as required at site) for padding concrete as on roof, all as specified and directed.
M & L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed (Water proofing compound shall be measured and paid separately).
M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :- (a) Rendering 10mm thick in Cement Mortar 1:4, finished even and smooth and cured for 07 days by Ponding of water over Roof. (b) Preparing fully dried plastered surface as per IS:3067-1966, for further treatment. (c) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.3 Litre per Sqm. (d) Applying a layer of APP based Polymeric Membranes; 3.0mm thick (minimum) weighing 3.50 Kilogram per Square Metre (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. (e) Applying one coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane.
M&L for preparation and applying solar reflective bituminous aluminum paint exceeding 10 cm in width or girth over APP membrane @ 0.20 kg/sqm complete all as specified.
S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by engineer-in-charge.. (upto 04 storey High of building).
S&F 40mm bore UPVC pipe with fittings complete fixed in wall/laid in floor complete all as specified and as directed by engineer-in-charge.. (upto 04 storey High of building).
S&F in repair powder coated anodised aluminium doors frame for doors, windows, ventilators and partition with one or more rebates including joining cleat, neoprene rubber etc for fixing etc complete all as specified.
S&F in repair anodised Powder Coated aluminium Shutter (Size 41mmx20mm 1.60mm railing size 20mm) @0.50Kg/Rm for doors, windows, ventilators with one or more rebates including joining cleat , neoprene rubber etc for fixing for fixing etc. complete all as specified
S&F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square in pane complete all as specified and directed..
M&L False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and applying two coats of oil bound distemper over a coat of primer on exposed surfaces including dismantling of existing ceiling complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)
Demolition of brick work built in cement mortar including all quoins arches pillars etc but excluding ashlars facing, dressed stone work and precast concrete articles complete all as directed.
M&L brick work with Fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6.complete all as specified and as directed.
S&F in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate). .complete all as specified and as directed by Engineer-in-charge.. (upto 04 storey High of building).
S&F PTMT grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed by Engineer-in-charge.. (upto 04 storey High of building).
S&F PTMT tubular towel rail 450mm long, with and including CP brass screws and wooden/plastic cleats, weight not less than 170 gms complete, fixed in wall complete all as specified and as directed by Engineer-in-charge.. (upto 04 storey High of building)
Dismantling Structural Steel Work including Doors, Gates but excluding Framed Truss etc. complete all as specified and as directed.
Supplying and fixing Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)
Dismantling cast iron or re-inforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)
S&F sand cast pipes with out ears in any length fixed to wall with brackets of 100mm bore including bitumimous paints both side complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)
S&F CI bend, diminishing piece with door of 100mm bore with duct, foot and heel rest complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)
S&F CI branch pieces single equal or unequal with door of 100mm bore complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)
S/F CI cowl of 100mm bore complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)
Taking down soil pipe/ rainwater pipes (any size or pattern ) including all fittings heads shoes bends swan -necks etc including cleaning or refixing or removal to store (measured over all fixed along the centre line over fitting and ( accessories)
S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)
S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)
Material & labour preparation of old painted steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)
M & L for Cup-boards shutters made with 19mm thick exterior grade prelaminated particle board with decorative lamination on one side and other side balancing white lamination medium density, interior grade including 6mm teakwood lipping all as directed at any storey of building
S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm at any storey of building
S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised at any storey of building complete all as specified and as directed by the Engr-in-Charge
S & F Aluminium Anodised Hasp and Staple, including bolt to hing plate and fixed with screws 100 mm size at any storey of building complete all as specified and directed.
S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair 20 mm dia brass CP curtain rod heavy duty fancy type including taking down old one all as specified and directed.
S&F in repair brass CP brackets for curtain rods heavy duty and all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass of size 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed .
S&F PVC soap tray with PTMT fixed to walls with screws complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crack fill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
S & F rotational moulded polythene water storage tanks, multi layered 2000 ltrs capacity(cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling old unserviceable one and removing out side of premises complete all as specified .
S & F 20 mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(minimum weight 15 mm - 210 gms) incl taking down old one complete all as specified and directed height up to 12 storey all as specified and directed.
Up rooting of tree from walls of bldgs up to extranded root and spraying of acid of required quantity complete from any location of Bldg up to 4 storied and making good disturbed surfaces with cement mortar (1:4) or cement concrete type C1(1:3:6) using 20mm graded aggregate including necessary scaffolding complete for tree of girth up to 5 to 10 CM all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 15 mm thick cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for grinding/polishing and cutting to existing stone floor of any description (such as kota stone, marble stone, terrazo surfaces etc) cleaning with water and applying zinc oxide powder to achieve high gloss finish complete all as specified and as directed. (NOTE: This item shall only be executed for old existing stone surfaces)
S&F for Steel work in tubular trusses in roof trusses (framed), trussed, posts purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed
S&F for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.
S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed
S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed
S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and directed
S&F for 1.25mm thick plain, black, mild steel sheeting, in doors, valley gutters, drip and straight flashings (length and girth as fixed) in provided to welding complete all as specified and directed.
M&L for new steel and iron surfaces apply two coats of synthetic enamel paint over one coat of red oxide of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.
S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
M&L for providing precast cement concrete 1:2:4 type B1 20mm graded aggregate as in landings, cover slab, chullah hoods, chajjas, water troughs, mangers, shelves, and similar articles with plain faces including chamfers, weathering's, throating etc and set in cement mortar 1:6 complete with joints to match except blocks or slabs, complete all as specified and directed.
Supply and fixing 20mm thick pre-polished decorative cement concrete / endura tiles of size 300mm x 300mm, as in flooring over and including 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, complete all as specified and as directed.
S&F Wire netting of galvanised steel wire 0.91mm dia fixed with tinned tacks of wire staples , size of mesh will 20 mm under plaster surface complete all as specified and directed .
M&L PCC 1:3:6 type C2(Using 40 mm graded aggregate) in Foundation, filling and mass concrete complete all as specified and directed.
S & F ornamental MS framed work such as grills, gate, gratings etc with end of bars shouldered and revets welded etc framed guard bars barrel iron door ladder framed balusters walk ways, railing, conforming to Fe-290, Gde-E-165,including, complete all as specified and as directed.
Providing PCC (1:3:6) type C-2 as in surface channels and drains including necessary from work complete all as specified and as directed.
Forming fair finished drain or channel any inner girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends incomplete all as specified and as directed.
Add or deduct for 25mm girth or part there of over or under 30cm girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc. complete all as specified and as directed.
M&L for 25mm thick PCC(1:2:4) type 'B-1' (using 20mm graded crushed stone aggregate) as in floor finished fair and even without using extra cement complete all as a specified and as directed
(E/M PORTION) Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.
M & L for concealed type point wiring with 1.50 sqmm (nominal area) FRLSH insulated and unsheathed mold stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/celling including mold steel terminal boxes 1.25 mm thick conforming to IS - 5133(Part -I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked ) for mounting switches/ regulator / bell push etc including 1.50 Sqmm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point / bell point/ ceiling fan / exhaust fan point controlled by one way switch complete all as specified and directed. (a) One light/fan point controlled by one switch
All as per item No 121 but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
All as per item No 121 but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
Description all as per item No 121 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green copper conductor as continuous earth wire with lugs complete all as specified and directed.
S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.
S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.
S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.
S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.
S & F Modular Bell push 6A, 1 module complete all as specified and directed.
S & F Modular Fan step regulator, 120W- 2 module complete all as specified and directed.
S & F Modular Blank plate, 1 module complete all as specified and directed.
S & F Modular type White cover plate with frame 3 module complete all as specified and directed.
S & F Modular type White cover plate with frame 4 module complete all as specified and directed.
S & F Modular type White cover plate with frame 8 module complete all as specified and directed.
S & F Modular type White cover plate with frame 12 module complete all as specified and directed.
S & F Modular type Metal Flush box 3 module complete all as specified and directed.
S & F Modular type Metal Flush box 4 module complete all as specified and directed.
S & F Modular type Metal Flush box 8 module complete all as specified and directed.
S & F Modular type Metal Flush box 12 module complete all as specified and directed.
S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Philips / Crompton /Havells.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S & F North West Socket for AC short circuit protection motor starter with MCB DP 25 Amps capacity AC 230 Volt with Plug Top with Indicator Cat No. ACPU6M-BT, make :Wipro( North-West) or Equivalent in L&T/Legrand /Schneider
Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.
M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including all making good, PVC casing-caping of suitable size, surface type all as directed.
All as per Srl. Item No. 145 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor.
All as per Srl. Item No. 145 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.
M & L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through & including PVC conduit of suitable size in Surface/concealed all as directed.
Taking down of Old MCB DB any type any size including MCBs etc complete all as specified and directed.
S & F Sheet metal enclosure for MCB DB double door 415V Triple pole & Neutral 4 way with common bus bar complete all as specified and directed.
S & F Sheet metal enclosure for MCB DB double door 240V single pole & Neutral 4 way with common bus bar complete all as specified and directed.
S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 amps rated bus bar complete all as specified and directed.
S & F MCB 'C' curve single pole neutral , 32 Amps with breaking capacity 10kA, cat no.408617make: Legrand or equivalent of L&T/Havells.
S & F MCB 'C' series single pole 5 to 32 Amps, breaking capacity 10KA. Cat No. 408587, Make: Legrand or equivalent of L&T/Havells
S & F MCB four pole , 63 Amps with breaking capacity 10kA, complete all as specified and directed.
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.
RAJ ENTERPRISE
DUTTA & DUTTA
M/S S. K. SARKAR
MS AP CONSTRUTION AND CO
M A ENTERPRISES
DEB AND COMPANY
Somani Builders
MS HORIZEN
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .