Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹38.6 L+₹83,153 (2.20%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹41.0 L+₹3.2 L (8.35%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹43.9 L+₹6.1 L (16.1%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹44.2 L+₹6.4 L (17.0%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-12/2022-2023 CERTAIN MISC WORKS AND WELCOME MAINT IN JCOS/ OR MD ACCN IN MAP QTRS AND SEC F UNDER AGE B/R I AT CHANDIMANDIR
2022_MES_519855_1
GE/CHM-12/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹90,000
Yes
23 Jun 2022
25 Apr 2022
2 Jun 2022
25 Apr 2022
26 May 2022
19 May 2022
60 days
Amount
Taking down wooden chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down wooden chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each and removing from site complete all as specified & directed.
Refixing shutter in same opening of any description exc 1sqm and n exc 2 sqm each including taking down, easing and adjusting ,renewal of unserviceable screws and also refixing builders hardware as required etc complete all as specified & directed by Engineer-in-charge.
Hacking out old broken glass ( any thickness) size quality etc from metal frames fixed with pin, beading or oil putty complete all as specified and directed.
Galvanized MS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm, fixed as in repaircomplete all as specified and directed.
Drapery rod (conduit) of dia not less than 25mm having a corrugated virgin PVC extrusion on its surface and ABS plastic rings and finials of approved shed with standard MS powder coated brackets, fixed to walls with rawl plugs and steel screws fixed as in repair complete all as specified and directed.
4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Petty repair welding work as in welding to butt hinges / tower bolts to old angle iron frame / pressed steel door frame / steel windows make smooth as required, thickness of metal not exceeding 6mm complete all as specified and directed.
Steel window (ERW tube 'P' section), with side hung shutters, doetailed or welded including pintol hinges, steel handles etc as shown without glazing bars including one shop coat of red oxide zinc chrome primer, fixed as in repair complete all as specified and directed.
Steel window (ERW tube 'P' section), with side hung shutters, doetailed or welded including pintol hinges, steel handles etc as shown T-section glazing bars including one shop coat of red oxide zinc chrome primer, fixed as in repair complete all as specified and directed.
Steel ventilator factory made with (ERW tube 'P' section) side hung shutter including hinges, steel peg stay, a shop coat of red oxide zinc chrome primer, fixed as in repair complete all as specified and directed.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with single piece extruded PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of single piece extruded PVC profile for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed by Engineer-in-charge.
Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixing in opening at site all as specified & directed.
Factory made plain framed panelled shutters, 35mm thick (with two panel) of 2nd class hard wood with lock rail and panels of 9mm thick commercial ply duly hammer marked. The size of rail & style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated including a shop coat of pink primer complete all as specified & directed.
Glazed and gauged Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Flush shutters 25mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.
Flush shutters 35mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.
2nd class hardwood boarding 20mm thick, planed one side and butt joints, fixed with nails cupboard shelf, fixed as in repair complete all as specified & directed.
Factory made pressed steel frames of profile width 75mm x 50mm fabricated from 1.25 mm thick sheet, for cupboard/ shelves with double rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of priming, and back filled with PCC 1:3:6 type C-1 complete all as specified.
Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for Cupboard/ shelves with double rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of priming, and back filled with PCC 1:3:6 type C-1 complete all as specified.
Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of priming, and back filled with PCC 1:3:6 type C-1 complete all as specified.
Mild steel sliding door bolt 300mm long, clip and bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate including necessary welding, fixed as in repair complete all as specified and directed.
150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
150mm long aluminum handle cast type anodized complete all as specified
Butt hinges, cold rolled steel medium weight 100mm long for fixing to steel chowkhats complete all as specified & directed.
Hasp and staple 100mm size, safety type aluminum anodized including bolt to hinge plate, fixed as in repair all as specified and directed.
Two coats of synthetic enamel paint over one coat of red oxide primer on steel and iron surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed.
Two coats of synthetic enamel paint on steel and iron surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified & directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165, fixed as in repair complete all as specified & directed by Engineer-in-charge.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) or PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, and removal of rubbish outside MoD land, complete all as specified and directed.
Taking up or down steel tubing and connections 15mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed
Taking up or down steel tubing and connections 20mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed
Steel water tubes, 15mm bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
All as per item No. 37 hereinbefore but except GI pipe using old pipe retrieved
Steel water tubes, 20mm bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
All as per item No. 39 hereinbefore but except GI pipe using old pipe retrieved
15mm dia KITEC composite PR pipes 1520 as per IS 15450:2004 including necessary fittings, fixed as in repair complete all as specified and directed.
20mm dia KITEC composite PR pipes 2025 as per IS 15450:2004 including necessary fittings, fixed as in repair complete all as specified and directed.
KITEC composite PR Socket 15mm dia as per IS 15450:2004 including necessary fittings, fixed as in repair complete all as specified and directed.
KITEC composite PR Tee 15mm dia as per IS 15450:2004 including necessary fittings, fixed as in repair complete all as specified and directed.
KITEC composite PR elbow 15mm dia as per IS 15450:2004 including necessary fittings, fixed as in repair complete all as specified and directed.
PVC (SWR) floor trap 75mm bore, plain with grating and jointing with solvent cement, fixed as in repair complete all as specified and directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.
Vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, (excluding fixing bolts, flushing cistern and flush pipe), fixed as in repair inclunding making good the disturbed surface and to match with existing surface, complete all as specified and directed.
Stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms ) for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Angular stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Bib tap standard of PTMT, of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms) for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Bib tap long body with wall flange, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. Make: ESS ESS croma series C-209 or equivalent in Prayag/ Jaquar.
Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. Make: ESS ESS Croma series C-209 or Equivalent in/ Prayag /Jaquar.
Wash hand basin, vitreous china, flat back , white , of size 550X400mm fixed on and including angle brackets, fixed as in repair complete all as specified and directed.
32mm dia waste coupling of PTMT any colour high-pressure screwed for iron pipe and fixed (minimum weight 45 gms), fixed as in repair complete all as specified and directed.
15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed. Make: ESS ESS Croma series C-210A or Equivalent in Prayag /Jaguar.
Wash hand Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed. Make: ESS ESS croma series C-210A or Equivalent in prayag/ jainko.
Shower rose, brass, chromium plated, fancy type, with swivel joints 195mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed
Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 250 but n.exc 500 litres and from mouths of circulating pipes etc complete all as specified and directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
15mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe fixed in repair complete all as specified and directed.
Float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210gms ), fixed as in repair complete all as specified and directed.
Float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 15mm bore pipe (minimum weight 142gms ), fixed as in repair complete all as specified and directed.
CP towel rail, cast copper alloy 600mm long wih and including CP brass screws , complete all as specified and directed.
Standard kit of PVC internal fittings for low level flushing cistern fixed as in repairs complete all as specified and directed
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed.
110mm bore PVC (SWR) bends any radius fixed as in repair complete all as specified and directed.
PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed.
75mm bore PVC (SWR) bends plain(any radius) fixed as in repair complete all as specified and directed.
CI bends with or without duck’s foot or heel rest suitable for 100mm bore pipe (any radius), diminishing pieces or tapers ( larger bore measured ) fixed as in repairs complete all as specified and directed.
Cast iron 'P' or 'S' trap, suitable for 100 mm bore CI pipes fixed as in repair, complete all as specified.
Waste fitting, brass chromium plated for glazed ware sinks, basin etc with long screw shanks and flynuts, flanges and bedded in red lead cement and other end fixed for 40mm bore pipe in repair complete all as specified and directed.
Bottle trap brass chromium plated for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap, having water seal of 25mm, suitable for 32mm bore pipe, fixed as in repair complete all as specified and directed.
32mm dia PVC waste pipe 800mm long with PTMT nut, fixed as in repair complete all as specified and directed.
Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed.
PVC cover with nut, bolt and screw etc suitable for water storage tanks of capacity 500 ltrs, fixed as in repair complete all as specified and directed.
Shelf of PTMT fixed with and including Chromium plated steel screws and plastic cleats (Minimum weight 300gms) fixed as in repair complete all as specified and directed.
Cast iron pipes, soil, waste and vent pipe 100mm dia bore, spun type, in any length with or without ears, in cement joint, fixed to walls with flat iron clamps etc, fixed as in repairs complete all as specified and directed.
Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm, with bowl of size 410mm x 330mm x 160mm incl fixing cantilever brackets and connection to union, pipe, including removal of old kitchen sink of stainless steel with brackets fixed as in repairs complete all as specified and directed.
Plate rack stainless steel 600mm x 600mm x 250mm with steel shelves, made out of 1mm thick sheet and hanging arrangement, fixed as in repairs complete all as specified and directed.
15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places outside the premises complete all as specified and directed.
Racking out joints in brick tiles laid flat in roof etc and flush pointing in cement and mortar (1:3) in and including racking out joints etc complete all as specified & directed.
Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.
Glazed ceramic tiles in vertical surfacestraight cut /edge , size 350mm x 250mm x 7mm /450mm x 350mm x 7mm thick ,joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 including taking down existing tile complete all as specified and directed.
Non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 including taking down existing tile complete all as specified and directed.
Non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 including taking down existing tile complete all as specified and directed.
Concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block and removal of debris of any description complete all as specified and directed
15-18mm thick baroda green marble stone slabs, width and length as ordered, best quality machine cut and granite polished to be fixed on kitchen platform, steps, pillars, floors etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing, over and including screed bed 15mm thick in cement mortar 1:6 and rounding off/bull nosing exposed edges and making holes for gas pipes etc including dismantling old tiles complete all as specified and directed.
Machine cut Kota Stone Slab flooring, 18 to 22mm thick, best quality (minimum size 55cm x 55cm) over and including cement screed bed 20mm thick in cement mortar 1:4, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, rubbing and polishing (mirror finish) including dismantling of existing stone slab complete all as specified and directed including dismantaling of existing stone slab.
Demolition of cement concrete of any description and in any position(in sunken portion) not other wise specifically provided for and removing all demolished material /debris exc 250m but n.exc 500m from the site and depositing where directed complete all as specified and directed.
Providing cement concrete (type B-0), 1:2:4 using 12.5mm graded stone aggregate on kerbs rounded or chamfered including and admixing Dr Fixit pidiproof LW @ 200ml per 50Kg cement bag complete all as specified and directed.
Applying waterproof coating in two layers with brushes using Dr Fixit Pidifin 2K (grey powder+white liquid), mix ratio 1:1½ (by volume) complete all as specified and directed.
Applying 15mm thick cement plaster in cement plaster in cement mortar 1:4 including and admixing Dr Fixit pidiproof LW @ 200ml per 50 kg cement bag all in complete as per manufactures specifications complete all as specified.
Hard core of broken brick of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 25cm thick, watered and rammed to a true surface for filling into the sunken portion complete all as specified & directed.
Plain cement concrete 1:2:4 (type-B-1) using 20mm graded stone aggregate 75mm thick for floor including and admixing Dr Fixit pidiproof LW @ 200ml per 50 kg cement bag including top coating using Dr Fixit URP, mix ratio 1:1½ (URP : Cement) complete as per manufactures specifications complete all as specified.
Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed.
Plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 50mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.
25mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in flooring, finished even and rough using extra cement complete all as specified and directed.
Repairs to leaking joints of CI pipes/ traps/ fittings etc after taking out old jointing material lead / cement, cleaning the joint thoroughly and filling new material lead / cement and sealing the joints with joint sealing compound (Dr Fixit or equivalent) and making the installation completely leak proof complete all as specified. Note : (i) The work pertains to the drain pipes/ fittings of the WC / bath of MAP quarters installed under side of the roofs. (ii) All the joints of pipes / traps / fittings of one WC / bath shall be measured as one unit and payment shall be made for each WC / bath as “Each Job”. (iii) The rates shall include for providing scaffolding etc as required.
Brick work with subclass ‘B’ bricks of old size, (min. compressive strength 100kg/Sqcm), built in CM (1:6), straight or curved on plan exc 6m mean radius, all as specified.
All as per Srl item No 105 above but except bricks.
Material and Labour Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
15mm thick rendering cement plaster in Cement and Sand mortar 1:4 over brick or concrete surfaces finished fair and even without using extra cement in complete all as specified and directed
15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
10mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directedng
10mm thick rendering in Cement mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement in patches area n.exc 3 Sqm complete all as specified & directed.
Dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in Cement and Sand mortar 1:3 complete all as specified and directed
Preparation of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Preparation of old plastered surfaces of walls and applying one coats of oil bound distemper complete all as specified and directed.
Preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed
Two coats of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed
Material and labour preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, over a coat of primer complete all as specified and directed.
preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Preparation of old plastered or un-plastered surfaces of walls and applying one coats of cement base paint, complete all as specified and directed.
High strength deformed TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.
High strength deformed TMT bars 8mm and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hoping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and directed.
Demolition of reinforced cement concrete of any description in any position complete all as specified and directed.
Reinforced cement concrete type A-1, 1:1½:3 (nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like, including demolition of old reinforced cement concrete complete all as specified and directed (reinforcement shall be measured and paid for separately).
Form work to soffits of suspended slabs such as roof slabs rough finished surface of concrete flat not exc 200mm thick complete all as specified and directed.
Factory made Precast RCC, M-35 (medium duty), man hole covers of size 600mm x 600mm x 75mm with plain faces, including MS frame, fixed as in repair complete all as specified.
Writing letters or figures (Block, Roman, Italic or indian) not exceeding 30 cm height with reflective sheet/tape , shade of sheet and size all as specified & directed by Engineer-in-charge.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.
Cutting out cracks to V section not exc 25 mm in depth and not exc on face in existing roofs or terracing ;cleaning out ,wetting and painted with shalitex primer and filled with sealing compond ,terplastic of STP or equivalent complete all as specified
Plain cement concrete 1:3:6 type C-1 using 20mm graded aggregate as in roof padding, roof kerbs rounded or chamfered on edges, complete all as specified & directed.
Rendering 15mm thick rendering on roof surfaces including flashings and junction of parapets etc finished even and fair in cement mortar 1:4 using wate proofing compound as per manufacturer's instruction after brushing cement slurry complete all as specified and directed
40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar 1:3 mixed with crude oil @ 5% by weight of cement on all as specified and directed.
All as per serial item No 132 herein before but except tiles –ditto-
3mm thick Atactic polypropylene polymer (APP), based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with five layer reinforced polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions , complete all as specified & directed.
18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in kitchen cabinet and cup board/ wardrobe fitted to chowkhats, with 6mm thick IInd class hard wood edging on exposed edges, fixed as in repair complete all as specified and directed.
18-19mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping fixed with nails, fixed as in repair complete all as specified and directed .
Dismantling of posts or struts of RCC/ steel any section incl taking out embedded portion and making good disturbed portion, including removal from site complete all as specified and directed
Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.
Plain cement concrete 1:3:6, nominal mix, type C-2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete, bed blocks etc, complete all as specified & directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
Supply only chain link fencing of 3.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item No 42 here-in-before. (ii) Unit weight (weight per Square Metre) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.
Mild steel round bars 10mm dia, for horizontal tie bars for fencing post etc including necessary welding with 50mm overlapping complete all as specified and directed.
Mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 10cm and n.exc 15cm long, diameter of shank 11-15mm , complete all as specified and directed.
Mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) and fixing at site complete all as specified and directed.
Two coats of synthetic enamel paint on steel and iron surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed.
Two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on primer on surfaces of any description n.exc 10 cm width or girth when unconnected with other painting or when painted in a different tint including preparation of new surfaces complete all as specified & directed.
Premier Constructions
M/s Om parkash
sham enterprises
M/S Dhanpati Construction
M/S CHOPRA & COMPANY
MS R G ENTERPRISES
Standard Const. Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .