Repairs and Painting works, including electrical maintenance, in Type-I Qtrs., Block-A, Nos. 1 to 12 at the BAU campus, Sabour, Bhagalpur

Removing dry or oil bound distemper,water proofing cement paintand the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:Old steel work (one or more coats)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of thickness 4 mm

Providing and applying white cement based putty of average thickness 1mm, of approved brand andmanufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Repairs to plaster of Thickness 12 mm to 20 mm in patches of area 2.5sq.meter sand under ,including cutting the patchin propers hape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement :4 fine Sand)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

Taking out existing wooden door shutter, repair bycutting, painting etc. and refixingof repaireddoor shutters toexisting door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing aluminium slidingdoor bolts, ISI marked, anodised (anodic coating not lessthan grade AC 10 as per IS:1868), transparentor dyed to required colour or shade, with nuts and screws etc. complete: 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not lessthan grade AC 10 as per IS: 1868), transparentor dyed to required colour or shade, with necessary screws etc. complete:

Providing and fixing aluminium handles, ISI marked, anodised (anodic coatingnot lessthan grade AC 10 as per IS: 1868) transparentordyed to required colour or shade, with necessary screws etc. complete:125mm

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter

Renewal of old putty of glass panes (length)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: one or more coats on old work

Providing and fixing factory made single extruded WPC {Wood Polymer Composite}solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonateand natural fibers {wood powder/ ricehusk/wheat husk) andnon toxi cadditives {maximum toxicity indexof 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N {Face) &900N (Edge), minimum compressive strength 50 N/mm, modulus ofelasticity850 N/mm and resistance to spread of flame of Class A category with propertyof beingtermite/borer proof,water/moisture proof andfire retardant and fixing with stainless steel butt hinges of required size with necessary full bodythreaded star headed counter sunk S.S screws, all asper direction of Engineer-In•Charge. {Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)30 mm thick

Providingand fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headedSS screws having minimum frame density of 750kg/cum, screw with drawal strengthof 2200N(Face)& 1100N (Edge), minimum compressive strengthof58N/mm, modulus of elasticity900 N/mmand resistance to spread of flame ofClassA category with property of eingtermite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SSdash fastenersof required diaand lengthcomplete as per direction of Engineer-In-Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). Note:ForWPCsolid door/windowframes, minus5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions onplussideshall beacceptable but no extra payment on this account shall be made.Frame size 45 x 70 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Providing and fixing water closet squatting pan (IndiantypeW.C.pan ) with 100mm sand cast Iron P or S trap,10 litre low fixtures complete, including cutting andmaking good thewalls andlevel white P.V.C.flushing cistern, including flushpipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wher ever required : White Vitreous chinaOrissa patternW.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15mmC.P. brass pillar taps, 32mmC.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing on wall face unplastidsed-PVC(working pressure 4kg per sqm) rain water pipes conforming to IS: 4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110 mm diameter

Providing and fixing on wall face unplasticised-PVC molded fittings /accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm bend

Carrige of material as per specification and direction of E/I.

Course Sand

Add diffrence cost as per specification and direction of E/I.

Cement

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2X2.5 sq. mm + 1X 2.5 sq. mm earth wire

2X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/, switch box including connections but excluding modular plate etc. as req u ired.

Supplying and fixing following modula'r switch/ socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required.

5/6 amps switch

3 pin , 5/6 amps socket outlet

15/16 amps switch

6 pin, 15/16 amps socket outlet

Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc directly on walll ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. (For Non-residential building)